AI Smart Signal (MASTER)# User Guide: AI Smart Signal (MASTER)
**The Ultimate All-In-One Trading System**
This comprehensive indicator combines the power of trend following, momentum analysis, and market structure into a single, intelligent tool. It is designed to act as your "Co-Pilot" in the market, providing clear signals and filtering out noise.
---
## 1. Visual Overview
### The Quantum Dots (Wave)
The core of the system is the **Smoothed Heiken Ashi** ribbon, displayed as dynamic dots by default.
- **Green Dots**: Bullish Trend (Look for BUY).
- **Red Dots**: Bearish Trend (Look for SELL).
- **Dot Size**:
- *Small*: Weak market / Ranging.
- *Medium*: Strong Trend.
- *Large*: **HIGH MOMENTUM** (Powerful Move).
### The Instruction Overlay
A dashboard on the chart provides real-time guidance:
- **TREND**: Shows if the market is currently Up or Down.
- **MOMENTUM**: Analyzes the strength of the move (Weak/Strong/Power).
- **ACTION**: Suggests to "HOLD", "BiUY", "SELL", or "WAIT".
---
## 2. Key Features
### A. Signal Strategy
You can choose your preferred entry signal logic in the settings:
1. **AI Smart Signal (Default)**: Uses a SuperTrend-based adaptive algorithm.
2. **Heiken Ashi Reversal**: Signals when the Quantum Wave changes color.
3. **Market Structure**: Signals on Higher Highs (HH) and Lower Lows (LL).
4. **EMA Crossover**: Signals when Fast EMA crosses Slow EMA.
### B. Smart Filters
- **Sideways Filter**: Automatically hides signals when the ADX (trend strength) is low (< 15), preventing losses during choppy markets.
- **Auto Timeframe**: The indicator automatically adjusts its sensitivity based on the chart timeframe (e.g., faster settings for 1-minute, stable settings for Daily).
### C. Additional Tools (Toggle ON/OFF)
- **Demand & Supply Zones**: Auto-draws support and resistance rectangles.
- **Market Structure**: Labels Highs and Lows (HH, HL, LH, LL).
- **Volume Profile**: Shows value areas on the side of the chart.
- **Turtle Channels**: Donchian Channel breakout levels.
- **Multi-Timeframe**: See trend status of higher timeframes on your current chart.
---
## 3. How to Trade
### Long Setup (BUY)
1. **Trend Check**: The Quantum Dots or Ribbon must be **GREEN**.
2. **Signal**: Wait for a **BUY** label or "Cycle Hijau" confirmation.
3. **Validation**: Ensure the "ACTION" dashboard says "BUY" or "HOLD".
4. **Stop Loss**: Place below the recent Swing Low or Demand Zone.
### Short Setup (SELL)
1. **Trend Check**: The Quantum Dots or Ribbon must be **RED**.
2. **Signal**: Wait for a **SELL** label or "Cycle Merah" confirmation.
3. **Validation**: Ensure the "ACTION" dashboard says "SELL" or "HOLD".
4. **Stop Loss**: Place above the recent Swing High or Supply Zone.
---
## 4. Settings Guide
- **Visual Settings**: Change "Visual Style" from Dots to Candles, Line, or Ribbon.
- **Signal Strategy**: Switch entry logic here.
- **Dashboard**: Toggle the AI Dashboard ON/OFF or change its size.
Trendanalyse
BB_NTPThis is a combined Bollinger Bands (BB) indicator with 5 SMA lines.
You can change the length of SMA into whatever you want!
Good luck and happy trading!
Initial Balance and FAContext-first intraday framework combining Initial Balance, volatility regime, and higher-timeframe reference levels.
This indicator is built around the principle that markets alternate between balance and imbalance, and that the most reliable opportunities emerge when price interacts with well-defined reference levels. Rather than relying on reactive signals, the framework emphasizes context first—using structurally important levels derived from prior sessions and higher timeframes to understand where acceptance, rejection, and initiative activity are most likely to occur. The goal is not prediction, but clarity: identifying where price is operating relative to its recent value, range, and volatility regime.
The approach deliberately separates calculation from interpretation. Core reference levels remain stable across timeframes, while volatility conditions are evaluated using a higher-timeframe lens to avoid noise and overfitting. This allows intraday traders to operate with a consistent directional bias, regardless of chart resolution, and focus execution around high-quality locations rather than chasing momentum. The indicator is designed to support discretionary decision-making, reinforcing disciplined trade selection, risk awareness, and alignment with broader market structure
RISK Disclaimer
This indicator is provided for educational and analytical purposes only and does not constitute investment advice or trade recommendations. Markets involve risk, and past behavior does not guarantee future results. Users are solely responsible for their trading decisions, position sizing, and risk management. Always validate signals with your own analysis and trade within predefined risk limits.
