Auf geht's

Chart-Muster

MES Fakeout with Target LinesHow this works for your trading: The Trigger: When the MES "pokes" above the 15-min high on low volume and closes back inside, the "FAKE UP" label appears. The Target: A Green Dotted Line (or circles) will immediately appear on your chart 10 points below the High. This is your mathematical exit for a "reversion" trade. Risk/Reward: Since the stop loss for a fakeout trade is usually just above the "poke" wick, a 10-point target on the MES often provides a solid 2:1 or 3:1 Reward-to-Risk ratio.
Pine Script® Indikator
von aabellini
Stable MES Fakeout AlertHow to read the new Dashboard Bright Red Cell: The market is at +1000 or higher. This is your "Don't Buy/Start Shorting" zone. Bright Green Cell: The market is at -1000 or lower. This is your "Don't Sell/Start Buying" zone. Faded Green/Red: The market is trending but not yet at a mathematical extreme. A Strategy Secret for the Reversal When the Dashboard turns Bright Red (TICK > 1000) and the price hits the Red VWAP Band, don't just market sell. Wait for the TICK value to start dropping (e.g., from 1100 down to 900). Wait for the first Red Candle to close on your 1-minute chart. Place your stop loss just a few ticks above the "swing high" created at the band. This "waiting for the turn" ensures you aren't trying to catch a speeding freight train.
Pine Script® Indikator
von aabellini
Vilantro Swing Points & Swing Failure Patterns (SFP) V1.0Vilantro Swing Points & Swing Failure Patterns (SFP) V1.0 Overview The Vilantro Swing Points & SFP indicator is a comprehensive Price Action tool designed for traders utilizing Smart Money Concepts (SMC) and Liquidity trading strategies. Based on the "Daily Sweep" methodology, this tool automates the identification of structural swing points, draws dynamic liquidity zones (boxes), and generates real-time signals for Swing Failure Patterns (SFP)—a high-probability reversal setup where price sweeps liquidity but fails to sustain the breakout. Key Features 1. Automated Swing Point Detection Identifies market structure using a classic 3-Candle Swing logic (as defined in standard price action theory). Swing High: A candle high surrounded by lower highs on the immediate left and right. Swing Low: A candle low surrounded by higher lows on the immediate left and right. 2. Dynamic Liquidity Zones (Boxes) Automatically draws Support (Green) and Resistance (Red) boxes extending from valid swing points to the right. These boxes represent untapped liquidity pools (stop losses and buy/sell limit orders) that institutional algorithms often target. Smart Cleanup: The indicator keeps your chart clean. Once a price level is interacted with (either swept or broken), the box stops extending automatically. 3. Swing Failure Pattern (SFP) Signals This is the core execution trigger of the indicator. It monitors the Liquidity Boxes for specific price behavior: Bearish SFP: Price wicks above a Resistance Box (sweeping the highs) but the candle closes back below the level. Interpretation: Buyers were trapped, liquidity was grabbed, and sellers are stepping in. Bullish SFP: Price wicks below a Support Box (sweeping the lows) but the candle closes back above the level. Interpretation: Sellers were trapped, liquidity was grabbed, and buyers are stepping in. How to Trade with Vilantro SFP V1.0 Identify the Trend: Use the automatically drawn boxes to see where the market has left "resting liquidity." Wait for the Sweep: Do not enter just because price touches a box. Wait for the candle to close. The Signal: Look for the "Bearish SFP" or "Bullish SFP" label. If the candle closes OUTSIDE the box: This is a Break of Structure (BOS) or continuation. Do not fade this. If the candle closes INSIDE the box (SFP): This is your rejection signal. Execution: As discussed in "The Daily Sweep" strategy: Once the SFP alert fires on a higher timeframe (e.g., Daily or 4H), drop to a lower timeframe to find a precision entry (such as a Fair Value Gap). Settings Swing Lookback: Defines the sensitivity of the swing points. Default is 1 (Standard 3-candle pattern). Increasing this number identifies only larger, macro pivot points. Extend Box Limit: Controls how far back the script looks for unmitigated levels. Colors: Fully customizable colors for Bull/Bear boxes and SFP labels to match your charting theme. Disclaimer This tool is for educational purposes only. Trading financial markets involves risk. Always combine this indicator with your own analysis and risk management.
