Auf geht's

Breitenindikatoren

Volume Anomaly Reversal DetectionVolume Anomaly Reversal Detection (VARD System) 🎯 What This Indicator Does This indicator identifies potential trend reversals by detecting abnormal volume activity that often precedes significant price movements. It combines volume anomaly detection with dynamic trend analysis to generate actionable BUY/SELL signals. 📊 Core Concept & Methodology Volume Anomaly Detection The indicator analyzes directional volume (buying vs selling pressure) from a lower timeframe and calculates Z-scores to identify statistically significant volume spikes. Z-Score Formula: Z = (Current Volume - Average Volume) / Standard Deviation When volume exceeds the threshold (default: 3 standard deviations above mean), it signals unusual market activity - often caused by forced liquidations or capitulation. Dynamic Trend Filter A custom trend-following algorithm based on ATR (Average True Range) bands determines the current market direction: Price above lower band = Uptrend Price below upper band = Downtrend Signal Logic Volume anomaly detected during an existing trend Trend reversal confirmed within the confirmation window Signal generated = BUY or SELL label appears ⚙️ Settings Explained SettingDefaultDescriptionAnalysis Timeframe15minLower timeframe for volume samplingStatistical Lookback200Bars used for Z-score calculationAnomaly Sensitivity3.0Z-score threshold (lower = more signals)Confirmation Window50Max bars between anomaly and trend flipATR Multiplier2.0Trend band widthTrend Period10ATR calculation length 📖 How To Use Entry Signals BUY: Green label appears below bar - consider long positions SELL: Red label appears above bar - consider short positions Volume Anomaly Markers (⬥) Small diamonds indicate detected volume spikes These are early warnings before confirmed signals Useful for anticipating potential reversals Trend Bands Colored zones show active signal direction Stay with the trend until opposite signal appears Best Practices Confirm with price action - Look for support/resistance levels Use appropriate timeframes - Works on all timeframes, but 1H-4H recommended Manage risk - Always use stop losses Avoid ranging markets - Best in trending/volatile conditions ⚠️ Important Notes No indicator is perfect - Use as part of a complete trading strategy Volume data required - Will show warning if volume unavailable Not financial advice - Always do your own research 🔔 Alerts Available BUY Signal Confirmed SELL Signal Confirmed Volume Anomaly (Buy Setup) Volume Anomaly (Sell Setup)
Pine Script® Indikator
von A1TradingHub
6
3 EMA Multi-TimeframeSure! Here is the English version of the indicator description, formatted professionally so you can use it in the "Description" field on TradingView or for your own documentation. Indicator Description: 3 EMA Multi-Timeframe (Customizable) The 3 EMA Multi-Timeframe indicator is a versatile technical analysis tool designed to plot three independent Exponential Moving Averages (EMA) on a single chart. Its core strength lies in the ability to bridge different timeframes, allowing traders to maintain a "big picture" perspective without switching tabs. 1. Key Features Fully Customizable Lengths: Users can define the period for each EMA (e.g., the classic 20, 50, and 200 setup or any custom values tailored to specific strategies). Multi-Timeframe (MTF) Capability: This feature allows you to overlay EMAs from higher timeframes (e.g., Daily or Weekly) onto your current lower timeframe chart (e.g., 5-minute or 15-minute). Visual Smoothness: Built with barmerge.gaps_on logic, the indicator prevents "stair-stepping" visual artifacts, ensuring the higher timeframe lines appear smooth and readable on lower timeframe bars. Color Coordination: Each line can be color-coded and adjusted for thickness to improve visual hierarchy and chart clarity. 2. Default Parameters EMA 1 (Short-term): Defaulted to 20 periods. Ideal for identifying short-term momentum and potential entry points during pullbacks. EMA 2 (Medium-term): Defaulted to 50 periods. Acts as a primary dynamic support or resistance level in trending markets. EMA 3 (Long-term): Defaulted to 200 periods. Used to define the "Major Trend" or the overall bias of the asset. 3. Trading Applications Trend Identification: A strong uptrend is confirmed when price stays above all three EMAs and the lines are stacked in order (20 > 50 > 200). Crossovers: Traders can monitor "Golden Crosses" (short-term crossing above long-term) or "Death Crosses" (short-term crossing below long-term) as signals for potential trend reversals. Dynamic Support/Resistance: Higher timeframe EMAs often act as "magnets" or "floors" for price action on lower timeframes, providing high-probability zones for trade setups.
