Auf geht's

Trendanalyse

Trend Forge Trend Forge is a fully configurable multi-trend strategy that lets you mix and match three independent trend indicators to define bullish and bearish market states. When all three trends align above price, the strategy enters long; when all three align below, it enters short. Every position is protected by an ATR-based stop loss, and trades close automatically when the trend alignment breaks down. This script was converted from the original Bear & Bull Builder indicator I published into a back testable strategy with real entries, exits, and stop loss orders. It gives you access to TradingView's full Strategy Tester including equity curves, trade lists, and performance metrics. How It Works Trend Selection: You choose three trend indicators independently, each with its own type and length: - Trend 1 (default: EMA 21) — fast trend - Trend 2 (default: EMA 55) — medium trend - Trend 3 (default: SMA 89) — slow trend Each trend slot supports five indicator types: EMA, SMA, RSI, CCI, and WaveTrend (WT). This gives you complete freedom to build a trend-following system tailored to your instrument and timeframe. Entry Logic Long Entry: Triggered on the first confirmed bar where price closes above all three trend values. The strategy enters long at market and simultaneously places an ATR-based stop loss order. Short Entry: Triggered on the first confirmed bar where price closes below all three trend values. The strategy enters short at market with an ATR-based stop loss. Stop Loss Calculation The stop loss distance is calculated as: `Stop Loss Distance = ATR(20) × Multiplier` - For longs, the stop is placed below the highest of the three trend values at entry. - For shorts, the stop is placed above the lowest of the three trend values at entry. The ATR multiplier is user-adjustable (default: 2.5), letting you widen or tighten risk per trade based on volatility. Exit Logic Positions close via market order when the trend alignment condition that triggered the entry is no longer met — i.e., when price crosses back through one or more of the trend lines. If the stop loss is hit first, the strategy exits at the stop price instead. --- Visual Features All of the original indicator's visual overlays are preserved: -Stop Loss Zones — shaded red regions between the entry level and the ATR stop loss, shown for longs and/or shorts (toggle on/off). - Trend Zones — green-shaded areas that highlight when a bullish or bearish state is active. - Signal-to-Order Fill Zones — a green zone that visualizes the one-bar delay between signal generation (bar close confirmation) and order execution (next bar open). - Entry, Stop, and Exit Labels — price labels printed on the chart at entry, stop loss, and exit points with color coding (green = entry, orange = stop, cyan = exit). Toggleable for longs and shorts independently. --- Settings Reference | Group | Setting | Default | Description | |-------|---------|---------|-------------| | First Trend** | Trend Type | EMA | Indicator type for Trend 1 | | First Trend** | Trend Length | 21 | Lookback period for Trend 1 | | Second Trend | Trend 2 | EMA | Indicator type for Trend 2 | | Second Trend | Trend Length | 55 | Lookback period for Trend 2 | | Third Trend | Trend 3 | SMA | Indicator type for Trend 3 | | Third Trend| Trend Length | 89 | Lookback period for Trend 3 | | Stop Loss | ATR Multiplier | 2.5 | Multiplied by ATR(20) to set stop distance | | Display | Long/Short Labels | Long on | Show entry, stop, and exit price labels | | Display| Stop Loss Zones | Long on | Shade the region between entry and stop | | Display | Trend Zones | Long on | Shade active bull/bear trend areas | | Display | Signal-to-Order Zones | Long on | Show the fill delay visualization | --- Strategy Properties | Property | Value | |----------|-------| | Default Qty Type | 100% of equity | | Initial Capital | 10,000 | | Pyramiding | 0 (no stacking) | | Order Fill | Next bar open | | Bar Confirmation | Orders only on confirmed bars | --- Usage Tips - Start with the default EMA 21 / EMA 55 / SMA 89 combination and adjust from there. - Pair faster trend lengths for scalping on lower timeframes, or slower lengths for swing trading on daily/weekly charts. - Increase the ATR multiplier on volatile instruments to avoid premature stop outs; decrease it on stable instruments for tighter risk control. - Use the Strategy Tester tab to compare different trend type and length combinations across your chosen symbol and timeframe. - The WaveTrend and CCI options can provide earlier signals in ranging markets but may generate more whipsaws — backtest before committing. --- Disclaimer This strategy is provided for educational and backtesting purposes only. Past performance does not guarantee future results. Always validate with out-of-sample data and proper risk management before trading live capital.
Pine Script® Strategie
von Beck_Mullen
MASU+ Institutional v4.5+MASU+ Institutional v4.5 Overview MASU+ Institutional v4.5+ is the refined, open-source version of our classic trend-following strategy. It is designed for traders who want a robust, "set-and-forget" algorithmic assistant that combines Institutional Moving Average Ribbons with Smart Money Concepts (SMC). Unlike the complex v7 execution engine (Invite-Only), this v4.5+ version focuses on pure Trend Alignment & Structural Clarity. It is cleaner, faster, and visually optimized for daily market analysis. Key Features in v4 Final 1. Institutional MA Ribbon Engine Logic: Instead of complex kernels, v4.5+ uses a classic 8-EMA Ribbon. Signal: Buying pressure is confirmed only when the ribbon fully aligns (Green Expansion). Selling pressure is confirmed on Red Expansion. Why it works: It filters out 90% of sideways chop, keeping you out of bad trades during low-volume hours. 2. Smart Money Structure (SMC) Auto-BOS: Automatically detects Break of Structure to confirm trend validity. Liquidity Sweeps: Marks "Liquidity Grabs" (LIQ X) where price traps retail traders. Demand & Supply Zones: Dynamically plots unfilled order blocks (Blue/Orange boxes) that act as magnets for price. 3. Volatility & Order Flow Volume Pressure: Analyzes buying vs. selling volume within each candle. Regime Detection: Filters trades based on ADX and BB Width (Trending vs. Ranging). 4. Institutional Dashboard Live Scanner: A comprehensive panel showing Trend Status (15m, 1H, 4H), Risk/Reward metrics, and active signals in real-time. Strategy Logic (How it Trades) This strategy executes a trade only when a High-Confluence Setup occurs: Trend: 15m, 1H, and 4H trends must align. Structure: Price must break structure (BOS) or bounce from a Demand Zone. Volume: Order Flow must confirm the move (Green Volume Pressure). Exit Logic: Take Profit: Fixed 3.0x ATR target. Stop Loss: Fixed 2.0x ATR protection. Trailing Stop: Activates to lock in profits during strong trends. ⚠️ v4.5+ vs. v7 (Comparison) v4.5+ (This Script): ✅ Free & Open Source ✅ Classic MA Ribbon Logic ✅ Standard Risk Management (Fixed SL/TP) ❌ No Equity Guard (Account Protection) ❌ No BOS-Confirmed Execution (Instant Entry) ❌ No Neural Network (AI) v7 (Invite-Only): 🚀 Nadaraya-Watson Kernel (Adaptive) 🚀 ELM Neural Network (AI Filter) 🚀 BOS-Confirmed Entries (Scalping Module) 🚀 Equity Guard (Drawdown Protection) 🚀 Cost-Aware Filtering (Spread Protection) Recommended Settings Timeframe: 1Н Assets: XAUUSD, EURUSD, BTCUSD, US30. Risk: Defaults to Kelly Criterion sizing, but you can adjust to Fixed % in settings. Clean code. Clear signals. Institutional logic.