Mkt-Viper ProMkt-Viper Pro
🔶 Overview
Mkt-Viper Pro is a comprehensive market intelligence suite designed to unify trend detection, structural analysis, and price action geometry into a single decision-making framework. Rather than relying on a single lagging calculation, Viper Pro utilizes a "Path Efficiency" model that weighs price movement against the energy (volatility and volume) required to achieve it.
The result is a chart overlay that separates statistically significant trend shifts from market noise. Traders receive adaptive Trend Signals based on volume and volatility thresholds, a background Trend Navigator Cloud for trend context, dynamic Kinetic Ranges for support/resistance, candle pattern detection, an automated Geometric Pattern engine, and much more detailed below. Internally, the system functions as a synaptic network—where momentum, volume, and price structure must align before a signal is validated.
In short, Mkt-Viper Pro is designed for traders who require a trend following and technical roadmap for filtering out low-quality volatility to focus on structural expansions and high-probability reversals.
🔶 What makes Mkt-Viper Pro unique?
Mkt-Viper Pro stands out by combining a volatility-adaptive trend engine with a complete confluence suite. Uniquely, it uses a "Path Efficiency" calculation to separate messy price action from true momentum, automatically filtering out noise during choppy markets. This core logic is then reinforced by multiple layers of environmental context—allowing you to check every move against the background Trend Navigator, Viper Band, Kinetic Ranges, geometric pattern engine and much more. Instead of relying on a single data point, the system provides you with suite of confluences to help you make well informed trading decisions.
Main Features
🔶 Viper Trend Signals
The core of the system is a sophisticated trend detection engine designed to filter out market noise. Instead of reacting to every minor price fluctuation, the algorithm evaluates momentum pressure relative to current volatility. It validates a directional shift only when the market exerts enough "energy" to breach calculated stability thresholds, ensuring that changes in trend are statistically significant rather than random noise.
These mechanics are translated onto the chart through a clean and intuitive visual interface:
Signal Logic:
Trend signals are generated when the price decisively shifts directional momentum. These are marked by clean Triangle Signals at the exact moment of the shift, keeping the chart uncluttered.
Trend Coloring:
To provide instant visual feedback on the market state, the indicator applies Candle Coloring in two distinct modes. Traders can choose a Static mode for clear, binary directional cues, or a Gradient mode that intensifies the color saturation as the trend gains strength and momentum.
Strong vs. Normal:
The system automatically grades every signal. A "Strong" classification is issued when the immediate momentum shift aligns perfectly with the broader, longer-term market context, identifying high-confluence setups with greater weight.
Auto-Tuning & Sensitivity Control
Market conditions are never static; volatility expands and contracts constantly. To address this, Viper Pro is equipped with a dual-mode calibration engine:
Auto-Tuning:
When enabled, the system actively measures "Path Efficiency"—calculating in real-time how choppy or direct price action is. It automatically adjusts its sensitivity, tightening validation criteria during clean trends and loosening them during chop to prevent false signals. Users can select from Fast, Moderate, or Slow profiles to suit their trading style.
Manual Tuning:
For traders who require fixed parameters for backtesting or specific asset classes, the system offers a granular 1–50 sensitivity dial. This allows for precise manual calibration to specific timeframes, giving you total control over how reactive the signals should be.
⚠️ Important:
These signals identify potential momentum shifts and should not be traded blindly. For high-probability outcomes, always validate the signal by ensuring it aligns with other confluences within the suite or other forms of technical analysis.
🔶 Trend Navigator Cloud
The Trend Navigator serves as the indicator’s "Context Awareness" layer, visualizing the broader ambient direction or "weather" of the market. Solving the classic dilemma between "lag" and "noise," this feature utilizes an Adaptive Flow Algorithm that adjusts its internal responsiveness based on real-time RSI and market velocity.
Smart Adaptation:
Instead of using a fixed lookback period that fails when market conditions change, the Navigator automatically detects the speed of price action. It tightens its tracking during impulsive trends to reduce lag, while loosening and smoothing itself during choppy consolidation to prevent false reversals.
Dynamic Structure:
The feature renders as a background cloud that expands and contracts with volatility. This creates a visual "breathing" support and resistance structure that naturally contains price action during healthy trends.
Usage:
Directional Bias:
When the Cloud is bullish color and below the trend, the macro environment is Bullish; look primarily for Long signals. When below the price action and bearish color, the environment is Bearish; focus on Short signals.
Trend Floor:
In established trends, the Cloud acts as a dynamic floor (or ceiling), highlighting high-probability zones for pullbacks and potential continuation entries.
Custom Tuning:
Users retain full control over the Navigator's behavior. You can enable Auto-Tuning to let the engine select the optimal sensitivity (Fast, Medium, or Slow) based on current conditions, or use the Manual Speed Dial (1–50) to fine-tune the cloud's reactivity to your specific timeframe or asset class.