Pine Script® Indikator
von Vilantro
Blockcircle Waveform BandsThe Blockcircle Waveform Bands is a comprehensive trend-following indicator built around a layered moving average ribbon system. The core idea is simple: when shorter-term averages stack above longer-term ones in proper sequence, the trend is healthy. When they compress, cross, or invert, something is changing. This indicator was developed to solve a common problem. Traders often clutter their charts with multiple moving averages, each added separately, each requiring manual tweaking. Waveform Bands consolidates everything into a single, unified view. You get fast, medium, and slow bands that expand and contract with momentum, change color based on trend direction, and provide clear reference points for entries, exits, and trend assessment. Also included is a configurable higher-timeframe bias band, which allows you to track the macro trend without switching timeframes. Most useful is following the 21W EMA and 20W SMA crosses. What Makes This Indicator Different While moving average ribbons are a well-known concept, this indicator extends beyond simple MA plotting in several meaningful ways that justify its protected source status. First, the indicator calculates a proprietary confluence score ranging from negative 100 to positive 100. This score is not just counting crossovers. It uses weighted contributions from band alignment, price position across multiple timeframe zones, and momentum confirmation via rate of change integration. The specific weighting logic and calculation method represent original development work not available in standard MA ribbon indicators. Second, the summary scoring system evaluates trend quality on a 0 to 100 scale using a multi-factor algorithm. Trend state contributes up to 35 points, band alignment contributes up to 30 points, price position contributes up to 20 points, and momentum confirmation contributes up to 15 points. This weighted approach provides objective trend measurement rather than relying solely on visual interpretation. Third, the signal generation framework offers five distinct signal methods, each with three sensitivity levels, creating fifteen unique configurations. This is a complete signal system with filtering logic, not simply MA crossover alerts. The interaction between signal type, sensitivity, and the optional trend filter creates a flexible framework that traders can calibrate to their specific style. Fourth, the optional smoothing layer applies additional processing after the base MA calculations are complete. This reduces noise and whipsaws during choppy conditions while maintaining responsiveness during genuine trend moves. These proprietary elements, particularly the scoring algorithms and signal framework, represent the original work that distinguishes this from standard open-source MA ribbons available elsewhere. Key Features Multi-Band Ribbon System: Three distinct bands covering short, medium, and long-term trend structure. The fast band uses configurable MAs with default periods of 8, 13, and 16 for immediate price action. The mid band spans 21 to 42 periods, capturing the intermediate swing structure. The slow band covers 50 to 60 periods, representing the underlying trend foundation. Each band can be independently toggled, colored, and adjusted. Flexible Moving Average Types: Choose from eight MA calculation methods including EMA, SMA, WMA, VWMA, HMA, DEMA, TEMA, and ZLEMA. Set a default type for all bands or override individually per band. Useful for those who prefer Hull MA smoothness or the responsiveness of DEMA and TEMA. Major Moving Averages: Built-in 200-period MA for institutional-level support and resistance. Pi cycle MA using 314 periods for longer-term cycle analysis. Fully customizable additional MA with adjustable length, type, and color. Clear visual distinction with configurable line widths. Higher Timeframe Bias Band: Dual MA system pulled from any higher timeframe you choose. Default configuration mirrors the popular 21-week EMA versus 20-week SMA setup. Both MAs are fully adjustable in length, type, and timeframe. Automatic bullish or bearish fill coloring based on which MA leads. Keeps macro context visible without leaving your current chart. Dynamic Trend Coloring: All bands automatically shift color based on detected trend state. Bullish alignment shows green spectrum, bearish shows red, neutral shows yellow. Trend Detection and Scoring: Algorithmic trend state detection based on band alignment and price position. Confluence scoring system weighing multiple factors from negative 100 to positive 100. Band alignment tracking showing whether each band is internally bullish or bearish. Band expansion and contraction monitoring for momentum assessment. Strength percentage calculation for trend conviction measurement. Signal Generation: Multiple signal type options including band crosses, price crosses, and full alignment signals. Three sensitivity levels to match different trading styles and timeframes. Optional filtering to show only signals confirmed by the slow band. Dashboard Display: Comprehensive table with summary score, bias direction, and trend status. Compact mode available for reduced screen footprint. Alerts: Pre-configured alerts for buy and sell signals. Trend change notifications when bias shifts bullish or bearish. Major MA cross