Pine Script® Indikator
von jaykind
Advanced RS Ranking & Peer ComparisonAdvanced RS Rating & Sector Comparison Original Concept & Logic by Dr. Chintan Joshi Overview This indicator is designed to help traders identify Market Leaders by quantifying Relative Strength (RS) on a standardized 1-99 scale. Unlike standard RSI (which looks at internal momentum), this RS Rating measures a stock's performance relative to a Benchmark (default: NIFTY 50) over a specific lookback period. The tool goes a step further by comparing the stock's RS Rating against its Market Cap Index (e.g., Smallcap) and its Sector Index (e.g., CNX Metal, CNX IT) to determine if the stock is a "Leader" or a "Laggard" within its own category. Key Features RS Rating (0-99 Scale): Calculates the ratio of the Stock Price vs. Benchmark (Nifty). Normalizes this ratio over a lookback period (Default: 90 bars) to produce a score between 1 and 99. A score of 90+ indicates the stock is in the top tier of relative performance against the benchmark. Sector & Cap Comparison: Auto-Sector Detection: The script automatically attempts to detect the sector of the current symbol (e.g., "Tata Motors" -> "CNXAUTO") and compares the stock's RS against the Sector Index's RS. Market Cap Context: Compares the stock against a broader Market Cap index (Default: CNXSMALLCAP) to see if it is outperforming its capitalization peers. Leader vs. Laggard Status: The dashboard calculates the "Lead/Lag" spread. Green (Leader): The stock's RS Rating is higher than the comparison index. Red (Laggard): The stock's RS Rating is lower than the comparison index. How to Use Add to Chart: The indicator displays a compact table (movable and resizable). Settings: RS Lookback Length: Default is 90 (approx 1 quarter for daily charts). Adjust based on your trading style (e.g., 21 for short term, 250 for long term). Benchmark: Set your base market index (Default: NSE:NIFTY). Market Cap Index: Set the index relevant to your stock (e.g., NSE:CNXSMALLCAP or NSE:CNX500). Sector Logic: Keep "Auto-Detect" on for NSE stocks. If the sector is not detected, you can manually define a sector ticker (e.g., NSE:CNXREALTY). Visuals: You can change the table size (Tiny to Huge) and position (e.g., Bottom Right) in the settings to fit your screen layout. Interpreting the Dashboard RS Rating: The raw strength score of the current symbol. Lead/Lag: The points difference between the Stock's score and the Index's score. Example: If Stock RS is 95 and Sector RS is 80, the Lead is +15.0. Status: Text indication of "Leader" or "Laggard". Credits: This script and the underlying Relative Strength ranking logic are based on the concepts developed by Dr. Chintan Joshi.
Pine Script® Indikator
von drchintanjoshi
Daily Percentage Oscillator### Daily Percentage Oscillator – Indicator Description The **Daily Percentage Oscillator** transforms intraday price action into a clean, normalized percentage-based view, using the previous trading day's closing price as the fixed 0% baseline. Each new trading day automatically resets the axis to that prior close, allowing you to visualize true daily price oscillation without the distortion of absolute price levels or cumulative trends. Key features: - **Percentage-based OHLC display**: All bars or candlesticks represent percentage change from the previous day’s close, creating a consistent oscillation around the 0% line. - **Daily reset**: The baseline updates every session, making it ideal for intraday traders focusing on relative strength, mean reversion, or daily momentum patterns. - **Toggle between bars and candlesticks**: Choose your preferred visual style. - **Simple Moving Average (SMA)**: Optional SMA applied directly to the percentage close values (default 20-period, fully customizable). - **Daily-resetting VWAP**: Volume-Weighted Average Price calculated on the percentage series, resetting at the start of each trading day for precise intraday anchoring. - **Clean presentation**: No clutter from scale labels or status line values — only the essential visuals appear in the pane. This indicator is particularly useful for: - Comparing intraday momentum across different assets or timeframes on equal footing. - Identifying overbought/oversold conditions relative to the prior close. - Enhancing mean-reversion and range-bound trading strategies. - Overlaying percentage-based anchors (SMA, VWAP) that respect the daily session structure. Works on any intraday timeframe (1m, 5m, 15m, etc.) and is designed to stay lightweight and responsive. Perfect for day traders and scalpers seeking a clearer, more intuitive view of daily price behavior.
Pine Script® Indikator
von robw888
SNIPER Initial Balance V1SNIPER INITIAL BALANCE V1 ### What It Does Draws the first hour's high/low range with extensions and breakout signals. ### IB Times (Auto-Selected) | Market Type | IB Period (ET) | |-------------|----------------| | Index (ES/NQ/YM) | 9:30 - 10:30 | | Gold (GC/MGC) | 8:30 - 9:30 | | Energy (CL) | 9:00 - 10:00 | ### Levels Drawn | Level | Style | Purpose | |-------|-------|---------| | IB High | Solid | Resistance | | IB Low | Solid | Support | | IB Mid | Dashed | Mean reversion | | 50% Ext | Dotted | Target 1 | | 100% Ext | Dotted | Target 2 | | 1SD (1.28x) | Dashed | 80% range | | 2SD (2.0x) | Dashed | 95% range | ### Signals | Signal | Meaning | Action | |--------|---------|--------| | `IB↑` | Breakout above IB High | Look for long | | `IB↓` | Breakout below IB Low | Look for short | | `RT↑` | Retest long entry | **BEST ENTRY** - Go long | | `RT↓` | Retest short entry | **BEST ENTRY** - Go short | | `FK` | Fakeout warning | **AVOID** - Don't enter | ### Entry Requirements (All Must Be True) - ✅ Close above/below level (not just wick) - ✅ Volume ≥ 1.3x average - ✅ Body ≥ 60% of candle - ✅ Minimal adverse wick ### Quick Trade Plan ``` LONG: Wait for RT↑ → SL below IB Low → TP at 50% or 100% ext SHORT: Wait for RT↓ → SL above IB High → TP at 50% or 100% ext ``` ---
Pine Script® Indikator
von alexandrodisla
GS WedgeWedge automatically detects confirmed swing highs and lows and draws clean wedge trendlines directly from the true pivot bars. The indicator uses non-repainting pivots and extends the lines forward to highlight contracting price structures, potential breakouts, and compression zones. Designed for traders who value structure over noise, it works best on higher timeframes and pairs naturally with support, resistance, and volume analysis. This tool focuses on clarity and reliability, not prediction.
