Auf geht's

Indikatoren und Strategien

Dual Fibonacci Zone & Ranged Vol DCA Strategy - R3c0nTraderWhat does this do? This is for educational purposes and allows one to backtest two Fibonacci Zones simultaneously. This also includes an option for Ranged Volume as a parameter. Pre-requisites: First off, this is a Long only strategy as I wrote it with DCA in mind. It cannot be used for shorting. Shorting defeats the purpose of a DCA bot which has a goal that is Long a position not Short a position. If you want to short, there are plenty of free scripts out there that do this. You must have some base knowledge or experience with Fibonacci trading, understanding what is ADX, +DI (and -DI), etc. You can use this script without a 3Commas account and see how 3Commas DCA Bot would perform. However, I highly recommend inexperienced uses get a free account and going through the tutorials, FAQ's and knowledgebase. This would give you a base understanding of the settings you will see in this strategy and why you will need to know them. Only then should you try testing this strategy with a paper bot. Background After I had created and released "Fibonacci Zone DCA Strategy", I began expanding and testing other ideas. The first idea was to add Ranged Volume to the Fibonacci Zone DCA strategy which I wanted for providing further confirmation before entering a trade. The second idea was to add a second Fibonacci Zone that was just as configurable as the first Fibonacci Zone. I managed to add both and they can be easily enabled or disabled via the strategy settings menu. Things Got Real Interesting Things got real interesting when I started testing strategies with two Fibonacci zones. Here's a quick list of what I found I was able to do: Mix and match exit strategies. I could set the Fib-1 zone strategy to exit with a take profit % and separately set the Fib-2 zone strategy to exit when the price crosses the top-high fib border Trade the trend. A common phrase amongst traders is "the Trend is your friend" and with the help of an additional Fib Zone, I was able to trade the trend more often by using two different Fib Zone strategies which if configured properly can shorten time to re-deploy capital, increase number of closed trades, and in some cases increase net profit. Trade both bull market uptrends and bear market downtrends in the same strategy. I found I could configure one Fib Zone strategy to be really good in uptrends and another Fib Zone strategy to be really good in downtrends. In some cases, with both Fib Zone strategies enabled together in a single strategy I got better results than if the strategies were backtested separately. There are many other trade strategies I am finding with this. One could be to trade a convergence or divergence of the two different Fib Zones. This could possibly be achieved by setting one strategy to have different Fibonacci length. Credits: Thank you "EvoCrypto" for granting me permission to use "Ranged Volume" to create this strategy Thank you "eykpunter" for granting me permission to use "Fibonacci Zones" to create this strategy Thank you "junyou0424" for granting me permission to use "DCA Bot with SuperTrend Emulator" which I used for adding bot inputs, calculations, and strategy
Pine Script™ Strategie
von R3c0nTrader
9
TheBigBangTraders BreakoutName: TheBigBangTraders Breakout Category: Trend Follower Operating mode: Spot Trades duration: Intraday Timeframe: 1H Suggested usage: the purpose of this strategy is to help to investigate if the asset is sensitive to breakout approach. Entry: Trigger point can be choose by the user between: High of the N days ago High of the N weeks ago Exit: End of Day Usage: ⁃ It can be useful to use this script to test the behaviour of a definite asset ⁃ This is a raw system that can be considered a base to realize a complete breakout strategy Configuration: - N/A Backtesting ⁃ Exchange: BINANCE ⁃ Pair: ETHUSDT ⁃ Timeframe: !H ⁃ Fee 0.075% ⁃ Slippage 0 - Start : 2020-01-03 How you or we can improve? Source code is open so share your ideas!
