Auf geht's

Pullback

AG Pro Trend Continuation Quality [AGPro Series]AG Pro Trend Continuation Quality Overview / What it does AG Pro Trend Continuation Quality is an overlay built to evaluate whether a pullback is behaving like a healthy retracement inside an active trend, or whether the move is losing structural quality before continuation can develop. Instead of treating every dip in an uptrend or every pop in a downtrend as equally important, the script isolates pullback sequences and scores them through a continuation-quality framework. The goal is not to predict every next candle. The goal is to help traders judge whether the market is showing disciplined retracement behavior that often precedes trend continuation. The model combines trend alignment, pullback depth, pullback duration, relative volume behavior during the retracement, and the strength of the bounce candle that attempts to resume the trend. These conditions are translated into a compact quality score so the user can quickly separate cleaner continuation structures from weaker ones. On the chart, the script highlights pullback zones, tracks the retracement box, displays a continuation-quality label, and maintains an information panel that summarizes trend state, recent quality readings, best quality, average quality, and internal distribution data. The result is a workflow-oriented continuation map rather than a simple trend-following overlay. Unique Edge The distinctive part of this script is that it does not label trend continuation from trend direction alone. A bullish EMA stack or bearish EMA stack is not enough by itself. The script specifically evaluates the quality of the retracement before the continuation attempt is scored. That makes it meaningfully different from basic EMA trend tools, pullback highlighters, or single-condition continuation signals. Many tools can say that price is above or below an average. Fewer tools attempt to measure whether the internal anatomy of the pullback remains constructive for continuation. The scoring engine focuses on five practical questions: 1. Is the broader trend aligned? 2. Is the pullback still structurally controlled rather than excessively deep? 3. Did the retracement last a reasonable number of bars? 4. Did volume contract during the pullback instead of expanding aggressively against trend? 5. Did the bounce show enough intent to suggest renewed directional participation? This creates a cleaner framework for evaluating continuation setups in a way that is visual, systematic, and easier to compare across multiple pullbacks on the same chart. Methodology The script first determines directional context using EMA alignment and, when needed, swing-structure logic. This creates a working trend state that frames whether the script should be looking for bullish or bearish pullback behavior. Once a directional leg is active, the script begins tracking a pullback when price retraces against that trend. During the retracement, it measures: - how far the pullback travels relative to the prior trend leg, - how many bars the pullback lasts, - how pullback volume compares with the prior expansion leg, - and whether the bounce candle shows convincing re-engagement. These components are translated into a 0 to 10 quality score. Higher scores represent more orderly and structurally coherent pullbacks. Lower scores represent weaker or more suspect retracements. The visual output is designed to make those evaluations easier to read in real time: - pullback boxes frame the retracement zone, - optional fib-depth line shows the deepest retracement point tracked inside the pullback, - labels display score, quality grade, depth, duration, and relative volume, - panel metrics summarize the current continuation environment. Signals & Alerts The script is designed as a quality-mapping tool, not as an automatic trade system. Its event logic revolves around the completion of a pullback and the appearance of a bounce candle that attempts to resume the trend. When that bounce qualifies, the script calculates the final continuation-quality score and can display the setup if it meets the user-defined minimum score threshold. Available workflow signals include: - active bullish or bearish trend state, - pullback in progress, - completed pullback with scored continuation attempt, - high-quality continuation events when the score reaches stronger thresholds. Optional alerts can be used for: - high-quality continuation conditions, - or any scored pullback event, depending on user preference. Because alerts are tied to the script’s scoring and confirmation logic, they are intended to support chart review and decision-making rather than act as guaranteed execution instructions. Key Inputs EMA Fast Length / EMA Mid Length / EMA Slow Length These define the trend stack used to frame directional bias. Swing Pivot Length Controls the swing-structure sensitivity used in secondary trend detection. Max Pullback Depth (%) Defines how strict the script is when assessing whether a retracement remains healthy relative to the prior trend leg. Min Pullback Bars / Max Pullback Bars Controls the acceptable pullback duration window. Volume Decline Ratio Helps determine whether the retracement is occurring on lighter activity relative to the prior directional leg. Minimum Score to Display Filters weaker continuation events from the chart. Label Size / Label Offset / Reduce Label Overlap Lets the user adapt chart readability to their own zoom level and instrument volatility. Panel Position / Panel Font Size / Panel Theme Allows the continuation dashboard to be integrated into different chart layouts without dominating screen space. Limitations & Transparency This script does not know future market intent. It evaluates observable price and volume behavior after conditions form on the chart. A high score does not guarantee continuation. It only indicates that the completed pullback meets the script’s internal definition of stronger continuation quality relative to other pullbacks. The model is also sensitive to market regime. Trend continuation behavior tends to be clearer in directional markets and less reliable in highly compressed, erratic, or news-driven conditions. Volume behavior can vary across instruments and data feeds. On some assets, especially where volume data is synthetic, limited, or structurally uneven, the volume component should be interpreted with caution. Like other structure-based tools, this script can produce different practical usefulness depending on timeframe, instrument, volatility regime, and chart cleanliness. Users should calibrate inputs based on the market they are studying rather than treating defaults as universal settings. This script should not be viewed as: - a prediction engine, - a standalone trade system, - a replacement for risk management, - or a guarantee that a bounce will develop into a full continuation leg. Risk Disclosure This script is for chart analysis and educational use. It is designed to help users study pullback quality inside established trends, not to provide financial, investment, or trading advice. All trading and investing involve risk. Market conditions can change quickly, and even high-quality continuation structures can fail. Users should apply their own confirmation process, position sizing rules, and risk controls before acting on any market observation. Use the script as a structured continuation framework, not as certainty.