🔶 Viper Band
The Viper Band is engineered as a multi-dimensional market utility, seamlessly consolidating four distinct technical concepts into a single, adaptive overlay. This unified approach provides a complete view of immediate price dynamics:
Trend Following:
It acts as an immediate directional filter. When the price is holding above the band, the short-term structure is Bullish; when below, it is Bearish. The band changes color dynamically to reinforce this state.
Dynamic Support & Resistance:
The outer edges of the band are volatility-adjusted. In a strong trend, the band creates a rising floor (or falling ceiling), acting as a trailing support zone where price often bounces to continue the move.
Market Equilibrium:
The center of the band represents the market's "fair value" or equilibrium point relative to the current timeframe. It filters out tick-by-tick noise to show the true mean price.
Price Magnet:
Because markets cannot stay overextended indefinitely, the Viper Band acts as a gravitational magnet. When price deviates too far from the band, it signals an overextended state, often preceding a "snap-back" or mean reversion event where price returns to the Band.
Usage:
Trend Health:
In a healthy, sustainable trend, the band often acts as a continuous trailing support or resistance zone.
Re-Entry:
For trend-followers, pullbacks that touch or test the Viper Band often present high-probability, low-risk opportunities to rejoin the dominant move.
🔶 Viper Kinetic Ranges (VKR)
Standard pivot points and static support lines often fail because they treat every trading session the same, ignoring the unique volatility profile of the current day. Viper Kinetic Ranges (VKR) solves this by generating dynamic Support and Resistance structures that actively adapt to the market's physical "energy."
Volume-Weighted Expansion:
Unlike standard volatility envelopes that rely solely on price range, VKR incorporates Volume Weighting. When volume flows into the market (e.g., during market opens or news events), the defined range automatically expands. This helps prevent "fake-out" signals by proving that the market needs more energy to validate a true breakout during high-activity periods.
State-Change Logic:
The levels do not drift aimlessly with every tick. Instead, they operate on a State-Change basis. The Support and Resistance levels remain locked and stable until the market exerts enough directional force to force a "state transition." When this happens, the levels "step" up or down to a new equilibrium zone. This stepping behavior helps traders visualize exactly when the market has accepted a new value area versus when it is simply ranging.
Concept:
Think of these levels as the "lungs" of the market. They expand and contract to show where price is statistically likely to find equilibrium or rejection based on the current expenditure of buying and selling energy.
Usage:
Trend Validation:
Use the central Equilibrium Level (Datum) as your directional "Line in the Sand." As long as price holds above this stepped line, the immediate value area is Bullish. A breach below signals a potential regime change.
Precision Targeting:
The outer Major Structures represent statistical exhaustion points extended by volatility. These are ideal, scientifically derived locations to set Take Profit orders or anticipate a mean-reversion bounce.
Support and Resistance:
Each level may produce some type of reaction and can act as support and resistance levels presenting potential opportunities for entries or profit taking.
🔶 Auto-Geometric Chart Patterns
Viper Pro features a "V7" pattern recognition engine that runs a continuous, frame-by-frame structural analysis of price action. Instead of waiting for a pattern to complete before drawing it (hindsight), this engine detects Wedges, Channels, and Triangles as they form in real-time.
Vertex Array Technology:
Unlike basic scripts that simply connect the highest highs and lowest lows, the Viper Engine stores historical pivot points in dynamic arrays. It analyzes the mathematical relationship between these points—calculating slope ratios and width consistency—to determine if a valid geometric structure exists.
⚠️ Technical Disclosure: Pattern Dynamic Regeneration
The Geometric Pattern Engine utilizes a process of "Functional Repainting" (Dynamic Object Regeneration). Because chart patterns such as Wedges and Channels are evolving structures, the indicator continuously re-evaluates the validity of vertices in real-time. As the price expands, trend lines will adjust to new market data to keep information relevant. Additionally, as price data unfolds, old patterns or invalidated patterns will be removed from the chart automatically in order to print a newer more recent pattern to keep your charts clean and up to date on the most recent price data.
🔶 Candle Pattern Recognition
The Candle Pattern Recognition Module utilizes a Context-Aware Engine to scan for high-probability Reversal and Continuation structures (Hammers, Stars, Dojis, and Absorptions).
Trend & Context Filtering:
A pattern is only as good as its location. The engine filters signals based on the broader trend (e.g., looking for Hammer candles only during downtrends and Falling Stars only during uptrends). This ensures you are trading reversals at logical structural points, not random noise.
Quality & Volume Logic:
The system includes an integrated "Quality Filter." It ignores patterns formed on low liquidity. For a signal to be valid, it must demonstrate a "Footprint of Interest"—verified by a relative spike in Volume or an expansion in ATR (Range) relative to the recent lookback period.
The Patterns:
Absorption:
Highlights powerful shifts in control (often called Engulfing) where one side decisively overtakes the other.
Stars & Hammers:
Pinpoints rejection wicks that signal exhaustion.
Dojis:
Identifies moments of indecision and potential equilibrium.