Pine Script™ Strategie
von TheSocialCryptoClub
BEST Strategy Template w/ Custom SL/TP Size - EducationalHello traders I'm getting this question at least once per week: "how to define a custom exit quantity for my stop loss and a different one for my take profit" Instead of answering every day the same question in my DMs, I've decided to publish an educational strategy template script using this Features - Select to use or not the SL and/or TP - Define how many pips/USD the SL/TP should be set at from the entry - Define what quantity percentage you want to close at SL and/or at TP (lines 301 to 320 in the code) - Classical custom trailing stop where the SL is moved to breakeven once the TP is hit - Get real-time backtesting stats based on the options you've selected Update You might not know it yet but from last week (or maybe the week before), the qty/qty_percent from the strategy.exit function refers now to the initial position size (and not the remaining position size like before) For example: strategy.exit("EX1", qty_percent = 50, stop = constant) strategy.exit("EX2", qty_percent = 20, stop = constant) What happened before After "EX1" reaches SL levels, "EX2" exits 20% from the % of the remaining position size. If the initial position size = 100 contracts EX1 exits 50 contracts EX2 exits 20% of 50 contracts = 10 contracts What's happening now After "EX1" reaches SL levels, "EX2" exits 20% from the % of the original position size. If the initial position size = 100 contracts EX1 exits 50 contracts EX2 exits 20 (20% of 100 contracts) contracts I think this is an improvement and I really enjoy this new behavior. See you in a few days with another post :) ALL THE BEST Dave
Pine Script™ Strategie
von Daveatt
7
RSITrendStrategyI don't know if there is any strategy based on RSI cross over. The strategy is designed based on RSI crossover, considering RSI(5) and RSI(11), with RSI(6) to identify highs & lows. I used this strategy to trade in Nifty 50 & Nifty bank indices. Whenever there is long mentioned on chart, I go for buying call option with premium near to 300, and placing stoploss of 50 on candle closing basis, vice versa. Target is open until short is mentioned on the chart. Sometimes, i used standard pivot points as well to mark my targets and also to trail my trades.
Pine Script™ Strategie
von email_analysts
Strategy Multiple Orders + Statistics Template - EducationalHello traders It's been a while We're back in a bear market so I have a bit more time to publish new Pine scripts for the TradingView community Special thanks to @fikira for his Multiple Orders script () and to @carnagecain for allowing me to publish this script we worked together on I got widely inspired by @fikira's script for that one This script is for educational purposes only - I wanted to show how we can add multiple TPs/SL + a table with custom statistics In this Strategy template, users can define multiple take-profit and multiple stop-loss levels. Basically, we have 4 trades per trend and each trade has its own SL/TP Statistics Stats are split per trade direction (Long, Short) and then consolidated I put custom stats in that table such as: - Probability of Win - Probability of Loss - Avg Profit/Loss per Trade - APPT: (Probability of Win * Average Gross Profit) - (Probability of Loss * Average Loss) - Number of times each TP/SL has been hit I'm catching up with all recent pinescript features as we speak - more educational scripts template to come soon Best Regards Dave
Pine Script™ Strategie
von Daveatt
8
Customizable OCC Non Repainting Scalper Bot v7.0bThis strategy is intended to be used on an automated trading platform and should be run on a one minute chart for fastest confirmations and signal relay to crypto automation platform. The strategy has been modded to only go long at this time to focus on profitability for one direction. The open long and close long text fields allow you to use your own webhook message for this purpose. I have spent quite a bit of time and I figured I would put it out to the community to share the work and also get some feedback. Ok, so let me say that I have done absolutely everything I can to make the strategy not repaint while still maintaining it's profitability. It has been a challenge so I am publishing this to the community to help test this. What I have observed: the strategy will not repaint in real time. That is, if you have the chart open and keep it open, the signals are the same as the ones that are sent out by the strategy. In certain cases, when I reload the chart- the signals might be off from what was sent. In some ways, that is repainting, but it is repainting based on losing the real time data and recalculating from a different set of bars- since I am running it on a one minute chart then the start becomes different when you refresh. To address repainting while keeping the strategy calculating as quickly as possibly I have altered the logic in the following ways: I have made an assumption which might not work for everyone- at the first tick of the next bar, you can almost safefly assume in crypto that if you are looking at the previous bar for information, the open of the current bar was the close of the previous