Pine Script® Indikator
von AGProLabs
2
AG Pro Supertrend Pullback Quality [AGPro Series]AG Pro Supertrend Pullback Quality OVERVIEW AG Pro Supertrend Pullback Quality is an overlay indicator built to evaluate the quality of pullbacks that occur inside an already established Supertrend direction. This script is not designed as a simple Supertrend flip tool. Instead of focusing on every direction change, it studies whether a pullback into the active Supertrend structure is orderly, controlled, and potentially supportive of trend continuation. The goal is to help users distinguish between clean retracement behavior and weaker pullbacks that may reflect noise, instability, or reduced trend quality. The indicator combines Supertrend context with a structured quality model. When price interacts with the active trend line and surrounding touch zone, the script evaluates that event using several internal dimensions such as pullback depth, line acceptance, rejection behavior, recovery efficiency, and local noise conditions. The result is summarized into a class-based readout so the chart remains visual and practical. Because of this design, the script is better understood as a continuation-quality classifier than as a traditional signal generator. It does not attempt to predict every reversal, and it does not assume that all pullbacks within trend are equal. Its main purpose is to organize pullback structure into a clearer analytical framework. UNIQUE EDGE The core difference of this script is its emphasis on pullback quality rather than trend flips. Many Supertrend-based tools are centered around directional transitions. That approach can be useful, but it also tends to compress several different market behaviors into a single yes/no event. In practice, not every trend pullback carries the same structural character. Some are shallow and noisy, some are too deep, and some interact with the trend line in a more orderly way before continuation attempts develop. AG Pro Supertrend Pullback Quality focuses on that middle layer. It studies what happens after a trend is already active and asks a more specific question: is the current pullback behaving like a controlled retracement, or is it showing weaker continuation quality? This creates a more workflow-oriented reading model. Instead of using Supertrend only as a directional switch, the script uses it as a live structural reference and grades the quality of pullback interaction around that reference. That makes the tool different from standard flip scripts, entry-only markers, and pure trend state displays. METHODOLOGY The script begins with the native Supertrend framework to define active directional context. Once a bullish or bearish state is established, a touch zone is formed around the relevant Supertrend line using ATR-based spacing. This zone is not meant to represent a guaranteed support or resistance region. It is a structured interaction area used to evaluate how price behaves during retracement. From there, the script evaluates pullback quality through several components: 1) Trend State and Age A newly flipped trend often behaves differently from a more established one. For that reason, the script includes a stabilization concept and tracks how mature the current trend leg is before weighting pullback quality. 2) Pullback Depth The retracement is measured relative to ATR and recent price structure. Pullbacks that are too shallow may carry limited informational value, while pullbacks that are too deep may indicate reduced continuation quality. The script scores depth inside a preferred operating range rather than treating all pullbacks equally. 3) Acceptance Relative to the Supertrend Line A pullback is not evaluated only by whether price touches the zone. The script also checks whether price remains positioned in a way that supports the active trend state. This helps separate cleaner acceptance behavior from weaker interaction. 4) Rejection Character When price reaches the pullback area, candle behavior matters. The script looks at rejection-style characteristics within the touch and recovery window to estimate whether price is responding constructively to the active trend reference. 5) Recovery Efficiency After contact with the zone, the script measures whether the market recovers with enough directional efficiency. Fast and orderly recovery behavior is treated differently from hesitant or weak re-expansion. 6) Noise Filter Frequent directional churn and inefficient travel can reduce the usefulness of pullback classification. The script includes a noise component so that structurally weaker environments do not receive the same quality treatment as cleaner trend conditions. These components are combined into a final score, which is then mapped into a simple class output. This makes the visual output easier to read without hiding the fact that pullback quality is multi-factor by nature. QUALITY CLASSES The final result is summarized into four broad classes: A-Class Represents the strongest pullback quality readings among the currently evaluated conditions. B-Class Represents constructive pullback quality, but with less strength than the highest tier. C-Class Represents acceptable but weaker pullback structure. Weak Represents pullback conditions that do not meet the stronger quality profile. These classes are meant to organize chart behavior, not to forecast a required outcome. They should be interpreted within broader market context, timeframe behavior, and the user’s own process. CHART ELEMENTS The script includes several visual layers: - Supertrend line for directional context - ATR-based touch zone around the active Supertrend reference - Pullback quality labels for qualified events - Compact information panel showing trend state, depth, acceptance, rejection, recovery, noise, and final status The visual design is intentionally restrained so that price remains readable. The goal is to keep the chart informative without turning the overlay into a dense signal map. SIGNALS AND ALERTS The script can generate alerts for the following event types: - Bullish Pullback Quality Ready - Bearish Pullback Quality Ready - Bullish Pullback Confirmed - Bearish Pullback Confirmed - Bullish Pullback Invalidated - Bearish Pullback Invalidated In general terms, Ready events indicate that the recent pullback has achieved the minimum quality conditions defined by the model. Confirmed events require stronger follow-through logic. Invalidated events help flag cases where a previously qualified pullback context is no longer aligned with the prior state. These alerts are designed as structured workflow checkpoints rather than standalone instructions. KEY INPUTS ATR Length Controls the ATR foundation used by the Supertrend and zone logic. Supertrend Factor Adjusts the spacing and sensitivity of the Supertrend calculation. Pullback Lookback Defines the local structure window used during pullback evaluation. Stabilization Bars After Flip Helps reduce the weight of very early post-flip behavior. Recovery Window Defines how long the script should monitor post-touch recovery behavior. Touch Zone Size and Max Line Penetration Control how the script defines valid interaction around the Supertrend line. Depth Range Inputs Allow users to define what the script should consider a more optimal pullback depth range. Ready and Confirmed Score Thresholds Allow the strictness of class qualification and alert generation to be tuned. LIMITATIONS AND TRANSPARENCY This script is an analytical classification tool. It does not know future price action, and it does not guarantee continuation after a qualified pullback. Like other trend-following frameworks, Supertrend-based structure can become less reliable during choppy or highly unstable market phases. The inclusion of a noise filter helps address that issue, but it does not remove it. The quality model is also sensitive to volatility, timeframe selection, and the interaction between ATR-based spacing and local structure. A pullback that appears constructive on one timeframe may not behave the same way on another. Users should test settings carefully and interpret results in context. Labels and classes summarize a model output. They are not a substitute for broader chart reading, risk planning, liquidity awareness, or execution discipline. RISK DISCLOSURE This script is provided for technical analysis and chart study only. It does not provide financial, investment, legal, or tax advice. Trading and investing involve risk. Past behavior, structural classification, and indicator output do not guarantee future results. Users are responsible for their own decisions, testing process, and risk management framework.
Pine Script® Indikator
von AGProLabs
1
MTF (MultiTimeFrame) Dashboard PRO + PULLBACKEnglish: A dashboard that provides buy or sell entries when several indicators align across various timeframes. The best entry point is when the Pullback Buy/Pullback Sell signal is triggered, as it anticipates a pullback to the VWAP/EMA level within an uptrend or downtrend. This indicator is designed for scalping on 1-minute charts and in XAU/USD. Recommendation: Open a trade when the "Pullback" signal is triggered, and if the pullback continues and becomes larger, open a second trade, anticipating the correct reversal.
Pine Script® Indikator
von Forkxen
Trend Pullback DetectorDetects high-momentum impulse legs in real time and alerts you the moment they complete — so you're ready when the 50% retracement sets up. How it works The indicator scans for consecutive large bullish or bearish candles that together form a significant directional leg. When a qualifying run ends, it locks in two points: Leg A — the origin of the move (open of the first candle) Leg B — the terminus of the move (high/low of the last candle) From there it plots the 50% midpoint of the leg and watches for price to retrace into that zone. When price pulls back the right amount and begins to recover, it marks the Entry, Stop Loss, and Profit Target directly on the chart. Three alert conditions A/B Bull Leg Detected A/B Bear Leg Detected A/B Bull or Bear Leg Detected Set your preferred alert and get notified the moment a leg completes — giving you time to watch for the retracement before the next move begins. Key settings Min Consecutive Candles — how many qualifying candles define a leg Min Candle Size — filters out small or indecisive candles within the run Min Total Leg Size — ensures the full move is significant relative to current volatility (ATR-based) Retrace Zone — the pullback depth range that qualifies as a valid 50% setup (default 38–65%) Works on any market and timeframe. Best used on liquid instruments where momentum legs are clean and decisive — equities, ETFs, futures, crypto.
