Peak Trading Activity Graphs [LuxAlgo]The Peak Trading Activity Graphs displays four graphs that allow traders to see at a glance the times of the highest and lowest volume and volatility for any month, day of the month, day of the week, or hour of the day. By default, it plots the median values of the selected data for each period. Traders can enable the Median Delta feature to further highlight differences in the data. The graphs are customizable in width and height and feature gradient colors by default.
🔶 USAGE
The tool is simple yet powerful. Using the three main parameters on the settings panel, traders can display up to four different graphs and up to 16 different configurations.
There are two main types of data: volume and volatility. There are also four different time periods: months, days of the month, days of the week, and hours of the day. There is also the possibility of displaying the raw medians or the delta between them.
Understanding which time periods have the most and least volume and volatility is essential for any trader. From avoiding trading during periods of low volume to properly sizing positions during periods of high volatility, there are multiple use cases directly related to improving execution and risk management.
🔹 Months
This chart shows the monthly volume and volatility of NQ as medians at the top and as the delta of medians at the bottom.
As we can see on the left-hand chart, the volume is fairly consistent throughout the year. January, March, and October have the highest volume, and December has the lowest volume for obvious reasons. Note the bottom chart with the delta feature enabled, which clearly shows the top and bottom periods.
On the right, we have volatility, which is also evenly distributed throughout most months. October is the most volatile month, and March is the least volatile month. The differences are also very clear on the bottom chart with delta enabled.
Traders may want to compare median volatility and volume by month to size positions and favor exposure during historically high-activity months.
🔹 Days of Month
The same NQ charts are shown, but in this case, the Days of Month period has been selected. As you can see, this displays a calendar-like graph. The volume is on the left, the volatility is on the right, and the delta feature is enabled on the bottom charts. This feature allows for stronger differences in gradient.
The top charts show that the raw medians of both volume and volatility are evenly distributed. We need to enable the delta feature on the bottom charts to see where the most and least volume and volatility are.
Traders can use median activity by calendar day to anticipate liquidity expansions or contractions and adjust trade frequency.
🔹 Days of Week
In this case, we have BTC charts with the same layout as before. Notably, the difference in volume on weekends is not as pronounced from a volatility perspective on those same days.
A practical use case can be differentiate high-risk, high-participation weekdays from low-activity sessions to select trend or range-based strategies.
🔹 Hours of Day
This shows the volume and volatility of each hour of the day for gold futures. As we can see, the most volume and volatility occur during the three hours around the RTH open at 8:00, 9:00, and 10:00 a.m.
Traders may want to isolate hours with the highest median volatility and volume to concentrate execution and avoid low-liquidity periods.
🔹 Assets Comparison
This tool allows us to compare different assets over the same period. In this case, we are comparing the hours of the day for 10-year notes, the S&P 500, silver, and the yen. Each asset has a different volatility profile throughout the day.
With the Delta feature enabled, we can clearly see the differences. The 10Y Notes move from 7:00 to 9:00 and from 2:00 to 9:00. The Yen moves from 7:00 to 9:00 and from 2:00 to 9:00. Silver moves from 8:00 to 10:00. The S&P 500 moves from 8:00 to 9:00 and from 14:00 to 15:00. All times are in exchange time.
🔹 Sizing & Coloring Graphs
Traders can adjust the width and height of the graphs, as well as the text size, at will.
Traders can choose from four different color configurations in the settings panel.
🔶 SETTINGS
Data: Select the type of data to display: Volume or Volatility.
Period: Select the time period to display: Month, Day of Month, Day of Week, or Hours.
Display delta between medians. Display the difference between the medians as a percentage. The smaller median is 0 and the larger median is 100. Enabling this feature highlights the differences between values.
🔹 Graph
Graph: Select the graph location.
Size: Select the graph size.
Width: Select the graph width.
Height: Select the height of the graph.
🔹 Style
Colors: Select a color map: Viridis, Plasma, Magma, or Custom.
Custom Cold: Select a custom color for cold (low values).
Custom Lukewarm: Select a custom color for lukewarm (medium values).
Custom Hot: Select a custom color for hot (high values).
Chart-Muster
Supply Demand Zones ProSupply Demand Zones PRO
Version: 1.0
Built with: Pine Script v6
________________________________________
🧭 HOW TO USE Start Here
🧠 What it does default behavior
• ✅ Automatically identifies Supply & Demand zones on your chart
• ✅ Automatically ranks each zone from 0 to 10 higher = stronger
• ✅ Works across most TradingView symbols and timeframes with default settings
⚙️ Default settings recommended for most instruments
Use the default settings for:
• 💱 Forex
• 🪙 Crypto
• 📊 Indices
• 🛢️ Commodities
• 🏛️ Stocks
Defaults are tuned to provide a balanced mix of quality zones + clean charts.
🎯 How to trade with it high-level workflow
1. 🥇 Prioritize strong zones
o Focus on higher scores commonly 7–10 for best reversal potential.
2. 🔄 Wait for a reversal setup at the zone
o Example triggers: rejection wick, engulfing candle, strong reaction candle, structure shift.
3. ✅ Confirm with other indicators before entering
o Use confirmation tools (your choice), such as:
📈 Trend filter (MA / market structure)
🧪 Momentum (RSI / Stoch / MACD)
📉 Volume / volatility tools
o Then take BUY from demand or SELL from supply *only when confirmation aligns
🧩🖤 Executive Summary: PRO Features Overview
The Supply Demand Zones PRO indicator is a professional-grade tool built on the latest Pine Script v6, designed to automatically identify and score high-probability supply and demand zones.
It moves beyond simple zone plotting by incorporating a suite of advanced features that provide a deeper, more actionable market context. This helps traders filter out noise, focus on significant levels, and make more informed decisions.
The indicator is universally compatible and works seamlessly across all major asset classes and timeframes:
• Forex: EURUSD, GBPUSD, USDJPY
• Commodities: Gold/XAUUSD, Silver, Oil
• Indices: NQ, ES, DAX, FTSE
• Cryptocurrencies: Bitcoin, Ethereum, Altcoins
• Stocks: Individual equities
Most symbols available on TradingView are fully supported.