bar. This for the most part holds true in crypto with good liquidity. If you are trading a pair that jumps around due to low volume- this might not be the strategy to use. I might publish a different version with a different logic. I have altered the security repaint to use isbarconfirmed, so at the very end of the bar (as soon as the bar is confirmed), we recalculate to the higher time frames. So as soon as the data is available, it is at that point that we can then safely calculate higher time frames. This is unique and experimental, but seems to do well at creating good signals for entry. I have employed my own intervals by utilizing the resolution as an integer (used by the previous authors)- but in this case, I use the interval to take a snapshot of the higher time frame. With open close cross, the different moving averages can cause the repainting as they change to show the exact point of the cross. The interval feature I created minimizes this by utilizing the previous bar info until the interval is closed and then we recalculate the variants. You can use the interval offset feature to denote which minute is the one that starts and ends the interval. So for instance, Trading View uses minue 1 and minute 31 for 30 minute intervals. If you offset your 30 minute interval would start on minute 16 and do its calculations based on the last 30 minutes, As with most of my scripts, I have started using filters and a "show data" feature that will give you the ability to see the values of indicators that you cannot plot in the overlay. This allows you to figure out how to filter losing trades or market conditions. I have also added a trailing stop and created a fixed stop loss as seems to perform better than the original occ strategy. The original one seemed to repaint enough that it would close too quickly and not give the posiition enough time to become profitable. In certain cases where there was a large move, it would perform well, but for the most part the trades would not close profitably even though the backtest said that it did - probably due to the delay in execution and pinescript not having a confirmation on what the actual position price was. This is still in beta mode, so please forward test first and use at your own risk. If you spot repaint issues, please send me a message and try to explain the situation.
Pine Script™ Strategie
von MauricioZuniga
23
CCI High Performance long onlyThis strategy is based on the classic Commodity Channel Index and only works long. The system enters the market when this indicator is very low ( CCI <-150 or user-defined threshold) and as soon as it regains strength (i.e. CCI> CCI of the previous candle) with a filter on the "strength" of the prices themselves (i.e. the closing of the candle that provides the signal must be higher than a certain difference - fixed at 0.25% - at the opening of the candle itself). You exit the market when you either incur a stop loss or when the prices are above the upper band of the CCI. This system is used to have a high number of profitable operations (well over 50%) with little effort in terms of number of bars, rather than wanting to capture the actual duration of a trend. It is therefore recommended for those who "suffer to see the potential losses".
Pine Script™ Strategie
von saucius
Cipher B divergencies for Crypto (Finandy support)Hello Traders! In times of high volatility, it is important to follow a market-neutral strategy to protect your hard-earned assets. The simple script employs common buy/sell and/or divergencies signals from the VuManChu Cipher B indicator with fixed stop losses and takes profits. The signals are filtered by a local trend of a coin of interest and the global trend of Bitcoin. These trends-filtered signals demonstrated better performance on most of the back- and forward- tests for USDT cryptocurrency futures. The strategy is based on my real experience, it's a diamond I want to share with you. In terms of visualization if the background is red and the price is below the yellow line then only a short position can be opened. Conversely, if the price is above the yellow line AND the background is green only a long position can be opened. Inputs from VuManChu you can find on the top. Frankly, I do not know how they can help you to improve the performance of the strategy. My inputs of the script you can find in "Trend Settings" and "TP/SL Settings" at the bottom. The checkbox "Only divergencies" lets to broadcast only more reliable buy/sell signals for a cost of rare deals. The checkbox "Cancel all positions if price crosses local sma?" makes additional trailing stop loss. Usually, this function increases the win rate by "smoothing" the risk/reward ratio, as a usual stop loss does. You can tune SL/TP based on backtesting. To connect the script to Finandy just edit "name" and "secret" to connect your webhook (see the bottom of the script). The rule of thumb for the strategy is "only divergencies" - ON, high reward/risk (TP/SL) ratio, 5 min timeframe on chart help with performance. Finally, I am looking forward to feedback from you. If you have some cool features for my script in your mind, do not hesitate to leave them in the comments. Good luck!