Pine Script® Indikator
von confidencewindow
Strategic Peak Drawdown MonitorOverview This indicator is a professional-grade tool designed to track price drawdowns from a specific peak. It is particularly effective for identifying "dip-buying" opportunities or "pullbacks" in a trending market by calculating the percentage drop from the highest price reached within a defined period or the current year. Key Features Dual Peak Modes: Choose between a rolling Lookback window or the Year-to-Date (YTD) high to define your reference peak. Visual Target Tracking: A dotted target line clearly marks your entry or monitoring zone (e.g., -10% from peak). Dynamic Alerting: Integrated background shading and status labels provide instant visual feedback when the target is reached. Clean Dashboard: A toggleable UI table displays real-time metrics, including current drawdown percentage and progress toward the target. Calculation Logic Lookback Mode: Uses the ta.highest function over a user-defined number of bars. Year-to-Date Mode: Automatically identifies the highest price since the first trading day of the current year. Target Calculation: Target = Peak Price * (1 - Drop % / 100) How to Use Trend Pullbacks: Set a target (e.g., 5-10%) to catch retracements in a strong uptrend. Market Corrections: Use the YTD mode to monitor how far the market has corrected from its yearly highs. Risk Management: Use the progress percentage in the dashboard to gauge how close the price is to a significant support level based on drawdown. 概要 本インジケーターは、特定の高値（ピーク）からの下落率を追跡するために設計されたプロフェッショナル向けツールです。一定期間の最高値、または年初来高値からの下落率を計算することで、トレンド相場における「押し目買い」のタイミングや「プルバック」の深さを正確に把握することができます。 主な機能 2つのピーク判定モード: 任意の期間（ Lookback ）または、年初からの最高値（ Year-to-Date ）を基準値として選択可能です。 視覚的なターゲット表示: ターゲットライン（例：高値から-10%）を点線で表示し、監視レベルを明確にします。 ダイナミックな通知設定: ターゲット到達時には背景のハイライトとステータスラベルが表示され、即座に状況を判断できます。 クリーンなダッシュボード: 現在の下落率やターゲットへの到達進捗率（%）をリアルタイムで表示するテーブル機能を搭載（表示/非表示の切り替え可能）。 計算ロジック ルックバックモード: 指定された期間内の最高値を ta.highest 関数を使用して算出します。 年初来モード: 当該年の最初の取引日以降の最高値を自動的に追跡します。 ターゲット計算式: ターゲット価格 = 高値 * (1 - 設定下落率 / 100) 活用方法 押し目買いの判断: 強い上昇トレンドにおいて、5〜10%程度の調整を狙う際のエントリー根拠として活用できます。 相場調整の監視: 年初来高値モードを使用することで、市場が年間の最高値からどの程度調整しているかを定量的に分析できます。 リスク管理: ダッシュボードの進捗率を確認することで、心理的な節目やサポートラインへの接近を事前に察知できます。
Pine Script® Indikator
von Harurow
Pullback SAR ProPullback SAR Pro is a trend-following pullback strategy built around the Parabolic SAR indicator. The script detects pullbacks within an established SAR trend and generates re-entry signals when price resumes the trend direction. To improve signal quality and reduce noise, multiple institutional-style filters are included: • VWAP filter to align trades with intraday bias • Volume filter to confirm participation and avoid low-liquidity moves • Session filter to restrict signals to specific trading hours • Signal limits per session and per trend change • Automatic Take-Profit levels plotted directly on the chart This tool is designed for intraday traders seeking structured pullback entries in trending markets such as indices, futures, or liquid stocks. Best used on lower timeframes (1m–15m) during active trading sessions.
Pine Script® Indikator
von szymonsobkowiak
2
Momentum Cycle Sentry [LuxAlgo]The Momentum Cycle Sentry indicator is a comprehensive momentum visualization tool designed to identify trend cycles, measure volatility extremes, and precisely track retracement phases through a unique multi-layered symmetric architecture. 🔶 USAGE The indicator provides a high-fidelity view of market "flow" by mirroring price momentum across a zero line, creating a symmetric "cloud" whose width represents the intensity of the current move. It is primarily used to distinguish between strong trending expansion and temporary pullback cycles. 🔹 Trend Identification Bullish Momentum: The oscillator cloud appears above and below the zero line in a teal (bullish) color. Bearish Momentum: The oscillator cloud appears in a coral (bearish) color. Width: An expanding cloud indicates increasing velocity, while a thinning cloud suggests a squeeze or waning interest. 🔹 Momentum Cycle Tracing One of the core features of this tool is the Neon Path logic. When the indicator detects that momentum is cooling off against the prevailing trend (a retracement cycle): The background cloud and candle colors dim to signify a "resting" phase in the market. A Triple-Layer Glow activates directly on the oscillator's curve, making the retracement segments "light up" in a high-intensity version of the trend color. This glow uses graduated transparency to create a neon-like halo, visualizing the exact path of the pullback as it moves toward the zero line. Cross (X) markers appear on the zero line to provide a horizontal anchor for the duration of the retracement period. 🔹 Extreme Zones The indicator features dynamic Overbought (OB) and Oversold (OS) corridors. When the oscillator enters these shaded gradient zones, the trend cycle is considered overextended. Traders can look for the oscillator to curve back toward the zero line as a sign of potential exhaustion or mean reversion. 🔶 DETAILS 🔹 Layered Oscillator Architecture The script utilizes five distinct layers of Exponential Moving Average (EMA) smoothing applied to a base momentum calculation. This creates a "glow" effect where the inner core reacts to immediate price action while the outer layers represent the broader trend. The symmetric mirroring ensures that the visual weight of the momentum is balanced, making it easier to perceive the total "volume" of the move regardless of direction. 🔹 Dynamic Volatility Corridors Unlike traditional oscillators with fixed levels (e.g., 70/30), the Momentum Cycle Sentry uses standard deviation-based bands that adapt to current market volatility. This ensures that the overbought and oversold thresholds are relevant to the specific asset and timeframe being traded. 🔶 SETTINGS 🔹 Settings Base Length: Sets the lookback period for the underlying momentum calculation. Smoothing: Determines the base EMA smoothing for the multi-layered layers. Magnitude: A multiplier to scale the vertical height of the oscillator. Retracement Sensitivity: Adjusts how quickly the script detects a pullback/retracement cycle on the curve. 🔹 Extreme Zones OB/OS Lookback: The period used for the standard deviation calculation of the volatility bands. Inner Multiplier: Sets the threshold for the start of the OB/OS corridor. Outer Multiplier: Sets the threshold for the outer edge of the OB/OS corridor (historical extreme). 🔹 Visuals Bullish/Bearish Color: Customizes the colors for uptrends and downtrends. Base Transparency: Adjusts the transparency of the layered cloud effect. Color Candles: Toggles the synchronization of price chart candles with the oscillator's momentum state.
Pine Script® Indikator
von LuxAlgo
1
Axis-Pro System | Trend Structure + Fibonacci Pullbacks Axis-Pro System is a comprehensive Trend Following strategy designed to trade high-probability pullbacks. Unlike indicators that merely chase price, this system patiently waits for market structure alignment before seeking an entry. The system is built on the premise of "Quality over Quantity", utilizing volatility and structure filters to avoid choppy markets (ranges) and false breakouts. 🧠 Strategy Logic The system makes decisions based on a strict 4-step hierarchy: Higher Timeframe (HTF) Bias: Analyzes the trend on a higher timeframe to ensure we are trading in the direction of the dominant flow. Structure & BOS (Break of Structure): Identifies clear impulses that break previous highs or lows. Once a BOS is confirmed, the system "arms" the trade and waits. Fibonacci Zone Pullback: It does not chase the breakout. Instead, it waits for a pullback into the "Discount Zone" (Golden Zone, configurable between 0.382 and 0.618) to improve the Risk/Reward ratio. Validation & Trigger: Uses an ATR expansion check to filter out low-volatility periods. Requires candle confirmation and alignment with fast EMAs before pulling the trigger. 🛡️ Risk Management The system incorporates advanced position management using a split execution model (50/50): Dynamic Stop Loss: Automatically calculated using an ATR multiplier or the recent Swing High/Low (whichever offers better protection). TP1 (Take Profit 1): Closes 50% of the position at a fixed R-multiple (e.g., 1.5R) to lock in profit and moves the Stop Loss to Break-Even. TP2 (Runner): The remaining 50% is left to run for higher targets (e.g., 3.0R) or until the trend bends, maximizing gains during strong moves. Trailing Stop: Optional feature to trail price with a fast EMA once the first target is hit. ⚙️ Settings & Features The script is highly customizable for different assets (Crypto, Forex, Indices): Date Range Filter: Includes a date selector to perform precise Backtesting on specific periods (e.g., testing specifically during a Bear Market vs. Bull Market). Auto Trendlines: Automatically draws relevant trendlines for visual support. Quality Filters: Options to toggle the EMA 200 filter and breakout buffers. ⚠️ Disclaimer This strategy is a tool for analysis and backtesting purposes. Past performance does not guarantee future results. It is highly recommended to test the strategy on a Demo account first and adjust parameters according to the volatility of the specific asset being traded. Always use responsible risk management.