alerts for the 200 MA and Pi MA. Band alignment alerts when all bands synchronize. Confluence threshold alerts for strong directional readings. How To Use Identifying Trend Direction: Look at the overall band structure first. In a healthy uptrend, the fast band sits above the mid band, which sits above the slow band. Price should be trading above the fast band or at least within it. The dynamic coloring gives you an instant read. If everything is green, the trend structure is bullish. Red means bearish. Yellow or mixed colors indicate transition or consolidation. Check the dashboard summary row for a quick score. Above 60 suggests a solid trend, while below 40 indicates weakness or chop. Using the Bias Band for Macro Context: The higher timeframe bias band tells you whether the larger trend supports your trade idea. If you are looking to buy on a daily chart, check whether the weekly bias band is bullish, meaning the fast MA is above the slow MA. When the price is above both bias MAs and the band is bullish, conditions favor long positions. When the price is below both and the band is bearish, conditions favor shorts or staying out. The fill color between the bias MAs changes automatically. Green fill indicates bullish macro bias and red indicates bearish. This is visible at a glance without checking numbers. Finding Entry Points: Look for pullbacks into the mid band during established trends. When the fast band compresses toward the mid band and then expands again, this often marks a continuation entry. Band crossings can signal new trend initiations. When the fast band crosses above the mid band with confirming price action, it suggests a potential long entry. The opposite applies for shorts. Use the signal markers as alerts to potential opportunities, but confirm with price action. A signal appearing while the price is holding above a key band carries more weight than one appearing in isolation. Managing Risk and Exits: The slow band often acts as a trailing stop reference during trends. As long as price holds above the slow band on pullbacks, the trend remains intact. This is not always true, but it serves as a helpful general guideline. Losing the mid band on a closing basis often warns that the move is weakening. This might prompt partial profit-taking or tightening stops. The 200 MA serves as a major support or resistance level. Trends that break below the 200 after an extended move often accelerate to the downside. Reading Momentum Through Band Width: When all bands are tightly compressed, expect a directional move soon. Compression represents energy building up. Expanding bands confirm momentum is present in the current move. Watch for continued expansion on trend days. Contracting bands during a trend may warn that momentum is fading, even if the price has not reversed yet. Combining Multiple Timeframes: Enable multi-timeframe mode to see higher timeframe MAs plotted on your current chart. Be careful with this as it can crowd the display, but it is useful for seeing different timeframes stacked together. This helps identify where significant support or resistance exists above your normal view. The bias band already provides macro context, but you can set it to different timeframes for different purposes. Day traders might use daily bias bands while swing traders might prefer weekly. How To Read The Table The summary row gives you the overall picture. A high score with bullish bias and strong trend status represents ideal conditions for trend-following entries. Individual band status rows tell you if any divergence exists between timeframes. If the fast band is bearish but mid and slow are bullish, you might be seeing a pullback rather than a reversal. Price position percentages show how extended the price is from each band. Extreme readings in either direction suggest potential mean reversion or exhaustion. Limitations This indicator is designed for trending markets and performs best when clear directional movement exists. During extended consolidation or ranging conditions, the confluence score may oscillate near zero and signals may produce mixed results. Like all moving average based systems, signals are lagging by nature. The indicator confirms trends rather than predicting them. Early entries require additional confirmation from price action or other methods. The default settings are optimized for daily and higher timeframes on crypto and forex markets. Intraday traders and those analyzing other asset classes may need to adjust the band lengths to match their specific conditions. This indicator should be used as part of a complete trading approach that includes proper risk management and position sizing. It is not intended as a standalone system. Getting Started Start with the default settings and observe how the indicator behaves on your preferred instruments and timeframes before customizing. The indicator works on all markets and timeframes, but the default MA lengths are optimized for daily and higher charts. For intraday trading, consider reducing the band lengths proportionally. Use the compact table mode if the full dashboard feels cluttered. The essential information remains visible while using less screen space. Set up alerts for trend changes and major MA crosses so you do not need to watch charts constantly. Let the indicator notify you when conditions change.