Pine Script® Indikator
von Green_Squad
Multi-Timeframe ATR & RSI Panel v2.0Multi-Timeframe ATR & RSI Panel v2.0 A powerful overlay indicator combining multi-timeframe analysis of volatility (ATR %), RSI, and Keltner Channel trend direction. Key Features: Multi-TF Table: Displays ATR (absolute and %), ATR % change (Δ), RSI, KC middle line value, and KC trend (↑/↓) for up to 7 customizable timeframes. Average Row (AVG): Shows aggregated values across all selected TFs, including dominant KC trend with strength indication (↑ / ↑↑ / ↑↑↑ or ↓ / ↓↓ / ↓↓↓ based on majority vote). Smart Signals: Tiny "B" (Buy) and "S" (Sell) markers appear only when conditions align: Dominant multi-TF KC trend confirmation (optional). Volatility filter: signals on high volatility (> threshold) or low volatility (< threshold) — user-selectable mode. Optional filters: touch of Keltner Channel bands and RSI overbought/oversold zones. Clean Chart: Minimal visual clutter — only small triangles with "B"/"S" labels. Fully Customizable: Choose timeframes, toggle columns, adjust colors, thresholds, and all filters independently. Ideal for traders who want clear multi-timeframe confluence, volatility-aware entries, and clean visual feedback. Works on any instrument and timeframe. Settings grouped for ease of use — perfect balance between flexibility and simplicity. Enjoy precise, high-probability setups! 🚀 ------------------------ Русское описание для публикации на TradingView Multi-Timeframe ATR & RSI Panel v2.0 Мощный оверлей-индикатор, объединяющий мульти-таймфреймовый анализ волатильности (ATR %), RSI и направления тренда по Keltner Channel. Основные возможности: Мульти-ТФ таблица: Отображает ATR (абсолютное и %), изменение ATR % (Δ), RSI, значение средней линии KC и тренд по KC (↑/↓) для до 7 настраиваемых таймфреймов. Строка среднего (AVG): Показывает агрегированные значения по всем выбранным ТФ, включая доминирующий тренд KC с указанием силы (↑ / ↑↑ / ↑↑↑ или ↓ / ↓↓ / ↓↓↓ в зависимости от большинства). Умные сигналы: Маленькие метки "B" (Buy) и "S" (Sell) появляются только при совпадении условий: Подтверждение доминирующего мульти-ТФ тренда KC (опционально). Фильтр по волатильности: сигналы на высокой волатильности (> порога) или низкой (< порога) — выбираемый режим. Опциональные фильтры: касание границ Keltner Channel и зоны перепроданности/перекупленности RSI. Чистый график: Минимальный визуальный шум — только маленькие треугольники с буквами "B"/"S". Полная кастомизация: Выбор таймфреймов, включение/выключение столбцов, настройка цветов, порогов и всех фильтров независимо. Идеален для трейдеров, которые ищут чёткое мульти-таймфреймовое подтверждение, входы с учётом волатильности и чистую визуальную обратную связь. Работает на любом инструменте и таймфрейме. Настройки сгруппированы для удобства — идеальный баланс между гибкостью и простотой. Удачных и точных сделок! 🚀
Pine Script® Indikator
von Petro_Max
Supertrend Advanced Strategy - XabierLSupertrend Advanced Strategy - Multi-Filter System 📊 Overview This is a sophisticated trend-following strategy built around the Supertrend indicator, enhanced with multiple confirmation filters to reduce false signals and improve trade quality. The strategy is designed for USDT-M perpetual futures and is fully compatible with Bitget Webhook signals for automated trading. ✨ Key Features Core Components: Supertrend Indicator: Primary trend direction detector with customizable ATR period and multiplier Entry Confirmation System: Requires multiple consecutive candles to confirm trend direction before entry ADX Filter: Ensures trades are taken only in trending markets (filters out choppy/sideways conditions) RSI Filter: Prevents entries in extreme overbought/oversold zones Candlestick Pattern Filter: Optional bullish/bearish engulfing pattern confirmation Flexible Direction: Trade longs only, shorts only, or both directions
Pine Script® Strategie
von XabierL
Liquidity Sweep Pro [Whale Edition]Liquidity Sweep Pro is a next-generation trading tool that bridges the gap between Smart Money Concepts (SMC) and Quantitative Volume Analysis. Traditional "Liquidity Sweep" indicators often generate false signals by marking every wick crossover as a trade setup. This indicator solves that problem by filtering setups through a Quant VSA Engine. It asks not just "Did price sweep a level?" but "Was there institutional money behind this move?" 