Pine Script® Strategie
von Fikiss77
Quality-Controlled Trend StrategyOverview This strategy demonstrates a clean, execution-aware trend framework with fully isolated risk management. Entry conditions and risk logic are intentionally separated so risk parameters can be adjusted without altering signal behavior. All calculations are evaluated on confirmed bars to ensure backtest behavior reflects real-time execution. Design intent Many scripts mix entries and exits in ways that make results fragile or misleading. This strategy focuses on structural clarity by enforcing: confirmed-bar logic only fixed and transparent risk handling consistent indicator calculations one position at a time It is intended as a baseline framework rather than an optimized system. Trading logic (high level) Trend context EMA 50 vs EMA 200 defines directional bias Entry Price alignment with EMA 50 RSI used as a momentum confirmation, not as an overbought/oversold signal Risk management Stop-loss based on ATR Fixed risk–reward structure Risk logic is isolated from entry logic Editing risk without affecting signals All stop-loss and take-profit calculations are handled in a dedicated block. Users can adjust: ATR length stop-loss multiplier risk–reward ratio without modifying entry conditions. This allows controlled experimentation while preserving signal integrity. Usage notes Results vary by market, timeframe, and volatility conditions. This script is provided for testing and educational purposes and should be validated across multiple symbols and forward-tested before use in live environments.
Pine Script® Strategie
von AIScripts
Quality-Controlled Trend Strategy v2 (Expectancy Focused)This script focuses on quality control rather than curve-fitting. No repainting, no intrabar tricks, no fake equity curves. It uses confirmed-bar entries, ATR-based risk, and clean trend logic so backtests reflect what could actually be traded live. If you publish scripts, this is the minimum structure worth sharing. Why this script exists TradingView’s public scripts are flooded with: repainting indicators no stop-loss logic curve-fit entries that collapse live strategies that look good only in hindsight This script is intentionally boring but honest. No repainting. No intrabar tricks. No fake equity curves The goal is quality control, not hype. What this strategy enforces ✔ Confirmed bars only ✔ Single source of truth for indicators ✔ Fixed risk structure ✔ No signal repainting ✔ Clean exits with unique IDs ✔ Works on any liquid market Trading Logic (simple & auditable) Trend filter EMA 50 vs EMA 200 Entry Pullback to EMA 50 RSI confirms momentum (not oversold/overbought) Risk ATR-based stop Fixed R:R One position at a time This is the minimum bar for a strategy to be considered publish-worthy. Why this helps TradingView quality Most low-value scripts fail because they: hide repainting logic skip exits entirely use inconsistent calculations rely on hindsight candles This strategy forces discipline: every signal is confirmed every trade has defined risk behavior is repeatable across symbols & timeframes If more scripts followed this baseline, TradingView’s public library would be far more usable.
Pine Script® Strategie
von AIScripts
Golden Zone Structure [Kodexius]Golden Zone Structure is a ZigZag based market structure and Fibonacci tool designed to make swing context easier to read directly on the price chart. It detects meaningful pivot highs and lows, labels the evolving structure (HH, HL, LH, LL, including equal highs and lows), and automatically projects a Fibonacci map across the most recent completed swing. Instead of forcing you to manually anchor Fib tools after every new leg, the script rebuilds levels each time a fresh pivot is confirmed. This makes it well suited for traders who focus on swing continuation, pullback depth, and reaction zones where liquidity and orderflow often concentrate. A key emphasis is the Golden Zone highlight. The indicator shades the zone that is most relevant to the current swing context so you can quickly spot where a retracement is approaching a higher probability reaction area, without cluttering the chart with too many permanent objects. The tool is intentionally visual and configurable. You can choose pivot source (High/Low or Close), adjust swing sensitivity via ZigZag period, switch color themes, and decide how much detail you want on screen (levels, zigzag lines, labels). Optional trading markers can be enabled for users who want a lightweight “zone interaction” prompt. These markers are not intended as a standalone trading system. They are meant to complement your own confirmation rules (structure alignment, volume, higher timeframe bias, or price action triggers). 🔹Features 🔸 ZigZag Swing Engine - Uses a configurable ZigZag period to filter noise and confirm swing points only when the lookback logic validates the move. Supports different pivot sources (High/Low or Close) so you can choose between cleaner structure or more reactive behavior depending on the instrument. Optional ZigZag leg drawing to visualize swing flow without clutter. 🔸 Market Structure Labels (HH, HL, LH, LL + Equals) - Automatically labels each confirmed pivot based on how it compares to the prior pivot of the same type. High side classification: H, HH, LH, EH. Low side classification: L, HL, LL, EL. Equal highs and lows help reveal potential liquidity pools and “magnet” areas where price often reacts or breaks with intent. 🔸 Auto Fibonacci Map on the Active Swing - Rebuilds Fibonacci levels every time a new pivot is confirmed, keeping the projection aligned with the most recent completed leg. Core retracement levels: 0.236, 0.382, 0.500, 0.618, 0.786. Extension levels: 1.272 and 1.618 for expansion targeting and continuation mapping. Optional price labels on each level, formatted to tick size so levels remain readable across markets. 🔸 Golden Zone Highlighting (Context Aware) - Highlights the most relevant retracement band with a soft fill so you can spot “zone approach” moments at a glance. The zone selection adapts to swing context, focusing on a different retracement region depending on whether the last confirmed pivot is a peak or a trough. Adjustable transparency keeps the chart clean while preserving the key reaction area. 🔸 Visual Customization + Themes - Multiple color themes (Neon, Ocean, Sunset, Monochrome) so the tool fits different chart styles and backgrounds. Independent toggles for Fib levels, Golden Zone shading, ZigZag lines, and price labels. Line width controls for better scaling across timeframes. 🔸 Optional Trading Markers + Alerts - Optional BUY and SELL labels based on zone interaction logic with candle confirmation filters. ATR based placement offset scaled by sensitivity so labels stay visually separated during volatility. Built in alert conditions for new pivot highs and new pivot lows so you can monitor structure changes without watching every bar. ▶ Practical Usage Tip • Use structure labels to define bias (HH + HL for bullish structure, LH + LL for bearish structure). • Use the Golden Zone as a location filter, then wait for your own trigger (break of minor structure, rejection candle, volume shift, etc.). • Treat extensions as “map points” not guaranteed targets. They work best when structure supports continuation.