Notice on repainting 🕯️⬛
Active zones won’t repaint unless they are invalidated. Gray/Historic zones may repaint, and that’s fine—this script only displays the most recent and stronger historic zones (if historic zones are enabled).
________________________________________
⬛🛠️Key PRO Features Overview
⚙️ Feature 📌 Description
Zone Strength Ranking ||| Each zone is dynamically scored from 1–10 based on its age and number of retests. Fresher, less-tested zones are stronger, helping prioritize high-impact levels.
Real-Time Distance ||| Each active zone’s info label shows the exact distance (in pips) from current price to the zone edge for quick risk/opportunity assessment.
Trading Session Tracking ||| Zones are tagged by formation session (Asian / London / New York) for added context—high-volume session zones often matter more.
Automated Retest Markers ||| The script tracks retests and places an “R” marker for each retest, giving a clear visual history of price interaction.
Advanced ATR Filtering ||| Volatility-based filters control zone quality: set min/max zone height and optionally enforce a consistent zone height using ATR.
Minimum Zone Distance ||| Reduces clutter by requiring a minimum number of bars between new zones, ensuring zones are distinct and well-separated.
Dual Label Controls Independently toggle info labels for Active vs Historic zones to keep charts clean while preserving key detail.
Built on Pine Script v6 ||| Uses the newest Pine Script version for better efficiency, reliability, and smoother handling of complex logic/drawings.
________________________________________
Detailed Feature Breakdown ⬛
Zone Strength Ranking ⬛
The strength score is a proprietary calculation that helps traders instantly gauge the potential of a supply or demand zone. It is calculated in real time using:
1. Age of the Zone: As zones age, they may lose relevance. Strength decreases as the number of bars since creation increases.
2. Number of Retests: The first test is often the highest-probability reaction. Each retest reduces strength as liquidity is absorbed.
✅ A high score (7/10+) indicates a fresh, less-tested zone that may produce a strong reaction.
⚠️ A low score suggests a zone is old and/or heavily tested—use extra caution.
________________________________________
🧱⬛Invalidation & Historic Zones
A zone becomes invalidated broken when price closes beyond its outer boundary or wicks beyond it, depending on settings. Once broken, it becomes a Historic Zone and turns gray.
This matters for structure: a broken supply zone can become future demand a flip zone, and vice versa.
________________________________________
🧪⬛Advanced Filtering Explained
Three ATR-based filters control zone quality:
• Max Zone Height (ATR Multiplier): Blocks zones that are too large to trade effectively. Example: 1.0 ignores zones taller than 1× ATR.
• Min Zone Height (ATR Multiplier): Filters out zones that are too thin and likely noise. Example: 1.0 rejects zones smaller than 1× ATR.
• Force Zone Height (ATR Multiplier): Normalizes zone heights by expanding smaller valid zones up to the minimum ATR target. Example: 1.0 expands zones to at least 1× ATR.
________________________________________
🧾⬛Configuration Guide
⚙️⬛Zone Detection
⚙️ Setting 🔧 Default 📝 Description
Swing Length (Sensitivity) 12 Lookback bars for pivot high/low detection. Higher = fewer, stronger zones.
Max Zones to Display 10 Max number of active Supply + Demand zones shown.
Max Zone Height (ATR) 1.0 Rejects zones taller than this ATR multiplier.
Min Zone Height (ATR) 1.0 Rejects zones smaller than this ATR multiplier.
Force Zone Height (ATR) 1.0 Expands valid zones to be at least this ATR multiplier.
Min Distance Between Zones 44 Minimum bars required between consecutive zones of the same type.
________________________________________
🧱⬛Zone Settings
⚙️ Setting 🔧 Default 📝 Description
Zone Invalidation Close “Close” = candle must close past zone; “Wick” = wick past zone breaks it.
Show Historic Zones On Toggles visibility of broken (historic) zones.
Active Zones Lookback 1000 Hides active zones older than this many bars.
Historic Zones Lookback 1000 Hides historic zones older than this many bars.
________________________________________
🖥️⬛Display
⚙️ Setting 🔧 Default 📝 Description
Show Active Zone Info On Toggles text labels for active (unbroken) zones.
Show Historic Zone Info Off Toggles text labels for historic (broken) zones.
Label Size Small Adjusts the font size of zone info labels.
PaisaPani - BankNifty Demo PerformanceThis indicator displays a DEMO performance snapshot
to show how the PaisaPani approach behaves on BankNifty.
It is a trading system.
• Separate indicator designed specifically for BankNifty
• Intended for the mentioned timeframe only
• Focused on execution clarity, not predictions
🔒 Full access is limited.
Message “ACCESS” on TradingView if you want details.
⚠ Disclaimer:
For educational and demonstration purposes only.
Trading involves risk.
No profit guarantees are implied.
[TehThomas] - Order Blocks█ OVERVIEW
This Order Blocks indicator identifies institutional-level support and resistance zones using fractal pattern recognition combined with Fair Value Gap (FVG) filtering. Order blocks represent areas where large institutional orders have been placed, creating significant price reactions when retested. This indicator uses a 5-bar fractal pattern to detect market structure breaks and highlights the last bearish or bullish candle before a strong impulse move.
█ KEY FEATURES
- Fractal-Based Detection: Uses 5-candle fractal patterns to identify key market structure highs and lows
- FVG Filtering: Optional Fair Value Gap confirmation ensures order blocks are followed by true market imbalances
- Automatic Mitigation: Order blocks are automatically removed when price breaks through them
- Overlap Prevention: Prevents cluttered charts by avoiding overlapping order block zones
- Customizable Display: Full control over colors, labels, line heights (body/wick), and maximum blocks shown
- Dual Polarity: Detects both bullish (OB+) and bearish (OB-) order blocks independently
█ HOW IT WORKS
The indicator scans price action for fractal patterns where the middle candle forms a local extreme (highest high or lowest low among 5 bars). When price breaks above a fractal high or below a fractal low, the script identifies the last opposing candle in the impulse move as the order block.
For bearish order blocks, it finds the highest bullish candle before a fractal low is broken, marking institutional selling pressure. For bullish order blocks, it locates the lowest bearish candle before a fractal high is breached, indicating institutional buying.
When FVG filtering is enabled, the indicator confirms that a Fair Value Gap (a 3-candle imbalance where price leaves an unfilled gap) occurred within the specified distance from the order block. This combination increases the probability that institutional traders are present in these zones.