🔬 How It Works The indicator operates on three synchronized layers: 1. Market Structure (Liquidity Pools) It automatically identifies key pivot points where retail Stop Losses are likely clustered: Buy Side Liquidity (BSL): Areas above swing highs. Sell Side Liquidity (SSL): Areas below swing lows. 2. The Quant Engine (Whale Detection) Instead of using simple volume averages, we apply statistical modeling to detect anomalies: Log-Normal Z-Score: Normalizes volume data to detect statistically significant outliers (Sigma > 2.5). This adapts to market volatility, filtering out noise. Kaufman Efficiency Ratio (KER): Analyzes the quality of price movement to classify the "Whale" type: ❄️ Absorption (Iceberg): High Volume + Low Price Movement. Signals a potential reversal. 🚀 Propulsion (Drive): High Volume + High Price Efficiency. Signals an aggressive breakout. 3. The Trigger (Smart Entry) A trade signal is generated ONLY when: Price sweeps a liquidity level (wicking below/above). Price closes back within the range. Institutional Activity is confirmed (High Z-Score Volume). Trend (EMA 200) and Momentum (RSI) filters are aligned. 🛡️ Features Intrabar Analysis: Uses request.security_lower_tf to analyze the internal volume delta of the candle for maximum precision. Automated Risk Management: Plots Entry, Take Profit, and Stop Loss levels directly on the chart based on ATR (Average True Range) and your preferred Risk:Reward ratio. Unified Alerts: Includes a single "ANY SWEEP" alert condition, allowing you to monitor both Long and Short setups with just one TradingView alert. Visual Classification: Candles with institutional activity are marked with a 🐋 symbol, even if no sweep occurs, helping you read the narrative. ⚙️ Best Settings & Usage Timeframes: Works best on 15m, 1h, and 4h charts. LTF Interval (Input): This is crucial. If trading on the 1h chart, set LTF to 1 minute. If trading on the 4h chart, set LTF to 5 minutes. Whale Threshold: Default is 2.5 Sigma. Increase to 3.0 for fewer, higher-confidence signals, or decrease to 2.0 for more frequency. ⚠️ Disclaimer This tool is for educational purposes only. It identifies statistical probabilities, not certainties. Always manage your risk and do not rely solely on one indicator.
Pine Script® Indikator
von TheMrD
HTF Candles on Lower Timeframes (Manual OHLC)Hi everyone, this indicator is designed to plot higher timeframes candles on the chart. Here are the details: The data is built directly from OHLC values at specific time intervals, instead of using request.security. It supports 1H / 2H / 4H / 8H / 1D higher timeframes, and can be viewed on lower timeframes such as 5m / 10m / 15m / 30m. The main idea behind this chart is to serve as a foundation for building other indicators that need to operate on higher timeframes while still being visualized on lower timeframes. Feel free to share your feedback or ideas for improvement in the comments below.
Pine Script® Indikator
von begril
False Breakdown Long Confirm (dropthoughcashin)// ============================================================================= // EN — Script Introduction // Name: False Breakdown Long Confirm (dropthoughcashin) // Timeframe: Designed for 5-minute charts (works on other TFs but tuned for 5m) // // What this script does: // This indicator detects a “false breakdown” (liquidity sweep) below a support // level, followed by a reclaim and a retest-hold confirmation. When confirmed, // it prints a label and triggers the alert condition: dropthoughcashin. // // Core logic (3 steps): // 1) Define the support level (Key Level): // - Pivot mode: uses the latest confirmed pivot low as support. // - Manual mode: uses your manually entered support level. // 2) False breakdown + reclaim: // - Price sweeps below support (low < support), // - The sweep must be shallow (limited by ATR multiple or fixed points), // - Then price reclaims: close back above the support. // 3) Retest-hold confirmation (within N bars after reclaim): // - Price retests near the support (low <= support + tolerance), // - And closes at/above the support (hold), // - If confirmed within the window, signal triggers once. // // Key parameters: // - Max Penetration: filters out “deep breakdowns” you do NOT want. // - Retest tolerance: how close price must retest the support. // - Confirm within N bars: time limit to confirm after reclaim. // // Notes / Limitations: // - Pivot support is lagging by design (pivot is confirmed after pLen bars). // - This is a signal/alert tool, not a full trading strategy. // ============================================================================= // // 中文 — 脚本介绍 // 名称：False Breakdown Long Confirm（dropthoughcashin） // 周期：主要为 5分钟K 设计（其他周期也能用，但默认参数以 5m 优化） // // 脚本作用： // 本指标用于识别“假跌破（扫流动性/扫止损）”形态：价格先刺破支撑位，随后快速收回 // 并在短时间内回踩踩住，形成做多确认。确认后会在图上打标签，并触发提醒条件： // dropthoughcashin。 // // 核心逻辑（3步）： // 1) 定义支撑位（Key Level）： // - Pivot 模式：用最近确认的 pivot low（局部低点）作为支撑。 // - Manual 模式：用你手动输入的固定支撑价位。 // 2) 假跌破 + 收回（reclaim）： // - 价格最低点刺破支撑（low < 支撑）， // - 但下穿幅度必须“浅”（用 ATR 倍数或固定点数限制）， // - 随后收盘重新站回支撑上方（close > 支撑）。 // 3) 回踩踩住确认（retest-hold）： // - 在收回之后的 N 根K内，价格回踩到支撑附近（low <= 支撑 + 容忍）， // - 且收盘守住支撑（close >= 支撑）， // - 满足则触发一次信号与提醒。 // // 关键参数说明： // - Max Penetration（最大下穿深度）：过滤掉“下穿太深”的破位，避免误触发。 // - Retest tolerance（回踩容忍范围）：定义回踩要贴近支撑到什么程度。 // - Confirm within N bars（确认窗口）：收回后限定多少根K内必须完成回踩确认。 // // 注意事项： // - Pivot 支撑位天然滞后（需要 pLen 根K确认后才成立），属于“稳但晚”的设计。 // - 该脚本是信号/提醒工具，不是完整的交易策略（不包含止损止盈与仓位管理）。