Pine Script® Strategie
von Mark_Novak
Volume-Based Moving AverageTitle: Volume-Based Moving Average Description: The Volume-Based Moving Average is a versatile tool that calculates price averages based on cumulative traded volume, highlighting the price levels where significant market participation has occurred. By combining volume-weighted averages with slope confirmation, it helps traders detect trending conditions and potential reversals in real time. Key Features: • Volume- Based Average: Computes moving averages based on a volume-period lookback. • Multi-Source Flexibility: Supports different price inputs, including Close, HL2, HLC3, OHLC4, or High & Low, giving traders control over calculation style. • Slope Confirmation: Detects sustained upward or downward trends by confirming slope direction over multiple bars, reducing noise from short-term fluctuations. • Dynamic Coloring: Average lines change color based on trend direction, providing instant visual cues for bullish or bearish momentum. Inputs & Settings: • Target Volume for cumulative calculation • Price Source options (Close, HL2, HLC3, OHLC4, High & Low) • Slope Confirmation Bars to determine sustained trend direction • Color customization based on trend slope Usage: This indicator helps traders: • Identify key price levels supported by high trading volume • Spot emerging bullish or bearish trends based on slope confirmation • Filter out short-term noise in fast-moving markets • Enhance trend-following or volume-based trading strategies • Explore the market from a new, original perspective How to Calibrate: 1. Open your preferred trading timeframe 2. Use the following volume amounts to get a ballpark estimate for your trading speed: 1,000,000; 500,000; 250,000; 100,000; 50,000; 25,000; 10,000; 5,000 3. Adjust to personal preference. Technical Notes: • If the moving average does not adjust and is anchored to candles, the broker you are using may not be providing the volume data needed for this to work. Try switching to a different broker for your instrument. • If the moving average does not show at all, your volume input needs to be reduced (depends on amount of loopback data your broker provides. Again, you may need to check out a different broker if this issue occurs. • Designed for standard OHLC charts; non-standard chart types may produce inconsistent results. • Past signals do not guarantee future market behavior; always combine with proper risk management. • Experiment with volume calibration before using in live trades.
Pine Script® Indikator
von The_Forex_Steward
Standard Deviation Supertrend | GForgeStandard Deviation Supertrend ~ 𝒢𝐹𝑜𝓇𝑔𝑒 A Supertrend indicator that replaces ATR with Standard Deviation for volatility measurement, combined with a selectable Moving Average anchor for noise reduction. ━━━━━━━━━━━━━━━━━━━━━━━━ What This Indicator Does This is a trend-following overlay that plots a single trailing line on your chart. When price is above the line, the trend is bullish. When price crosses below, the trend flips bearish. Signals fire on each flip. The core mechanic is identical to the classic Supertrend — ratcheting bands that tighten in the direction of the trend and only reset when price breaks through the opposite side. ━━━━━━━━━━━━━━━━━━━━━━━━ Why Standard Deviation Instead of ATR ATR measures the average candle range. It treats all bars the same — a strong directional candle and a choppy gap produce equal ATR contributions. Standard Deviation measures how far price disperses from its mean. During clean directional moves, prices cluster on one side of the mean, producing low StdDev and tighter bands. During erratic, sideways price action, prices scatter around the mean, producing high StdDev and wider bands. The result: the trailing stop naturally tightens when the trend is clean and loosens when conditions are noisy. This is adaptive behavior that ATR-based Supertrends don't provide. ━━━━━━━━━━━━━━━━━━━━━━━━ Two Smoothing Layers Raw Supertrend inputs can be noisy. A single wick or volatile candle can jerk the trailing band and cause a premature flip. This indicator addresses that with two optional smoothing layers: Anchor MA — applies a Moving Average to the price source before bands are calculated. Instead of building bands around raw hl2 (which reacts to every wick), the bands are built around a smoother baseline. 11 MA types are available: • None (hl2) — raw, classic Supertrend behavior • SMA, EMA, WMA — standard options with varying lag • HMA — very low lag, can overshoot on reversals • DEMA, TEMA — reduced lag variants of EMA • VWMA — volume-weighted, naturally anchors to high-volume levels • RMA — Wilder's smoothing, very stable • ALMA — Gaussian-weighted with tunable offset and sigma • T3 — Tillson, extremely smooth with adjustable volume factor StdDev Smoothing — applies an EMA to the raw Standard Deviation output before it scales the bands. This prevents abrupt band width changes when a volatile bar enters or exits the lookback window. Set to 1 to disable. Together, these improve parameter robustness — small changes to settings produce smaller changes in output, meaning the indicator is less likely to break under slight parameter variation. ━━━━━━━━━━━━━━━━━━━━━━━━ Settings Overview • Anchor Source — price input for the Supertrend. hl2 is the classic default. • StdDev Length — lookback period for the Standard Deviation calculation. • StdDev Multiplier — band width. Higher values require a larger move to flip direction. This serves the same purpose as a "threshold" in oscillator-based indicators. • Anchor MA Type / Length — which Moving Average smooths the anchor, and its period. • StdDev Smoothing — EMA period applied to the raw StdDev. 1 = no smoothing. • ALMA Offset / Sigma — only active when ALMA is selected. • T3 Volume Factor — only active when T3 is selected. • Current settings work best on BTC 1D ━━━━━━━━━━━━━━━━━━━━━━━━ Visual Elements • Glow trail — the Supertrend line pulses with a layered glow that changes color on trend direction. • Trend fill — gradient fill between price and the trailing line. • Inactive band — shown as crosses, marking where the opposite flip point sits. • Anchor MA line — subtle reference line showing the smoothed anchor (hidden when set to None). • Bar coloring — candles colored by current trend direction. • Signal diamonds — dual-layer markers (halo + core) on trend flips. All visual elements can be toggled on or off individually. 13 color themes are included. ━━━━━━━━━━━━━━━━━━━━━━━━ ⚠️ Disclaimer This indicator is a technical analysis tool, not financial advice. It does not guarantee profitable results. Past performance on any asset or timeframe does not indicate future results. No indicator can predict market direction with certainty. Always use proper risk management. Do not rely on any single indicator for trading decisions. Test thoroughly on your chosen instruments and timeframes before applying to live markets. You are solely responsible for your own trading decisions and outcomes. ━━━━━━━━━━━━━━━━━━━━━━━━ Developed by 𝒢𝐹𝑜𝓇𝑔𝑒
Pine Script® Indikator
von GForge