Pine Script® Indikator
von blockcircle
Anurag -Alpha Pro (NIFTY/BANKNIFTY) CALL/PUT Boxes Trend BadgeThis indicator gives CALL (buy) and PUT (sell) signals for Nifty and BankNifty using trend + confirmation filters. It trades only during NSE market hours and avoids noisy periods like the opening minutes and mid-day lull. It confirms direction using EMA trend, VWAP, ADX (trend strength) and RVOL (volume push) to reduce fake signals. It plots clear Entry, Stop Loss, and Target using ATR-based risk so levels adjust automatically to volatility. The green/red boxes show your target zone and stop zone visually, keeping the chart clean with only one active setup. The Trend Badge shows the current market state (Bullish / Bearish / Ultra) so you know the bias before taking a trade.
Pine Script® Indikator
von anu_tarang
Opening Range Breakout (ORB) with Dual Timezones + Auto-OffOpening Range (Dual TZ) + Auto-Off (Clean) This indicator plots a clean Opening Range Box (ORB) with ORH/ORL levels and a midline, built for traders who want structure without clutter. The main feature is Dual Timezone support, meaning you can run two separate Opening Ranges in parallel (TZ1 + TZ2) on the same chart — ideal if you track multiple market opens (e.g., NY + London) from one workspace. Key Features • Dual ORB sessions (TZ1 + TZ2) • Customization of both timezones, ORB principles (that suits you the best) • Run two independent opening range sessions simultaneously • Each has its own range calculation, box, ORH/ORL lines, labels, fill, and midline • Clean output (no targets, no breakout signals) • Focused on the core OR structure only • Great for discretionary trading and level-based execution • Separate Auto-Off for TZ1 and TZ2 • Automatically removes ALL drawings after a user-defined time (minutes after OR end) • Helps keep charts clean during the rest of the day • TZ1 and TZ2 can be disabled on different timers • Historical toggle • If Show Historical Data = OFF, the script deletes previous session drawings at the next session start • If ON, prior sessions remain visible What’s Drawn • Opening Range box (high/low during session) • ORH (Opening Range High) line + label • ORL (Opening Range Low) line + label • Midline (average of ORH/ORL) • Highlight fill between ORH/ORL Typical Use Cases • Track NY ORB + London ORB at the same time • Use ORH/ORL as intraday support/resistance anchors • Keep your chart clean with Auto-Off after your active trading window Notes • Works best on the 1/5 minute timeframes (the OR is session-based). • If both sessions overlap, drawings may overlap as well — that’s expected since both ORBs are active simultaneously.