Pine Script® Indikator
von UnknownUnicorn113699460
3
Retracement Strategy [OmegaTools]Retracement Strategy is a systematic trend–retracement framework designed to identify directional opportunities after a confirmed momentum shift, and to manage exits using either trend reversals or overextension conditions. It is built around a smoothed RSI regime filter and a simple, price-based retracement trigger, making it applicable across a wide range of markets and timeframes while remaining transparent and easy to interpret. The strategy begins by defining the underlying trend through a two-stage RSI signal. A standard RSI is computed over the user-defined Length input, then smoothed with a short moving average to reduce noise. Two symmetric thresholds are derived from the Threshold parameter: an upper band at 100 minus the threshold and a lower band at the threshold itself. When the smoothed RSI crosses above the upper band, the environment is classified as bullish and the internal trend state is set to uptrend. When the smoothed RSI crosses below the lower band, the environment is classified as bearish and the trend state becomes downtrend. When RSI moves back into the central zone between the two bands, the trend is considered neutral. In addition to the current trend, the strategy tracks the last non-neutral trend direction, which is used to detect genuine trend changes rather than transient oscillations. Once a trend is established, the strategy looks for retracement entries in the direction of that trend. For long setups in an uptrend, it computes the lowest low over the previous Length minus one bars, excluding the current bar. A long signal is generated when price dips below this recent low while the trend state remains bullish. Symmetrically, for short setups in a downtrend, it computes the highest high over the previous Length minus one bars and enters short when price spikes above this recent high while the trend state remains bearish. This logic is designed to capture pullbacks against the prevailing RSI-defined trend, entering when the market tests or slightly violates recent extremes, rather than chasing breakouts. The candles are visually coloured to reflect the detected trend, highlighting bullish and bearish environments while keeping neutral phases distinguishable on the chart. An ATR-based measure is used solely to position the “UP” and “DN” labels on the chart for clearer visualisation of entry points; it does not directly influence position sizing or stop calculation in this implementation. Take profit and stop loss behaviour are fully parameterized through the “Take Profit” and “Stop Loss” inputs, each offering three modes: None, Trend Change and Extension. When “Trend Change” is selected for the take profit, the strategy will only exit profitable positions when a confirmed trend reversal occurs. For a long position, this means that the strategy will close the trade when the trend state flips from uptrend to downtrend, and the last recorded trend direction validates that this is a genuine reversal rather than a neutral fluctuation; the same logic applies symmetrically for short positions. When “Extension” is selected as the take profit mode, the strategy closes profitable long trades when the smoothed RSI reaches or exceeds the upper threshold, interpreted as an overbought extension within the bullish regime, and closes profitable short trades when the smoothed RSI falls to or below the lower threshold, interpreted as an oversold extension within the bearish regime. When “None” is chosen, the strategy does not apply any explicit take profit logic, leaving trades to be managed by the stop loss settings or by user discretion in backtesting. The stop loss parameter works in a parallel way. With “Trend Change” selected as stop loss, any open long position is closed when the trend flips from uptrend to downtrend, regardless of whether the trade is currently in profit or loss, and any open short is closed when the trend flips from downtrend to uptrend. This turns the RSI trend regime into a hard invalidation rule: once the underlying momentum structure reverses, the position is exited. With “Extension” selected for stop loss, long positions are closed when RSI falls back below the upper band and moves towards the opposite side of the range, while short positions are closed when RSI rises above the lower band and moves towards the upper side. In practice, this acts as a dynamic exit based on the oscillator moving out of a favourable context for the existing trade. Selecting “None” for stop loss disables these automatic exits, leaving only the take profit logic, if any, to manage the position. Because take profit and stop loss configuration are independent, the user can construct different profiles, such as pure trend-change exits on both sides, pure overextension exits, or a mix (for example, take profit on overextension and stop loss on trend reversal). This strategy is designed as an analytical and backtesting framework rather than a finished plug-and-play trading system. It does not include position sizing, risk-per-trade controls, multi-timeframe confirmation, volatility filters or instrument-specific fine-tuning. Its primary purpose is to provide a clear, rule-based structure for testing retracement logic within RSI-defined trends, and to allow users to explore how different exit regimes (trend-change based versus extension based) affect performance on their instruments and timeframes of interest. Nothing in this script or its description should be interpreted as financial advice, investment recommendation or solicitation to buy or sell any financial instrument. Past performance on backtests does not guarantee future results. The behaviour of this strategy can vary significantly across symbols, timeframes and market conditions, and correlations, volatility and liquidity can change without warning. Before considering any live application, users should thoroughly backtest and forward test the strategy on their own data, adjust parameters to their risk profile and instrument characteristics, and integrate proper money management and trade management rules. Use of this script is entirely at the user’s own risk.
Pine Script® Strategie
von OmegaTools
9/15 EMA Scalper 9/15 EMA Scalper — by uzairbaloch This script is a price-action based scalping system built around the 9 EMA and 15 EMA trend structure. It identifies short-term reversal points where the market pulls back into the EMAs and confirms direction with a strong candle signal. The strategy looks for: • A clear EMA trend (9 above 15 for buys, 9 below 15 for sells) • Pullback into EMA9/EMA15 with candle bodies touching the fast EMA • Strong confirmation candle (engulfing / strong momentum / controlled wick) • Optional slope filter to avoid flat, choppy sessions • Automatic trade labels showing Entry, SL and TP (based on R:R) The script is designed for scalping on gold, indices, and high-volatility FX pairs. It resets trade logic immediately after SL or TP is hit, so it can catch the next valid signal without delay. This tool is meant as an indicator — not a full strategy — and can be used to visually mark high-probability EMA pullback setups with precise levels. Author: uzairbaloch
Pine Script® Indikator
von uzairblaoch
7
Breakouts & Pullbacks [Trendoscope®]🎲 Breakouts & Pullbacks - All-Time High Breakout Analyzer Probability-Based Post-Breakout Behavior Statistics | Real-Time Pullback & Runup Tracker A professional-grade Pine Script v6 indicator designed specifically for analyzing the historical and real-time behavior of price after strong All-Time High (ATH) breakouts. It automatically detects significant ATH breakouts (with configurable minimum gap), measures the depth and duration of pullbacks, the speed of recovery, and the subsequent run-up strength — then turns all this data into easy-to-read statistical probabilities and percentile ranks. Perfect for swing traders, breakout traders, and anyone who wants objective, data-driven insight into questions like: “How deep do pullbacks usually get after a strong ATH breakout?” “How many bars does it typically take to recover the breakout level?” “What is the median run-up after recovery?” “Where is the current pullback or run-up relative to historical ones?” 🎲 Core Concept & Methodology Indicator is more suitable for indices or index ETFs that generally trade in all-time highs however subjected to regular pullbacks, recovery and runups. For every qualified ATH breakout, the script identifies 4 distinct phases: Breakout Point – The exact bar where price closes above the previous ATH after at least Minimum Gap bars. Pullback Phase – From breakout candle high → lowest low before price recovers back above the breakout level. Recovery Phase – From the pullback low → the bar where price first trades back above the original breakout price. Post-Recovery Run-up Phase – From the recovery point → current price (or highest high achieved so far). Each completed cycle is stored permanently and used to build a growing statistical database unique to the loaded chart and timeframe. 🎲 Visual Elements Yellow polyline triangle connecting Previous ATH / Pullback point(start), New ATH Breakout point (end), Recovery point (lowest pullback price), and extends to recent ATH price. Small green label at the pullback low showing detailed tooltip on hover with all measured values Clean, color-coded statistics table in the top-right corner (visible only on the last bar) Powerful Statistics Table – The Heart of the Indicator The table constantly compares the current situation against all past qualified breakouts and shows details about pullbacks, and runups that help us calculate the probability of next pullback, recovery or runup. 🎲 Settings & Inputs Minimum Gap The minimum number of bars that must pass between breaking a new ATH and the previous one. Higher values = stricter filter → only the strongest, cleanest breakouts are counted. Lower values = more data points (useful on lower timeframes or very trending instruments). Recommendation: Daily charts: 30–50 4H charts: 40–80 1H charts: 100–200 🎲 How to Use It in Practice This indicator helps investors to understand when to be bullish, bearish or cautious and anticipate regular pullbacks, recovery of markets using quantitative methods. The indicator does not generate buy/sell signals. However, helps traders set expectations and anticipate market movements based on past behavior.
Pine Script® Indikator
von Trendoscope
12
HTF MACD Dual Zero Cross + First EMA PullbackThis script aims to get the trader on the right side of the momentum and get better entries by only alerting when price pulls back to the trader's specified EMA. This script isnt meant to catch tops or bottoms but to trade with the momentum once it starts. This script will alert whe nthe MACD and signal line both cross the zero line, after that the script waits for price to make a pullback and then alet either a sell or buy. Ive found this works best when you trade with the trend on a higher timeframe. You can use whatever MACD settings you prefer and really customize this to the asset youre trading. You can also change whether you get an alert based on a wick touch of the EMA or a candle close.