Pine Script™ Strategie
von Cherepanov_V
13
Directional Movement IndexADX is an oscillating indicator, displayed as a single line, ranging from 0 to 100, it only indicates the strength of the trend and does not indicate its direction. In other words, the ADX is non-directional, meaning that it measures the strength of a trend, but doesn’t distinguish between uptrend and downtrends. So, during a strong uptrend, the ADX rises and during a strong downtrend, the ADX also rises. Here is how you correctly read what ADX is saying about the market. Here are 5 aspects regarding the interpretation of the ADX: 1- When ADX is above 25, trend strength is strong. Usually, once the ADX gets above 25 this signals the beginning of a trend. Big moves (upwards or downwards) tend to happen when ADX is right around this number. You can experiment with this number, some traders that want faster signals, tend to use a 20 threshold when trading with the ADX. 2- When ADX is below 25, traders must avoid trend trading strategies as the market is in accumulation or distribution phase. So, when we see the ADX line below 20 or 25 level, we forget about trend following strategies and we apply strategies suitable for a ranging market. 3- When ADX is above 25 and Positive Directional Movement Indicator (+DMI) is above the Negative Directional Movement Indicator (-DMI). ADX measures the strength of an uptrend. The crossover between the 2 Directional Movement Indicator, as the ADX line is well above 25 can result in an excellent bullish move. 4- The Positive Directional Movement Indicator (+DMI) should be above the Negative Directional Movement and the ADX should be above 25 signals for a strong upward trend for long opportunities. When ADX is above 25 and Positive Directional Movement Indicator is below the Negative Directional Movement Indicator, ADX measures the strength of a downtrend and short opportunities. 5- Values over 50 of the ADX indicate a very strong trend There are pros and cons of ADX. So, why is the ADX useful for traders: First, is excellent at quantifying trend strength. Also, it allows traders to see the strength of bulls and bears at the same time. It is good at filtering out trades, during accumulation periods and is good at identifying trending conditions. But the ADX also has its limitations. The most important disadvantage is the fact that ADX is a lagging indicator that follows the price, so we must be very careful when we apply this indicator, because we might miss the inception of the trend and join it when it’s nearly over. Also, it offers many false signals when used on shorter time frames, so it’s advisable to trade it on higher time frames Also, the ADX does not contain all of the data necessary a for proper analysis of price action, so it must be used in combination with other tools or indicators. Now that we fully covered the good and the bad regarding ADX, let’s see how it is used in a trading strategy. The trading strategy involves a DMI crossover, confirmed by ADX above consolidation threshold. If +DMI crossover, we take long position and if -DMI crosses over, we take a short position. Candles are re-colored for easy demonstration of uptrend, downtrend and consolidation periods. Green candles – ADX > Consolidation Threshold and +DMI > -DMI Red candles – ADX > Consolidation Threshold and +DMI < -DMI Black candles – ADX < Consolidation Threshold Repaint – This is a non-repainting strategy - All the signals are generated at candle closing. All the calculations are made on previous candle’s open, high, low, close. No request security function is used. No data is being used from higher time frame. Trade exit uses close function instead of exit to avoid limit orders. Only one long trade at a time (no pyramiding) is allowed. Strategy Time frame – D (To filter out false signals, higher time frame is recommended) Strategy For – Swing Traders Assets – Cryptocurrencies + Stocks
Pine Script™ Strategie
von wojak_bogdanoff
9
Buy/Sell on the levelsThis script is generally My describe is: There are a lot of levels we would like to buy some crypto. When the price has crossed the level-line - we buy, but only if we have the permission in array(2) When we have bought the crypto - we lose the permission for buy for now(till we will sell it on the next higher level) When we sell some crypto(on the buying level + 1) we have the permission again. There also are 2 protect indicators. We can buy if these indicators both green only(super trend and PIVOT ) Jun 12 Release Notes: Hello there, Uncomment this section before use for real trade: if array.get(price_to_sellBue, i) >= open and array.get(price_to_sellBue, i) <= close// and //direction < 0 and permission_for_buy != 0 Here is my script. In general - this is incredible simple script to use and understand. First of all You can see this script working with only long orders, it means we going to get money if crypto grows only. Short orders we need to close the position on time. In this script we buy crypto and sell with step 1% upper. You can simply change the step by changing the price arrays. Please note, if You want to see where the levels of this script is You Have to copy the next my indicator called LEVEL 1% In general - if the price has across the price-level we buy some crypto and loose permission for buying for this level till we sell some crypto. There is ''count_of_orders" array field with value 2. When we bought some crypto the value turns to 0. 