Auf geht's

Quarterly

Quarterly Theory ICT 02 [TradingFinder] True Open Session 90 Min🔵 Introduction The Quarterly Theory ICT indicator is an advanced analytical system built on ICT (Inner Circle Trader) concepts and fractal time. It divides time into four quarters (Q1, Q2, Q3, Q4), and is designed based on the consistent repetition of these phases across all trading timeframes (annual, monthly, weekly, daily, and even shorter trading sessions). Each cycle consists of four distinct phases: the first phase (Q1) is the Accumulation phase, characterized by price consolidation; the second phase (Q2), known as Manipulation or Judas Swing, is marked by initial false movements indicating a potential shift; the third phase (Q3) is Distribution, where price volatility peaks; and the fourth phase (Q4) is Continuation/Reversal, determining whether the previous trend continues or reverses. 🔵 How to Use The central concept of this strategy is the "True Open," which refers to the actual starting point of each time cycle. The True Open is typically defined at the beginning of the second phase (Q2) of each cycle. Prices trading above or below the True Open serve as a benchmark for predicting the market's potential direction and guiding trading decisions. The practical application of the Quarterly Theory strategy relies on accurately identifying True Open points across various timeframes. True Open points are defined as follows : Yearly Cycle : Q1: January, February, March Q2: April, May, June (True Open: April Monthly Open) Q3: July, August, September Q4: October, November, December Monthly Cycle : Q1: First Monday of the month Q2: Second Monday of the month (True Open: Daily Candle Open price on the second Monday) Q3: Third Monday of the month Q4: Fourth Monday of the month Weekly Cycle : Q1: Monday Q2: Tuesday (True Open: Daily Candle Open Price on Tuesday) Q3: Wednesday Q4: Thursday Daily Cycle : Q1: 18:00 - 00:00 (Asian session) Q2: 00:00 - 06:00 (True Open: Start of London Session) Q3: 06:00 - 12:00 (NY AM) Q4: 12:00 - 18:00 (NY PM) 90 Min Asian Session : Q1: 18:00 - 19:30 Q2: 19:30 - 21:00 (True Open at 19:30) Q3: 21:00 - 22:30 Q4: 22:30 - 00:00 90 Min London Session : Q1: 00:00 - 01:30 Q2: 01:30 - 03:00 (True Open at 01:30) Q3: 03:00 - 04:30 Q4: 04:30 - 06:00 90 Min New York AM Session : Q1: 06:00 - 07:30 Q2: 07:30 - 09:00 (True Open at 07:30) Q3: 09:00 - 10:30 Q4: 10:30 - 12:00 90 Min New York PM Session : Q1: 12:00 - 13:30 Q2: 13:30 - 15:00 (True Open at 13:30) Q3: 15:00 - 16:30 Q4: 16:30 - 18:00 Micro Cycle (22.5-Minute Quarters) : Each 90-minute quarter is further divided into four 22.5-minute sub-segments (Micro Sessions). True Opens in these sessions are defined as follows : Asian Micro Session : True Session Open : 19:30 - 19:52:30 London Micro Session : T rue Session Open : 01:30 - 01:52:30 New York AM Micro Session : True Session Open : 07:30 - 07:52:30 New York PM Micro Session : True Session Open : 13:30 - 13:52:30 By accurately identifying these True Open points across various timeframes, traders can effectively forecast the market direction, analyze price movements in detail, and optimize their trading positions. Prices trading above or below these key levels serve as critical benchmarks for determining market direction and making informed trading decisions. 🔵 Setting Show True Range : Enable or disable the display of the True Range on the chart, including the option to customize the color. Extend True Range Line : Choose how to extend the True Range line on the chart, with the following options: None: No line extension Right: Extend the line to the right Left: Extend the line to the left Both: Extend the line in both directions (left and right) Show Table : Determines whether the table—which summarizes the phases (Q1 to Q4)—is displayed. Show More Info : Adds additional details to the table, such as the name of the phase (Accumulation, Manipulation, Distribution, or Continuation/Reversal) or further specifics about each cycle. 🔵 Conclusion The Quarterly Theory ICT, by dividing time into four distinct quarters (Q1, Q2, Q3, and Q4) and emphasizing the concept of the True Open, provides a structured and repeatable framework for analyzing price action across multiple time frames. The consistent repetition of phases—Accumulation, Manipulation (Judas Swing), Distribution, and Continuation/Reversal—allows traders to effectively identify recurring price patterns and critical market turning points. Utilizing the True Open as a benchmark, traders can more accurately determine potential directional bias, optimize trade entries and exits, and manage risk effectively. By incorporating principles of ICT (Inner Circle Trader) and fractal time, this strategy enhances market forecasting accuracy across annual, monthly, weekly, daily, and shorter trading sessions. This systematic approach helps traders gain deeper insight into market structure and confidently execute informed trading decisions.