█ SETTINGS
Bullish Order Block Settings
- Show/hide bullish order blocks
- Customize fill color and border color
- Toggle OB+ label display
Bearish Order Block Settings
- Show/hide bearish order blocks
- Customize fill color and border color
- Toggle OB- label display
Label Settings
- Label size: Tiny, Small, Normal, or Large
- Label text color customization
General Settings
- Bars Back to Check (10-200): Lookback period for order block detection
- Filter by FVG: Requires Fair Value Gap confirmation
- Max Bars Between OB and FVG (1-6): Distance tolerance for FVG filtering
- Line Height: Choose between Body or Wick for order block boundaries
- Prevent Overlapping OBs: Avoids drawing overlapping zones
- Max Order Blocks to Display (1-50): Limits active blocks on chart
- Length of Boxes (10-100): Horizontal projection length
█ HOW TO USE
1. Add the indicator to your TradingView chart
2. Configure settings based on your trading timeframe and style
3. Watch for OB+ labels (bullish order blocks) as potential support zones where price may bounce
4. Watch for OB- labels (bearish order blocks) as potential resistance zones where price may reverse
5. Wait for price retracement to the order block zone before taking entries
6. Use confirmation signals like volume spikes or reversal patterns at the order block
7. Place stop loss just outside the order block boundary to manage risk
8. Monitor mitigation: Order blocks disappear when price breaks through them completely
█ TRADING STRATEGY EXAMPLES
Bullish Order Block Strategy
Wait for a market structure shift from bearish to bullish. When price creates a bullish impulse breaking a fractal high, identify the OB+ zone. Enter long positions when price retraces to test the bullish order block, placing stop loss 10-20 pips below the zone's low. Target previous highs or resistance levels.
Bearish Order Block Strategy
Monitor for market structure shift from bullish to bearish. After price creates a bearish impulse breaking a fractal low, locate the OB- zone. Enter short positions when price retraces to test the bearish order block, placing stop loss 10-20 pips above the zone's high. Target previous lows or support levels.
FVG-Confirmed Entries
Enable FVG filtering to only display order blocks validated by Fair Value Gaps. These aligned setups increase probability as they combine institutional order placement with market inefficiencies. Trade retracements to these high-confluence zones for better risk-reward ratios.
█ IDEAL FOR
- ICT Traders: Follows Inner Circle Trader methodology for institutional order flow
- Smart Money Concepts: Tracks where large players place orders
- Swing Traders: Identifies key support/resistance for multi-day holds
- Price Action Traders: Pure chart-based approach without lagging indicators
- Breakout Traders: Confirms structure breaks with fractal patterns
- Forex, Crypto, and Stock Markets: Works on all liquid markets and timeframes
█ TECHNICAL SPECIFICATIONS
- Max Boxes: 500
- Max Labels: 500
- Detection Method: 5-bar fractal pattern recognition
- Mitigation Logic: Automatic removal when price breaks order block boundaries
- Time Projection: Uses time offset calculations for box extension
- Array Management: Dynamic array cleanup to prevent memory issues
█ NOTES & DISCLAIMERS
- Order blocks work best when combined with overall market context and trend analysis
- Not all order blocks result in price reversals; use proper risk management
- FVG filtering may reduce the number of signals but increases quality
- Fractal patterns require 5 bars to form, causing a 2-bar delay in detection
- Works optimally on higher timeframes (4H, Daily) for institutional footprints
- This indicator does not guarantee profitable trades; always use stop losses
- Past performance of order blocks does not predict future results
- Compatible with other ICT concepts like liquidity sweeps and market structure
FLOW DEPTH Price BreathingFLOW DEPTH is a visual, psychology-based indicator designed to reveal how the market breathes through phases of compression and expansion. Instead of relying on traditional trend lines or lagging indicators, it focuses on the depth of price movement around its natural balance, allowing traders to feel market rhythm rather than chase signals.
The indicator paints a smooth flow line and subtle background shading to highlight whether the market is exhaling (expansion) or inhaling (compression). This creates a calm, premium chart experience while still delivering meaningful insight into momentum and price behavior.
FLOW DEPTH is ideal for traders who prefer clean charts, visual clarity, and market structure awareness without clutter. It works especially well on XAUUSD, BTC, and major forex pairs, across intraday and swing timeframes.
🔍 How to Use
Green flow → Market is expanding (momentum phase)
Red flow → Market is compressing (rest phase)
Flow shift dots → Transition between market phases
Use FLOW DEPTH as a context tool, not a signal generator. Combine it with price action, structure, or session logic for best results.
Bullish Market Structure HH HLThis indicator identifies bullish market structure by automatically marking Higher Highs (HH) and Higher Lows (HL) on the price chart using pivot-based logic.
It helps traders visually understand trend direction, structure strength, and key swing points without clutter or repainting.
🔧 How the Indicator Works
1️⃣ Pivot Lookback Input
The indicator uses a user-defined pivot lookback length
This value controls how many candles are required to confirm a swing high or swing low
2️⃣ Pivot High & Pivot Low Detection
Pivot High marks a confirmed swing high
Pivot Low marks a confirmed swing low
Pivots are confirmed only after price action completes, making the indicator non-repainting
📈 Market Structure Labels
🟢 Higher High (HH)
Displayed at confirmed swing highs
Indicates bullish momentum and trend continuation
Shown with a downward-pointing green label
🟢 Higher Low (HL)
Displayed at confirmed swing lows
Represents strong demand and trend support
Shown with an upward-pointing green label
✅ Key Features
Non-repainting pivot logic
Clean and minimal visual design
Works on all markets and timeframes
Beginner-friendly and professional-grade
📌 Trading Use Case
Identify bullish trends using HH–HL sequences
Confirm healthy pullbacks in an uptrend
Combine with support/resistance, trendlines, or higher-timeframe bias
⚠️ Disclaimer
This indicator is a market structure visualization tool, not a complete trading system.
Always use proper risk management and additional confirmation.
Break & Retest 369Break & Retest 369
The Break & Retest 369 is a high-precision technical indicator designed for price action traders who specialize in market structure shifts and "S/R Flip" (Support becoming Resistance and vice versa) strategies. Unlike standard oscillators that lag behind price, this tool focuses on **horizontal price levels** that have historically acted as turning points, providing visual zones where the market is likely to offer a "second chance" entry.