0 means not allowed to by on this level!!! The script buy if the bar is green only(last tick). The script check every level(those we can see in "price_to_sellBue" array). If the price across one of them - full script runs. After buying(if it possible) we check is there any crypto for sell on the level. We check all levels below actual level( of actual level - ''i'' than we check all levels from 0 to i-1). If there is any order that has value 0 in count of orders and index <= i-1 - we count it to var SELL amount and in the end of loop sell all of it. Pay attention - it sells only if price across the level with red bar AND HAS ORDERS TO SELL WHICH WAS BOUGHT BELOW!!! In Strategy tester it shows not-profitables orders sometimes, because if You have old Long position - it sells it first. First in - first out. If the price goes down for a long time and You sell after 5 buys You sell the first of it with the highest value. There is 2 protection from horrible buying in this strategy. The first one - Supertrend. If the supertrend is red - there is no permission for buy. The second one - something between PIVOT and supertrend but with switcher. If the price across last minimum - switcher is red - no permission for buy and the actual price becomes last minimum . The last maximum calculated for last 100 bars. When the price across last maximum - switcher is green, we can buy. The last minimum calculation for last 100 bars, last maximum is actual price. This two protections will save You from buying if price get crash down. Enjoy my script. Should You need the code or explanation, You have any ideas how to improve this crypt, contact me. Vladyslav. Jun 12 Release Notes: Here has been uncommented the protection for buy in case of price get down. 5 hours ago Release Notes: Changed rages up to actual price to make it work
Pine Script™ Strategie
von Arivadis
2
Bjorgum Double Tap█   OVERVIEW Double Tap is a pattern recognition script aimed at detecting Double Tops and Double Bottoms. Double Tap can be applied to the broker emulator to observe historical results, run as a trading bot for live trade alerts in real time with entry signals, take profit, and stop orders, or to simply detect patterns. █   CONCEPTS How Is A Pattern Defined? Doubles are technical formations that are both reversal patterns and breakout patterns. These formations typically have a distinctive “M” or a “W” shape with price action breaking beyond the neckline formed by the center of the pattern. They can be recognized when a ​pivot fails to break when tested for a second time and the retracement that follows breaks beyond the key level opposite. This can trap entrants that were playing in the direction of the prior trend. Entries are made on the breakout with a target projected beyond the neckline equal to the height of the pattern. Pattern Recognition Patterns are recognized through the use of ​zig-zag; a method of filtering price action by connecting swing highs and lows in an alternating fashion to establish trend, ​support and resistance, or derive shapes from price action. The script looks for the highest or lowest point in a given number of bars and updates a list with the values as they form. If the levels are exceeded, the values are updated. If the direction changes and a new significant point is made, a new point is added to the list and the process starts again. Meanwhile, we scan the list of values looking for the distinctive shape to form as previously described. █   STRATEGY RESULTS Back Testing Historical back testing is the most common method to test a strategy due in part to the general ease of gathering quick results. The underlying theory is that any strategy that worked well in the past is likely to work well in the future, and conversely, any strategy that performed poorly in the past is likely to perform poorly in the future. It is easy to poke holes in this theory, however, as for one to accept it as gospel, one would have to assume that future results will match what has come to pass. The randomness of markets may see to it otherwise, so it is important to scrutinize results. Some commonly used methods are to compare to other markets or benchmarks, perform statistical analysis on the results over many iterations and on differing datasets, walk-forward testing, out-of-sample analysis, or a variety of other techniques. There are many ways to interpret the results, so it is important to do research and gain knowledge in the field prior to taking meaningful conclusions from them. 