EDGE ATLAS WHAT IS EDGE ATLAS? EDGE ATLAS is a multi-factor market environment scanner. It does not generate buy or sell signals. Instead, it answers a more fundamental question that most traders skip entirely: "Is this a good environment to trade right now — and if so, what type of strategy fits these conditions?" The indicator fuses four independent market dimensions into a single composite EDGE Score (0–100), assigns a letter grade (A through F), classifies the current regime (TREND, RANGE, or NEUTRAL), determines directional bias, and recommends a strategy type — all displayed in a compact, repositionable HUD overlay. Most indicators measure one thing. A moving average measures trend. Bollinger Bands measure volatility. Volume indicators measure participation. Each one gives you a single dimension of a multi-dimensional problem. EDGE ATLAS combines all four dimensions simultaneously so you can see the full picture before committing capital. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ THE SCORING MODEL — HOW THE EDGE SCORE IS CALCULATED The EDGE Score is a weighted composite of four independent measurements. Each component is normalized to a 0–1 scale before weighting, ensuring that no single dimension can dominate the final score regardless of instrument or timeframe. COMPONENT 1 — PLAY EDGE (45% of total score) This is the largest component because it answers the most important question: is there a strong, tradeable pattern right now? The indicator calculates two separate edge measurements and takes the larger of the two: Play Edge = max(Trend Strength, Range Fade Edge) This dual-path design means the score remains high whenever ANY strong play exists — whether the market is trending cleanly or sitting at a mean-reversion extreme. Trend Strength is itself a three-factor composite: Trend Strength = 0.45 x Efficiency Ratio + 0.35 x ADX (normalized) + 0.20 x Slope Magnitude - Efficiency Ratio (Kaufman): Measures directional efficiency of price movement over N bars. A value of 1.0 means price moved in a perfectly straight line. A value near 0 means price went nowhere despite lots of bar-to-bar movement. This is the core chop filter. - ADX (normalized): The classic Wilder Average Directional Index, normalized to a 0–1 scale where ADX below 15 maps to 0 and ADX above 35 maps to 1. Measures the strength of any directional movement regardless of direction. - Slope Magnitude: The absolute slope of the Anchor EMA, normalized by ATR. This captures how aggressively the trend center-of-gravity is moving. A flat EMA produces 0. A steeply angled EMA produces values approaching 1. Range Fade Edge measures mean-reversion opportunity: Range Fade Edge = (1 - Trend Strength) x Deviation Edge Deviation Edge activates when price deviates from the Anchor EMA by more than the ATR deviation threshold (default: 0.90 ATR). The further price stretches beyond that threshold, the higher the Range Fade Edge becomes — but only when Trend Strength is LOW. This prevents the indicator from suggesting mean-reversion trades during a strong trend. WHY THREE SUB-FACTORS FOR TREND? Using a single trend indicator creates fragility. ADX can stay high during volatile chop. Efficiency Ratio can briefly spike during a single large candle. EMA slope can lag during fast reversals. By combining all three with different weights, the Trend Strength reading becomes robust against the failure mode of any single measurement. When all three agree, you have genuine trend conviction. When they diverge, the score drops — which is exactly what should happen in ambiguous conditions. COMPONENT 2 — VOLATILITY QUALITY (20% of total score) Not all volatility is equal. This component measures whether current volatility is in a "tradeable" range by comparing the current ATR against a long-run ATR baseline (100-period EMA of ATR by default). The scoring curve works as follows: - ATR is 70%–160% of baseline: Score = 1.0 (normal, healthy volatility) - ATR is below 70% of baseline: Score decreases linearly (compressed, pre-breakout — unpredictable) - ATR is above 160% of baseline: Score decreases inversely (expanded, chaotic — hard to manage risk) This reflects a practical reality: compressed volatility often precedes explosive moves where stops get blown, and extreme volatility makes position sizing and stop placement unreliable. The best trading environments have active but not extreme price movement. COMPONENT 3 — PARTICIPATION (20% of total score) Current volume divided by its moving average, clamped to a 0–1 scale. A ratio of 2.0 (double the average volume) maps to a perfect score of 1.0. Average volume maps to 0.5. Below-average volume maps below 0.5. Higher participation means the current price action is backed by real market activity rather than thin-market noise. Breakouts on high volume are more likely to follow through. Trends on declining volume are more likely to fail. This component captures that dynamic. NO-VOLUME HANDLING: On instruments where volume data is unavailable (forex pairs, some indices, certain data feeds), this component automatically defaults to a neutral 0.5 score and the HUD displays "N/A" in the Participation row. This prevents false score inflation or deflation on symbols where volume simply does not exist. COMPONENT 4 — MEAN PROXIMITY (15% of total score) Calculated as: Mean Proximity = 1 / (1 + |deviation from EMA in ATR units|) This produces a smooth decay curve: price sitting exactly on the EMA scores 1.0. Price one ATR away scores 0.5. Price two ATRs away scores 0.33. And so on. This component serves a specific purpose within TREND regimes: it rewards entries that are close to the trend's center of gravity (the EMA) where risk/reward is most favorable, rather than entries at extended prices where a pullback is statistically overdue. Note that this component has the LOWEST weight (15%) by design, and it works in counterbalance with the Range Fade Edge in the Play Edge component. When price is far from the EMA, Mean Proximity decreases — but if the regime is RANGE, Range Fade Edge increases. The two effects partially offset each other, which is intentional. The net result is that the total score captures whether the current distance from the mean represents opportunity (range fade) or risk (overextended trend entry). FINAL SCORE ASSEMBLY: EDGE Score = 100 x (0.45 x Play Edge + 0.20 x Volatility Quality + 0.20 x Participation + 0.15 x Mean Proximity) The result is an integer from 0 to 100. Higher is better. The score does not predict direction — it measures environment quality. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ GRADING SCALE A (score 80 or above) — Exceptional environment. Multiple dimensions are aligned. High conviction. B (score 65–79) — Good environment. Most dimensions are favorable. Standard risk is appropriate. C (score 50–64) — Marginal. Some dimensions are favorable but others are not. Reduce exposure or be very selective. D (score 35–49) — Poor. Most dimensions are unfavorable. The odds are not in your favor. F (score below 35) — No detectable edge. Conditions are choppy, illiquid, or chaotic. The recommended action is to do nothing. All grade thresholds are adjustable in settings to match your personal risk tolerance. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ REGIME CLASSIFICATION The TrendScore (the Trend Strength component described above) is compared against two thresholds to classify the market into one of three regimes: TREND — TrendScore exceeds the upper threshold (default: 0.65). Price is moving efficiently in one direction with confirming momentum. The indicator assigns directional bias by following the slope of the Anchor EMA: upward slope = LONG bias, downward slope = SHORT bias. RANGE — TrendScore falls below the lower threshold (default: 0.35). Price movement is choppy and non-directional. The indicator assigns directional bias ONLY when price has deviated beyond the ATR deviation threshold from the Anchor EMA, and the bias points BACK toward the EMA (mean reversion). If price is ranging but near the EMA, no bias is assigned because there is no mean-reversion edge yet. NEUTRAL — TrendScore is between the two thresholds. The market is in transition — potentially shifting from trend to range or vice versa. No directional bias is assigned. The recommended action is to wait for clarity. The gap between the TREND and RANGE thresholds creates a deliberate dead zone. This is a feature, not a limitation. Markets spend significant time in transitional states where neither trend-following nor mean-reversion strategies perform well. The NEUTRAL classification prevents the indicator from forcing a read on ambiguous conditions. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ STRATEGY RECOMMENDATIONS Based on the current grade and regime, the HUD displays one of six strategy suggestions: A or B + TREND + LONG bias : MOMENTUM LONG — Conditions favor trend-following on the long side A or B + TREND + SHORT bias : MOMENTUM SHORT — Conditions favor trend-following on the short side A or B + RANGE + LONG bias : MEAN REV LONG — Conditions favor buying the dip back toward the mean A or B + RANGE + SHORT bias : MEAN REV SHORT — Conditions favor selling the rally back toward the mean A or B + no bias : WAIT FOR BIAS — Environment is good but no directional edge yet C grade : REDUCE SIZE — Marginal conditions; if you trade, trade small D or F grade : SIT OUT — Conditions do not support any strategy type These recommendations tell you WHAT TYPE of strategy fits the current environment. They do not tell you WHERE to enter, where to place stops, or when to exit. Those decisions remain yours. The value of EDGE ATLAS is in filtering out the environments where your strategies are statistically unlikely to perform, regardless of how good the individual setup looks. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ THE HUD DASHBOARD The overlay table displays eight rows of information organized into two tiers: PRIMARY (what to act on): Header row — Score (0–100) and letter grade, color-coded from green (A) to red (F) Regime — TREND / RANGE / NEUTRAL with regime-appropriate background color Bias — Directional arrow (up/down) or dash for no bias Play — The specific directional play in plain language Strategy — Actionable recommendation with color-coded background TRANSPARENCY (why the score is what it is): Trend — TrendScore sub-component (0.00 to 1.00) Vol Q — Volatility Quality sub-component (0.00 to 1.00) Partic — Participation sub-component (0.00 to 1.00, or N/A if volume unavailable) The transparency tier is what makes EDGE ATLAS a learning tool, not a black box. When the score drops from B to D, you can immediately see which dimension degraded. Did the trend weaken? Did volume dry up? Did volatility spike to abnormal levels? This feedback loop teaches you to read market structure over time, not just follow a number. HUD customization: - Repositionable to any of 6 screen positions (all four corners plus middle-left and middle-right) - Three text sizes (Tiny, Small, Normal) to fit any monitor and chart layout - Fully toggleable — hide the HUD entirely if you prefer only the background tint or badge ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ADDITIONAL VISUAL FEATURES Background Tint — A subtle color wash behind candles reflecting the current regime and bias. Green tones for bullish trend, red tones for bearish trend, blue tones for range with long bias, orange tones for range with short bias, neutral gray for no bias. This gives you instant visual context without adding any lines or shapes to the chart. Toggleable in settings. Candle Tint — Colors candles by directional bias. Off by default to keep charts clean. Enable it when you want bias direction visible at a glance without reading the HUD. Last-Bar Badge — A floating label positioned on the most recent bar showing the grade, regime, direction arrow, and score in a compact format. Automatically positions above candles for long bias, below candles for short bias. Toggleable. Anchor EMA — The EMA line used internally for all regime and deviation calculations. Hidden by default because the indicator's value is in the composite analysis, not the moving average itself. Enable it if you want to visually confirm where the "center of gravity" sits. Data Window Output — The raw EDGE Score is exposed as a plot in TradingView's Data Window. This means other Pine scripts can reference it as a source input, enabling you to build strategies or additional indicators that use the EDGE Score as a filter. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ALERTS Seven built-in alert conditions cover all major state changes: Regime Change — Fires when the market shifts between TREND, RANGE, and NEUTRAL Trend Long — New momentum long setup detected (regime shifted to TREND with upward bias) Trend Short — New momentum short setup detected (regime shifted to TREND with downward bias) Fade Long — New mean-reversion long setup detected (RANGE regime, price stretched below mean) Fade Short — New mean-reversion short setup detected (RANGE regime, price stretched above mean) Upgraded to A — Score crossed above the A-grade threshold Grade Below C — Score dropped below the C-grade threshold (risk-off warning) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SETTINGS REFERENCE Core Settings: - Source: Price source for calculations. Default is close. HL2 or HLC3 reduces noise on volatile instruments. - Anchor EMA Length (default 50): The central moving average used for regime detection, slope measurement, and deviation calculation. Use shorter values (20–30) for day trading, 50 for swing trading, 100+ for position trading. - ATR Length (default 14): Standard Wilder ATR period. Normalizes all measurements so the indicator works identically across instruments with different price magnitudes. - Volume MA Length (default 20): Baseline for the participation ratio. Current volume is compared against this moving average. Regime Detection: - Efficiency Ratio Length (default 20): Lookback for the Kaufman ER. Shorter values react faster to regime changes but produce more noise. - ADX Length (default 14): Wilder ADX smoothing period. Higher values produce a more stable reading. - ATR Baseline Length (default 100): Long-run volatility reference for the Volatility Quality component. - TREND Threshold (default 0.65): TrendScore must exceed this to classify as TREND. Raise for stricter detection. - RANGE Threshold (default 0.35): TrendScore must fall below this to classify as RANGE. Lower for stricter detection. - Deviation Threshold (default 0.90 ATR): Minimum distance from the EMA before range bias activates. Raise to only fade extreme deviations. Grading Scale: - A/B/C thresholds are fully adjustable. The D threshold is fixed at 35. Below 35 is always F. Visual Settings: - Toggle each visual element independently (HUD, background, candles, badge, EMA) - Reposition HUD to 6 screen locations - Scale HUD text across 3 sizes ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW TO USE THIS — PRACTICAL WORKFLOWS For Beginners: 1. Add EDGE ATLAS to your chart. 2. Look at the grade. If it says A or B, the market is in a good state for trading. If it says D or F, close the chart and come back later. This single habit will eliminate a large percentage of losing trades that come from forcing setups in hostile environments. 3. Read the Strategy row. It will tell you whether to look for momentum (trend-following) or mean-reversion (fade) setups, and in which direction. Do not look for momentum setups when it says MEAN REV, and do not try to pick tops/bottoms when it says MOMENTUM. For Intermediate Traders: 1. Use the regime classification to match your strategy type. If you have a breakout strategy, only deploy it during TREND regimes. If you have a support/resistance bounce strategy, only deploy it during RANGE regimes. Track your win rate in each regime separately — the difference will be significant. 2. Use the sub-scores as early warning. When the Trend sub-score starts declining from 0.80 toward 0.50, the trend is weakening BEFORE the regime officially shifts. This gives you time to tighten stops or take partial profits. 3. Set alerts for grade changes. An "Upgraded to A" alert on your watchlist symbols tells you where the best environments are forming. A "Grade Below C" alert on open positions warns you that conditions are deteriorating. For Advanced / Quantitative Traders: 1. Reference the EDGE Score from the Data Window as a source input in your own strategies. Use it as a position-sizing multiplier: full size on A-grade, half size on C-grade, flat on F-grade. 2. Backtest your existing strategy with and without the regime filter. Run your entries only when EDGE ATLAS shows the matching regime (TREND entries only in TREND, mean-reversion entries only in RANGE) and compare the equity curve. 3. Examine the individual sub-scores to build more granular filters. For example, you might find that your specific strategy performs best when Trend > 0.70 AND Participation > 0.60, regardless of the other components. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ IMPORTANT DISCLAIMERS - This indicator does NOT repaint. All calculations use confirmed bar data. No future data is referenced. - This is NOT a signal generator. It does not tell you when to buy or sell. It tells you whether the current environment supports trading and what type of strategy is appropriate. Entry and exit decisions remain entirely yours. - Works on all instruments (stocks, forex, crypto, futures, indices) and all timeframes. Automatically adapts to instruments without volume data. - The scoring weights (45/20/20/15) are derived from established quantitative principles and are not curve-fitted to any specific market, symbol, or time period. - Past performance of any scoring system does not guarantee future results. Always use proper risk management regardless of the indicated grade.