Pine Script® Indikator
von Mouiii
Daily MA Rank Ladder: Signals EditionDaily MA Rank Ladder: Signals Edition is a daily trend overlay that turns moving averages into a ranked ladder and adds trade signals and live statistics on each symbol. The script is built to help you answer three questions at a glance 1. Where is price relative to the key daily averages and VWAP 2. What is the current trend and momentum state 3. How has the signal model behaved on this symbol in the recent past On the chart you get • A clean stack of daily moving averages and VWAP • Background trend shading that reflects bullish bearish or neutral conditions • Clear visual markers for entries exits and stop levels when signals are enabled On the right side you get a ranked ladder table • All key levels sorted by price with their current value • Direction arrows and daily percentage change • Short term and long term trend rows • RSI state row • Current stop level • Open PnL and secured PnL based on your position size settings • The next potential long and short levels the model is watching At the bottom of the table the script summarizes recent behavior • Number of trades in the chosen back test window • Hit rate overall • Long and short results separated • Total PnL in currency terms All calculations are anchored to daily data and the script is designed as an overlay you can run on any timeframe. You can use it purely as a dashboard or you can follow the signals that the model produces. The internal rules for entries exits and stop management are intentionally not documented in the description. They are based on daily moving averages volatility and momentum but the exact recipe is part of the signal engine and is not meant to be reverse engineered from this text. Inputs and options The key controls are 1. Moving average and RSI lengths 2. Back test window for statistics 3. Base position size 4. Scaling mode • How many legs the model can build into a position 5. Stop loss execution • Daily close only or intraday plus daily with optional buffer 6. Table placement and text size Signals and statistics can be disabled so that the script behaves as a pure moving average ladder without any trade prompts. ⸻ How to use it Typical use • Scan symbols with the script applied and look for clean alignment in the ladder and trend rows • Use the table to understand where price is relative to the major levels and how stretched or compressed the move is • Let the signals and the PnL stats support your decision making without treating them as orders from an automatic system You remain in full control of entries exits and position sizing. The script is there to give you structure and context every day. ⸻ Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. It is not a recommendation to buy or sell any asset. There is no guarantee that any signal or model will be profitable. All trading and investing involves risk including the risk of losing all invested capital. Past performance and any statistics shown by this script do not guarantee future results. By using this script you accept that • You are fully responsible for your own decisions • You should thoroughly test any approach in a back test and in paper trading before risking real money • You should size positions according to your own risk tolerance and financial situation Use this script as one input in your process not as an automatic system and not as a substitute for your own judgement.
Pine Script® Indikator
von Guten
BTC Pair Trading Scalper The BTC Pair Trading Scalper is a comprehensive technical analysis indicator specifically designed for scalping Bitcoin on 15-minute timeframes. This indicator combines pair trading strategies with multiple technical indicators to identify high-probability entry and exit points for short-term trades. ═══════════════════════════════════════════════════════════════════════════ KEY FEATURES ✓ PAIR TRADING ANALYSIS - Compares your BTC chart against a reference pair (default: BTCUSDT) - Calculates real-time spread percentage between pairs - Uses Z-Score statistical analysis for mean reversion opportunities - Identifies divergence and correlation breakdowns ✓ MULTI-INDICATOR CONFLUENCE - Fast EMA (9) and Slow EMA (21) for trend direction - SMA (50) for overall trend confirmation - RSI (14) with customizable overbought/oversold