👉  In short, it would be naive to place trust in one good backtest and expect positive results to continue. For this reason, results have been omitted from this publication. Repainting Repainting is simply the difference in behaviour of a strategy in real time vs the results calculated on the historical dataset. The strategy, by default, will wait for confirmed signals and is thus designed to not repaint. Waiting for bar close for entires aligns results in the real time data feed to those calculated on historical bars, which contain far less data. By doing this we align the behaviour of the strategy on the 2 data types, which brings significance to the calculated results. To override this behaviour and introduce repainting one can select "Recalculate on every tick" from the properties tab. It is important to note that by doing this alerts may not align with results seen in the strategy tester when the chart is reloaded, and thus to do so is to forgo backtesting and restricts a strategy to forward testing only. 👉  It is possible to use this script as an indicator as opposed to a full strategy by disabling "Use Strategy" in the "Inputs" tab. Basic alerts for detection will be sent when patterns are detected as opposed to complex order syntax. For alerts mid-bar enable "Recalculate on every tick" , and for confirmed signals ensure it is disabled. █   EXIT ORDERS Limit and Stop Orders By default, the strategy will place a stop loss at the invalidation point of the pattern. This point is beyond the pattern high in the case of Double Tops, or beneath the pattern low in the case of Double Bottoms. The target or take profit point is an equal-legs measurement, or 100% of the pattern height in the direction of the pattern bias. Both the stop and the limit level can be adjusted from the user menu as a percentage of the pattern height. Trailing Stops Optional from the menu is the implementation of an ATR based trailing stop. The trailing stop is designed to begin when the target projection is reached. From there, the script looks back a user-defined number of bars for the highest or lowest point +/- the ATR value. For tighter stops the user can look back a lesser number of bars, or decrease the ATR multiple. When using either Alertatron or Trading Connector, each change in the trail value will trigger an alert to update the stop order on the exchange to reflect the new trail price. This reduces latency and slippage that can occur when relying on alerts only as real exchange orders fill faster and remain in place in the event of a disruption in communication between your strategy and the exchange, which ensures a higher level of safety. 👉  It is important to note that in the case the trailing stop is enabled, limit orders are excluded from the exit criteria. Rather, the point in time that the limit value is exceeded is the point that the trail begins. As such, this method will exit by stop loss only. █   ALERTS Five Built-in 3rd Party Destinations The following are five options for delivering alerts from Double Tap to live trade execution via third party ​API solutions or chat bots to share your trades on social media. These destinations can be selected from the input menu and alert syntax will automatically configure in alerts appropriately to manage trades. Custom JSON JSON, or JavaScript Object Notation, is a readable format for structuring data. It is used primarily to transmit data between a server and a web application. In regards to this script, this may be a custom intermediary web application designed to catch alerts and interface with an exchange ​API. The JSON message is a trade map for an application to read equipped with where its been, where its going, targets, stops, quantity; a full diagnostic of the current state and its previous state. A web application could be configured to follow the messages sent in this format and conduct trades in sync with alerts running on the TV server. Below is an example of a rendered JSON alert: { "passphrase": "1234", "time": "2022-05-01T17:50:05Z", "ticker": "ETHUSDTPERP", "plot": { "stop_price": 2600.15, "limit_price": 3100.45 }, "strategy": { "position_size": 0.1, "order_action": "buy", "market_position": "long", "market_position_size": 0, "prev_market_position": "flat", "prev_market_position_size": 0 } } Trading Connector Trading Connector is a third party fully autonomous Chrome extension designed to catch alert webhooks from TradingView and interface with MT4/MT5 to execute live trades from your machine. Alerts to Trading Connector are simple; just select the destination from the input drop down menu, set your ticker in the "TC Ticker" box in the "Alert Strings" section and enter your URL in the alert window when configuring your alert. Alertatron Alertatron is an automated algo platform for cryptocurrency trading that is designed to automate your trading strategies. Although the platform is currently restricted to crypto, it offers a versatile interface with high flexibility syntax for complex market orders and conditions. To direct alerts to Alertatron, select the platform from the 3rd party drop down, configure your ​API key in the ”Alertatron Key” box and add your URL in the alert message box when making alerts. 