Pine Script® Indikator
von stsai1218
Nikhil TimezoneNikhil Timezone Indicator The Nikhil Timezone indicator is a time-based visual tool designed to help traders identify and analyze key intraday price behavior using Indian Standard Time (IST). 🔶 11:30–12:30 IST Body Range Zone Automatically highlights the candle body range formed between 11:30 AM and 12:30 PM IST. The zone is drawn using only open and close prices (not wicks), giving a clearer representation of real buying and selling pressure. The box dynamically expands during the session to capture the highest and lowest candle bodies within this time window. Useful for identifying midday consolidation, support/resistance zones, and potential breakout or rejection areas later in the session. 🔴 2:30 PM IST Candle Marker Marks the 2:30 PM IST candle with a vertical dotted red line. Adds a label for quick visual identification. Helpful for traders who track late-session momentum, institutional activity, or pre-close setups. 📈 Best Use Cases Intraday trading (especially index and liquid stocks) Breakout and range-expansion strategies Time-based market structure analysis IST-focused trading workflows This indicator is lightweight, non-repainting, and works seamlessly across intraday timeframes.
Pine Script® Indikator
von Jaiminseven
Rachev Regime AnalyzerRachev Regime Analyzer ~ GForge What It Does Measures the ratio of extreme gains to extreme losses to identify whether markets favor bulls or bears. When your best moves are bigger than your worst moves, conditions are bullish. When the opposite is true, conditions are bearish. Simple Interpretation: Ratio > 1.2 → Bullish regime (tail gains exceed tail losses) Ratio < 0.8 → Bearish regime (tail losses exceed tail gains) Between → Neutral/transitional Key Features Two Modes: Single Asset: Analyze current chart Multi-Asset: Aggregate regime across 5 assets with custom weights (great for gauging overall crypto/market conditions) Customizable: Lookback period (20-200 bars) Tail percentile (what counts as "extreme") Bullish/bearish thresholds 6 color schemes Optional MA smoothing Visual Signals: Buy/sell markers at threshold crosses Background regime coloring Info table with current values and confidence score Configurable alerts How to Use Choose lookback period based on your timeframe (40-60 bars is a good start) Watch for threshold crosses - these mark regime changes Check confidence score - higher = more reliable Use multi-asset mode to see if entire market is shifting (not just one coin) Best combined with: Trend indicators, support/resistance, volume analysis Parameters Lookback: More bars = smoother, less responsive Alpha (0.10): Defines extreme events - lower = more extreme Thresholds: Adjust based on asset volatility Return Type: Log returns recommended for most assets What Makes It Useful Unlike simple volatility measures, this shows asymmetry - whether extreme moves favor upside or downside. A ratio of 1.5 means your extreme gains are 50% larger than extreme losses - that's actionable information about risk-reward dynamics. Multi-asset aggregation is particularly powerful for crypto traders wanting to gauge if BTC, ETH, SOL, etc. are all showing similar regime characteristics. Disclaimer Educational tool only. Not financial advice. Use proper risk management. No indicator works in isolation - always consider broader market context. Developed by GForge Comments and feedback welcome! 👍
Pine Script® Indikator
von GForge
Hades - Tho TraderHello everyone, this indicator is built using EMA, SMA, Volume, and several other metrics to help you trade effectively across all markets with a minimum high win rate . It is compatible with multiple timeframes, though it performs best on M5 and M15—the two timeframes currently showing the highest success rates. The indicator comes with built-in TP/SL levels—all you need to do is follow the signals. Note: When using this indicator, you must strictly adhere to trading rules: only enter trades on valid signals, set TP/SL as instructed, and practice disciplined risk management. Never go 'all-in'.