Core Philosophy
The script is built on the principle of Market Memory. In a trending market, a "Breakout" signifies a change in order flow. However, smart money often returns to the point of origin (the breakout level) to fill remaining orders or test the strength of the new trend. This indicator automates the identification of these "Retest" zones, which are often the highest-probability entry points for trend continuation.
How It Works: The Logic
The indicator follows a strict, multi-step calculation process:
1. Swing Point Identification: It utilizes a Pivot High/Low** algorithm. It scans for "peaks" and "valleys" that are isolated by a specific number of bars on either side (defined by the `Lookback` input).
2. **Breakout Detection:** The script monitors these pivot levels. A **Buy Zone** is triggered only when the price achieves a clean **Close** above a previous Pivot High. Conversely, a **Sell Zone** is triggered by a **Close** below a previous Pivot Low.
3. **Zone Construction:** Once a break is confirmed, the script draws a box centered exactly at the price level of the broken pivot.
4. **Forward Projection:** These zones are projected forward in time using the `Zone Extension` parameter, creating a visual "landing strip" for future price action.
### Key Features & How to Use It
* **Dynamic Support/Resistance Flips:** Green zones represent former resistance levels that are now expected to act as support. Red zones represent former support levels now expected to act as resistance.
* **Zone Customization:** Traders can adjust the `Zone Height (Ticks)` to account for market volatility or specific asset spreads (e.g., wider zones for XAUUSD, tighter for EURUSD).
* **Scannability:** The script helps traders filter out the "noise" of mid-range price movement and focus only on significant structural levels.
### Default Configuration
To get the most out of the **369** logic, the indicator comes pre-configured with the following defaults:
* **Swing Detection Lookback (18):** Optimized for medium-term structure, avoiding "micro-pivots" that lead to false signals.
* **Zone Height (1 Tick):** Focuses on the precise price point of the pivot for maximum accuracy.
* **Zone Extension (90 Bars):** Projects levels far enough to catch "deep" retests that occur several hours or days later.
---
### Pro Tip for Traders
Wait for price to return to a **Buy Zone** and look for a bullish rejection candle (like a pin bar or engulfing candle) before entering. This combines the "Where" (the zone) with the "When" (the price action confirmation) for a robust trading system.
Would you like me to add a **"Mitigation"** feature that automatically deletes or fades the zone once the price has successfully touched it?
XAU CAPITAL Premium ZonesXAU CAPITAL • Premium Support & Supply Zones is a minimalist yet powerful TradingView indicator designed for traders who prefer clarity over clutter.
This indicator automatically detects key Support and Supply zones based on pivot structure and price behavior, helping traders identify high-probability reaction areas where price is likely to pause, reverse, or continue.
🔍 Key Features:
✔ Automatically plotted Support & Supply zones
✔ Clean, transparent zones for clear price visibility
✔ EMA-based trend structure for directional bias
✔ Works smoothly on XAUUSD (Gold) and other markets
✔ Ideal for SMC, price action & intraday trading
✔ Non-repainting structure logic
🎯 Best Used For:
Gold (XAUUSD) trading
Intraday & swing setups
Entry refinement at key zones
Market structure & trend alignment
⚠️ This indicator is a technical tool and should be used with proper risk management and confirmation.
[COG] Platypus Platypus
Overview
Platypus is a volume momentum indicator that combines price action, volume analysis, and multi-timeframe confirmation to generate trade signals. Unlike traditional volume indicators, Platypus reconstructs volume momentum by factoring in price velocity, volatility adjustment, and market structure to identify true institutional momentum shifts.
The indicator features a comprehensive filtering system including EMA alignment, background state confirmation, and optional multi-timeframe filters to eliminate false signals and ensure you only trade with the strongest momentum.
Key Features
✅ Volume Momentum Calculation
Volatility-Adjusted Volume: Normalizes volume relative to recent volatility periods
Quiet Market Filtering: Reduces noise during low-activity periods
Spike Detection: Identifies abnormal volume surges with boosted weighting
Momentum Smoothing: EMA-based smoothing prevents erratic signals
✅ Entry Pattern Detection
3-Bar Pattern Requirement: RED → GREEN → GREEN for buys (opposite for sells)
State Management: Prevents consecutive signals in same direction without reset
Background Confirmation: Must align with bullish/bearish market state
EMA Alignment Filter: Ensures trend structure supports the trade direction
✅ Multi-Timeframe Filtering System
HTF Closed Bar Filter: Confirms last closed higher timeframe bar matches direction (no repaint)
HTF Momentum Filter: Requires current HTF bar to match direction (live, prevents delayed entries)
Dual-Filter Capability: Use both filters for maximum precision
✅ Dashboard
Real-time Status Monitoring: Volume trend, background state, EMA order, trade state
Filter Status Display: Shows HTF filter conditions and signal permission
Pattern Detection: Indicates when 3-bar entry pattern is forming
✅ On-Chart Integration
50/100/200 EMAs: Automatically plotted on price chart with customizable colors
Visual Entry Markers: Triangle signals appear on price chart at entry points
Signal Alerts: Built-in alert conditions for all signal types
📚 Core Settings Explained
signalPeriod = input.int(8, "Signal Period", minval=1, group="Core Settings")
Signal Period (Default: 8): Controls the smoothing of the signal line (blue line). Lower values = more responsive, higher values = smoother but slower to react.
volatilityPeriod = input.int(20, "Volatility Period", minval=1, group="Core Settings")
Volatility Period (Default: 20): Lookback period for volume and price range calculations. This period is used to normalize volume relative to recent market conditions.
priceFilterLength = input.int(200, "Price Filter MA Length", minval=1, group="Core Settings")
Price Filter MA Length (Default: 200): The SMA period used for background state determination. Price must be above this MA for bullish background, below for bearish background.