3 Commas 3 Commas is an easy and quick to use click-and-go third party crypto ​API solution. Alerts are simple without overly complex syntax. Messages are simply pasted into alerts and executed as alerts are triggered. There are 4 boxes at the bottom of the "Inputs" tab where the appropriate messages to be placed. These messages can be copied from 3 Commas after the bots are set up and pasted directly into the settings menu. Remember to select 3 Commas as a destination from the third party drop down and place the appropriate URL in the alert message window. Discord Some may wish to share their trades with their friends in a Discord chat via webhook chat bot. Messages are configured to notify of the pattern type with targets and stop values. A bot can be configured through the integration menu in a Discord chat to which you have appropriate access. Select Discord from the 3rd party drop down menu and place your chat bot URL in the alert message window when configuring alerts. 👉  For further information regarding alert setup, refer to the platform specific instructions given by the chosen third party provider. █   IMPORTANT NOTES Setting Alerts For alert messages to be properly delivered on order fills it is necessary to place the following placeholder in the alert message box when creating an alert. {{strategy.order.alert_message}} This placeholder will auto-populate the alert message with the appropriate syntax that is designated for the 3rd party selected in the user menu. Order Sizing and Commissions The values that are sent in alert messages are populated from live metrics calculated by the strategy. This means that the actual values in the "Properties" tab are used and must be set by the user. The initial capital, order size, commission, etc. are all used in the calculations, so it is important to set these prior to executing live trades. Be sure to set the commission to the values used by the exchange as well. 👉  It is important to understand that the calculations on the account size take place from the beginning of the price history of the strategy. This means that if historical results have inflated or depleted the account size from the beginning of trade history until now, the values sent in alerts will reflect the calculated size based on the inputs in the "Properties" tab. To start fresh, the user must set the date in the "Inputs" tab to the current date as to remove trades from the trade history. Failure to follow this instruction can result in an unexpected order size being sent in the alert. █   FOR PINECODERS  • With the recent introduction of matrices in Pine, the script utilizes a matrix to track ​pivot points with the bars they occurred on, while tracking if that ​pivot has been traded against to prevent duplicate detections after a trade is exited.  • Alert messages are populated with placeholders ; capability that previously was only possible in alertcondition() , but has recently been extended to `strategy.*()` functions for use in the `alert_message` argument. This allows delivery of live trade values to populate in strategy alert messages.  • New arguments have been added to strategy.exit() , which allow differentiated messages to be sent based on whether the exit occurred at the stop or the limit. The new arguments used in this script are `alert_profit` and `alert_loss` to send messages to Discord
Pine Script™ Strategie
von Bjorgum
72
Fibonacci Zone DCA Strategy - R3c0nTraderCredits: Thank you "eykpunter" for granting me permission to use "Fibonacci Zones" to create this strategy Thank you "junyou0424" for granting me permission to use "DCA Bot with SuperTrend Emulator" which I used for adding bot inputs, calculations, and strategy Pre-requisites: You can use this script without a 3Commas account and see how 3Commas DCA Bot would perform. However, I highly recommend signing up for their free account, going through their training, and testing this strategy with a paper bot. This would give you a base understanding of the settings you will see in this strategy and why you will need to know them. What can this do? First off, this is a Long only strategy as I wrote it with DCA in mind. It cannot be used for shorting. Shorting defeats the purpose of a DCA bot which has a goal that is Long a position not Short a position. If you want to short, there are plenty of free scripts out there that do this. I created this script out of curiosity and I wanted to see how a strategy based on “Fibonacci” levels would work with a 3Commas DCA bot. I came across "eykpunter’s" "Fibonacci Zones" study and in TradingView and I found it to be a very interesting concept. The "Fib Zones" in his study are basically a "Donchian Channel" of 4 Fibonacci