Pine Script™ Indikator
von TFlab
Quarterly Theory ICT 01 [TradingFinder] XAMD + Q1-Q4 Sessions🔵 Introduction The Quarterly Theory ICT indicator is an advanced analytical system based on the concepts of ICT (Inner Circle Trader) and fractal time. It divides time into quarterly periods and accurately determines entry and exit points for trades by using the True Open as the starting point of each cycle. This system is applicable across various time frames including annual, monthly, weekly, daily, and even 90-minute sessions. Time is divided into four quarters: in the first quarter (Q1), which is dedicated to the Accumulation phase, the market is in a consolidation state, laying the groundwork for a new trend; in the second quarter (Q2), allocated to the Manipulation phase (also known as Judas Swing), sudden price changes and false moves occur, marking the true starting point of a trend change; the third quarter (Q3) is dedicated to the Distribution phase, during which prices are broadly distributed and price volatility peaks; and the fourth quarter (Q4), corresponding to the Continuation/Reversal phase, either continues or reverses the previous trend. By leveraging smart algorithms and technical analysis, this system identifies optimal price patterns and trading positions through the precise detection of stop-run and liquidity zones. With the division of time into Q1 through Q4 and by incorporating key terms such as Quarterly Theory ICT, True Open, Accumulation, Manipulation (Judas Swing), Distribution, Continuation/Reversal, ICT, fractal time, smart algorithms, technical analysis, price patterns, trading positions, stop-run, and liquidity, this system enables traders to identify market trends and make informed trading decisions using real data and precise analysis. ♦ Important Note : This indicator and the "Quarterly Theory ICT" concept have been developed based on material published in primary sources, notably the articles on Daye( traderdaye ) and Joshuuu . All copyright rights are reserved. 🔵 How to Use The Quarterly Theory ICT strategy is built on dividing time into four distinct periods across various time frames such as annual, monthly, weekly, daily, and even 90-minute sessions. In this approach, time is segmented into four quarters, during which the phases of Accumulation, Manipulation (Judas Swing), Distribution, and Continuation/Reversal appear in a systematic and recurring manner. The first segment (Q1) functions as the Accumulation phase, where the market consolidates and lays the foundation for future movement; the second segment (Q2) represents the Manipulation phase, during which prices experience sudden initial changes, and with the aid of the True Open concept, the real starting point of the market’s movement is determined; in the third segment (Q3), the Distribution phase takes place, where prices are widely dispersed and price volatility reaches its peak; and finally, the fourth segment (Q4) is recognized as the Continuation/Reversal phase, in which the previous trend either continues or reverses. This strategy, by harnessing the concepts of fractal time and smart algorithms, enables precise analysis of price patterns across multiple time frames and, through the identification of key points such as stop-run and liquidity zones, assists traders in optimizing their trading positions. Utilizing real market data and dividing time into Q1 through Q4 allows for a comprehensive and multi-level technical analysis in which optimal entry and exit points are identified by comparing prices to the True Open. Thus, by focusing on keywords like Quarterly Theory ICT, True Open, Accumulation, Manipulation, Distribution, Continuation/Reversal, ICT, fractal time, smart algorithms, technical analysis, price patterns, trading positions, stop-run, and liquidity, the Quarterly Theory ICT strategy acts as a coherent framework for predicting market trends and developing trading strategies. 🔵b]Settings Cycle Display Mode: Determines whether the cycle is displayed on the chart or on the indicator panel. Show Cycle: Enables or disables the display of the ranges corresponding to each quarter within the micro cycles (e.g., Q1/1, Q1/2, Q1/3, Q1/4, etc.). Show Cycle Label: Toggles the display of textual labels for identifying the micro cycle phases (for example, Q1/1 or Q2/2). Table Display Mode: Enables or disables the ability to display cycle information in a tabular format. Show Table: Determines whether the table—which summarizes the phases (Q1 to Q4)—is displayed. Show More Info: Adds additional details to the table, such as the name of the phase (Accumulation, Manipulation, Distribution, or Continuation/Reversal) or further specifics about each cycle. 🔵 Conclusion Quarterly Theory ICT provides a fractal and recurring approach to analyzing price behavior by dividing time into four quarters (Q1, Q2, Q3, and Q4) and defining the True Open at the beginning of the second phase. The Accumulation, Manipulation (Judas Swing), Distribution, and Continuation/Reversal phases repeat in each cycle, allowing traders to identify price patterns with greater precision across annual, monthly, weekly, daily, and even micro-level time frames. Focusing on the True Open as the primary reference point enables faster recognition of potential trend changes and facilitates optimal management of trading positions. In summary, this strategy, based on ICT principles and fractal time concepts, offers a powerful framework for predicting future market movements, identifying optimal entry and exit points, and managing risk in various trading conditions.
Pine Script™ Indikator
von TFlab
3
Multi-Timeframe VWAP Master ProThe Multi-Timeframe VWAP Suite is a comprehensive and highly customizable indicator designed for traders who rely on Volume-Weighted Average Price (VWAP) across multiple timeframes and periods. This tool provides a complete suite of VWAP calculations, including daily, weekly, monthly, quarterly, yearly, and custom VWAPs, allowing traders to analyze price action and volume trends with precision. Whether you're a day trader, swing trader, or long-term investor, this indicator offers unparalleled flexibility and depth for your trading strategy. Multi-Timeframe VWAPs: Daily, Weekly, Monthly, Quarterly, and Yearly VWAPs: Track VWAP across various timeframes to identify key support and resistance levels. Customizable Timeframes: Use the SMA timeframe input to adjust the period for moving averages and other calculations. Previous Period VWAPs: Previous Daily, Weekly, Monthly, and Quarterly VWAPs: Analyze historical VWAP levels to understand past price behavior and identify potential reversal zones. Previous Year Quarterly VWAPs: Compare current price action to VWAP levels from specific quarters of the previous year. Custom VWAPs: Custom Start Date and Timeframe: Define your own VWAP periods by specifying a start date and timeframe, allowing for tailored analysis. Dynamic Custom VWAP Calculation: Automatically calculates VWAP based on your custom inputs, ensuring flexibility for unique trading strategies. Seasonal and Yearly VWAPs: April, July, and October VWAPs: Analyze seasonal trends by tracking VWAP levels for specific months. Yearly VWAP: Get a broader perspective on long-term price trends with the yearly VWAP. SMA Integration: SMA Overlay: Combine VWAP analysis with a Simple Moving Average (SMA) for additional confirmation of trends and reversals. Customizable SMA Length and Timeframe: Adjust the SMA settings to match your trading style and preferences. User-Friendly Customization: Toggle Visibility and Labels: Easily enable or disable the display of specific VWAPs and their labels to keep your chart clean and focused. Color Customization: Each VWAP line and label is color-coded for easy identification and can be customized to suit your preferences. Dynamic Labeling: Automatic Labels: Labels are dynamically placed on the last bar, providing clear and concise information about each VWAP level. Customizable Label Text: Labels include detailed information, such as the timeframe or custom period, for quick reference. Flexible Timeframe Detection: Automatic Timeframe Detection: The indicator automatically detects new days, weeks, months, and quarters, ensuring accurate VWAP calculations. Support for Intraday and Higher Timeframes: Works seamlessly on all chart timeframes, from 1-minute to monthly charts. Previous Year Quarterly VWAPs: Q1, Q2, Q3, Q4 VWAPs: Compare current price action to VWAP levels from specific quarters of the previous year. User-Selectable Year: Choose the year for which you want to calculate previous quarterly VWAPs. Persistent Monthly VWAPs: Option to Persist Monthly VWAPs Year-Round: Keep monthly VWAP levels visible even after the month ends for ongoing analysis. Comprehensive Analysis: Combines multiple VWAP timeframes and periods into a single tool, eliminating the need for multiple indicators. Customizable and Flexible: Tailor the indicator to your specific trading strategy with customizable timeframes, periods, and settings. Enhanced Decision-Making: Gain deeper insights into price action and volume trends across different timeframes, helping you make more informed trading decisions. Clean and Organized Charts: Toggle visibility and labels to keep your chart clutter-free while still accessing all the information you need. Ideal For: Day Traders: Use daily and intraday VWAPs to identify intraday support and resistance levels. Swing Traders: Analyze weekly and monthly VWAPs to spot medium-term trends and reversals. Long-Term Investors: Leverage quarterly and yearly VWAPs to understand long-term price behavior and key levels. Seasonal Traders: Track April, July, and October VWAPs to capitalize on seasonal trends. The Multi-Timeframe VWAP Suite is a powerful and versatile tool for traders of all styles and timeframes. With its comprehensive suite of VWAP calculations, customizable settings, and user-friendly design, it provides everything you need to analyze price action and volume trends with precision and confidence. Whether you're looking to fine-tune your intraday strategy or gain a broader perspective on long-term trends, this indicator has you covered.