Advanced Settings
momentumMultiplier = input.float(50.0, "Momentum Multiplier", minval=20.0, maxval=80.0, step=2.0, group="Advanced")
Momentum Multiplier (Default: 50.0): Scales the final momentum score. Higher values = larger histogram bars and more sensitivity. Adjust based on your instrument's volatility.
momentumSmoothing = input.int(4, "Momentum Smoothing", minval=1, maxval=15, group="Advanced")
Momentum Smoothing (Default: 4): EMA period applied to raw momentum before normalization. Higher values reduce noise but add lag.
quietThreshold = input.float(0.3, "Quiet Market Filter", minval=0.0, maxval=1.0, step=0.05, group="Advanced")
Quiet Market Filter (Default: 0.3): During low-volume periods, this applies exponential dampening to momentum. Higher values = more aggressive filtering of weak moves.
volStrengthFactor = volRatio < (1.0 + quietThreshold) ? math.pow(volRatio, 2) : volRatio
When volume is less than average + threshold, it squares the ratio (dampening), otherwise uses linear scaling.
ICT Opening Gap Strategy [Momentum1]Momentum strategy taken off the close of the first candle after the NDOG/NWOG. Built with Gemini.
Smart Money Sessions + Liquidity + FVGSmart Money Sessions + Liquidity + Fair Value Gap is a clean and professional price-action based indicator designed for Gold (XAUUSD) and Forex traders who follow Smart Money Concepts (SMC) and ICT methodology.
This indicator focuses on where liquidity is taken, when structure shifts, and where imbalance (FVG) is created, without cluttering the chart or repainting signals.
🔍 Key Features
🕒 Session High & Low (Killzones)
Automatically plots Asia, London, and New York session highs and lows
Helps identify:
Asia range manipulation
London fakeouts
New York continuations
💧 Liquidity Sweep Detection
Detects wick-based liquidity grabs
Highlights areas where stop-losses are likely taken
Ideal for spotting smart money entries
🔁 Market Structure Shift (MSS)
Simple and clean bullish & bearish structure shifts
Helps confirm trend continuation or reversal
Non-repainting logic
📦 Fair Value Gap (FVG)
Uses true 3-candle imbalance logic
Highlights bullish and bearish FVG zones
Clean visualization without over-plotting
✅ Why This Indicator?
❌ No repainting
❌ No lagging indicators
❌ No unnecessary colors
✅ Based purely on price action
✅ Beginner-friendly & professional-grade
✅ Optimized for Gold (XAUUSD)
🎯 Best Use Cases
Gold scalping & intraday trading
London & New York session trades
Liquidity-based entries
ICT / Smart Money strategies
⚠️ Disclaimer
This indicator is a visual analysis tool, not a buy/sell signal generator.
Always combine it with proper risk management and your own trading plan.
ORB Algo | WolfOfFuturesThis Script is an updated version of the Flux Charts ORB Algo
15min ORB default
4EMA breakout Condition
Dynamic TP Default
Neeson Trend Price Oscillator Pulse EditionNeeson Trend Price Oscillator Pulse Edition: A Comprehensive Market Cycle Analysis Tool
Overview and Purpose
The Trend Price Oscillator Pulse Edition is a sophisticated technical analysis indicator designed to identify major market cycle tops and bottoms. This tool operates as a standalone oscillator in a subchart, providing clear visual signals of overbought and oversold conditions within the context of long-term market cycles. Developed for position traders and long-term investors, it focuses on capturing significant market turning points rather than short-term fluctuations.
Integration Rationale and Component Synergy
The indicator integrates three core analytical concepts into a cohesive system:
Detrended Price Oscillator (DPO) Foundation: Traditional DPO methodology isolates cyclical price movements by removing the underlying trend component. This creates a clearer view of oscillatory behavior without the distortion of long-term directional bias.
Normalization Framework: By converting raw DPO values to a standardized 0-100 scale, the indicator establishes consistent reference points for market extremes across different instruments and timeframes. This normalization enables meaningful comparison of oscillator readings regardless of absolute price levels.
Dynamic Threshold System: The implementation of adjustable threshold levels (default: 95% for overbought, 5% for oversold) creates adaptive boundaries that respond to changing market volatility and cycle characteristics.
These components work synergistically: The DPO extracts cyclical information from price action, the normalization process standardizes this information for consistent interpretation, and the threshold system provides actionable decision points based on historical extremes.
Operational Mechanism
The indicator calculates a detrended price value by comparing current price against a displaced moving average. This detrended value is then normalized against its historical range over a specified lookback period, transforming it into a percentage-based oscillator. A smoothing filter is applied to reduce noise and highlight significant movements.
The oscillator's movement through threshold zones generates four distinct market signals:
Entry into overbought territory (crossing above 95%)
Exit from overbought territory (crossing below 95%)
Entry into oversold territory (crossing below 5%)
Exit from oversold territory (crossing above 5%)
Each signal corresponds to a specific market condition hypothesis regarding institutional versus retail trader dynamics in major market cycles.
Practical Application Guidelines
Primary Use Cases:
Identification of potential major cycle turning points on weekly and monthly timeframes
Confirmation tool for existing trading strategies requiring cycle analysis
Risk management through recognition of extreme market conditions
Interpretation Framework:
Overbought Conditions (Oscillator ≥ 95%): Suggest potential selling pressure from major market participants. Consider reducing long exposure or implementing protective measures.
Oversold Conditions (Oscillator ≤ 5%): Indicate potential accumulation zones by institutional buyers. Consider establishing or adding to long positions using dollar-cost averaging strategies.
Threshold Crossings: Monitor for exits from extreme zones as potential confirmation that a cycle peak or trough may have formed.
Parameter Considerations:
Default parameters (548-period oscillator, 274-period offset, 1096-period lookback) are optimized for identifying major market cycles. Users may adjust these values for different market conditions or timeframes, though significant parameter changes will alter the indicator's sensitivity and signal frequency.
Originality and Distinctive Features
This implementation incorporates several innovative aspects:
Extended Cycle Focus: Unlike most oscillators designed for shorter timeframes, this tool employs exceptionally long calculation periods specifically for identifying primary market cycles.
Dynamic Normalization: The lookback-based normalization adapts to changing market conditions without requiring manual recalibration.
Multi-Signal Alert System: Four distinct alert conditions provide nuanced information about market state transitions rather than simple binary signals.
Integrated Risk Context: Each signal includes contextual information about potential market participant behavior, encouraging disciplined risk management.