levels - MACD for momentum analysis - Bollinger Bands for volatility and price extremes - ATR for volatility measurement ✓ VOLUME CONFIRMATION - Volume moving average analysis - Volume spike detection to validate signals - Filters out false signals in low-volume conditions ✓ ADJUSTABLE SIGNAL SENSITIVITY - HIGH: More frequent signals for active scalping (suitable for experienced traders) - MEDIUM: Balanced approach with confirmed signals (recommended for most traders) - LOW: Conservative signals with multiple confirmations (suitable for risk-averse traders) ✓ REAL-TIME DASHBOARD Displays at-a-glance information: - Current RSI level with color coding - MACD trend direction - Spread percentage between pairs - Z-Score for mean reversion - Volume status (High/Normal) - Overall trend direction (UP/DOWN/NEUTRAL) - Current ATR value for stop-loss sizing ✓ COMPREHENSIVE ALERT SYSTEM - Buy signal alerts - Sell signal alerts - Spread threshold breach alerts - Oversold condition alerts - Overbought condition alerts ═══════════════════════════════════════════════════════════════════════════ HOW IT WORKS SIGNAL GENERATION LOGIC BUY SIGNALS are generated when: - Fast EMA crosses above Slow EMA (bullish crossover) - Price is in an uptrend (above 50 SMA) - RSI shows bullish momentum - MACD confirms upward momentum - Volume spike confirms the move - Sensitivity settings are met SELL SIGNALS are generated when: - Fast EMA crosses below Slow EMA (bearish crossover) - Price is in a downtrend (below 50 SMA) - RSI shows bearish momentum - MACD confirms downward momentum - Volume spike confirms the move - Sensitivity settings are met PAIR TRADING COMPONENT The indicator monitors the spread between your chart and the pair symbol. When the spread deviates significantly (measured by Z-Score), it signals potential mean reversion opportunities: - Z-Score < -1.5: Pairs have diverged, potential buy opportunity - Z-Score > 1.5: Pairs have diverged, potential sell opportunity ═══════════════════════════════════════════════════════════════════════════ VISUAL ELEMENTS ON-CHART DISPLAY: - Blue line: Fast EMA (9) - Short-term trend - Orange line: Slow EMA (21) - Medium-term trend - Purple line: Trend SMA (50) - Long-term trend filter - Gray bands: Bollinger Bands showing volatility - Green "BUY" labels: Long entry signals - Red "SELL" labels: Short entry signals - Background tint: Green (uptrend) / Red (downtrend) DASHBOARD (Top-Right): Color-coded metrics for quick decision making: - Red: Overbought/Warning conditions - Green: Oversold/Bullish conditions - Yellow: Neutral/Elevated conditions - White: Normal conditions ═══════════════════════════════════════════════════════════════════════════ RECOMMENDED SETTINGS BY TRADING STYLE AGGRESSIVE SCALPING (High Frequency) - Signal Sensitivity: HIGH - Timeframe: 15 minutes - Expected trades: 5-10 per day - Risk level: Higher - Skill level: Advanced BALANCED SCALPING (Recommended) - Signal Sensitivity: MEDIUM - Timeframe: 15 minutes - Expected trades: 3-5 per day - Risk level: Moderate - Skill level: Intermediate CONSERVATIVE SCALPING (Quality over Quantity) - Signal Sensitivity: LOW - Timeframe: 15 minutes - Expected trades: 1-3 per day - Risk level: Lower - Skill level: Beginner to Intermediate ═══════════════════════════════════════════════════════════════════════════ BEST PRACTICES FOR SCALPING 1. RISK MANAGEMENT - Use ATR value from dashboard to set stop-losses (1.5-2x ATR) - Risk no more than 1-2% per trade - Use proper position sizing 2. ENTRY STRATEGY - Wait for volume spike confirmation - Ensure trend alignment (dashboard shows clear UP/DOWN) - Look for RSI confirmation (not in extreme zones for trend trades) - Check Z-Score for pair divergence opportunities 3. EXIT STRATEGY - Take profits at opposite signal or predetermined targets - Use trailing stops to protect profits - Exit if volume dries up or trend reverses - Monitor spread returning to mean 4. MARKET CONDITIONS - Works best in trending or ranging markets - Less effective during major news events - Avoid trading during extremely low volume periods - Most active during major market sessions (NY, London, Asia) 5. PAIR SELECTION - Use highly correlated BTC pairs (BTCUSDT, BTCUSD, BTCBUSD) - Ensure both pairs have sufficient liquidity - Monitor spread threshold to avoid excessive divergence ═══════════════════════════════════════════════════════════════════════════ CUSTOMIZATION OPTIONS You can adjust all parameters to match your trading style: PAIR TRADING - Pair Symbol: Choose your reference BTC pair - Spread Threshold: Set alert level for spread divergence - Show Spread: Toggle spread display on/off MOVING AVERAGES - Fast EMA: Adjust for faster/slower signals - Slow EMA: Adjust for trend confirmation - Trend SMA: Change long-term trend filter RSI - RSI Length: Modify sensitivity - Overbought/Oversold levels: Set your thresholds MACD - Fast/Slow/Signal lengths: Fine-tune momentum detection BOLLINGER BANDS - Length: Change volatility period - Multiplier: Adjust band width VOLUME - Volume MA Length: Modify average period - Volume Threshold: Set spike sensitivity ═══════════════════════════════════════════════════════════════════════════ ALERT SETUP To receive notifications: 1. Click the "Alerts" button in TradingView 2. Select "BTC Pair Trading Scalper" 3. Choose alert type: Buy Signal, Sell Signal, Spread Alert, etc. 4. Set notification method (email, SMS, app notification) 5. Click "Create" ═══════════════════════════════════════════════════════════════════════════ IMPORTANT DISCLAIMERS ⚠ This indicator is a TOOL, not a trading system ⚠ No indicator is 100% accurate - always use proper risk management ⚠ Past performance does not guarantee future results ⚠ Scalping requires quick decision-making and emotional discipline ⚠ Always backtest and paper trade before using real capital ⚠ Consider transaction costs and slippage in your strategy ⚠ This is not financial advice - trade at your own risk
Pine Script® Indikator
von sikatori
Adaptive Trade Probability Gate (TRADE / NO TRADE) v1.1This indicator is a context and probability filter, not a buy/sell signal. It estimates the real-time probability that a trade will succeed by combining: Broad market conditions (index behavior, volatility, participation) Current stock structure (directional efficiency, relative strength, exploitability) The output is a single decision: TRADE → conditions are favorable; trades have positive expectancy NO TRADE → conditions are hostile; even good setups tend to fail The model adapts automatically to changing markets — it is not tuned to a fixed holding period, strategy, or regime. It reflects whether the market is forgiving or hostile right now, and whether the specific stock is worth engaging. This indicator is designed to be used before entry to: Filter low-quality trades Adjust position size based on probability Set realistic expectations for follow-through It does not generate entries or stops. It helps you decide when to trust your setups and when to stand aside.
Pine Script® Indikator
von raghav2493
FVG CreativeTraderFVG Indicator - Overview What It Is A multi-timeframe Fair Value Gap detector for Smart Money Concepts trading. Fair Value Gaps are price imbalances where institutional traders moved so quickly they left unfilled orders. These zones act as magnets, with price often returning to fill them, creating high-probability trade setups. Key Features Track up to 10 timeframes simultaneously (1-min to monthly) with each timeframe color-coded for easy identification. FVGs appear as boxes on your chart with customizable labels, and automatically disappear when filled to keep your chart clean. Consequent Encroachment (CE) lines mark the 50% midpoint of each FVG for precision entries with tighter stops. How to Use Set your preferred timeframes (e.g., 15M, 1H, 4H for day trading), customize colors per timeframe, and enable "Delete boxes after fill" for a clean workspace. Enter trades when price returns to higher timeframe FVGs, using the CE line for tighter entries. Memory-optimized to track 100 FVGs per timeframe without lag, with built-in filtering to hide lower timeframe noise when needed. Key Features ✅ 10 Independent Timeframes - Track FVGs from 1-minute to monthly charts ✅ Auto-Mitigation Detection - Knows when FVGs are filled ✅ Custom Colors Per Timeframe - Never confuse different timeframes ✅ Consequent Encroachment (CE) Lines - 50% midpoint of each FVG ✅ Flexible Display Options - Show/hide any timeframe instantly ✅ Box Length Control - Extend FVG boxes as far as needed ✅ Label Customization - Size, position, and color control
Pine Script® Indikator
von The_Creative_Trader