lines. These are the High @ 0.236, Center High @ 0.382, Center Low @ 0.618, and Low @ 0.764. The Fib Zones in this strategy can be used as conditions to open a trade as well as closing a trade. There is also the option to close a trade based on a Target Take Profit (%). Advanced Fibonacci trading is also supported by specifying additional parameters for Trade Entry and Exit. For example, for order entry, you can increase the minimum trend strength to open an order via the "minimum ADX value" option. You can also further limit order entry by selecting the option to "Only open trades on bullish +DI" (Positive Directional Index). Or you can play the contrarian. For example, I would look for "buying the dip" opportunities by doing the following under "Trade Entry Settings": Set the "Min ADX value to open trade" to zero Set the option "Open a trade when the price moves" to "1-To the bottom of Downtrend Fib zone" or "2-Higher than the top of the Downtrend Fib zone" Uncheck option "Only open trades on bullish +DI" Set the 'Min ADX value to open trade' to Zero Set the 'Max +DI value to open trade' to a value between 10-20. For Trade Exit settings, I can use a "Target Take Profit (%)" or one of the High Fib levels to close the trade. Here's an example result when using a Contrarian-Fibonacci-Zone-DCA strategy: Explanation of Chart lines and colors on chart Six Options for Entering a Fibonacci Trade Open a trade when the price moves: 1-To the bottom of Downtrend Fib zone 2-Higher than the top of the Downtrend Fib zone 3-Higher than the bottom of Ranging Fib Zone 4-Higher than the top of Ranging Fib Zone 5-Higher than the bottom of Uptrend Fib Zone 6-To the top of Uptrend Fib Zone Three Options for Exiting a Fibonacci Trade Take profit using: "Target Take Profit (%)" "High Fibonacci Border-1" "High Fibonacci Border-2"
Pine Script™ Strategie
von R3c0nTrader
9
Profitable Contrarian scalpingUses the 5 period and 10 period VMWAs that have been smoothed with a 5 period SMA of the close price. Normally, a short crossover long formation signals a buy signal, but as scalpers know, the 1 minute chart moves so fast and with so much volatility that lagging indicators get wrecked by the market. According, this strategy operates under the assumption that by the time this lagging indicator makes a signal, the price is ready to reverse. Losses are taken swiftly in the case of a continuation pattern. This indicator averages a 55-65% profitable rate and is almost always a positive P/L on the 1 minute chart of the most commonly traded assets. Of course, there may be validity for this indicator outside the 1 minute chart, but I have found such success to be very limited. Accordingly, use this indicator on SPY, TQQQ, TSLA, AMZN, and major cryptos on the 1 min chart.
Pine Script™ Strategie
von Jaerevan47
1
ETH APO Strategy [60MIN]In general this strategy is wining but I won't recommend a trader to start using it directly. You can you use it as a template to build your own strategy on, with a bit improvement you can get much better results. The APO indicator is the core of this strategy and it only work on Long trades, you may focus on fining a way to filter the wrong long entries to make it a safe strategy with low drawdown. BEST PERFORMANCE: KUCOIN:ETHUSDT 60MIN chart
Pine Script™ Strategie
von layth7ussein
4
Booz StrategyBooz Backtesting : Booz Backtesting is a method for analyzing the performance of your current trading strategy . Booz Backtesting aims to help you generate results and evaluate risk and return without risking real capital. The Booz Backtesting is the Booz Super Swing Indicator equivalent but gives you the ability to backtest data on different charts. This is an Indicator created for the purpose of identifying trends in Multiple Markets, it is based on Moving Average Crossover and extra features. Swing Trading: This function allows you to navigate the entire trend until it is not strong enough, so you can compare it with fixed parameters such as Take Profit and Stop Loss. Take Profit and Stop Loss function: With this function you will be able to choose the most optimal parameters and see in real time the results in order to choose the best combination of parameters. Leverage : We have this function for the futures markets where you can check which is the most appropriate leverage for your operation. Trend Filter: allows you to take multiple entries in the same direction of the market. If the market crosses below the 200 moving average, it will take only short entries. If the market crosses above the 200 moving average, it will take only long entries. Timeframes Charting from 1 Hour, 4 Hour, Daily, Weekly, Weekly Markets :Booz Backtesting can be tested in Cryptocurrency, Stocks and Futures markets. Background Color : at a glance, you can see what cycle the market is in. Green background : Shows that the market is in a bullish cycle. Red background: Shows that the market is in a bearish cycle.
Pine Script™ Strategie
von ArnoldTrader_