Pine Script® Indikator
von Finntech1
GH-alerts Tops/BottomsGH-Alerts Tops/Bottoms GH-Alerts Tops/Bottoms is a volatility-adjusted mean reversion signal designed to identify potential short-term exhaustion points in price. The script uses a normalized deviation formula similar to a CVI-style calculation: CVI = (Close − SMA(HL2)) / (ATR-based volatility adjustment) This allows price extremes to be measured relative to current volatility conditions rather than fixed distance thresholds. How It Works • A moving average of HL2 defines short-term value • ATR is smoothed to create a volatility-adjusted denominator • Price deviation is normalized using the square root of the lookback length • Custom bullish and bearish thresholds define extreme conditions When price moves beyond a defined extreme and then exits that condition, a * is plotted on the chart: Green star below bar → Price exited a bullish extreme (potential bottom) Red star above bar → Price exited a bearish extreme (potential top) Alert Logic Alerts trigger exactly when the star appears, meaning: The market was previously in an extreme condition The current bar closes back inside the threshold Available alerts: Bullish Star Bearish Star Combined Star Alert For best consistency, set alerts to Once Per Bar Close. Inputs Length – Controls smoothing and normalization period Bullish Threshold – Lower deviation boundary Bearish Threshold – Upper deviation boundary Adjust thresholds to fit instrument volatility and timeframe. Best Used For • Identifying short-term exhaustion • Fade setups in balanced conditions • Confluence with order flow or structure • Spotting potential pullback completion This tool does not predict reversals — it highlights when statistically stretched conditions normalize.
Pine Script® Indikator
von samb817
2
Hidden Markov Model Market Regimes [LuxAlgo]The Hidden Markov Model Market Regimes tool provides a probabilistic framework for identifying the current state of the market by applying a Hidden Markov Model (HMM) to price action and volatility data. 🔶 USAGE The indicator identifies four distinct market regimes. Each regime is represented by a unique color, and the oscillator values (0-100%) represent the probability of the market being in that specific state. 🔹 Regime Breakdown & Trading Implications Low Volatility Trend (Gray): Characterized by steady, consistent returns with minimal price swings. Ideal for trend-following strategies and "buy-and-hold" positions. High Volatility Chop (Orange): Large price swings without a clear directional trend. Suggests a "risk-off" environment or mean-reversion strategies. Crash Regime (Red): Extreme negative returns coupled with a spike in volatility. Indicates high panic; traders may look for hedging opportunities. Accumulation (Blue): Low volatility with neutral-to-rounding price action. Often occurs at the end of a bear cycle, signaling a potential "bottom-fishing" zone. 🔹 Visual Cues The indicator features background highlighting that changes based on the "Dominant State" (the state with the highest current probability). When a specific probability line crosses above the 50% "Neutral" line, the model is gaining conviction. Crosses above 80% indicate "High Confidence" in that regime. Users should watch for "probability flips," where one regime's dominance is rapidly overtaken by another, signaling a structural shift in the market. 🔶 DETAILS The script implements a specialized version of the Forward Algorithm to estimate the likelihood of hidden states. 🔹 Heuristic vs. Trained ML It is important to note that this indicator is accurately described as a "Heuristic" or "Static" HMM rather than a traditional Machine Learning model. Unlike modern ML models that require extensive training on historical datasets (using algorithms like Baum-Welch or Expectation-Maximization), this model uses fixed mathematical parameters and predefined heuristic-based emission profiles. This approach ensures deterministic behavior—the model will always react to the same price patterns in the same way—and eliminates the "black box" nature of traditional ML while still providing the probabilistic benefits of a Markov chain. 🔹 Mathematical Logic Log Returns: The model utilizes log returns ( TSX:LN (Close_{t} / Close_{t-1})$) rather than simple percentage changes to ensure time-additivity and a more symmetric distribution of data. Emission Likelihoods: The model uses Gaussian-style probability density functions to compare normalized returns and volatility against "ideal" profiles for each state. For example, the Crash Regime likelihood increases when returns are significantly below the mean and volatility is significantly above the mean. Transition Matrix (Markov Property): This defines the "memory" of the system. The matrix is weighted toward "persistence" (diagonal values), meaning the market is statistically more likely to stay in its current regime than to jump to a different one every bar. 🔶 SETTINGS 🔹 HMM Settings Lookback Period: The window used to calculate the mean and standard deviation for normalizing returns and volatility. Learning Rate: Controls how quickly the model updates its internal probabilities. Range: 0.01 (very slow/stable) to 1.0 (instant/reactive). 🔹 Dashboard Enable Dashboard: Toggles the visibility of the on-screen information table. Position: Determines where the dashboard is anchored (Top Right, Bottom Right, or Bottom Left). Size: Adjusts the scale of the dashboard text and cells.
Pine Script® Indikator
von LuxAlgo
2
Sessions, Killzones & HTF LevelsSessions, Killzones & HTF Levels Overview All-in-one ICT-style session and levels indicator for futures and forex. Highlights trading sessions and killzones as background colors, tracks session highs/lows with dotted reference lines, and draws previous period high/low levels for daily, weekly, and hourly timeframes. Features Trading Sessions (Asia, London, NY) - Background color highlighting during each session window (no chart distortion) - Distinct colors per session: Asia (purple), London (blue), NY (orange) - Developing session high/low tracked in real-time with dotted lines and labels - Lines extend a configurable number of bars after session close (default 15) - All session times configurable in Eastern Time (DST-aware) ICT Killzones (5 zones) - Asian KZ (20:00-00:00), London KZ (02:00-05:00), NY AM (08:30-11:00), NY Lunch (11:00-13:00), NY PM (13:00-16:00) - Ultra-light background highlighting that doesn't interfere with price action - Each killzone independently toggleable — NY Lunch off by default - All times configurable in ET Previous Period High/Low Levels - Previous Daily High/Low, Previous Weekly High/Low, Previous Hourly High/Low - Drawn as dotted lines extending a configurable number of bars (default 15) - Only shows fully closed period data — no developing/unconfirmed levels - Auto-hides when chart timeframe exceeds the level's timeframe (e.g., daily levels hidden on weekly charts) - Labeled: "Prev Daily High", "Prev Daily Low", "Prev Weekly High", etc. Smart Defaults - Configurable lookback window limits historical drawings to conserve TradingView object limits - Timezone selector: Eastern Time (default), Central, or UTC - All colors, transparency levels, and visibility toggles are fully configurable - Inputs organized into logical groups: Sessions, Killzones, HTF Levels, General Inputs Sessions: Show/hide per session, session time windows, colors, box transparency (92%), H/L line transparency (40%), H/L extension bars (15) Killzones: Show/hide per killzone, time windows, colors, box transparency (95%) HTF Levels: Show/hide per level pair (Daily, Weekly, Hourly), colors per pair, line transparency (20%), extension bars (15) General: Max days back (5), timezone selector How It Works Sessions are detected using PineScript's time() function with configurable session strings in the selected timezone. When a session is active, the chart background is tinted with the session's color. Session highs and lows are tracked bar-by-bar during the session, then frozen and extended as dotted reference lines after the session closes. Killzones use the same background highlighting approach. They are purely time-based windows with no H/L tracking — designed to show you when the high-probability trading windows are active. HTF Levels use request.security() to fetch the previous completed candle's high and low from daily, weekly, and hourly timeframes. The indicator uses barmerge.lookahead_off to guarantee that only fully closed candle data is displayed — you will never see levels from a developing/unconfirmed period. Levels are automatically hidden when the chart timeframe is equal to or higher than the level's timeframe. Usage Tips - Use session backgrounds to quickly identify which session you're trading in - Session H/L lines serve as intraday support/resistance levels - Killzone backgrounds highlight the highest-probability windows for ICT setups - Previous Daily and Weekly highs/lows are key liquidity levels — watch for sweeps - Combine with the FVG and Order Flow indicators for a complete ICT toolkit - Increase "Max days back" if you want more historical session drawings (watch the 500 object limit) Session Times (defaults, all ET) ┌─────────────┬───────┬───────┐ │ Session/KZ │ Start │ End │ ├─────────────┼───────┼───────┤ │ Asia │ 20:00 │ 00:00 │ ├─────────────┼───────┼───────┤ │ London │ 02:00 │ 05:00 │ ├─────────────┼───────┼───────┤ │ NY │ 09:30 │ 12:00 │ ├─────────────┼───────┼───────┤ │ Asian KZ │ 20:00 │ 00:00 │ ├─────────────┼───────┼───────┤ │ London KZ │ 02:00 │ 05:00 │ ├─────────────┼───────┼───────┤ │ NY AM KZ │ 08:30 │ 11:00 │ ├─────────────┼───────┼───────┤ │ NY Lunch KZ │ 11:00 │ 13:00 │ ├─────────────┼───────┼───────┤ │ NY PM KZ │ 13:00 │ 16:00 │ └─────────────┴───────┴───────┘