Pine Script® Indikator
von skylinegtr2789
Advanced Trading System - [WOLONG X DBG]Advanced Multi-Timeframe Trading System Overview This technical analysis indicator combines multiple established methodologies to provide traders with market insights across various timeframes. The system integrates SuperTrend analysis, moving average clouds, MACD-based candle coloring, RSI analysis, and multi-timeframe trend detection to suggest potential entry and exit opportunities for both swing and day trading approaches. Methodology The indicator employs a multi-layered analytical approach based on established technical analysis principles: Core Signal Generation SuperTrend Engine: Utilizes adaptive SuperTrend calculations with customizable sensitivity (1-20) combined with SMA confirmation filters to identify potential trend changes and continuations Braid Filter System: Implements moving average filtering using multiple MA types (McGinley Dynamic, EMA, DEMA, TEMA, Hull, Jurik, FRAMA) with percentage-based strength filtering to help reduce false signals Multi-Timeframe Analysis: Analyzes trend conditions across 10 different timeframes (1-minute to Daily) using EMA-based trend detection for broader market context Advanced Features MACD Candle Coloring: Applies dynamic 4-level candle coloring system based on MACD histogram momentum and signal line relationships for visual trend strength assessment RSI Analysis: Identifies potential reversal areas using RSI oversold/overbought conditions with SuperTrend confirmation Take Profit Analysis: Features dual-mode TP detection using statistical slope analysis and Parabolic SAR integration for exit timing analysis Key Components Signal Types Primary Signals: Green ▲ for potential long entries, Red ▼ for potential short entries with trend and SMA alignment Reversal Signals: Small circular indicators for RSI-based counter-trend possibilities Take Profit Markers: X-cross symbols indicating statistical TP analysis zones Pullback Signals: Purple arrows for potential trend continuation entries using Parabolic SAR Visual Elements 8-Layer MA Cloud: Customizable moving average cloud system with 3 color themes for trend visualization Real-Time Dashboard: Multi-timeframe trend analysis table showing bullish/bearish status across all timeframes Dynamic Candle Colors: 4-intensity MACD-based coloring system (ranging from light to strong trend colors) Entry/SL/TP Labels: Automatic calculation and display of suggested entry points, stop losses, and multiple take profit levels Usage Instructions Basic Configuration Sensitivity Setting: Start with default value 6 Increase (7-15) for more frequent signals in volatile markets Decrease (3-5) for higher quality signals in trending markets MA Filter Type: McGinley Dynamic recommended for smoother signals Filter Strength: Set to 80% for balanced filtering, adjust based on market conditions Signal Interpretation Long Entry: Green ▲ suggests when price crosses above SuperTrend with bullish SMA alignment Short Entry: Red ▼ suggests when price crosses below SuperTrend with bearish SMA alignment Reversal Opportunities: Small circles indicate RSI-based counter-trend analysis Take Profit Zones: X-crosses mark statistical TP areas based on slope analysis Dashboard Analysis Green Cells: Bullish trend detected on that timeframe Red Cells: Bearish trend detected on that timeframe Multi-Timeframe Confluence: Look for alignment across multiple timeframes for stronger signal confirmation Risk Management Features Automatic Calculations ATR-Based Stop Loss: Dynamic stop loss calculation using ATR multiplier (default 1.9x) Multiple Take Profit Levels: Three TP targets with 1:1, 1:2, and 1:3 risk-reward ratios Position Sizing Guidance: Entry labels display suggested price levels for order placement Confirmation Requirements Trend Alignment: Requires SuperTrend and SMA confirmation before signal generation Filter Validation: Braid filter must show sufficient strength before signals activate Multi-Timeframe Context: Dashboard provides broader market context for decision making Optimal Settings Timeframe Recommendations Scalping: 1M-5M charts with sensitivity 8-12 Day Trading: 15M-1H charts with sensitivity 6-8 Swing Trading: 4H-Daily charts with sensitivity 4-6 Market Conditions Trending Markets: Reduce sensitivity, increase filter strength Ranging Markets: Increase sensitivity, enable reversal signals High Volatility: Adjust ATR risk factor to 2.0-2.5 Advanced Features Customization Options MA Cloud Periods: 8 customizable periods for cloud layers (default: 2,6,11,18,21,24,28,34) Color Themes: Three professional color schemes plus transparent option Dashboard Position: 9 positioning options with 4 size settings Signal Filtering: Individual toggle controls for each signal type Technical Specifications Moving Average Types: 21 different MA calculations including advanced types (Jurik, FRAMA, VIDA, CMA) Pullback Detection: Parabolic SAR with customizable start, increment, and maximum values Statistical Analysis: Linear regression slope calculation for trend-based TP analysis Important Limitations Lagging Nature: Some signals may appear after potential entry points due to confirmation requirements Ranging Markets: May produce false signals during extended sideways price action High Volatility: Requires parameter adjustment during news events or unusual market conditions Computational Load: Multiple timeframe analysis may impact performance on slower devices No Guarantee: All signals are suggestions based on technical analysis and may be incorrect Educational Disclaimers This indicator is designed for educational and analytical purposes only. It represents a technical analysis tool based on mathematical calculations of historical price data and should not be considered as financial advice or trading recommendations. Risk Warning: Trading involves substantial risk of loss and is not suitable for all investors. Past performance of any trading system or methodology is not necessarily indicative of future results. The high degree of leverage can work against you as well as for you. Important Notes: Always conduct your own analysis before making trading decisions Use appropriate position sizing and risk management strategies Never risk more than you can afford to lose Consider your investment objectives, experience level, and risk tolerance Seek advice from qualified financial professionals when needed Performance Disclaimer: Backtesting results do not guarantee future performance. Market conditions change constantly, and what worked in the past may not work in the future. Always paper trade new strategies before risking real capital.
Pine Script® Indikator
von ionmarpie
8
Anrazzi - EMAs/ATR - 1.0.2The Anrazzi – EMAs/ATR indicator is a multi-purpose overlay designed to help traders track trend direction and market volatility in a single clean tool. It plots up to six customizable moving averages (MAs) and an Average True Range (ATR) value directly on your chart, allowing you to quickly identify market bias, dynamic support/resistance, and volatility levels without switching indicators. This script is ideal for traders who want a simple, configurable, and efficient way to combine trend-following signals with volatility-based position sizing. 📌 Key Features Six Moving Averages (MA1 → MA6) Toggle each MA on/off individually Choose between EMA or SMA for each Customize length and color Perfect for spotting trend direction and pullback zones ATR Display Uses Wilder’s ATR formula (ta.rma(ta.tr(true), 14)) Can be calculated on current or higher timeframe Adjustable multiplier for position sizing (e.g., 1.5× ATR stops) Displays cleanly in the bottom-right corner Custom Watermark Displays symbol + timeframe in top-right Adjustable color and size for streamers, screenshots, or clear charting Compact UI Organized with group and inline inputs for quick configuration Lightweight and optimized for real-time performance ⚙️ How It Works MAs: The script uses either ta.ema() or ta.sma() to compute each moving average based on the user-selected type and length. ATR: The ATR is calculated using ta.rma(ta.tr(true), 14) (Wilder’s smoothing), and optionally scaled by a multiplier for easier use in risk management. Tables: ATR value and watermark are displayed using table.new() so they stay anchored to the screen regardless of zoom level. 📈 How to Use Enable the MAs you want to track and adjust their lengths, type, and colors. Enable ATR if you want to see volatility — optionally select a higher timeframe for broader context. Use MAs to: Identify overall trend direction (e.g. price above MA20 = bullish) Spot pullback zones for entries See when multiple MAs cluster together as support/resistance zones Use ATR value to: Size your stop-loss dynamically (e.g. stop = entry − 1.5×ATR) Detect volatility breakouts (ATR spikes = market expansion) 🎯 Recommended For Day traders & swing traders Trend-following & momentum strategies Volatility-based risk management Traders who want a clean, all-in-one dashboard