Pine Script™ Indikator
von starseedmaster1
2
Correlated asset and Daye's Quarterly TheoryThis indicator is based on the Quarterly Theory concepts from Daye. You can find him mainly on X as traderdaye. It works on a new panel and the quarters will be drawn over the chart of the correlated that you set on its settings. You can use every asset to compare with the main one to make easier to find divergences between days, sessions and 90 minutes cycles. In different timeframes, the indicator could show more or less information about quarters, but will always show the compared asset one. This is due to limitations of the candles start (for example, the Session's Q2 open won't be shown on an hourly chart because it starts after 30 minutes of candle's open). What can this indicator do for you? - Show the correlated asset chart. - Show daily, session and 90 minutes cycle boxes. - Show Midnight and every session's Q2 open. - Make easier for the trained eye to determine if the model is AMDX or XAMD, find PO3, turtle soups, SMT divergences, etc. Do you have any suggestion? Please, leave it on the comments. I'll try to improve this indicator regularly.
Pine Script™ Indikator
von SixxxFo
Quarterly Performance█ OVERVIEW The Quarterly Performance indicator is designed to visualise and compare the performance of different Quarters of the year. This indicator explores one of the many calendar based anomalies that exist in financial markets. In the context of financial analysis, a calendar based anomaly refers to patterns or tendencies that are linked to specific time periods, such as days of the week, weeks of the month, or months of the year. This indicator helps explore whether such a calendar based anomaly exists between quarters. By calculating cumulative quarterly performance and counting the number of quarters with positive returns, it provides a clear snapshot of whether one set of quarters tends to outperform the others, potentially highlighting a calendar based anomaly if a significant difference is observed. █ FEATURES Customisable time window through input settings. Tracks cumulative returns for each quarter separately. Easily adjust table settings like position and font size via input options. Clear visual distinction between quarterly performance using different colours. Built-in error checks to ensure the indicator is applied to the correct timeframe. █ HOW TO USE Add the indicator to a chart with a 3 Month (Quarterly) timeframe. Choose your start and end dates in the Time Settings. Enable or disable the performance table in the Table Settings as needed. View the cumulative performance, with Q1 in blue, Q2 in red, Q3 in green and Q4 in purple.
Pine Script™ Indikator
von Botnet101
Multi-Timeframe Liquidity LevelsMulti-Timeframe Liquidity Levels – Overview The Multi-Timeframe Liquidity Levels indicator automatically displays significant highs and lows from various timeframes (Daily, Weekly, Monthly, and Quarterly) on your current chart. This allows traders to quickly identify potential support and resistance zones without frequently switching between different timeframe charts. Additionally, the script offers extra lines for special reference points (e.g., the “Midnight” midpoint of the current day and the previous day’s open/close) to highlight potential liquidity zones even more clearly. 1. Core Idea and Benefits Time-Saving: Instead of manually reviewing charts in different timeframes, the indicator fetches relevant high/low levels automatically and shows them on your active timeframe. Clear Layout: Traders instantly see where the Daily, Weekly, Monthly, and Quarterly highs and lows lie—areas often associated with institutional orders or liquidity hunts. Customizable: You can tailor the color scheme, line style (Solid, Dashed, Dotted), and line width, ensuring the displayed levels fit your personal charting style. 2. How It Works Multi-Timeframe High/Low For each timeframe (Day, Week, Month, Quarter), the indicator references the previous candle’s high and low (high , low ). Using request.security(...), these values are plotted on the chart you’re currently viewing. Flexible Display You can individually enable or disable the Daily, Weekly, Monthly, and Quarterly lines, depending on which levels are most relevant to your trading. With Line Style (Solid, Dashed, Dotted) and Line Width, you can easily emphasize certain lines you consider more important. Additional Lines “Midnight” Line: A theoretical midpoint between today’s high and low, which can be useful for gauging daily pivot areas. Previous Day’s Open/Close: Many traders track these reference points to anticipate market reactions. You can show or hide these lines as desired. Automatic Line Removal & Creation When a particular timeframe (e.g., “Show Monthly Levels”) is disabled, the script automatically removes the existing monthly lines. Enabling it again recreates those lines without hassle. 3. Usage and Interpretation Identifying Support and Resistance Highs and lows from higher timeframes are often key zones for entries, exits, or major market reactions. A Daily level may be crucial for short-term traders, whereas Monthly or Quarterly levels can indicate long-term liquidity areas. Spotting Market Shifts If price decisively moves above a Higher-Timeframe line, it could signal strong momentum. Conversely, a failed breakout (where price quickly returns under or above a level) might warn of a potential reversal. Extra Lines as Filters The “Midnight” Line helps visualize a rough central price for the current day, aiding in intraday directional bias. Previous Day’s Open/Close: Common reference points for day traders, where swift approaches and rejections can indicate potential entries or partial take-profit zones. 4. Practical Tips Use Color-Coding Wisely: Assign distinct colors (e.g., Blue for Daily, Green for Weekly, Orange for Monthly, Purple for Quarterly) so you can easily discern which timeframe you’re looking at. Toggle On/Off As Needed: Day traders might focus on Daily and Weekly, while long-term traders may pay closer attention to Monthly and Quarterly. Combine with Price Action: Lines alone don’t constitute a trading strategy. Use them alongside candlestick patterns, volume analysis, or other indicators for a more complete market perspective. 5. Important Notes & Recommendations Not Financial Advice: This indicator simply reflects historical high/low data across multiple timeframes and does not constitute a buy or sell recommendation. Trader Responsibility: Observe how the market actually behaves around these lines and adapt your risk management accordingly.