Pine Script® Indikator
von james_coggan
NAVI by Ravi Devraj Saxena (Gold RR 1.3)NAVI by Ravi Devraj Saxena (Gold RR2) This indicator is designed to help traders read volatility extremes and capture structured reversal opportunities using Bollinger Band interactions, session timing, and risk‑defined trade zones. NAVI intelligently manages one trade at a time, preventing overlapping positions and helping newer traders maintain disciplined execution. The system includes: Session‑filtered signals for precision trading during active hours Primary Long/Short setups based on BB touches and candle strength Extra Long/Short setups for momentum continuation opportunities Dynamic RR zones, visual entry pads, stop‑loss blocks, and target boxes Built‑in single‑position mode ensuring no new trade is taken until the current one fully closes Automatic TP/SL detection with chart labels for clean visual tracking Lightweight and optimized drawing engine for smooth use even on lower timeframes NAVI is built to support disciplined, rule‑based trading with clear structure, clean visuals, and zero ambiguity. Whether you scalp or intraday trade, this tool keeps your chart organized and your decisions consistent.
Pine Script® Indikator
von ravidevrajsaxena
1
ZenAlgo - ABCThis indicator identifies a three-point price structure (X, A, B) and projects proportional price levels forward from point B. It uses either automatically detected swing points or manually selected anchors and then builds a forward projection framework based on the relative movement between X and A. 1. Anchor Point Selection (X, A, B) The script first determines three key price points that define the reference movement. Automatic mode When manual anchors are disabled, the indicator scans historical bars to detect local highs and lows using a fixed number of bars on the left and right side. A pivot high is confirmed only after enough future bars exist, and the same applies to pivot lows. This avoids using information that is not yet available in real time. Detected pivots are stored in sequence: The previous confirmed pivot becomes X The next confirmed pivot becomes A The most recent confirmed pivot becomes B To avoid repeatedly using the same type of pivot, the script alternates between highs and lows. This ensures that X, A, and B always represent a swing structure instead of a flat sequence. Manual mode When manual anchors are enabled, the user defines three timestamps. The script captures the price and bar index at those times. After all three points are collected, the script adjusts them to represent true extremes inside their bars. Depending on direction, it replaces closes with highs or lows so that X and A form a valid swing, and B represents a corrective endpoint. If manual anchors are incomplete, the script falls back to the automatic pivots. 2. Validation and Direction Detection After anchors are collected, the script checks whether all three points are available. If any of them is missing, no projection is drawn. When X, A, and B exist, the script determines the directional context: If A is above X, the structure is treated as bullish If A is below X, the structure is treated as bearish The vertical distance between X and A defines the reference movement. This distance is treated as the base unit for all further projections. This approach assumes that the impulse move from X to A represents the dominant directional leg, and that B represents a retracement or pause within that structure. 3. Projection Calculation All projected levels are derived from the difference between X and A and are applied starting from point B. For each predefined ratio: In bullish structures, the distance from X to A is added upward from B In bearish structures, the distance is subtracted downward from B This produces a set of horizontal price levels that are proportional to the initial impulse. No fixed price values are used. All levels scale automatically with market volatility and with the size of the X–A movement. 4. Configurable Levels and Naming The indicator defines a list of projection ratios that represent retracement, extension, and continuation zones. Each level can be enabled or disabled and has an adjustable color and transparency. Each level may be displayed in two ways: As a descriptive name combined with the ratio As a numeric ratio combined with the projected price The naming system maps specific ratios to semantic labels such as base, entry, intermediate targets, main target, and extended continuation levels. These names are fixed in the script and reflect their relative position in the projection structure. 5. Visual Construction On the most recent bar, the script clears all previously drawn elements and rebuilds the full structure. It then draws: A dashed line from X to A and from A to B to visualize the underlying swing Labels at X, A, and B with direction-aware placement Horizontal lines from B into the future for each enabled level Text labels at the end of each level line All level lines extend a configurable number of bars to the right of the current bar, creating a forward projection area. Transparency values are fixed to maintain visual consistency and to avoid obscuring price action. 6. Zone Construction In addition to individual lines, the script can draw shaded zones between selected pairs of levels. These zones include: A retracement zone between two closely spaced mid-range ratios A target zone between the main extension levels An extended continuation zone above or below the main target Zones are drawn as semi-transparent rectangles from point B to the right extension limit. Their vertical boundaries are defined by the corresponding projected levels. These zones highlight areas where price interaction with multiple proportional levels is expected. 7. Display and Update Logic The drawing process runs only on the most recent bar. This prevents excessive historical objects and ensures that projections always reflect the latest confirmed X, A, and B. All graphical objects are stored internally and deleted before redrawing. This avoids overlap and keeps the chart synchronized with the current structure. 8. Interpretation of Levels The projected levels represent proportional price distances derived from the prior impulse. They should be interpreted as: Reference zones for potential reactions Areas of interest for continuation or exhaustion Context for managing existing positions Lower ratios correspond to shallow projections near B. Higher ratios correspond to extended moves away from B. No level represents a guaranteed support or resistance. All values are conditional on the validity of the underlying X–A–B structure. 9. Practical Usage Typical usage follows this workflow: Wait for the script to confirm X, A, and B Observe whether the structure is bullish or bearish Use projected levels as reference for planning entries, exits, and risk placement Re-evaluate when a new pivot replaces X, A, or B Manual anchors can be used when the user wants to enforce a specific structure that differs from the automatic pivot logic. The indicator is designed for contextual analysis rather than standalone signal generation. 10. Limitations and Disclaimers This indicator depends on confirmed pivots. In fast or highly volatile markets, pivot confirmation can lag, which delays projections. Structures may be invalidated when: Price forms new extremes before a pivot is confirmed Market conditions change abruptly Range-bound markets produce frequent small pivots In such conditions, projected levels may shift frequently or lose relevance. The method assumes that past impulse size is a meaningful reference for future movement. This assumption does not hold in all market regimes. The indicator does not incorporate volume, order flow, trend filters, or volatility regimes. It should therefore be combined with additional analysis. 11. Relationship to Manual Fibonacci and ABC Tools Unlike standard manual Fibonacci retracement or projection tools, this indicator does not rely on subjective anchor placement. In automatic mode, swing points are selected using a fixed pivot detection process, which enforces consistent structural rules. Anchor points are derived from confirmed price pivots instead of manual selection The X–A–B structure is maintained automatically as new swings form All projection levels and zones are recalculated and redrawn dynamically This removes the need for repeated manual adjustments when market structure changes. Compared to typical ABC projection tools, the script formalizes the entire workflow. The selection of reference points, the construction of proportional levels, and the management of graphical objects are handled programmatically. This prevents inconsistent anchor choices, reduces user interpretation bias, and ensures that projections always reflect the most recent validated structure. The integrated zone construction further extends standard projection methods by grouping related levels into continuous price regions, rather than displaying only isolated horizontal lines. Summary This script identifies swing-based X–A–B structures using confirmed pivots or manual anchors, measures the impulse between X and A, and projects proportional levels from B. All displayed lines and zones are derived from this single reference movement and update dynamically as new pivots appear. The indicator provides a structured projection framework based on historical price geometry rather than predictive signals.