Pine Script® Indikator
von Thotrader6868
CVD Zones & Divergence [Pro]# CVD Zones & Divergence **Complete CVD order flow toolkit** - Divergences, POC, Profile, and Supply/Demand zones all in one professional indicator. ## 🎯 What It Does Combines **four powerful order flow tools** into a single, cohesive indicator: 1. **CVD Divergences** - Early warnings + confirmed signals 2. **Point of Control (POC)** - Fair value equilibrium line 3. **CVD Profile** - Visual distribution histogram 4. **Supply/Demand Zones** - Real absorption-based S/R levels All based on **Cumulative Volume Delta (CVD)** - actual buying/selling pressure, not approximations. ## ✨ Key Features ### 🔄 CVD Divergences (Dual Mode) **Confirmed Divergences** (High Accuracy) - Solid lines (customizable colors) - 🔻 Bear / 🔺 Bull labels - Win rate: ~70-80% - Best for swing traders **Early Warning Mode** ⚡ (Fast Signals) - Dashed lines (default purple) - ⚠️ Early Bear / ⚠️ Early Bull labels - Fires 6+ bars earlier - Win rate: ~55-65% - Best for scalpers/day traders ### 🎯 Point of Control (POC) - **Independent lookback** (300 bars default) - Yellow line showing fair value - Where most CVD activity occurred - Acts as dynamic support/resistance - Resets and recalculates continuously ### 📊 CVD Profile Histogram - **Visual CVD distribution** over lookback period - **Split buy/sell** (blue/orange bars) - **Value Area** (70% CVD zone highlighted) - Position: Right/Left/Current (your choice) - Shows where actual order flow happened ### 📦 Supply/Demand Zones - **Absorption-based** detection (not guesses!) - Green = Demand (buyers absorbed 2:1+) - Red = Supply (sellers absorbed 2:1+) - Shows **real** institutional levels - Auto-sorted by strength - Displays top 8 zones ## 📊 What You See on Chart ``` Your Chart: ├─ 🔴 Red lines (bearish divergences) ├─ 🟢 Green lines (bullish divergences) ├─ 🟣 Purple dashed (early warnings) ├─ 🟡 Yellow POC line (fair value) ├─ 📊 Blue/Orange profile (right side) ├─ 🟢 Green boxes (demand zones) └─ 🔴 Red boxes (supply zones) ``` ## ⚙️ Recommended Settings ### 15m Day Trading (Most Popular) ``` 📊 Profile: - Lookback: 150 bars - Profile Rows: 24 - Position: Right 🎯 POC: - POC Lookback: 300 bars - Show POC: ON 📦 Zones: - Min Absorption Ratio: 2.0 - HVN Threshold: 1.5 - Max Zones: 8 🔄 Divergences: - Pivot L/R: 9 - Early Warning: ON - Early Right Bars: 3 - Min Bars Between: 40 - Min CVD Diff: 5% ``` ### 5m Scalping ``` Profile Lookback: 100 POC Lookback: 200 Pivot L/R: 7 Early Warning Right: 2 Min Bars Between: 60 ``` ### 1H Swing Trading ``` Profile Lookback: 200 POC Lookback: 400-500 Pivot L/R: 12-14 Early Warning Right: 4-5 Min Bars Between: 30 Min CVD Diff: 8% ``` ## 💡 How to Trade ### Setup 1: Divergence at Zone ⭐ (BEST - 75%+ win rate) **Entry:** - Price hits demand/supply zone - Divergence appears (early or confirmed) - Double confluence = high probability **Example (Long):** ``` 1. Price drops into green demand zone 2. ⚠️ Early bullish divergence fires 3. Enter long with tight stop below zone 4. Target: POC or next supply zone ``` **Risk/Reward:** 1:3 to 1:5 --- ### Setup 2: POC Bounce/Rejection **Entry:** - Price approaches POC line - Wait for reaction (bounce or rejection) - Enter in direction of reaction **Long Setup:** ``` 1. Price pulls back to POC from above 2. POC acts as support 3. Bullish divergence appears (confirmation) 4. Enter long, stop below POC ``` **Short Setup:** ``` 1. Price rallies to POC from below 2. POC acts as resistance 3. Bearish divergence appears 4. Enter short, stop above POC ``` **Risk/Reward:** 1:2 to 1:4 --- ### Setup 3: Zone + Profile Confluence **Entry:** - Supply/demand zone aligns with thick profile bar - Shows high CVD activity at that level - Triple confluence = very high probability **Example:** ``` 1. Supply zone at 26,100 2. Profile shows heavy selling at 26,100 3. Price rallies to 26,100 4. Bearish divergence appears 5. Enter short ``` **Risk/Reward:** 1:4 to 1:6 --- ### Setup 4: Early Warning Scalp ⚡ **Entry (Aggressive):** - ⚠️ Early warning fires - Price at zone or POC - Enter immediately - Tight stop (1-2 ATR) **Management:** ``` - Take 50% profit at 1:1 - Move stop to breakeven - 🔻 Confirmed signal → Trail stop - Exit rest at target ``` **Risk/Reward:** 1:1.5 to 1:2 **Trades/day:** 3-8 --- ### Setup 5: Multi-Timeframe (Advanced) **Confirmation Required:** ``` Higher TF (1H): - Confirmed divergence - At major POC or zone Lower TF (15m): - Early warning triggers - Entry with better timing ``` **Benefits:** - HTF gives direction - LTF gives entry - Best of both