Pine Script™ Indikator
von Jonny86FXPro
1
Daye Quarterly Theory ~ DQT [Liquidity_Pro]Thanks This indicator puts the time-based research of trader Daye on your chart. Daye studied the ICT killzones and macro times and presented his findings, as “Quarterly Theory” on YouTube. Thank you Daye for sharing! This indicator is not the first, so S/O to @toodegrees, @a1tmaniac and @joshuuu for their own excellent Quarterly Theory indicators. Last but not least, huge thanks go to ICT for his trading innovation and generous free price action education and to @twingall for his insight, attention to detail and great teamwork coding this indicator. Daye’s Quarterly Theory First, the fundamental concept is that all units of time can be divided by four into quarters -- just as we look at the year’s corporate reporting cycle of Q1, Q2, Q3, and Q4. Dividing the day by four, into six hour quarters and again into 90 minute quarters and again into 22.5 minute ‘Micro’ quarters we reach the smallest unit shown by this indicator. Apply it to your NQ1! or ES1! charts and you may see remarkable confluence with the ICT macro times! Why would we want to do this? It helps us understand, visualize and predict ICT’s PO3 concept: • A - Accumulation (required for a cycle to occur) • M - Manipulation • D - Distribution • X - Reversal/Continuation The bottom line - we want to sell after a manipulation (M) up, or buy after a manipulation down and Quarterly Theory plots times on your chart where this may occur. Every asset is different, so back-test and research it. Note, this indicator always shows Q1 as the accumulation quarter (by color), but the order is not fixed and instead of AMDX may appear as XAMD, where Q1 is the Reversal/Continuation quarter. We may eventually offer an update to this indicator which would automatically transpose the quarter colors for you. The Quarters Yearly: • Q1 - Jan, Feb, Mar • Q2 - Apr, May, Jun • Q3 - Jul, Aug, Sep • Q4 - Oct, Nov, Dec Monthly (starts with the first month’s Monday regardless of the date): • Q1 - Week 1, first Monday of the month • Q2 - Week 2, second Monday of the month • Q3 - Week 3, third Monday of the month • Q4 - Week 4, fourth Monday of the month Weekly (Daye ignores Friday and Sunday’s price action): • Q1 - Mon • Q2 - Tue • Q3 - Wed • Q4 - Thu Daily (times are all EST / New York): • Q1 - 18:00 - 00:00 Asia • Q2 - 00:00 - 06:00 London • Q3 - 06:00 - 12:00 NY AM • Q4 - 12:00 - 18:00 NY PM 90 Minute: • Q1 - 18:00 - 19:30 • Q2 - 19:30 - 21:00 • Q3 - 21:00 - 22:30 • Q4 - 22:30 - 00:00 Micro (22.5 minute quarters, DQT only displays Micros on 7 minute TF or lower) • Q1 - 18:00 - 18:22:30 • Q2 - 18:22:30 - 18:45 • Q3 - 18:45 - 19:07:30 • Q4 - 19:07:30 - 19:30 About the DQT Indicator This indicator plots the quarterly time boxes in a panel which can be placed above or below your chart. It allows you to add labels with the opening time and dates and also place time of day markers which can be useful for anyone who wants to mark lunch, and of the trading day or perhaps a favorite ICT macro time. It also works on GOLD (CAPITALCOM), DXY (TVC), currencies and stocks in Regular Trading Hour (RTH) mode. Note the way that the indicator displays quarters is affected by the time frame you are viewing and as a result you may notice imperfections. Also, the indicator is not tuned to work with every broker, so for example with DXY, you will see the TVC feed is displayed nicely but other feeds are not. Settings The DQT indicator offers a great deal of flexibility to customize the display of quarters aesthetically. But it’s designed to work out-of-the-box on both light and dark background charts. It's set up to only show 90 minute and micro quarters initially, but in the settings, you can turn on the daily, weekly, monthly, and yearly quarters. Remember you will only see the Micros on the 7 minute TF or lower. Lastly, the DQT indicator works well with our DOB indicator allowing you to visualize the confluence of high timeframe PDAs or POIs with manipulation quarters. If you find our indicators useful, please boost, comment and share -- it's very motivational for us to develop them further and publish new ones!
Pine Script™ Indikator
von Liquidity_Pro
14
Daye Quarterly Theory by toodegrees> Introduction and Acknowledgements The Daye Quarterly Theory° tool encompasses the cyclical Time aspect of the markets as studied and developed by Daye (traderdaye on Twitter). I am not the creator of this Theory, and I do not hold the answers to all the questions you may have; I suggest you to study it from Daye's tweets and material. I collaborated directly with Daye to bring a comprehensive Time tool to Tradingview. S/O to @a1tmaniac and @joshuuu for their previous works on this Theory. > Tool Description This is purely a graphical aid for traders to be able to quickly determine Daye's Quarterly Cycles, and save Time while on the charts. The disruptive value of this tool is that it reliably plots forwards in Time, allowing you to strategize and tape read efficiently; as well as calculating all the Cycles, from Micro Sessions, to the Year. 