Empirical Considerations and Limitations
The indicator provides probabilistic assessments based on historical price behavior, not predictive certainties. Market conditions may change, rendering historical patterns less reliable. Users should consider:
The indicator performs best in trending or cyclical markets; it may generate false signals during extended range-bound periods.
No technical indicator, including this one, can guarantee future market movements.
Proper position sizing and risk management should accompany all trading decisions, regardless of indicator signals.
Expected User Outcomes
When used as part of a comprehensive trading plan, this indicator can help users:
Identify potential reversal zones in major market cycles
Develop patience by focusing on significant rather than frequent trading opportunities
Maintain objective perspective during market extremes through quantitative assessment
Coordinate entry and exit timing with cycle analysis
The Trend Price Oscillator Pulse Edition represents a specialized tool for traders seeking to align their strategies with major market cycles through systematic analysis of price oscillation behavior relative to long-term trends.
Fusion Signals Pro [Apicode]# Fusion Signals Pro
**Technical Documentation**
## 1. Overview
**Fusion Signals Pro** is a multi-indicator, multi-timeframe confirmation system developed in **Pine Script v6**.
Its primary goal is to **identify high-probability long and short entries** by requiring alignment across several momentum, trend, and oscillator indicators.
The indicator combines:
* Momentum (RPM, MACD)
* Oscillators (RSI, Stochastic, CCI, BBO)
* Trend-following logic (SuperTrend, EMA + T3 smoothing)
* A proprietary Heiken-Ashi–based trend module (**HACOLT**)
When all components align, the system generates **entry signals**, visual confirmations, and alerts.
---
## 2. Indicator Characteristics
| Property | Value |
| ------------------ | ----------------------------- |
| Script Version | Pine Script™ v6 |
| Overlay | Yes (candles, EMAs, signals) |
| Main Panel | Oscillator-style status panel |
| Repainting Control | Configurable per indicator |
| Market Types | Crypto, Stocks, ETFs |
| Timeframes | 15m, 30m, 1H, 2H and higher |
---
## 3. Architecture Summary
The indicator consists of **five major modules**:
1. **Multi-Timeframe Data Engine**
2. **Indicator Calculation Engine**
3. **Scoring & State Engine**
4. **Signal & Alert Engine**
5. **Trendline & HACOLT Engine**
---
## 4. Multi-Timeframe Data Engine
### `getSecurityData()`
This function safely retrieves higher- or alternate-timeframe data while controlling repainting behavior.
**Key features:**
* Supports real-time vs historical bar handling
* Optional repainting toggle per indicator
* Uses `request.security()` internally
```pinescript
getSecurityData(src, resolution, allowRepainting)
```
---
## 5. Indicator Components
### 5.1 RPM (Rate of Price Momentum)
**Purpose:**
Measures cumulative percentage price change over a defined period.
**Logic:**
* Calculates bar-to-bar % change
* Sums the change over `RPM Period`
**Signal Logic:**
* `> 0` → Bullish
* `< 0` → Bearish
---
### 5.2 BBO (Bull–Bear Oscillator)
**Custom oscillator combining:**
* Candle price structure
* RSI confirmation
* Super Smoother filter
**Output values:**
* `+100` → Bullish impulse
* `-100` → Bearish impulse
* `0` → Neutral
Smoothed using a **Super Smoother Moving Average**.
---
### 5.3 MACD
**Configurable elements:**
* Fast EMA
* Slow EMA
* Signal line
* Histogram or MACD line selection
**Signal Logic:**
* Positive value → Bullish
* Negative value → Bearish
Supports independent timeframe and repainting control.
---
### 5.4 RSI (Relative Strength Index)
**Standard RSI logic (14-period default)**
**Signal Threshold:**
* `> 50` → Bullish
* `< 50` → Bearish
---
### 5.5 Stochastic Oscillator
**Calculation:**
* %K → smoothed by SMA
* Uses configurable smoothing parameters
**Signal Threshold:**
* `> 50` → Bullish
* `< 50` → Bearish
---
### 5.6 CCI (Commodity Channel Index)
**Signal Logic:**
* `> 0` → Bullish
* `< 0` → Bearish
---
### 5.7 SuperTrend
**Parameters:**
* ATR Period
* Multiplier Factor
**Trend Logic:**
* Price above SuperTrend → Bullish
* Price below SuperTrend → Bearish
---
## 6. Visual Status Panel (Fusion Matrix)
Each indicator is plotted as a **horizontal square block**, color-coded:
* **Green** → Bullish
* **Red** → Bearish
### Indicator Order (Top to Bottom):
1. RPM
2. MACD
3. RSI
4. Stochastic
5. CCI
6. BBO
7. SuperTrend
8. HACOLT
Labels dynamically update on the last bar.
---
## 7. Scoring System
Each indicator contributes **1 point** when bullish.
| Indicator | Condition |
| ---------- | ----------- |
| RPM | `> 0` |
| MACD | `> 0` |
| RSI | `> 50` |
| Stochastic | `> 50` |
| CCI | `> 0` |
| BBO | `> 0` |
| SuperTrend | Price above |
**Score Range:** `0 → 7`
### Color Mapping
* **7** → Strong Green (Full alignment)
* **5–6** → Light Green
* **4** → Neutral (Gray)
* **1–3** → Light Red
* **0** → Strong Red
This score controls:
* Candle color
* Bar color
* Visual confidence level
---
## 8. Entry Logic
### Long Entry
All bullish conditions must be met:
```text
RPM > 0
MACD > 0
RSI > 50
Stochastic > 50
CCI > 0
BBO > 0
SuperTrend bullish
```
### Short Entry
All bearish conditions must be met (inverse logic).