🔶 Swing Failure Pattern (SFP) Detection
Institutional trading often involves seeking liquidity at obvious structural levels. The SFP engine is designed to automatically detect these "Liquidity Sweeps" or "Bull/Bear Traps" where the market hunts for stop-losses before reversing.
The Logic:
The system actively monitors significant Pivot Points. An SFP is validated when the price pierces a key Pivot High or Low—taking out liquidity—but subsequently fails to hold that level and closes back within the previous range.
Visuals:
When a sweep occurs, the indicator plots a discrete dashed line connecting the original pivot to the current "sweep" candle. This visualizes the exact "Trap Zone" where breakout traders were caught offside, signaling a potential high-probability reversal opportunity.
Usage:
Fade the Breakout:
An SFP is a classic "Fade" signal. When a Bearish SFP appears at a high, it implies that buyers have potentially been trapped; traders often look for Short entries here. Conversely, a Bullish SFP at a low suggests sellers are trapped, offering a potential Long opportunity.
🔶 Reversal Cloud
The Reversal Cloud acts as a statistical boundary gauge, designed to visualize when price action has extended significantly beyond its average value. Markets typically spend the majority of their time within a standard distribution; this feature highlights the rare moments when volatility pushes price into statistical extremes.
The Logic:
The engine calculates a dynamic deviation envelope based on recent market volatility. Rather than predicting a specific turning point, it identifies zones where the market is "stretched" relative to its baseline. When price enters this colored "Horizon," it indicates that the current move is statistically extended, which historically correlates with periods of consolidation or mean reversion.
Visuals:
The feature renders as a shaded zone at the upper and lower limits of the chart. It remains passive during normal price action but highlights "Breach" events when price pushes into these outer deviation bands.
Usage:
Context Awareness:
Use the Cloud to gauge the maturity of a move. Entering new impulsive trades while inside the Reversal Cloud carries higher statistical risk, as the price is already far from equilibrium.
Reaction Watch:
For traders already in a position, a breach of the Cloud serves as a cue to tighten risk management or monitor for signs of momentum loss, as the market digests the recent expansion.
⚠️ Important Note:
While these zones represent statistical extremes, they are not hard barriers. In powerfully trending markets or during high-impact news events, price can "ride" or expand these bands for extended periods without reversing immediately. Do not trade these zones blindly; always wait for secondary confirmation of momentum loss (such as a structural break or a rejection candle) before anticipating a reversal.
🔶 Key Levels & Session Structure
Successful trading requires knowing where liquidity resides. Viper Pro automates the analysis of "Market Memory" by mapping significant historical and time-based structures directly onto your chart.
The Logic:
It automatically plots the Previous Day (PDH/PDL), Previous Week (PWH/PWL), and Previous Month (PMH/PML). These levels often act as major "Magnets" where price reverses or accelerates as it seeks liquidity.
Session Profiles:
Intraday price action is heavily influenced by the distinct behaviors of the global trading centers. This module highlights the trading ranges of the Asia, London, and New York sessions.
The Logic:
By visualizing the High and Low of the previous session, traders can spot "Session Sweeps"—a common phenomenon where the market manipulates price to break a prior session's high or low to trap traders before reversing.
Usage:
Confluence:
These levels serve as an excellent filter for Trend Signals. For example, a "Buy" signal generated directly below a Weekly High requires caution, whereas a signal bouncing off a Daily Low carries higher conviction.
Targeting:
Use these static structural levels as scientifically derived potential Take Profit zones, as price often pauses or reacts when testing these historical boundaries.
🔶 Opening Range Breakout (ORB)
The first 15 minutes of the trading session (09:30–09:45 ET) often establish the initial balance and sentiment for the entire trading day. The Viper ORB engine automates the identification of this critical volatility window.
The Logic:
The system defines the "Opening Range" by capturing the highest high and lowest low of the session's first 15 minutes. It waits for the opening time window to fully close before projecting the levels, ensuring you are planning trades against confirmed structure rather than developing noise.
Visuals:
Once the opening window concludes, two distinct levels (High and Low) are projected forward for the remainder of the session.
Usage:
Breakout Plays:
A clean close above the Opening Range High often signals strong buying intent, suggesting a trend day.
Range Fading:
If price breaks the range but fails to hold, price often rotates back to the opposite side of the opening range.
Support/Resistance Flip:
Later in the day, these levels often act as strong support or resistance when retested.
🔶 Visual Intelligence (Color Themes)
Visual clarity is essential for rapid decision-making. A cluttered or poorly contrasted chart can lead to cognitive fatigue. To address this, Mkt-Viper Pro features a global Color Theme Engine that instantly synchronizes every element of the suite—signals, candles, clouds, and text—to a unified palette.
The Presets:
The system comes with five professionally designed profiles to suit different trading environments and lighting conditions:
Viper Original: High-contrast Neon Green & Purple (Optimized for Dark Mode).
Classic: Standard Green/Red configuration for traditionalists.