Pine Script® Indikator
von Anrazzi
EdgeFlow Pullback [CHE]EdgeFlow Pullback \ — Icon & Visual Guide (Deep Dive) TL;DR (1-minute read) ⏳ Hourglass = Pending verdict. A countdown runs from the signal bar until your Evaluation Window ends. ✔ Checkmark (green) = OK. After the evaluation window, price (HLC3) is on the correct side of the EMA144 for that signal’s direction. ✖ Cross (red) = Fail. After the evaluation window, price (HLC3) is on the wrong side of the EMA144. ▲ / ▼ Triangles = the actual PB Long/Short signal bar (sequence completed in time). Small lime/red crosses = visual markers when HLC3 crosses EMA144 (context, not trade signals). Orange line = EMA144 (baseline/trend filter). T3 line color = Context signal: green when T3 is below HLC3, red when T3 is above HLC3. Icon Glossary (What each symbol means) 1) ⏳ Hourglass — “Pending / Countdown” Appears immediately when a PB signal fires (Long or Short). Shows `⏳ currentBars / EvaluationBars` (e.g., `⏳ 7/30`). The label stays anchored at the signal bar and its original price level (it does not drift with price). During ⏳ you get no verdict yet. It’s simply the waiting period before grading. 2) ✔ Checkmark (green) — “Condition met” Appears after the Evaluation Window completes. Logic: Long signal: HLC3 (typical price) is above EMA144 → ✔ Short signal: HLC3 is below EMA144 → ✔ The label turns green and text says “✔ … Condition met”. This is rules-based grading, not PnL. It tells you if the post-signal structure behaved as expected. 3) ✖ Cross (red) — “Condition failed” Appears after the Evaluation Window completes if the condition above is not met. Label turns red with “✖ … Condition failed”. Again: rules-based verdict, not a guarantee of profit or loss. 4) ▲ “PB Long” triangle (below bar) Marks the exact bar where the 4-step Long sequence completed within the allowed window. That bar is your signal bar for Long setups. 5) ▼ “PB Short” triangle (above bar, red) Same as above, for Short setups. 6) Lime/Red “+” crosses (tiny cross markers) Lime cross (below bar): HLC3 crosses above EMA144 (crossover). Red cross (above bar): HLC3 crosses below EMA144 (crossunder). These crosses are context markers; they’re not entry signals by themselves. The Two Clocks (Don’t mix them up) There are two different time windows at play: 1. Signal Window — “Max bars for full sequence” A pullback signal (Long or Short) only fires if the 4-step sequence completes within this many bars. If it takes too long: reset (no signal, no triangle, no label). Purpose: avoid stale setups. 2. Evaluation Window — “Evaluation window after signal (bars)” Starts after the signal bar. The label shows an ⏳ countdown. When it reaches the set number of bars, the indicator checks whether HLC3 is on the correct side of EMA144 for the signal direction. Then it stamps the signal with ✔ (OK) or ✖ (Fail). Timeline sketch (Long example): ``` → ▲ PB Long at bar t0 Label shows: ⏳ 0/EvalBars t0+1, t0+2, ... t0+EvalBars-1 → still ⏳ At t0+EvalBars → Check HLC3 vs EMA144 Result → ✔ (green) or ✖ (red) (Label remains anchored at t0 / signal price) ``` What Triggers the PB Signal (so you know why triangles appear) LONG sequence (4 steps in order): 1. T3 falling (the pullback begins) 2. HLC3 crosses under EMA144 3. T3 rising (pullback ends) 4. HLC3 crosses over EMA144 → PB Long triangle SHORT sequence (mirror): 1. T3 rising 2. HLC3 crosses over EMA144 3. T3 falling 4. HLC3 crosses under EMA144 → PB Short triangle If steps 1→4 don’t complete in time (within Max bars for full sequence), the sequence is abandoned (no signal). Lines & Colors (quick interpretation) EMA144 (orange): your baseline trend filter. T3 (green/red): Green when T3 < HLC3 (price above the smoothed path; often supportive in up-moves) Red when T3 > HLC3 (price below the smoothed path; often pressure in down-moves) HLC3 (gray): the typical price the logic uses ( (H+L+C)/3 ). Label Behavior (anchoring & cleanup) Each signal creates one label at the signal bar with ⏳. The label is position-locked: it stays at the same bar index and y-price it was born at. After the evaluation check, the label text and color update to ✔/✖, but position stays fixed. The indicator keeps only the last N labels (your “Show only the last N labels” input). Older ones are deleted to reduce clutter. What You Can (and Can’t) Infer from ✔ / ✖ ✔ OK: Structure behaved as intended during the evaluation window (HLC3 finished on the correct side of EMA144). Inference: The pullback continued in the expected direction post-signal. ✖ Fail: Structure ended up opposite the expectation. Inference: The pullback did not continue cleanly (chop, reversal, or insufficient follow-through). > Important: ✔/✖ is not profit or loss. It’s an objective rule check. Use it to identify market regimes where your entries perform best. Input Settings — How they change the visuals T3 length: Shorter → faster turns, more signals (and more noise). Longer → smoother turns, fewer but cleaner sequences. T3 volume factor (0–1, default 0.7): Higher → more curvature/smoothing. Typical sweet spot: 0.5–0.9. EMA length (baseline) default 144: Smaller → faster baseline, more cross events, more aggressive signals. Larger → slower, stricter trend confirmation. Max bars for full sequence (signal window): Smaller → only fresh, snappy pullbacks can signal. Larger → allows slower pullbacks to complete. Evaluation window (after signal): Smaller → verdict arrives quickly (less tolerance). Larger → gives the trade more time to prove itself structurally. Show only the last N labels: Controls chart clutter. Increase for more history, decrease for focus. (FYI: The “Debug” toggle exists but doesn’t draw extra overlays in this version.) Practical Reading Flow (how to use visuals in seconds) 1. Triangles catch your eye: ▲ for Long, ▼ for Short. That’s the setup completion. 2. ⏳ label starts—don’t judge yet; let the evaluation run. 3. Watch EMA slope and T3 color for context (trend + pressure). 4. After the window: ✔/✖ stamps the outcome. Log what the market was like when you got ✔. Common “Why did…?” Questions Q: Why did I get no triangle even though T3 turned and EMA crossed? A: The 4 steps must happen in order and within the Signal Window. If timing breaks, the sequence resets. Q: Why did my label stay ⏳ for so long? A: That’s by design until the Evaluation Window completes. The verdict only happens at the end of that window. Q: Why is ✔/✖ different from my PnL? A: It’s a structure check, not a profit check. It doesn’t know your entries/exits/stops. Q: Do the small lime/red crosses mean buy/sell? A: No. They’re context markers for HLC3↔EMA crosses, useful inside the sequence but not standalone signals. Pro Tips (turn visuals into decisions) Entry: Use the ▲/▼ triangle as your trigger, in trend direction (check EMA slope/market structure). Stop: Behind the pullback swing around the signal bar. Exit: Structure levels, R-multiples, or a reverse HLC3↔EMA cross as a trailing logic. Tuning: Intraday/volatile: shorter T3/EMA + tighter Signal Window. Swing/slow: default 144 EMA + moderate windows. Learn quickly: Filter your chart to show only ✔ or only ✖ windows in your notes; see which sessions, assets, and volatility regimes suit the system. Disclaimer No indicator guarantees profits. Sweep2Trade Pro \ is a decision aid; always combine with solid risk management and your own judgment. Backtest, forward test, and size responsibly. The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Enhance your trading precision and confidence 🚀 Happy trading Chervolino
Pine Script® Indikator
von chervolino