---
## 9. Position State Machine
The indicator tracks trade direction using an internal state:
| State | Meaning |
| ----- | ---------- |
| `1` | Long bias |
| `-1` | Short bias |
| `0` | Neutral |
**Signals trigger only on state transitions**, reducing false signals and repeated entries.
---
## 10. Alerts
### Available Alerts
* Long Entry
* Short Entry
* Generic Entry (Long or Short)
* HACOLT Trend Change
Alerts include:
* Symbol
* Price
* Direction
---
## 11. Trendline Engine (EMA + T3)
### Features:
* Multi-timeframe EMA calculation
* T3 smoothing for noise reduction
* Auto / Multiplier / Manual timeframe selection
### Logic:
* EMA1 (fast) vs EMA2 (slow)
* Filled area changes color on crossover
* Acts as a **trend bias filter**
---
## 12. HACOLT Module (Advanced Trend Filter)
**HACOLT** is a proprietary trend detection system based on:
* Heiken-Ashi logic
* TEMA smoothing
* Candle structure analysis
* State persistence logic
### States:
* `1` → Bullish trend
* `-1` → Bearish trend
### Uses:
* Additional confirmation
* Early trend detection
* Visual trend persistence
---
## 13. Repainting Control
Each major component includes:
* Independent timeframe
* Independent repainting toggle
This allows:
* Backtesting accuracy
* Real-time responsiveness
* Hybrid confirmation setups
---
## 14. Intended Use
**Fusion Signals Pro is designed for:**
* Trend-following strategies
* Confirmation-based entries
* Multi-timeframe analysis
* Crypto and equity markets
⚠️ It is **not** intended as a standalone trading system without risk management.
---
## 15. Conclusion
Fusion Signals Pro is a **high-confluence trading indicator** that merges momentum, oscillators, and trend-following logic into a unified decision framework.
Its strength lies in **signal alignment**, **state tracking**, and **visual clarity**, making it suitable for both discretionary and systematic traders.
Gap Hunter Pro [Auto-Alerts + Fill Detection]Gap trading is profitable, but staring at charts waiting for a fill is tedious.
Gap Hunter Pro automates the process by instantly detecting valid gaps, drawing dynamic support/resistance zones, and alerting you exactly when action happens. Unlike standard gap indicators, this script manages the lifecycle of the gap—tracking it from creation to partial entry, and finally removing it once it is fully filled.
Key Features:
🚀 Smart Detection: Automatically finds "Gap Ups" and "Gap Downs" based on your custom threshold (filter out small noise).
🔔 Dual Alerts:
Entry Alert: Get notified the moment price touches the gap zone.
Fill Alert: Get a second notification when the gap is 100% closed (filled).
🧹 Auto-Cleanup: Zones automatically delete themselves from the chart once filled, keeping your workspace clean.
🎨 Fully Customizable: Control colors, border thickness, history depth, and text labels.
How to Use:
Add to Chart: Works on any timeframe (15m recommended for Day Trading, Daily for Swing).
Adjust Settings: Set "Max Gaps to Keep" to control history depth.
Set the Alert (Crucial):
Click the Alert button in TradingView.
Condition: Select Gap Hunter Pro.
Action: Select "Any alert() function call".
You now have a fully automated gap scanner running 24/7.
ORB 369 - Opening Range Breakout The ORB 369 is a professional-grade momentum indicator designed to capture the volatility of the New York market open. While many Opening Range Breakout (ORB) scripts simply draw lines, this script integrates time-segmented price action with Supply and Demand (S/D) theory to filter out "fakeouts" and identify high-probability institutional entries.
💡 The Core Concept: Why 3-6-9?
The strategy is rooted in the "Market Open Volatility" principle. The first 15 minutes (9:30–9:45 AM EST) represent the period where institutional orders are processed and "price discovery" is most aggressive.
The Range: We define the 15-minute high and low as the "Battlefield."
The 369 Logic: This script focuses on the 3rd 5-minute candle of the session (completing the 15m range) and monitors the subsequent 5m and 15m cycles for a definitive trend shift.
🛠️ How It Works
The script utilizes Pine Script v6 high-precision time-tracking and state-handling to ensure accuracy even on historical data.
1. Dynamic Session Anchoring
Unlike static indicators, this script uses America/New_York timezone anchoring. It identifies the Opening Range (OR) regardless of your local time, ensuring you are aligned with the NYSE floor traders.
2. Supply & Demand Detection
The script doesn't just look at the high/low; it analyzes the micro-structure within that 15-minute window.
It identifies unmitigated zones (areas where price moved so fast it left "imbalances").
If a breakout occurs but price immediately hits an internal S/D zone, it warns the trader of a potential "Look Above and Fail" scenario.
3. Breakout Confirmation (5m Logic)
A common mistake is entering on a "wick." This script uses Closing Logic:
Bullish Signal: A 5-minute candle must close entirely above the 15m High.
Bearish Signal: A 5-minute candle must close entirely below the 15m Low.
The script then repaints the candle body (defaulting to Blue/Red) to provide an instant visual cue that the "Breakout is Confirmed."
📈 How to Use It
Wait for the Box: At 9:45 AM EST, the script will automatically lock in the High, Low, and Midpoint (Mean) of the range.
Monitor the Midpoint: The Midpoint acts as the "Line in the Sand." If a breakout occurs but price stays near the Midpoint, the trend is weak. If price stays in the upper half of the range, the Bullish bias is stronger.
The Entry: Wait for the Candle Color Change. A blue candle above the range suggests a long entry; a red candle below suggests a short.
Supply/Demand Zones: If the script highlights a "Demand Zone" at the bottom of the range and price bounces off it before breaking the top, this provides a "double-confluence" setup.
⚙️ Technical Features
Customizable Aesthetics: Use the Settings menu to change the breakout colors (Green/Blue/Red) to match your personal chart theme.
Smart Tooltips: Hover over the inputs in the settings to see detailed explanations of what each parameter does.
Alert Ready: Built-in alerts for "Bullish Breakout" and "Bearish Breakout" that can be sent directly to your phone or desktop via TradingView.
Markov 4-Bar with Option suggestion Markov 4 Bar Probability Study — Smarter Pattern Forecasting
The Markov 4 Bar Probability Study gives traders a data driven edge by analyzing the most recent four candles and comparing them to hundreds of historical matches. Instead of guessing what comes next, the study shows how similar patterns behaved in the past—revealing the probability of an up move, down move, average return, and how often the next bar produced a strong push.
A customizable Strong Threshold (%) lets you define what counts as a “strong” move. Lower values capture subtle momentum shifts, while higher values isolate only the most meaningful expansions, and this same strength read is used to suggest a directional options spread (for example, favoring a bullish credit spread when the pattern shows a strong upside edge, or a bearish one when downside odds dominate).