Cool Blues: A calming Blue/Violet palette designed to reduce emotional reactivity.
Ember & Ash: High-warmth Orange/Slate contrast.
Monochrome: Grayscale/Silver logic for distraction-free structural analysis.
Customization:
Traders with specific branding requirements or accessibility needs (such as color blindness) can select "Custom Theme." This unlocks distinct color inputs, allowing you to define your own specific Bullish, Bearish, and Neutral colors that instantly propagate across the entire indicator suite.
🔶 How to use:
Mkt-Viper Pro is designed to reduce "Analysis Paralysis" by organizing data into a clear decision hierarchy. Rather than chasing every signal, we recommend a workflow based on Confluence:
Trend Continuation (The Pullback)
This is the highest probability approach, trading with the momentum.
1. Identify Trend:
Ensure the Viper Trend Signal is Bullish and the Navigator Cloud is bullish.
2. Wait for Value:
Do not chase pumps. Wait for price to pull back into the Navigator Cloud or the center of the Viper Band .
3. Trigger:
Look for a specific confirmation candle (e.g., a Hammer or Bullish Absorption ) to form within that support zone.
4. Target:
Target the next Kinetic Range (VKR) resistance level above.
Structural Reversal (The Fade)
1. Identify Exhaustion:
Wait for price to push into the Reversal Cloud (Statistical Extreme) or hit a major HTF Level (e.g., Previous Week High).
2. Spot the Trap:
Watch for an SFP (Swing Failure Pattern) or a Geometric Wedge pattern to form, indicating momentum loss.
3. Confirmation:
Wait for a counter-trend Candle Pattern (e.g., Falling Star) or a flip in the Viper Trend Signal before entering. Trying to catch a falling knife without this confirmation is not recommended.
The Breakout
Trading expansion from consolidation.
Context: Identify a tightening Geometric Pattern (Triangle) or a clearly defined
Opening Range (ORB) .
Expansion: Wait for a clean candle close outside of the pattern/range.
Validation: Ensure the breakout moves through the Kinetic Range Equilibrium , proving that real volume is backing the move.
Note:
Mkt-Viper Pro is engineered as a complete standalone system for Trend and Structural analysis. However, it also functions as the core "Chart Overlay" module within the wider Mkt-Viper 3-part ecosystem. It is calibrated to synchronize visually and mathematically with its sister scripts, ensuring a unified data view without conflicting signals.
🔶 Realistic Expectations & Risk Management
It is vital to understand that Mkt-Viper Pro is a technical analysis instrument, not a crystal ball. No algorithm can predict the future with 100% certainty. The goal of this system is not to eliminate losses, but to provide a statistical edge by aligning multiple factors of confluence.
Win Rate vs. Risk/Reward:
High-probability trading is not just about "Win Rate"; it is about the relationship between Risk and Reward.
The Edge:
By using the SFP wicks or Viper Band extremes for tight stop-loss placement, and targeting the Kinetic Ranges for exits, the system is designed to identify setups with favorable Risk-to-Reward ratios (e.g., 1:2 or 1:3).
The Reality:
Even a system with a modest win rate can be highly profitable if the winning trades are larger than the losing trades. This suite is built to help you identify those skewed opportunities.
Market Conditions & Drawdown:
Like all trend-following systems, the greatest risk occurs during undefined, choppy range-bound markets where price whipsaws without momentum.
While the "Path Efficiency" filter is designed to minimize this, false signals can and will occur during periods of low liquidity.
Mitigation:
We strongly recommend avoiding entries when the Navigator Cloud is flat/contracted (indicating zero momentum) or when price is stuck between two tight Kinetic Range levels.
---------------------
Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, back test, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Trend Signal Pro v2.1Trend Signal Pro is a technical analysis indicator designed to help traders
identify market trend direction and potential entry points.
The indicator analyzes price behavior using standard candlestick data
and applies trend-filtering logic to reduce false signals during
sideways market conditions.
Signals are generated only when multiple internal conditions align,
making it suitable for intraday and swing trading across different markets.
This indicator does not repaint and should be used as a decision-support tool,
not as a standalone trading system. Proper risk management is advised.
Trend volume profile 2.0Trend Signal Pro is a technical analysis indicator designed to help traders
identify market trend direction and potential entry points.
The indicator analyzes price behavior using standard candlestick data
and applies trend-filtering logic to reduce false signals during
sideways market conditions.
Signals are generated only when multiple internal conditions align,
making it suitable for intraday and swing trading across different markets.
This indicator does not repaint and should be used as a decision-support tool,
not as a standalone trading system. Proper risk management is advised.
Mkt-Viper Edge🔶 Overview
The Mkt-Viper Edge is a specialized market architecture engine designed to map key levels and display the liquidity framework of any asset. It focuses exclusively on Institutional Order Flow and Market Structure analysis to identify high-probability reversal and continuation zones.