> Quarterly Theory by Daye The underlying idea is that Time is to be divided in Quarters for correct interpretation of Market Cycles. The specific starting point of a Cycle will depend on the Timeframe at hand.
 Daye being one of the most prominent Inner Circle Trader students, these ideas stem from ICT's concepts themselves, and are to be used hand in hand (PD Array Matrix, PO3, Institutional Price Levels, ...). These Quarters represent: 
A - Accumulation (required for a cycle to occur) 
M - Manipulation 
D - Distribution 
X - Reversal/Continuation The latter are going to always be in this specific sequence; however the cycle can be transposed to have its beginning in X, trivially followed by A, M, and finally D. This feature is not automatic and at the subjective discretion of the Analyst. Note: this theory has been developed on Futures, hence its validity and reliability may change depending on the market Time. This tool does provide a dynamic and auto-adapting aspect to different market types and Times, however they must be seen as experimental. > Quarterly Cycles The Quarterly Cycles currently supported are: Yearly, Monthly, Weekly, Daily, 90 Minute, Micro Sessions. – Yearly Cycle: Analogously to financial quarters, the year is divided in four sections of three months each Q1 - January, February, March Q2 - April, May, June (True Open, April Open) Q3 - July, August, September Q4 - October, November, December Note: this Cycle is the most difficult to optimize as Timeframes become more granular due to the sheer length of its duration. With Time and advancements it will become more accurate. This is the only Cycle for which accuracy is not 100%. – Monthly Cycle: Considering that we have four weeks in a month, we start the cycle on the first month’s Monday (regardless of the calendar Day). Q1 - Week 1, first Monday of the month Q2 - Week 2, second Monday of the month (True Open, Daily Candle Open Price) Q3 - Week 3, third Monday of the month Q4 - Week 4, fourth Monday of the month – Weekly Cycle: Daye determined that although the trading week is composed by 5 trading days, we should ignore Friday, and the small portion of Sunday’s price action. Q1 - Monday Q2 - Tuesday (True Open, Daily Candle Open Price) Q3 - Wednesday Q4 - Thursday – Daily Cycle: The Day can be broken down into 6H quarters. These Times roughly define the sessions of the Trading Day, reinforcing the Theory’s validity. Q1 - 18:00 - 00:00, Asian Session Q2 - 00:00 - 06:00, London Session (True Open, Midnight New York Time) Q3 - 06:00 - 12:00, NY Session Q4 - 12:00 - 18:00, PM Session Note: these Times are based on Futures Trading in New York Time, these will vary depending on the market type (experimental). – 90 Minute Cycle: Merely dividing one of the Daily Cycle’s Quarters we obtain 90 minute quarters. The first one in a Trading Day – 90min Cycles of the Asian Session – follows as an example, in New York Time. Q1 - 18:00 - 19:30 Q2 - 19:30 - 21:00 (True Open) Q3 - 21:00 - 22:30 Q4 - 22:30 - 00:00 – Micro Cycle: Lastly, dividing a 90 Minute Cycle yields 22.5 Minute Quarters, known as Micro Sessions. An example breaking down the 90 Minute Cycle from 18:00 to 19:30 follows. Q1 - 18:00 - 18:22:30 Q2 - 18:22:30 - 18:45 (True Open) Q3 - 18:45 - 19:07:30 Q4 - 19:07:30 - 19:30
 Note: trivially, these may not be exact unless the Timeframe is in the seconds, to correctly account for the half minute in each quarter – this said the tool is able to plot these anyways, although slight inaccuracy needs to be taken account depending on the Timeframe. 
It is important to remember and be aware that the current chart’s Timeframe will heavily impact the plotted Time Cycles. This tool is in its initial form and it will be improved and adapted as traders start using it on a daily basis. > Tool Settings Plot Settings: "Plot Type" will allow you to decide how the Cycles will be displayed. Out of the box the tool will be plotted on a separate pane, at the bottom of the chart; you can decide the orientation of the cycles from longest cycle at the bottom (Bottom Pane), or top (Top Pane). Alternatively you can move the tool to the chart and have the cycles plot on price (Move To -> Existing Pane Above), specifically above price (Top), or below (Bottom). The cycles will auto adjust their position based on the visible price action. "Historical Cycles" will show previous Historical Cycles, up to where available in terms of script memory. "Plot Size" will allow you to vary the height of the Cycle’s boxes "Show Labels" will give you an auto-adapting legend which will help you determine which Cycle is which if you get lost. 

The remaining Settings are self explanatory, allowing you to change colors, and choose which Cycles to see. The source of the code is hidden due to the use of private libraries of mine. Happy to answer any questions in terms of code, where I will not be able to divulge any detail that concerns said libraries. Thank you for understanding! Major thanks to Daye for his Time and Knowledge, it was a pleasure to collaborate and work together on this tool. GLGT!
Pine Script™ Indikator
von toodegrees
99
Daily Monday Weekly Monthly Quarterly Yearly High Low Mid This indicator can be useful for traders who are interested in analyzing price movements over different time periods. By displaying the daily, Monday, weekly, monthly, quarterly, and yearly high and low values along with their mid values on a chart, traders can get a better understanding of how prices have behaved over longer periods of time. For example, a trader might use this information to identify trends or patterns in the market. They might look for occasions when the daily high and low values move outside of an established range or when the weekly or monthly mid values cross certain key levels. This could signal a potential change in the market trend that the trader could act upon. Additionally, the code can help traders identify key support and resistance levels based on the high and low values of the candles. By plotting these values on a chart, traders can see where prices tend to find support or resistance over different time periods. This information can be used to place stop loss orders or take profit orders at important levels. Overall, the benefit of using the code you provided is that it offers traders a comprehensive view of price movements over different time periods, which can aid in making more informed trading decisions. Each level described above has its own unique label, which is abbreviated for convenience. These abbreviations are listed below for quick reference: For daily levels: DH (Daily High), DM (Daily Mid), and DL (Daily Low) For Monday levels: MonH (Monday High), MonM (Monday Mid), and MonL (Monday Low) For monthly levels: MH (Monthly High), MU50 (Monthly 50 percent of Mid and High), MM (Monthly Mid), MD50 (Monthly 50 percent of Mid and Low), and ML (Monthly Low) For quarterly levels: 3MH (Quarterly High), 3MU50 (Quarterly 50 percent of Mid and High), 3MM (Quarterly Mid), 3MD50 (Quarterly 50 percent of Mid and Low), and 3ML (Quarterly Low) For yearly levels: YH (Yearly High), YU50 (Yearly 50 percent of Mid and High), YM (Yearly Mid), YD50 (Yearly 50 percent of Mid and Low), and YL (Yearly Low) These labels can help you quickly identify the different levels and keep track of important price points. If the chosen timeframe does not fall under the category of intraday, daily and Monday level will not be displayed. Please feel free to send your suggestions to @z_mehran.