Script_Algo - Fibo Correction Strategy🔹 Core Concept The strategy is built on combining Fibonacci retracement levels, candlestick pattern confirmation, and trend filtering for trade selection. It performs well on the 1-hour timeframe across many cryptocurrency pairs. Particularly on LINKUSDT over the past year and a half, despite the not very optimal 1:1 risk/reward ratio. The logic is simple: after a strong impulse move, the price often retraces to key Fibonacci levels (specifically, the 61.8% level). If a confirming candlestick (pattern) appears at this moment, the strategy looks for an entry in the direction of the main trend. 🔹 Indicators Used in the Strategy ATR (Average True Range) — Used to calculate the stop-loss and take-profit levels. EMA (9 and 21) — Additional moving averages for assessing the direction of movement (not directly used in entry conditions, but the logic can be expanded to include them). SMA (Trend Filter, 20 by default) — The trend direction filter. Trades are only opened in its direction. Fibonacci Levels — The 61.8% retracement level is calculated based on the high and low of the previous candle. 🔹 Entry Conditions 🟢 Long (Buy): Previous Candle: Must be green (close higher than open). Must have a body not smaller than a specified minimum. The upper wick must not exceed 30% of the body size. → This filters out "weak" or "indecisive" candles. Current Candle: Price touches or breaches the Fibonacci 61.8% retracement level from the previous range. Closes above this level. Closes above the Trend Filter (SMA) line. A position is opened only if there are no other open trades at the moment. 🔴 Short (Sell): Previous Candle: Must be red (close lower than open). Must have a body not smaller than a specified minimum. The lower wick must not exceed 30% of the body size. Current Candle: Price touches or breaches the Fibonacci 61.8% retracement level from the previous range. Closes below this level. Closes below the Trend Filter (SMA) line. A trade is opened only if there are no other open positions. 🔹 Risk Management Stop-Loss = ATR × multiplier (default is 5). Take-Profit = ATR × the same multiplier. Thus, the default risk/reward ratio is 1:1, but it can be easily adjusted by changing the coefficient. Although, strangely enough, this ratio has shown the best results on some assets on the 1-hour timeframe. 🔹 Chart Visualization Fibonacci level for Long — Green line with circles. Fibonacci level for Short — Red line with circles. Trend Filter line (SMA) — Blue. 🔹 Strengths of the Strategy ✅ Utilizes a proven market pattern — retracement to the 61.8% level. ✅ Further filters entries using trend and candlestick patterns. ✅ Simple, transparent logic that is easy to expand (e.g., adding other Fib levels, an EMA filter, etc.). 🔹 Limitations ⚠️ Performs better in trending markets; can generate false signals during ranging (sideways) conditions. ⚠️ The fixed 1:1 risk/reward ratio is not always optimal and could be refined. ⚠️ Performance depends on the selected timeframe and ATR parameters. 📌 Summary: The strategy seeks corrective entries in the direction of the trend, confirmed by candlestick patterns. It is versatile and can be applied to forex pairs, cryptocurrencies, and stocks. ⚠️ Not financial advice. Pay close attention to risk management to avoid blowing your account. The strategy is not repainting — I have personally verified it through real testing — but it may not necessarily replicate the same results in the future, as the market is constantly changing. Test it, profit, and good luck to everyone!
Pine Script® Strategie
von Script_Algo
2
Golden Ratio Trend Persistence [EWT]Golden Ratio Trend Persistence ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Overview The Golden Ratio Trend Persistence is a dynamic tool designed to identify the strength and persistence of market trends. It operates on a simple yet powerful premise: a trend is likely to continue as long as it doesn't retrace beyond the key Fibonacci golden ratio of 61.8%. This indicator automatically identifies the most significant swing high or low and plots a single, dynamic line representing the 61.8% retracement level of the current move. This line acts as a "line in the sand" for the prevailing trend. The background color also changes to provide an immediate visual cue of the current market direction. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The Power of the Golden Ratio (61.8%) The golden ratio (ϕ≈1.618) and its inverse (0.618, or 61.8%) are fundamental mathematical constants that appear throughout nature, art, and science, often representing harmony and structure. In financial markets, this ratio is a cornerstone of Fibonacci analysis and is considered one of the most critical levels for price retracements. Market movements are not linear; they progress in waves of impulse and correction. The 61.8% level often acts as the ultimate point of support or resistance. A trend that can hold this level demonstrates underlying strength and is likely to persist. A breach of this level, however, suggests a fundamental shift in market sentiment and a potential reversal. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ How to Use This Indicator This indicator is designed for clarity and ease of use. Identifying the Trend : The visual cues make the current trend instantly recognizable. A teal line with a teal background signifies a bullish trend. The line acts as dynamic support. A maroon line with a maroon background signifies a bearish trend. The line acts as dynamic resistance. Confirming Trend Persistence : As long as the price respects the plotted level, the trend is considered intact. In an uptrend, prices should remain above the teal line. The indicator will automatically adjust its anchor to new, higher lows, causing the support line to trail the price. In a downtrend, prices should remain below the maroon line. Spotting Trend Reversals : The primary signal is a trend reversal, which occurs when the price closes decisively beyond the plotted level. Potential Sell Signal : When the price closes below the teal support line, it indicates that buying pressure has failed, and the uptrend is likely over. Potential Buy Signal : When the price closes above the maroon resistance line, it indicates that selling pressure has subsided, and a new uptrend may be starting. Think of this tool as an intelligent, adaptive trailing stop that is based on market structure and the time-tested principles of Fibonacci analysis. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Input Parameters You can customize the indicator's sensitivity through the following inputs in the settings menu: Pivot Lookback Left : This number defines how many bars to the left of a candle must be lower (for a pivot high) or higher (for a pivot low) to identify a potential swing point. A higher value will result in fewer, but more significant, pivots being detected. Pivot Lookback Right : This defines the number of bars that must close to the right before a swing point is confirmed. This parameter prevents the indicator from repainting. A higher value increases confirmation strength but also adds a slight lag. Fibonacci Ratio : While the default is the golden ratio (0.618), you can adjust this to other key Fibonacci levels, such as 0.5 (50%) or 0.382 (38.2%), to test for different levels of trend persistence. Adjusting these parameters allows you to fine-tune the indicator for different assets, timeframes, and trading styles, from short-term scalping to long-term trend following.
Pine Script® Indikator
von YetAnotherTA
2
Al Brooks Second Entry**\ Al Brooks Second Entry Indicator\ ** This custom indicator helps identify second-entry setups based on Al Brooks' price action principles. The script marks key levels in trending markets, indicating potential long and short entries. It displays the first and second entry signals (H1, H2, L1, L2) as well as relevant pullback zones for added clarity. \ Features:\ \ \ \ First Entry Signals\ : H1 (Long) and L1 (Short) are marked when a trend begins to form. \ \ Second Entry Signals\ : H2 (Long) and L2 (Short) are plotted once the market pulls back and continues in the direction of the trend. \ \ EMA Filter\ : An Exponential Moving Average (EMA) is included to filter trades in the direction of the trend (longs above EMA, shorts below EMA). \ \ Pullback Zones\ : Highlighted areas to assist in identifying optimal zones for entry. \ \ Adjustable Label Sizes\ : Customize the appearance of the entry labels (tiny or small). \ \ Inputs:\ \ \ \ Show First/Second Entry\ : Control whether the first (H1, L1) and second (H2, L2) entry signals are displayed. \ \ EMA Length\ : Set the length of the EMA to use for trend direction. \ \ Label Size\ : Choose between tiny and small label sizes for clear chart visibility. \ \ Pullback Zones\ : Toggle the highlighting of pullback zones. \ \ How it Works:\ \ \ The indicator detects a trend direction using price action (new highs/lows, inside/outside bars). \ Once a trend is identified, it waits for a pullback and marks the first and second entry points (H1, H2, L1, L2). \ The indicator also plots the EMA to help confirm the overall market bias. \ Pullback zones are drawn to help spot potential areas of support or resistance. \ This script is ideal for traders looking to trade retracements in trending markets, providing clear entry signals and a visual representation of market structure.
Pine Script® Indikator
von PriceActionTrader1
18