Markets do not move randomly; they move from liquidity to liquidity. This indicator automates the complex task of identifying where "Smart Money" has positioned itself. It acts as an X-Ray for your chart—revealing Order Blocks, Fair Value Gaps, Key Support and Resistance levels and Volume areas that are invisible to the naked eye. By visualizing the imbalance between buyers and sellers (Delta) and mapping the breaking points of market structure (BoS/CHoCH), Viper Edge provides the precise "Where" and "Why" behind price movement.
🔶 What makes Mkt-Viper Edge unique?
The Mkt-Viper Edge distinguishes itself by bridging the gap between Price Structure and Institutional Volume. While standard indicators blindly plot pivots and levels based on price alone, Mkt-Viper Edge verifies multiple structural elements against the underlying order flow.
Its Money Flow Matrix engine moves beyond simple "Volume Profiles" by analyzing intra-candle "Wick Pressure." This allows the system to decode the true buying vs. selling intent hidden inside every candle, rather than just aggregating raw data. By cross-referencing this volume data against Key Levels, Order Blocks, and Fair Value Gaps, the system filters out "fake" structure to reveal the high-probability zones where Smart Money is actually active.
Main Features
🔶 Viper Money Flow Matrix
The centerpiece of the system is the Matrix—a next-generation Volume Profile and Liquidity scanner. Instead of simply showing how much volume occurred at a price, the Matrix breaks down the intent of that volume.
The Logic:
The engine scans historical price action (customizable lookback) and categorizes volume into Buying Pressure and Selling Pressure based on "Wick Polarity" logic. It then projects this data as a dashboard on the right side of your chart.
Visuals:
The Wings: The bars extending Left and Right represent the "Delta" (Net Difference) and "Total Liquidity."
Value Area (VA):
The High and Low lines indicate the zone where 70% (Institutional Standard) of the trading activity occurred. Breakouts from this zone can potentially lead to explosive moves.
POC (Point of Control):
The price level with the highest volume node acts as a massive magnet for price.
VWAP: An optional "Anchor VWAP" provides a rolling benchmark for fair value (Daily/Weekly/Monthly).
🔶 Ranked Market Structure (MS)
Understanding the "Bias" is the first step in any trade. The Ranked Market Structure module automates the mapping of Trend Structure using Swing Pivots and ranks them based on how strong the break was.
Features:
External Structure:
Detects major BoS (Break of Structure) and CHoCH (Change of Character) events to define the macro trend.
Internal Structure: (Optional)
Highlights micro-breaks for scalpers looking for entries within the larger leg.
Breakout Grading:
Not all structural breaks are equal. The system automatically grades the "Quality" of every break using a traffic-light system (Green/Yellow/Red circles).
Green:
Indicates a high-momentum, impulsive break (Strong Displacement).
Red:
Indicates a weak break where price barely closed past the level, suggesting a potential lack of follow-through.
🔶 Institutional Order Blocks (OB)
Order Blocks represent footprints where institutions have initiated large positions. This module automatically detects these zones and equips them with a deep-dive data suite, allowing you to validate the conviction behind every level.
Zone Analytics (Volume & Delta):
Every Order Block is generated with an embedded data readout. The system analyzes the specific candle that created the zone and displays:
Total Liquidity:
Displays the absolute volume count (e.g., 2.5M) executed during the zone's creation.
Relative Dominance (%):
Shows the significance of this zone compared to all other active Order Blocks on the chart. If a zone shows "50%," it means it holds half of the total volume of all currently displayed structures, helping you identify the most dominant level.
Net Delta:
A numerical display of the net volume imbalance (e.g., Δ +50K), revealing exactly how aggressive the buyers or sellers were.
Volume Bars:
Visual bars on the edge of the zone showing the exact ratio of Buying vs. Selling pressure.
Strength Grading (S/W):
Not all Order Blocks are created equal. The system automatically grades the quality of every zone by comparing its formation volume against the historical average.
Strong (S):
Marked when the zone was formed on significant volume expansion, indicating high institutional participation.
Weak (W):
Marked when the zone formed on low or declining volume, suggesting less reliability.
Usage:
These zones can potentially be high-probability reversal points. When price returns to a Bullish OB (Green), it is a prime location to look for Long entries.
🔶 Fair Value Gaps (FVG)
Price moves aggressively when liquidity is one-sided, leaving behind "Inefficiencies" or Gaps. The FVG module highlights these specific pockets of imbalance.
The Logic:
The system scans for three-candle patterns where the wicks do not overlap. It draws a zone extending forward until price fills the gap.
Mitigation Tracking:
The engine actively monitors the "Health" of the gap. Specifically, it tracks the 50% (Consequent Encroachment) level. Once price closes beyond the 50% mark of the gap, the zone is considered "Mitigated" and is automatically removed to keep your chart clean.
🔶 Smart Support & Resistance Grid
The Mkt-Viper Edge utilizes a dynamic Support & Resistance engine that evolves in real-time as price action unfolds. Instead of cluttering the chart with every minor turning point, this system builds a high-fidelity grid based on interaction frequency and volume intensity.