Pine Script™ Indikator
von gadatas
8
Seasonal Performance for Stocks & CryptoThe Seasonal Performance indicator quickly allows you to see if you are in a bullish or bearish time of year for an underlying security and where the current performance stacks up compared to the same time of year historically. Table is fully customizable from colors to what data to see. Table Displays Average Performance Best Performance Worst Performance Last Performance Current Performance Note this indicator will only work with Stocks, ETF's, Index's or Crypto.
Pine Script™ Indikator
von Amphibiantrading
4
Quarterly Returns in Strategies vs Buy & HoldThis is a Quarterly Returns version of Monthly Returns in PineScript Strategies by QuantNomad This script shows a table of Quarterly/Yearly performance of your strategy. It also provides an option to compare with Buy & Hold. The script can easily integrated to your strategy. All you need to do is copy the table part and paste it at the end of your script Disclaimer Please remember that past performance may not be indicative of future results. This post and the script don’t provide any financial advice.
Pine Script™ Strategie
von Dannnnnnny
Price Action All In One IndicatorIf you are the one who is "Price Action" style & does not want to use many indicators or complex indicators or you are an ICT (The Inner Circle Trader) student or ICT charter, this simple beautiful All In One Indicator is right for you. The indicator has the following functions. TIME ZONE SETTING The default timezone is New York Time GMT-4, if you leave the time zone setting blank, it will use the symbol timezone. Note that the trading time changes with one hour delay in winter. so if you just trade forex, and leave the time zone setting blank, TradingView will adjust the symbol timezone automatically for you or don't forget to change the timezone setting GMT-4 or GMT-5 depending on daylight saving time. STATISTIC PANEL You can choose which panel to show through settings. Session Info Panel : pips info of ADR, Asian, London, and New York sessions. Trend Panel : showing trend (up/down) of 5m/15m/1h/4h/D/W time frames (TF) 4MA (default values: SMA with lengths: 20–50–100–200) Money Management Panel : in trading, money management is very important. Just put the % risk, & stop loss value below, the indicator will calculate a suitable size/amount for each trade. Size by Lots: input stop loss in pips Size by Units: input stop loss in % (of price) (*)Units size is calculated by % stop loss & current bar close price. You have to determine a stop-loss price to convert to % stop loss by yourself. TIME SEPARATORS We can choose which time separators we want to display. The indicator has 5 options: Anchor Time/Day/Week/Month/Quarter. Of course, we can choose to show just one or all 5 of them. With Anchor Time you can choose which time you want to draw a vertical line for better timing analysis. This can show up to 2 Anchor Time lines. The default values are 00:00 (New York Midnight Opening) and 08:30 (New York Session Opening). You also have an option to show the past lines or not. About Day Separator, cause TradingView has supported Session Breaks in Setting but if you don't like to use it or when enabling, it distracts you, you can use mine. My favorite trading dates are Tuesday & Wednesday. PRICE LEVELS For intraday trading, the high/low/close of the previous day, the previous week, ADR (default period is 5) are very important key levels. You can choose which one you like to show for better analysis. Of course, you can change the color & style of the lines. This is also my favorite indicator. This indicator also has an option to show up to 2 price lines at a specific time, you can choose the price type (high/low/close/open) that you want to display. The default time values are: Specific Time 1: 0:00. (New York Midnight Opening Price) Specific Time 2: 8:30 am. (New York Session Opening Price) ACCUMULATION ZONE The market tends to reprice the higher/lower to the old high/low or imbalance/fair value price to promote buy/sell stops or to provide smart money pricing for long/short entries. Typically, it redistributes quickly and you must learn to anticipate them at key levels intraday. Weak short/long holders will be squeezed in the retracement. Except for the open price, the price changes continuously until the closing time, so the accumulation area can also be changed in real-time, but if you combine it with other information when analyzing, you can predict/determine whether the zone has been established or not with high probability. In short, price needs time to be accumulated, I usually don't pay attention to this daily zone till London open/close or New York sessions Not only daily zone, but the indicator also supports higher timeframes accumulation zone from SESSION & STD There are 3 sessions: Asian, London, New York. The default values are below (New York Time). Asian: 19:00 ~ 00:00 London Open (London KillZone): 01:00 ~ 05:00 New York Open (New York KillZone): 07:00 ~ 10:00 If you do not want to show the label, just leave the label values blank or change them to whatever you want. This is one of my favorite functions. I use it on 15m, 30m, 1h TF for Forex intraday trading. My favorite trading sessions are London Open & New York Open. You also can choose to show or not Standard Deviations (STD). The default values are set for Asian Range STD and max STD levels can be shown are 5. I use the following 3 types of STD (New York Time): CBDR (Central Bank Deviations) STD: 14:00 ~ 20:00 Flout STD: 15:00 ~00:00 Asian Range STD: 19:00 ~ 00:00 LOOKBACK HIGH/LOW/MID Can show high/low/mid of the data ranges on the daily/4h chart. The default values are: - 20–40–60 days back from today for daily TF. - 30–60–90 bars back from the latest bar for 4h TF. The default anchor bar for calculating the lookback is the latest one but with: - 4h TF: we can change the lookback from the 1st day of the week. - Daily TF: we can change the lookback from the 1st day of the month. The indicator also has options showing the high/low/mid (equilibrium level) lines for better analysis. Especially, on daily TF, we have the option that can show up to 4 lines (25% for each one) of the data range. Of course, you can change the colors or the style of the high/low/mid lines. The lookback can be shown on the lower TFs for better detection when the market structure is shifted. MAGIC BARS Fractal bar : The bar's color is changed when the divergence occurs between the price & RSI. You can change the RSI period (default value is 14) & RSI source. (open/high/low/close,…) Imbalance bar or liquidity void or fair value gap - whatever you call it. This is my favorite indicator when trading on all TFs.You can choose to extend the last n imbalance bars if you like in the settings. I make sure I covered all cases of imbalance/fair value gap. OLD HIGH/LOW First, this function is not used as the common Support & Resistance that retail traders usually use, so I call it Old High/Low. I usually use it in 2 ways: Detect the next buy/sell stops that Market Makers aim to manipulate. Detect whether market structure shifted or not (Break of structure) In settings you can: Set the period to detect high/low levels, the default value