This tool is fast, visual, and built for real time decision making. If you want a clean statistical read on what usually follows your current 4 bar pattern—plus a suggested options spread aligned with that edge—this study delivers it with clarity and precision.
EMA Touch & Price Action (Perfect Match)Indicator Name: EMA Touch & Price Action (Perfect Match)
【Overview】
This indicator is designed for traders who rely on precision and clarity. It automatically detects touches on up to four Exponential Moving Averages (EMAs) and identifies high-probability reversal patterns: the Engulfing (Outside Bar) and the Pin Bar.
The core strength of this script is the "Perfect Match" logic. Unlike many other tools that suffer from signal lag or "repainting" (where signals appear or disappear after the bar closes), this indicator ensures that the signals align perfectly with the price action on the chart. By focusing on confirmed price data, it provides a reliable foundation for real-time decision-making.
【Key Features】
Quad-EMA Touch Detection:
Displays four customizable EMAs (Default: 10, 20, 40, 80).
When a candle's wick or body touches an EMA, a color-coded dot (●) appears below/above the bar, instantly showing which level is being tested.
Advanced Engulfing Logic ("包"):
Goes beyond simple size comparison. It requires a color reversal (e.g., a green bar following a red bar) and a breakout of the previous candle’s high/low to confirm strong momentum shift.
Refined Pin Bar Detection ("Pin"):
Filters out "fake" pins by calculating the ratio between the wick and the body. You can adjust the sensitivity (Wick Ratio) in the settings to match your specific market (Forex, Crypto, or Stocks).
Zero-Offset, Confirmed Signals:
Signals are displayed directly on the current bar. By using the "Once Per Bar Close" alert setting, you ensure that you only trade on fully completed price action patterns.
【Settings (Parameters)】
EMA 1–4 Length: Customize the periods for your moving averages.
Pin Bar Wick Ratio: Adjust how long the wick must be relative to the body (Default is 2.0x).
【How to Trade】
Trend Following (Pullbacks): The highest win rates occur when the market is trending. Look for a "Combo" where price pulls back to a medium-to-long-term EMA (EMA 20 or 40), touches it, and prints an Engulfing or Pin Bar signal in the direction of the trend.
Confluence: When multiple EMA dots appear on the same bar as a "包" or "Pin" label, it indicates a significant zone of support or resistance.
Top % Up Scanner (2m/5m/15m/30m)TradeSage
Top % Up Scanner (Multi-Timeframe Momentum Detector)
Overview
A real-time scanner that identifies stocks with the strongest 2-minute price movement, backed by high volume. Perfect for day traders and scalpers looking to catch explosive intraday moves.
Key Features
📊 Multi-Timeframe Display
Shows % gains across 2m, 5m, 15m, and 30m periods
Quick snapshot of momentum across different timeframes
🔍 Smart Filters
Price Range: Scans only $0.10 - $20 stocks (customizable)
High Volume: Requires 3x+ average volume confirmation
Top Mover: Highlights when 2m gain is the highest in lookback period
🎯 Visual Alerts
Green triangle below breakout bars
Green background highlight
Auto-generated label showing all timeframe %s
Built-in alert for notifications
Best For
Day trading momentum breakouts
Scalping explosive moves
Multi-chart scanning for hottest movers
Early detection before moves become obvious
Recommended Setup
Timeframe: 1-2 minute charts
Use with: Support/resistance levels and proper risk management
Customize: Adjust price range, volume threshold, and lookback period to match your style
Sweep HybridVersion B (Full / TradingView Style)
Sweep → BOS Hybrid (XAUUSD) | 2-Leg Plan + BE Runner + Persistent TP Tags
This indicator is built for traders who combine liquidity sweep concepts with structure confirmation.
Logic
Detects sweeps of recent pivot highs/lows (wick/close option).
Arms a setup and waits for a confirmed BOS (1-bar or 2-bar confirmation).
On BOS confirmation, it draws a full trade framework:
Entry (BOS level or confirm-close option)
Stop Loss (with tick buffer)
TP1 / TP2 using R-multiples
Dotted projection lines + optional Risk/Reward boxes
Risk & Position Sizing (XAUUSD)
Designed for XAUUSD with a simple money model (editable).
Uses Capital ($) + Risk per leg ($ or %) to calculate Qty for Leg 1 and Leg 2
Qty is rounded down to your preferred step size (lot step).
Trade Management
When TP1 is hit, the SL is moved to Break-Even (Entry) for the remaining leg (runner).
TP tags are persistent and printed at the exact level:
TP1 tag on TP1 hit
TP2 tag on TP2 hit
SL tag if stop is hit before TP1
BE tag if SL is hit after TP1 (since SL moved to Entry)
Visuals
Dotted structural link lines:
Pivot → Sweep
Pivot → BOS
BOS Touch line
BOS lines use a separate color from Sweep/Touch lines for clarity.
Alerts
Alert conditions when price touches BOS (wick-touch or close-confirm).
EMA20 and 10 PullbackStrategy Logic
Uses EMA 10, EMA 20, and VWAP for trend filtering
Identifies strong bullish and bearish trends
Waits for controlled pullbacks (1–3 candles) near EMA20
Triggers entries only on engulfing confirmation candles
Generates BUY signals in uptrends and SELL signals in downtrends
Key Features
Works best on NIFTY and liquid stocks
Avoids sideways markets by using EMA alignment + VWAP
Non-repainting, rule-based logic
Suitable for manual trading or alert-based automation
Alerts compatible with webhooks (n8n / Google Sheets)
Recommended Usage
Timeframe: 5-minute
Market: Trending sessions
Stop-loss: Below EMA20 or engulfing candle
Target: 1:1.5 – 1:2 R:R or EMA10 trailing
Morgpy Risk BoxThe Morppy Risk Box is an intraday breakout strategy based on constructing a price box defined between 5:00 AM and 9:30 AM. During this interval, the highest and lowest prices reached by the asset are recorded, forming a reference range.
Once the box period ends, the strategy waits for the first candlestick that breaks and closes outside these limits. This breakout is interpreted as an entry signal:
- Buy (long): if the first candlestick closes above the box's high.
- Sell (short): if the first candlestick closes below the box's low.
The logic includes a filter that ensures only one trade is executed per day, preventing multiple entries in the same direction.