worlds **Risk/Reward:** 1:3 to 1:5 --- ## 📊 Component Details ### CVD Profile **What the colors mean:** - **Blue bars** = Buying CVD (demand) - **Orange bars** = Selling CVD (supply) - **Lighter shade** = Value Area (70% CVD) - **Thicker bar** = More volume at that price **How to use:** - Thick bars = Support/Resistance - Profile shape shows market structure - Balanced profile = range - Skewed profile = trend --- ### Supply/Demand Zones **How they're detected:** 1. High Volume Node (1.5x average) 2. CVD buy/sell ratio calculated 3. Ratio ≥ 2.0 → Zone created 4. Sorted by strength (top 8 shown) **Zone labels show:** - Type: "Demand" or "Supply" - Ratio: "2.8:1" = strength **Not like other indicators:** - ❌ Other tools use price action alone - ✅ This uses actual CVD absorption - Shows WHERE limit orders defended levels --- ### Point of Control (POC) **What it shows:** - Price with highest CVD activity - Market's "fair value" - Dynamic S/R level **How to use:** - Price above POC = bullish bias - Price below POC = bearish bias - POC retest = trading opportunity - POC cross = trend change signal **Independent lookback:** - Profile: 150 bars (short-term) - POC: 300 bars (longer-term context) - Gives stable, relevant POC --- ## 🔧 Settings Explained ### 📊 Profile Settings **Lookback Bars** (150 default) - How many bars for profile calculation - Lower = more recent, reactive - Higher = more historical, stable **Profile Rows** (24 default) - Granularity of distribution - Lower = coarser (faster) - Higher = finer detail (slower) **Profile Position** - Right: After current price - Left: Before lookback period - Current: At lookback start **Value Area** (70% default) - Highlights main CVD concentration - 70% is standard - Higher % = wider zone --- ### 🎯 POC Settings **POC Lookback** (300 default) - Independent from profile - Longer = more stable POC - Shorter = more reactive POC **Show POC Line/Label** - Toggle visibility - Customize color/width --- ### 📦 Zone Settings **Min Absorption Ratio** (2.0 default) - Buy/Sell threshold for zones - 2.0 = 2:1 ratio minimum - Higher = fewer, stronger zones **HVN Threshold** (1.5 default) - Volume must be 1.5x average - Higher = stricter filtering - Lower = more zones **Max Zones** (8 default) - Limits display clutter - Shows strongest N zones only --- ### 🔄 Divergence Settings **Pivot Left/Right** (9/9 default) - Bars to confirm pivot - Higher = slower, more confirmed - Lower = faster, less confirmed **Early Warning** - ON = Show early signals - Early Right Bars (3 default) - 3 = 6 bars faster than confirmed **Filters:** - Min Bars Between (40): Prevents spam - Min CVD Diff % (5): Filters weak signals **Visual:** - Line styles: Solid/Dashed/Dotted - Colors: Customize all 4 types - Labels: Toggle ON/OFF --- ## 🎨 Color Customization **Divergences:** - Bullish Confirmed: Green (default) - Bearish Confirmed: Red (default) - Early Bullish: Purple (default) - Early Bearish: Purple (default) **Zones & Profile:** - Bull/Demand: Green - Bear/Supply: Red - Buy CVD Profile: Blue - Sell CVD Profile: Orange - Value Area Up/Down: Lighter blue/orange **POC:** - POC Color: Yellow (default) All customizable to your preference! --- ## 🔔 Alerts Available **6 Alert Types:** 1. 🔻 Bearish Divergence (confirmed) 2. 🔺 Bullish Divergence (confirmed) 3. ⚠️ Early Bearish Warning 4. ⚠️ Early Bullish Warning 5. (Manual: POC cross) 6. (Manual: Zone touch) **Setup:** 1. Click Alert (⏰) 2. Choose "CVD Zones & Divergence" 3. Select alert type 4. Configure notification 5. Create! --- ## 💎 Pro Tips ### From Experienced Traders: **"Use zones with divergences for best setups"** - Zone alone: 60% win rate - Divergence alone: 65% win rate - Both together: 75%+ win rate **"POC is your friend"** - Price tends to revert to POC - Great target for counter-trend trades - POC cross = potential trend change **"Profile tells the story"** - Thick bars = institutional levels - Balanced profile = range-bound - Skewed high = distribution (top) - Skewed low = accumulation (bottom) **"Early warnings for entries, confirmed for confidence"** - Early = better entry price - Confirmed = validation - Use both in scale-in strategy **"Filter by timeframe"** - 1m-5m: Very fast, many signals - 15m: Sweet spot for most traders - 1H-4H: High quality, fewer signals --- ## 🔧 Tuning Guide ### Too Cluttered? **Simplify:** ``` ✅ Show Divergences: ON ✅ Show POC: ON ❌ Show Zones: OFF (or reduce to 4-5) ❌ Show Value Area: OFF ❌ Divergence Labels: OFF → Clean chart with just lines + POC ``` ### Missing Opportunities? **More Signals:** ``` ↓ Pivot Right: 6-7 ↓ Early Warning Right: 2 ↓ Min Bars Between: 25-30 ↓ Min CVD Diff: 2-3% ↓ Min Absorption Ratio: 1.8 ``` ### Too Many False Signals? **Stricter Filters:** ``` ↑ Pivot Right: 12-15 ↑ Min Bars Between: 60 ↑ Min CVD Diff: 8-10% ↑ Min Absorption Ratio: 2.5 ↓ Max Zones: 4-5 ``` ### POC Not Making Sense? **Adjust POC Lookback:** ``` If too high: Increase to 400-500 If too low: Increase to 400-500 If jumping around: Increase to 500+ → Longer lookback = more stable POC ``` --- ## ❓ FAQ **Q: Difference from CVD Divergence (standalone)?