Volume-Validated Levels:
The engine includes a built-in Volume Filter that ignores weak structure. A level is only projected if the pivot point was formed with sufficient volume relative to the moving average. This automatically filters out low-conviction "noise" pivots, leaving only the structural levels where real money changed hands.
Dynamic Adaptability:
The grid is not a static drawing; it is a living ecosystem. As price tests and reacts to specific levels, the system updates the grid to reflect the most current market reality, ensuring you are always trading against relevant structure rather than stale data.
Wick Precision:
Users can customize the drawing logic, choosing between "Average Center" (for broad zones) or "Wick Precision" (snapping lines to the exact Highs/Lows) for pinpoint bounce trading.
⚠️ Technical Disclosure: Dynamic Object Regeneration
To ensure the grid remains relevant to the current price action, this module utilizes "Functional Repainting." As new pivot highs and lows are formed and confirmed, the indicator effectively "re-draws" the grid to prioritize the most recent and significant structures. Old or invalidated levels are automatically removed to prevent chart clutter.
🔶 Viper Command Dashboard
For traders who need a macro view, the Command Dashboard provides a real-time "Satellite Link" to multiple timeframes (1m to Daily). Select up to 6 different time frames to view data from.
Data Points:
Structure:
Displays the current Bull/Bear status of the Market Structure logic across all TFs.
Money Flow:
Tracks the Money Flow Index (MFI) to show if volume is expanding or contracting.
Viper Band: (Integration)
Displays the trend status relative to the Viper Band from the Mkt-Viper Pro indicator if you are using the full suite.
Forecast:
Based on the alignment of ADX and EMA trends, the dashboard generates a simplified "Forecast" (Pump, Dump, or Consolidation) to help you align with the dominant momentum.
🔶 Visual Intelligence (Theme Engine)
Visual clarity is essential for rapid decision-making. A cluttered or poorly contrasted chart can lead to cognitive fatigue. To address this, Mkt-Viper Edge features a global Color Theme Engine that instantly synchronizes every element of the suite—signals, candles, clouds, and text—to a unified palette.
The Presets:
The system comes with five professionally designed profiles to suit different trading environments and lighting conditions:
Viper Original: High-contrast Neon Green & Purple (Optimized for Dark Mode).
Classic: Standard Green/Red configuration for traditionalists.
Cool Blues: A calming Blue/Violet palette designed to reduce emotional reactivity.
Ember & Ash: High-warmth Orange/Slate contrast.
Monochrome: Grayscale/Silver logic for distraction-free structural analysis.
Customization:
Traders with specific branding requirements or accessibility needs (such as color blindness) can select "Custom Theme." This unlocks distinct color inputs, allowing you to define your own specific Bullish, Bearish, and Neutral colors that instantly propagate across the entire indicator suite
System Integration
Mkt-Viper Edge is designed to function as the "Structure" module within the wider Mkt-Viper ecosystem. While powerful alone, it is calibrated to work seamlessly with Mkt-Viper Pro (Trend Overlay and Viper Oscillator).
🔶 How to use: The "Edge" Workflow
1. Identify the Bias:
Look at the Smart Structure. Are we making Higher Highs (Bullish BoS)? If the Command Dashboard shows Bullish structure on the Higher Timeframes (H1, H4), look for Longs.
2. Find the Interest Level:
Locate an unmitigated Order Block or FVG that aligns with the trend direction.
3. Validate with Volume:
Check the Money Flow Matrix. Is the POC (Point of Control) sitting near your Order Block? High volume nodes act as "Confluence," increasing the probability of a bounce.
4. Execution: Set your entry at the edge of the Order Block or the 50% mark of the FVG.
🔶 Realistic Expectations & Methodology
The Nature of Liquidity:
Viper Edge identifies where orders were placed historically. While price often reacts to these "Memory" zones, market conditions change. A strong news event can blow through an Order Block without pausing.
Lag vs. Structure:
Market Structure (BoS) is inherently reactive—it requires a candle close to confirm. Therefore, structural signals will always appear after the pivot has formed. This is not "lag" in the traditional sense, but the necessary confirmation of a structural shift.
Object Limit (Technical Disclosure):
TradingView places limits on how many drawing objects (Boxes/Lines) can be on a chart. To ensure performance, Viper Edge uses an active "Garbage Collection" system that deletes the oldest levels once the buffer (default 50-100) is full. This is normal behavior to keep your chart fast and responsive.
---------------------
Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, back test, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Trend volume profile 2.0 Trend Signal Pro is a technical analysis indicator designed to help traders
identify market trend direction and potential entry points.
The indicator analyzes price behavior using standard candlestick data
and applies trend-filtering logic to reduce false signals during
sideways market conditions.
Signals are generated only when multiple internal conditions align,
making it suitable for intraday and swing trading across different markets.
