Single_Timeframe_3EMA + Current_Timeframe_3SMMAPlots 3 EMA from a larger timeframe (day, week) and 3 SMMA from the current one.
Timeframe
Single Timeframe 3EMA + Current Timeframe 3SMMA
Plots 3 exponential moving averages from a bigger timeframe (Day, Week) and 3 smoothed moving averages from the current timeframe.
C320up MPC EMA 5 by Chart ResolutionC320up "MPC" EMA 5 by Chart Resolution
- This is a custom version of our C320up EMA by Chart Resolution.
This version has 5 EMA’s and is easier to quickly switch chart resolutions, this time using only 2 chart periods.
Why have filtered chart resolutions?
Some EMA’s don’t tend to give a useful indication at a given chart resolution, so any resolution not selected will not have the EMA lines appear on the screen.
Default resolutions are “240” Minutes (4 Hour), and “D” (1 Day).
With these settings the EMA lines will only appear on the 4 Hour and Daily charts.
Default EMA’s are 20, 50, 100, 200, and 1200.
Why 1200 you may ask. 1200 on the 4 Hour chart is equivalent to 200 on the Daily chart.
You can change these inputs to suit your requirements.
The first input is used to manually type in the chart resolution, as the TV built in drop downs don’t have all of the chart resolutions, 240 Minutes (4 Hour) for example.
If you don’t want them all to show on the screen, you can un-check them in the Style tab in settings.
Check out our scripts page for more indicators. (Including our Bear Power Indicator)
Any questions, just leave a comment.
If you want more control over the chart resolutions, try using this one:
"C320up EMA by Chart Resolution"
C320up EMA by Chart ResolutionC320up EMA by Chart Resolution
- You may only want your EMA’s to appear on specific chart resolutions.
Use this indicator to select up to four resolutions and four EMA’s.
Sometimes a certain EMA (Exponential Moving Average) doesn’t give a good indication on a smaller time frame or vice versa, so you can customise these to suit.
Default settings are “240” Minutes for all EMA’s to appear.
Default EMA’s are 20, 50, 100, and 200.
To change the resolution, type in one of these examples:
15 = 15 Minutes, 60 = 1 Hour, 240 = 4 Hours, D = Day, W = Week, M = Month, 2M = 2 Months, etc.
You could have just the one EMA appear on multiple time frames, or have 2 appear on 2 time frames, etc.
Check out our scripts page for more indicators.
Any questions, just leave a comment.
Simpler Trading MTF Trend 2018Any experienced trader knows that you can never get the whole ‘picture’ by looking at just one time frame. That is why we’ve created the Multi Time Frame Trend Analysis Indicator. With a glance at a single chart, you can determine across multiple timeframes the overall trend.
www.simplertrading.com
NeoButane Bitfinex BTC Longs vs. Shorts Tickers Simplified (MtF)With optional overlay for high/low candle values and daily resolution close. Now with MtF to add customization .
Made because I'm too lazy to constantly re-add tickers and to reduce noise.
Multi-Time MAThis indicator plots the chosen EMA length (def 100) and the SMA length (def 200) on each of the chosen time frames (def 1hr, 3hr, and Daily)
C320up Strategy Tester Start TimeC320up Strategy Tester Start Time
This is a little snippet you can paste into your Strategy to set the testing start date and time.
It is not a Strategy per se, though is an example with the timestamp script included.
Instructions are fairly straight forward, and are listed in the script.
If for some reason you also wanted an end date, that too is possible. Just leave a note in the comments.
Disclaimer: We searched for a similar script on TV, and could not find anything at this point in time.
You can set your preferred date and time in the input section of the settings.
Enjoy!
Candle FMTFMultitimeframe candlesticks with shadows. Script draws each next candle gradually. Sorry for bad english. Good Luck in tradework!
TSP Cycles DoubleDouble Cycles
You can setup higher timeframe cycle period's as argument, default is M30
Cuyle's Multi-IndicatorsI have combine multiple indicators into the same indicator to allow the addition of more indicators on your chart if you are currently using the free subscription which limits your indicators
It contains 3 EMAs, Bollinger Bands, and a Greater Timer Frame High/Low
Triple 3 EMA ConvergenceThis indicator was made specifically to trigger alerts when multiple EMA lines are converging on multiple time frames.
You change which 3 time frames it looks at (Default 1h, 3h, D) and 3 EMA lengths (Default 8,21,100).
You can also change the threshold in which the convergence is triggered (How tight the convergence must be to trigger (Default 1))
It uses ATR as a filter on each of the time frames with the ATR length set to the FastEMA length setting
If the Daily chart only (Or largest Resolution) is converging, you will see a red column with the value of 100.
If 2 of 3 resolutions are converging, you will see a yellow column with the value of 200.
If all 3 resolutions are converging, you will see a green column with the value of 300.
With this in mind you can set alerts when the value is above any or all of these levels.
Please contact me if you need any further explanation or have suggestions.
Donations are not required but are always welcomed and much appreciated.
LTC - MGgHzsHsQRkLYrDwpQqowHuWNgaYUhMQcZ
BTC -0.30% - 34AoewZtXPW2cj3wqw9Bs5GE6ibUJpjQRv
ETH - 0xCf665150B9b0F65952A201e035aa6BA681016490
Happy Trading Yall. Keep Calm and HODL Litecoin
Always show daily EMAThis script will always plot the daily EMA regardless of which timeframe you are on.