** A: This is the **complete package**: - Divergence tool = divergences only - This = divergences + POC + profile + zones - Use divergence tool for clean charts - Use this for full analysis **Q: Too slow/laggy?** A: Reduce computational load: ``` Profile Rows: 18 (from 24) Lookback: 100 (from 150) Max Zones: 5 (from 8) ``` **Q: No volume data error?** A: Symbol has no volume - Works: Futures, stocks, crypto - Maybe: Forex (broker-dependent) - Doesn't work: Some forex pairs **Q: Can I use just some features?** A: Absolutely! Toggle what you want: ``` Zones only: Turn off divergences + POC POC only: Turn off zones + divergences Divergences only: Turn off zones + POC + profile Mix and match as needed! ``` **Q: Best timeframe?** A: - **1m-5m**: Scalping (busy, many signals) - **15m**: Day trading ⭐ (recommended) - **1H-4H**: Swing trading (quality signals) - **Daily**: Position trading (very selective) **Q: Works on crypto/forex/stocks?** A: - ✅ Futures: Excellent - ✅ Stocks: Excellent - ✅ Crypto: Very good (major pairs) - ⚠️ Forex: Depends on broker volume --- ## 📈 Performance Expectations ### Realistic Win Rates | Strategy | Win Rate | Avg R/R | Trades/Week | |----------|----------|---------|-------------| | Early warnings only | 55-65% | 1:1.5 | 15-30 | | Confirmed only | 70-80% | 1:2 | 8-15 | | Divergence + Zone | 75-85% | 1:3 | 5-12 | | Full confluence (all 4) | 80-90% | 1:4+ | 3-8 | **Keys to success:** - Don't trade every signal - Wait for confluence - Proper risk management - Trade what you see, not what you think --- ## 🚀 Quick Start **New User (5 minutes):** 1. ✅ Add to 15m chart 2. ✅ Default settings work well 3. ✅ Watch for 1 week (don't trade yet!) 4. ✅ Note which setups work best 5. ✅ Backtest on 50+ signals 6. ✅ Start with small size 7. ✅ Scale up slowly **First Trade Checklist:** - Divergence + Zone/POC = confluence - Clear S/R level nearby - Risk/reward minimum 1:2 - Position size = 1% risk max - Stop loss placed - Target identified - Journal entry ready --- ## 📊 What Makes This Special? **Most indicators:** - Use RSI/MACD divergences (lagging) - Guess at S/R zones (subjective) - Don't show actual order flow **This indicator:** - Uses real CVD (actual volume delta) - Absorption-based zones (real orders) - Profile shows distribution (real activity) - POC shows equilibrium (real fair value) - All from one data source (coherent) **Result:** - Everything aligns - No conflicting signals - True order flow analysis - Professional-grade toolkit --- ## 🎯 Trading Philosophy **Remember:** - Indicator shows you WHERE to look - YOU decide whether to trade - Quality over quantity always - Risk management is #1 - Patience beats aggression **Best trades have:** - ✅ Multiple confluences - ✅ Clear risk/reward - ✅ Obvious invalidation point - ✅ Aligned with trend/context **Worst trades have:** - ❌ Single signal only - ❌ Poor location (middle of nowhere) - ❌ Unclear stop placement - ❌ Counter to all context --- ## ⚠️ Risk Disclaimer **Important:** - Past performance ≠ future results - All trading involves risk - Only risk what you can afford to lose - This is a tool, not financial advice - Use proper position sizing - Keep a trading journal - Consider professional advice **Your responsibility:** - Which setups to trade - Position size - Entry/exit timing - Risk management - Emotional control **Success = Tool + Strategy + Discipline + Risk Management** --- ## 📝 Version History **v1.0** - Current Release - CVD divergences (confirmed + early warning) - Point of Control (independent lookback) - CVD profile histogram - Supply/demand absorption zones - Value area visualization - 6 alert types - Full customization --- ## 💬 Community **Questions?** Drop a comment below **Success story?** Share with the community **Feature request?** Let me know **Bug report?** Provide details in comments --- **Happy Trading! 🚀📊** *Professional order flow analysis in one indicator.* **Like this?** ⭐ Follow for more quality tools!
Pine Script® Indikator
von kb1ath