Pine Script® Indikator
von ZenAlgo_Official
2
Liquidation Heatmap by RumiancevLiquidation Heatmap by Rumiancev Overview Liquidation Heatmap is an open-source visual map of estimated liquidation zones built from activity spikes . When the script detects an unusually large spike, it projects liquidation levels for multiple leverage tiers and aggregates them into horizontal price “bins”. Each bin accumulates weight over time and is displayed as a color gradient: • Brighter / hotter = higher accumulated weight • Darker / colder = lower accumulated weight Important: This is not an exchange liquidation feed and it does not display “real liquidation prices”. It is a proxy model designed to visualize where liquidation pressure could be clustering based on abnormal market activity. Why BTCUSDT.P is recommended For the most consistent and “liquidation-relevant” behavior, use a perpetual futures symbol such as BTCUSDT.P . Perpetual markets provide Open Interest , so the script can use OI Delta (change in OI) as the spike stream. OI delta typically reflects leveraged positioning changes (build-up / flushes) more directly than spot volume. • On perpetuals → OI data is available → spikes are usually cleaner for this model • On spot → OI is not available → the script may fall back to volume, which can be noisier If needed, set OI Symbol Override manually (examples are shown in the input tooltip). How it works (logic) 1) Select a spike stream • AUTO : uses OI Delta if available, otherwise Volume • OI : forces OI Delta • VOL : forces Volume only 2) Detect spike events The script measures abnormal activity using a Z-score style approach on the absolute stream: • Spike Lookback defines the baseline window • Sensitivity maps to a threshold (lower = more events, higher = fewer events) • Min bars between events optionally reduces clustering on lower timeframes 3) Project liquidation prices For each spike event, liquidation estimates are calculated for up to three leverage tiers: • Long liquidations are projected below the reference price • Short liquidations are projected above the reference price 4) Bin, accumulate, and colorize Projected levels are snapped into bins using Bin Scale (ticks) . Bin weight is accumulated and displayed as a gradient between Low density and High density . 5) Freeze on touch When price touches a bin (wick or close, depending on settings), the bin is frozen : • it stops updating • it becomes dotted / high transparency This keeps a lightweight history of zones that have been interacted with. How to read the map • Bins below price often represent potential long-liquidation pressure zones • Bins above price often represent potential short-liquidation pressure zones • Brighter bins = more accumulated spike weight → potentially more crowded zone • Frozen dotted bins = price already touched that zone (historical interaction) Timeframes (recommendations) This indicator runs on any timeframe, but density/noise changes significantly. Best balance (recommended): • 15m / 1H / 4H — good signal-to-noise and clean structure Higher timeframes (cleaner, fewer zones): • 12H / 1D — fewer events, more “macro” zones Lower timeframes (noisier by nature): • 1m / 3m / 5m — more spikes and more bins To reduce clutter on low TF, consider: • increasing Sensitivity (e.g., 14–18) • enabling Min bars between events (e.g., 10–30) • increasing Bin Scale (ticks) (thicker bins → fewer levels) • enabling Keep only local range bins Inputs (what each setting does) Source • Source Mode : AUTO / VOL / OI • OI Symbol Override : manual OI source if AUTO is not suitable Event (Spike) Filter • Spike Lookback : baseline window for mean/stdev • Sensitivity : lower = more events, higher = fewer events • Use high/low for touch test : wick-based touches • Min bars between events : reduces spike clustering Liquidation Levels (bins) • Reference Price : base price for projections (close/hl2/etc.) • Leverage 1/2/3 : leverage tiers (set to 0 to disable any tier) • Bin Scale (ticks) : bin thickness (bigger = fewer bins) • Extend (bars) : how long active bins extend • Max active bins per side : cap for active bins • Dispersion (%) : splits part of the weight to the opposite side • Keep only local range bins + Local range lookback : trims bins far from recent range Visual • Gradient colors, frozen transparency, legend, and debug marker Limitations / Disclaimer This script is provided for research and educational purposes only . It is not financial advice . The plotted zones are estimates derived from a simplified model (spike detection + leverage projections). Results depend on symbol, exchange data availability (OI), and timeframe.
Pine Script® Indikator
von Rumiancev
Inside Candle Positional StrategyIntroduction This strategy implements a structured Inside Candle breakout model designed to capture expansion moves following short-term price compression. An inside candle represents a temporary contraction in volatility, where the entire range of the current bar is contained within the previous bar. The preceding bar becomes the Mother Candle, and its range defines the potential breakout boundaries. The model focuses purely on price structure and predefined risk parameters rather than trend-following overlays or momentum filters. Core Logic and Structure Inside Candle Detection An inside candle is defined as: Current High < Previous High Current Low > Previous Low When this condition occurs, the previous bar is marked as the Mother Candle. Only one breakout attempt is allowed per identified structure to prevent repeated entries within the same consolidation phase. Trade Entry Rules Entries are executed at market on confirmed bar close. Long Position Close > Mother Candle High No active position Short Position Close < Mother Candle Low No active position This ensures breakout confirmation rather than anticipatory positioning. Risk Management Framework Risk control is fully rule-based and determined at the moment of entry. For each trade: Initial Stop Loss = Opposite boundary of the Mother Candle Risk = Distance between entry price and initial stop Target = Entry ± (Risk × Risk-Reward Ratio) The Risk-Reward Ratio is user configurable. Only one position is active at any time (pyramiding disabled). Optional ATR-Based Trailing Stop An optional trailing mechanism may be enabled: Trailing Stop updates on every confirmed bar. Calculated using ATR × Multiplier. Moves only in the direction of profit. Never worsens beyond the initial stop level. If disabled, exits rely solely on the fixed stop and target. Execution Model All signals are calculated on confirmed bar closes. Entries are market orders. Stop and target levels are evaluated using bar OHLC values. No repainting logic is used. No intrabar order sequencing assumptions are applied. Backtest performance may differ from live execution due to slippage, spread, liquidity, and market conditions. Visual Components Inside candles are highlighted (default: yellow). Entry, Initial Stop, Trailing Stop (if enabled), and Target levels are displayed using line-break formatting for clarity. Designed to maintain structural visibility without excessive chart clutter. Strategy Defaults Initial Capital: $1000 Commission: 0.05% Position Size: 1 (fixed quantity) Pyramiding: Disabled These defaults can be adjusted in the Strategy Properties panel. Intended Application This strategy is suited for studying breakout behavior after short-term consolidation phases. Performance characteristics will vary depending on instrument volatility, timeframe, and market regime. It is presented as a structural breakout framework and should be tested and adapted according to individual risk tolerance and trading objectives. Disclaimer Trading involves significant risk. This script is provided for educational and research purposes only and does not constitute financial advice. Users are responsible for evaluating its suitability for their own trading decisions.