Volume Weighted Average Range Bands [DW]This is an experimental study designed to identify the underlying trend bias and volatility of an instrument over any custom interval TradingView supports.
First, reset points are established at points where the opening price of the interval changes.
Next, Volume Weighted Average Price (VWAP) is calculated. It is the cumulative sum of typical price times volume divided by the cumulative volume. The cumulation starts over upon each reset point.
After that, Volume Weighted Average Range (VWAR) is calculated. The formula structure is the same as VWAP, except using range rather than typical price.
Lastly, the bands are calculated by multiplying the VWAR by the specified multiplier (approximate Golden Ratio by default) and by 1 through 5, then adding to and subtracting from the VWAP.
Custom Bar Colors are included.
Multi-Bollinger [DW]This is an experimental study designed to visualize trend activity and volatility using a set of two Bollinger Bands calculated with a basis moving average type of your choice.
The available moving averages in this script are:
-Exponential Moving Average
-Simple Moving Average
-Weighted Moving Average
-Volume Weighted Moving Average
-Hull Moving Average
-Least Squares Moving Average
-Arnaud Legoux Moving Average
-Coefficient of Variation Weighted Moving Average
-Fractal Adaptive Moving Average
-Kaufman's Adaptive Moving Average
In addition, a middle filter is calculated by taking the median of the two basis lines.
Multi-Timeframe functionality is included. You can choose any timeframe that Tradingview supports as the basis resolution for the bands.
Custom bar color scheme is included with four options to choose from.
TS avg/ema 2 timeframeChart alerts of Cross between Average price and EMA on 2 timeframe
First timeframe comes from period
Second timeframe comes from input (default 1hour)
Laguerre Multi-Filter [DW]This is an experimental study designed to identify underlying price activity using a series of Laguerre Filters.
Two different modes are included within this script:
-Ribbon Mode - A ribbon of 18 Laguerre Filters with separate Gamma values is calculated.
-Band Mode - An average of the 18 filters generates the basis line. Then, Golden Mean ATR over the specified sampling period multiplied by 1 and 2 are added and subtracted to the basis line to generate the bands.
Multi-Timeframe functionality is included. You can choose any timeframe that TradingView supports as the basis resolution for the script.
Custom bar colors are included. Bar colors are based on the direction of any of the 18 filters, or the average filter's direction in Ribbon Mode. In Band Mode, the colors are based solely on the average filter's direction.
SuperTrend MultiTimeFrame with Alerts V.1SuperTrend Multi Time Frame with Multi Alerts ... you can insert alerts for all supertrend viewed on graph.
Different alerts for long and short.
This script plot 5min, 1H and 1D!
Enjoy!
MTF Polarity Grid [DW]This is an experimental study designed to track directional polarities across multiple timeframes and express them as a simple two color grid.
The polarity in this calculation is determined by divergence between a fast and slow McGinley Dynamic.
Your current resolution's polarity is the top row, the rows below are are for higher timeframes of your choice.
MTF Donchian Quadrants [DW]This is a simple Donchian Channel variation that separates the the channels into quadrants, and enables MTF calculation.
Average open and close plots are included for additional confirmation of a trend.
Hawkeye RoadkillWait for the Roadkill signal – then dive for the perfect kill!
Hawkeye Roadkill looks at multiple timeframes simultaneously, and then provides two entry signals, one based on the trend and the other on volume.
One of the biggest problems traders face is that whenever they see a signal or set up in one timeframe, they immediately look at a lower or higher timeframe chart to validate the signal for the confidence to enter the trade. This is a classic problem, and one that can be seen on virtually every trader’s screen, which can be cluttered with several charts, all with different timeframes and all giving different signals to the confused trader. Ultimately, the trader loses both money and confidence, and is no longer able to trade.
For example, if you are looking at a daily chart, does the weekly chart also suggest that your trade is valid? Or, if you are looking at a 15 minute timeframe, does the one-hour chart confirm your analysis? Often the two charts will differ in their signals, since a trend that has begun in one timeframe, may already be ending in another.
So you have two clear signals to get you into the market in your preferred timeframe.
Trading Session IndicatorThis indicator is basically just a back-testing tool. All it does is highlight the background of your charts with the specified color within the specified timezone.
This is useful particularly for back-testing purposes, such as testing a day-trading strategy within a particular period of the day or ignoring signals that fall within the given timeframe (which is useful for ignoring setups during your testing that appear while you're asleep or at work etc.)
Take it easy :)
- Matt.
Multiple Ichimoku CloudsFor anyone that uses the Ichimoku Cloud there is a consistent need to flip between timeframes to get information about this at all levels. However, that trouble is now over. In this script there are 4 Ichimoku Clouds that operate in 4 different time frames. To change the timeframe simply change the multiplication factor to the desired levels. How this script works is that it takes your current timeframe as an input then it applies multiplication factors to it to achieve larger timescales. In the example here we are looking at the XBTJPY pair on the 1 hour. Our first cloud is 1x scaling, meaning that it is the 1 hour cloud. The second and third are 2x and 4x respectively meaning that we are looking at the 2 hour cloud and the 4 hour cloud. Lastly the largest cloud is the 24x cloud, aka the daily cloud. Now you only really need one look at the clouds for all the essential information.
As always feel free to message me about anything regarding this script.
Be happy :)