is 10. My other favorite values are 6 & 2. On a lower time frame, you might want to set it to a large number to remove noise. On a higher time frame, a small number is enough, I think. Choose the numbers of the last lines you want to show on your chart. Of course, the style of lines can be changed easily. TRENDLINES A very simple trendline with default pivot left strength is 10. By default, trendline uses high/low price but you have the "Using close price" option. LINEAR REGRESSION CHANNEL The Linear Regression Channel is a three-line technical indicator used to analyze the upper and lower limits of an existing trend. It is a statistical tool used to predict the future from past data and is used to determine trend direction or when prices may be overextended. You can choose To fill the background or not To show inner/outer lines or not To change the colors/line styles of upper zone, lower zone, upper lines, lower lines, midline DIRECTION BOX Working on all TFs, this looks like the same with lookback function but if you would like to display them in a box for easily focusing/comparing with other symbols or for detecting divergence in a specific period. The indicator also has a setting to show or hide lines connecting between lows or highs. Another example of how I use High/Low connecting lines to detect divergence between S&P 500 and NASDAQ 100. ZIG ZAG Can show up to 2 ZigZag lines. This is suitable for traders who have difficulty in detecting key levels (recent high/low) of the prices to confirm market structure or just for drawing Fibonacci easily at those levels. MA (Moving Average) I believe that this is one of the most used indicators for every trader. There are 5 types of MA to choose from: EMA, SMA, WMA, VWMA, SMMA(RMA). This can show up to 4 MAs. You can choose the source (close/high/low,…) for each one. My favorite values are 34 & 89 EMA. This indicator also supports MA Bands. You can select which MA you want to display the bands, and the "width" of the bands can be changed via the settings. WATERMARK It's just a simple function but I think it's very useful for those who want to add Copyright info to the chart, to prevent others from copying it. Others/known issues/limitations In forex or stock (things that are traded only on weekdays), TradingView's does not include the latest bars till Monday so the Day Separator cannot fill that space. Because TradingView deals with those bars as Sunday's ones so I set the color of Sunday the same as Friday for good UI/UX. On Crypto charts, the indicator shows without problems. If you see "Internal server study error", please try closing the current TradingView tab in your browser and reopening it in a new tab. The error will disappear. Because TradingView does not provide any detailed error information when such "general error" occurs. It's very difficult to detect which function is causing this error or is there something that caused TradingView "overloaded" through a long time running/loading on that tab? Honestly, I don't know exactly the cause, but in my experience, this error often occurs in the following cases: When you have the TradingView Tab open for hours. In my case, I usually leave TradingView tab open overnight & when I come back the next day, this error might appear. (I'm a Mac user & I almost never shut down my Mac) When you change settings too many times, especially settings of drawing objects like line width in a using session, it might cause this error. So, after changing the setting or when you come back for the next trade, please save & close that TradingView tab, and then open a new one, everything will work fine. You can see the images below that show I have tested my indicator from 1-minute time frame, enabled all functions, change every setting to max values & everything still works fine.
Pine Script™ Indikator
von tranholenguyen
61
Average Quarterly and Annual Gain/Loss (Color Divided)Hello! Simple script here! (BE SURE TO TRY WITH BAR REPLAY) This indicator measures the current quarterly gain/loss (Q1, Q2, Q3, Q4) and the average quarterly gain/loss. The average percentage gain/loss for Q1, Q2, Q3, and Q4 are calculated and displayed on the chart; colors are adjustable. By default, Q1 is measured as blue, Q2 as green, Q3 as red and Q4 as yellow. Also measured is the average annual percentage gain/loss and the current year's running gain/loss. Years are split by a dashed line, beneath which a label displays that year's percentage gain or loss, in addition to the average annual gain or loss. Labels and lines update per bar! A constantly updating line connects the high price of the first session for a quarter to the current high price. The line will delete and restart when a new quarter occurs. Labels, lines, and line fills are color coded. So, any change to the quarterly/annual color scheme will change the color for all labels, lines, and line fills for that particular quarter! Thanks for reading!
Pine Script™ Indikator
von KioseffTrading
4
Financial Highlights [Fundamentals]█ OVERVIEW This indicator plot basic key financial data to imitate the presentation format of several popular finance site, make it easier for a quick glance of overall company financial health without switching tabs for every single stocks. █ Financial Data Available: - Revenue & PAT (Profit after Tax) - Net Profit Margin (%) - Gross Profit Margin (%) - Earnings Per Share (EPS) - Dividend █ Features: - Toggle between Quarter/Annual Financial Data (Notes: For Dividends, it will always be plotted based on Annual data, at Financial Year ending period) - Options to plot at either at Quarter/Yearly ending period OR Financial Data published date █ Limitation - The accuracy of the data subject to Tradingview's source, but from my observation it's accurate 95% of the time - Recently published data might not be available immediately. e.g. MYX exchange tends to have 1-3 days lag - More information on Tradingview's financial data can be read here -> www.tradingview.com █ Disclaimer Past performance is not an indicator of future results. My opinions and research are my own and do not constitute financial advice in any way whatsoever. Nothing published by me constitutes an investment recommendation, nor should any data or Content published by me be relied upon for any investment/trading activities. I strongly recommends that you perform your own independent research and/or speak with a qualified investment professional before making any financial decisions. Any ideas to further improve this indicator are welcome :)
Pine Script™ Indikator
von fareidzulkifli
15
Financial Statement (Quarterly)This is an advanced tool to analyze the economic and financial health of a company. The tool uses exactly the same data as built-in quarterly financial metrics by TradingView. Provides better visualization and additional indicators (maximum, minimum, average, median, linear regression) that greatly simplifies the analysis of financial data. If you have ever used the built-in metrics then you will get what I mean: 214 metrics available except: Dividends payable Notes payable Other short term debt Float shares outstanding KZ index Net income per employee Number of employees Revenue per employee Stay cheeki breeki and don't get sick. Good luck!