Pine Script® Strategie
von subrajitmishra
XAUUSD Breakout Retest Sniper StrategyThis strategy is designed to demonstrate a structured breakout + retest approach using trend confirmation and volatility-based risk management. It is built for educational and research purposes to help traders understand how breakout continuation moves can be analyzed systematically. The logic focuses on identifying key breakout zones from recent highs and lows, then waiting for price confirmation in the direction of the prevailing trend before simulating entries. Core Logic Behind the Strategy Uses a trend filter (EMA) to define directional bias Identifies recent resistance and support using lookback highs/lows Waits for breakout confirmation and retest behavior Applies ATR-based stop loss and risk-to-reward target projection Designed for intraday charts such as 5M–15M (can be adjusted) The strategy aims to model how price often moves from one liquidity zone to another after breaking key levels. It avoids trading in consolidation and focuses only on confirmed directional moves. How It Works • Bullish conditions when price is above trend EMA • Bearish conditions when price is below trend EMA • Breakout of recent structure signals potential continuation • ATR used to simulate dynamic SL and TP levels • Built-in backtesting for study and optimization Important Notes This script is a technical model for chart study and strategy development. It does not guarantee performance and should not be used as financial advice or a signal service. Users are encouraged to test, modify, and adapt it according to their own trading plans and risk management rules. Best Use Learning breakout + retest behavior Backtesting structured entry models Studying trend-based continuation setups Developing personal trading systems Disclaimer This publication is for educational and informational purposes only. Trading involves risk, and past performance does not guarantee future results. Always perform your own analysis before making trading decisions. xauusd, gold, strategy, breakout, price action, algorithmic trading, trend trading
Pine Script® Strategie
von JaxonJackFX
Multi-Signal Trading Indicator + FVG + Liquidity - JamilThe Multi Signal + FVG + Liquidity Indicator is a complete smart-money-based trading system designed to provide high-probability trade setups using multiple confluences in one place. This indicator combines structure, momentum, liquidity, and trend analysis to help traders identify precise entry and exit opportunities. 🔍 Key Features: 💧 Liquidity Zones: Automatically detects liquidity areas where stop hunts and strong reactions are likely to occur. 📊 Fair Value Gaps (FVG): Identifies imbalance zones for potential price retracements and continuation setups. 🟢🔴 Buy & Sell Signals: Clear entry signals based on multi-factor confirmation. 📈 4 EMA Trend System: Defines short-term and long-term trend direction for better trade alignment. 🔄 RSI Confirmation: Filters trades using momentum strength and overbought/oversold conditions. ⚡ Multi-Signal Confluence Engine: Combines all elements to reduce noise and increase trade accuracy. This indicator is ideal for traders who follow Smart Money Concepts (SMC), liquidity sweeps, and imbalance-based strategies, while still benefiting from momentum and trend confirmation tools. Whether you are a scalper, intraday trader, or swing trader, this tool provides structured and disciplined trade opportunities. Disclaimer: This indicator is for educational purposes only. Always use proper risk management and confirm setups with your own analysis before entering a trade.
Pine Script® Indikator
von shakeelhafi
Multi-TF Candle CounterThis indicator counts candles starting from a specific date across up to 4 different timeframes at once. It's designed to help traders track market cycles and identify potential turning points using the Denizhan number sequence. Key Features: ✅ Multi-Timeframe Support Current chart timeframe 5-minute candles 15-minute candles 1-hour candles ✅ Smart Label Placement Shows higher timeframe counts only on the first candle of that period Example: On a 1-minute chart, the 5m counter only appears every 5 minutes Prevents chart clutter while maintaining accuracy ✅ Number Sequence Highlighting Automatically highlights special numbers: 1, 3, 7, 13, 21, 31, 43, 57, 73... These numbers follow the pattern: n² - (n-1) Special numbers appear in RED for easy identification ✅ Fully Customizable Enable/disable each timeframe independently Choose custom colors for each timeframe Set label position (High, Low, Close, Open) Single start/end date applies to all timeframes Toggle special number highlighting on/off How to Use: Add to Chart: Apply the indicator to any chart Set Date Range: Confirm the start and end dates (applies to all timeframes) Enable Timeframes: Turn on the timeframes you want to track Customize Colors: Set different colors for each timeframe to distinguish them Watch for Red Numbers: Special Denizhan numbers appear in red as potential turning points Use Cases: Cycle Tracking: Monitor how many candles have passed since a significant event Multi-Timeframe Analysis: See relationships between different timeframe counts Pattern Recognition: Identify when multiple timeframes align at special numbers Reversal Points: Watch for Denizhan numbers as potential support/resistance timing Settings Overview: Start Date (All TF) End Date (All TF) Each Timeframe Has: Enable toggle Text color Label location Special number highlighting Note: This indicator works on any timeframe but is most effective on lower timeframes (1m, 5m, 15m) when tracking higher timeframe counts.
Pine Script® Indikator
von berktest01
Global Trend with Buy/Sell % + Configurable Dead ZoneThis indicator shows the global market trend based on a long-term EMA and calculates the percentage of buying and selling pressure. The trend is displayed as Bullish 🟢 or Bearish 🔴, while the buying and selling percentages are shown in a fixed table on the top-right corner of the chart. ✅ Features: Global Trend Detection: Determines bullish or bearish market conditions using a long-term EMA. Stable Buy/Sell Percentages: Shows smoothed buy and sell percentages that update only when the global trend changes, ignoring minor price fluctuations. Dominance Indicator: Highlights whether buying or selling is currently dominant. Stylish Table Display: Fixed on the chart, clearly showing trend, percentages, and dominance for quick analysis.
Pine Script® Indikator
von M0NSTER_X
Global Trend with Buy/Sell %This indicator shows the global market trend based on a long-term EMA and calculates the percentage of buying and selling pressure. The trend is displayed as Bullish 🟢 or Bearish 🔴, while the buying and selling percentages are shown in a fixed table on the top-right corner of the chart. ✅ Features: Global Trend Detection: Determines bullish or bearish market conditions using a long-term EMA. Stable Buy/Sell Percentages: Shows smoothed buy and sell percentages that update only when the global trend changes, ignoring minor price fluctuations. Dominance Indicator: Highlights whether buying or selling is currently dominant. Stylish Table Display: Fixed on the chart, clearly showing trend, percentages, and dominance for quick analysis.
Pine Script® Indikator
von M0NSTER_X