Pine Script™ Indikator
von everget
27
Day & Week & Month & Quarter & Year Open Price PointsPresent to your attention, basic “Day & Week & Month & Quarter & Year Open Price Points Indicator” ! You can determine support & resistance using Yearly, Quarterly, Monthly and Weekly open price points on a chart with any timeframe. It is not a widely used technique, but according to different academic studies, levels are reliable. Google it! You can enhance your trading by adding that technique in your tool list. At the current stage, Indicator shows Open Price Points. Opening price points are extended into the future from the opening candle of each year, quarter, month and week and day. By nature of that points, every level may be used as a support and as a resistance level at a similar time. Initial setup: 1) Open the indicator Inputs settings, enable/disable additional Price Points. 2) Open the indicator Style settings, click on a style of each line and click on a “Price Line.” How to use that? With a lot of available strategies, there are two leading: Level convergence and Trend line convergence. 1) Level convergence involves locating two or more opening points that merge. This confluence can lead to greater accuracy and profitability. 2) Trend line convergence - The intersection of a trend line at a weekly, monthly, quarterly or even yearly opening level can produce fast and profitable reactions. Try that! As a stand-alone strategy, you can utilize that: Price action under the WO (DO, MO, QO, YO) – Bearish Price action above the WO (DO, MO, QO, YO) – Bullish TIP: opening level not always good as a stand-alone tool! Indicator Settings: Show Daily Open (disabled by default) Show Weekly Open (ON by default) Show Monthly Open (ON by default) Show Quarter Open (disabled by default) Show Yearly Open (disabled by default) Indicator Styling: By default, each line is shown in the form of circles, line-width 1, silver colour. Labels can be only in one of two states: Maroon (if open price less than ((open + high + low + close)/4) or Teal (if open price high than ((open + high + low + close)/4). Alerts: With the Indicator you can add a few different alerts: DO Alert WO Alert MO Alert QO Alert YO Alert Play with it: Add a new alert with following condition: your SYMBOL crossing DWMQY OPP Weekly Open. Options: Once per Bar. Future of the Indicator: The Indicator is a necessary part of more prominent Indicator which will include 8 modules in total: 2~ Arabian Wise Tunnels Module 3~ RH Waves Module (something like Vegas Waves) 4~ Trend Channels Module 5~ Opening Range Zoning Module 6~ Breakout Module 7~ BS Hemisphere Module 8~ Price Action Module DISCLAIMER! RISK WARNING! PAST PERFORMANCE IS NOT NECESSARILY INDICATIVE OF FUTURE RESULTS. TRADERS SHOULD NOT BASE THEIR DECISION ON INVESTING IN ANY TRADING PROGRAM SOLELY ON THE PAST PERFORMANCE PRESENTED, ADDITIONALLY, IN MAKING AN INVESTMENT DECISION, TRADERS MUST ALSO RELY ON THEIR OWN EXAMINATION OF THE PERSON OR ENTITY MAKING THE TRADING DECISIONS. //Written by iambitboy request.
Pine Script™ Indikator
von Kopachelli
7
Key Earnings Level by Tim WestKEY EARNINGS LEVELS: 1. It is a composite price of an equity with a quarterly earnings report. The price line attempts to indicate the most important price for the release of earnings of that company. Only companies that have quarterly earnings will be able to have Key Earnings Levels. Indexes, commodities or other futures and crypto markets will not have these lines available. After the earnings release (aka "ER"), the stock will tend to be supported by the price of the Key Earnings Level (KEL). If the stock is NOT supported at the KEL, then you can assume the stock is under distribution and one could further assume the earnings report was not accepted well by the market and the stock will likely continue to be sold in the future until the KEL no longer stops the advance of the stock. 2. The Earnings Level is designed to be plotted on the DAILY time frame only, and not the weekly or monthly time frames. It is also not designed for the hourly or any time other than daily. 3. Earnings Levels seem to be useful for a long period of time, perhaps up to a year or more based on the observations that I have done since 2012-2014 when I created the concept. I designed the software to allow you to advance the line forward in time by periods of 3 months, 6 months, 9 months and 12 months. The levels could last longer and you could add a "horizontal ray" at each earnings level so that it extends indefinitely into the future. 4. There are many additional uses of KEL's that include a combined KEL for an index, such as the DJIA, SP500 or any other basket of stocks if you combine all of the stocks KEL's together to form a market support/resistance level. I have published this research here at TradingView under the $DJI DJIA symbol. 5. The concept behind this EARNINGS RELEASE is to also see HOW VOLATILE a stock is on the day before, day of and day after the EARNINGS are released as a gauge of uncertainty in the stock. The larger the range of the stock price on an EARNINGS report, the more varied the opinions are of investors and the more uncertain analysts are on the valuation of the company or its future outlook. Volatility is an important concept for risk management in a stock and understanding how volatile a stock is on the 4 most important days of the year for any stock will help any investor understand more deeply about the risk of the stock itself. 6. I comment on stocks using the earnings levels concepts in chat room Key Hidden Levels here at TradingView for many years now. I am eager to hear your comments and success with this tool and others and hope you can pass it along to others to help them be informed too.
Pine Script™ Indikator
von timwest
14