This indicator does not repaint and should be used as a decision-support tool,
not as a standalone trading system. Proper risk management is advised.
Trend Signal Pro v2.1Trend Signal Pro is a technical analysis indicator designed to help traders
identify market trend direction and potential entry points.
The indicator analyzes price behavior using standard candlestick data
and applies trend-filtering logic to reduce false signals during
sideways market conditions.
Signals are generated only when multiple internal conditions align,
making it suitable for intraday and swing trading across different markets.
This indicator does not repaint and should be used as a decision-support tool,
not as a standalone trading system. Proper risk management is advised.
Viper Oscillator🔶 Overview
The Mkt-Viper Oscillator is a specialized Kinetic Momentum Engine engineered for Precision Timing and energy measurement. It serves as a high-fidelity market oscilloscope, designed to decode the raw velocity of price action and identify high-probability entry and exit points with enhanced clarity.
Markets move with varying degrees of force and resistance. Mkt-Viper Oscillator analyzes this behavior by utilizing a Kinetic Momentum Model. It measures Price Displacement against Market Viscosity (a dynamic resistance filter) to determine the true energy behind a move. By filtering out low-energy "drift," this approach allows traders to gauge the true strength of a trend and identify moments of momentum exhaustion or renewal.
🔶 What makes Mkt-Viper Oscillator unique?
The Viper Oscillator distinguishes itself through its Multi-Dimensional Calculation Matrix. Rather than relying on a single data source, it fuses Price Action, Volume Flow, and Volatility (Z-Score) into a single output.
The core engine measures Market Inertia. By applying a "Denoising Kernel" and recursive smoothing algorithms, it filters out erratic ticks to visualize the smooth, hydrodynamic flow of money entering and exiting the asset, providing a clearer picture of market intent.
Main Features
🔶 The Core Oscillator
The central Line or Ribbon of the oscillator represents the "Engine Core." It visualizes the battle between momentum (Torque) and resistance (Drag).
Visual Modes:
Standard:
Uses a multi-layered rendering technique (Core + Outer Glow) to create a crisp, high-visibility "Neon" line.
Ribbon Mode:
Displays a Signal Line cross system. When the fast line crosses the slow "Trail," it signals a micro-shift in momentum.
Momentum Flips:
The oscillator plots discrete Circles on the ribbon when the slope flips direction. These mark the precise moment momentum shifts from expansion to contraction.
🔶 Kinetic Exhaustion Zones
Standard oscillators often use static lines (like 70/30) that provide little context on trend strength. The Viper Oscillator replaces these with dynamic Kinetic Exhaustion Zones.
The Logic:
These zones represent the limits of "Market Torque." Instead of a binary On/Off signal, the zones function as a gradient stress field.
Visuals (Adaptive Glow):
The system utilizes a programmed opacity gradient.
Fade In:
The zones begin to materialize when the Core passes a certain threshhold (Moderate Momentum).
Maximum Glow:
As the oscillator begins to travel deeper beyond the threshold (Peak Torque), the zones glow with maximum intensity, signaling that the move is becoming statistically stretched or overextended.
Usage:
In a strong trend, the oscillator can "pin" inside the glow zone. This is a sign of immense strength, not a reversal. The reversal signal occurs when the Core exits the glow zone and returns toward the mean.
🔶 Z-Score Velocity Line
Floating above the main oscillator is the Velocity Line (Thin Line). This is not just a second oscillator; it is a volatility-adjusted Z-Score.
The Logic:
It measures the speed of price change relative to the current volatility conditions.
Usage:
When the Velocity Line spikes aggressively while the main Oscillator moves slowly, it is an early warning sign for a potential pullback.
🔶 Money Flow Wave (Background)
The background of the oscillator features a subtle, filled "Wave." This is the Money Flow Index (MFI) overlay.
The Logic:
This layer tracks volume-weighted price action. It allows you to see Divergences between Price and Volume.
Usage:
If the Kinetic Core (Price Momentum) is making a Higher High, but the Money Flow Wave (Volume) is making a Lower Low, it indicates a "Hollow Rally" lacking institutional backing.
🔶 Sigma Sniper Signals
The system constantly monitors Volume Volatility using a 3.0 Sigma (Standard Deviation) threshold.
Visuals:
When a volume spike exceeds 3 standard deviations from the mean (a statistical anomaly), a small "⌃" or "⌄" symbol appears at the top or bottom of the panel.
Meaning:
This marks a potential Volume Climax. It signifies potential capitulation (panic selling) or euphoria (fomo buying). These points are possibly probable reversal areas.
🔶 Trend Power Bar
Located at the very bottom of the pane is the Trend Power Bar. This is a binary filter designed to keep you on the right side of the macro flow.
The Logic:
It uses a "Linkage Kernel" (Correlation Coefficient) to measure the alignment of the trend.
Green:
Macro Trend is Bullish.
Red:
Macro Trend is Bearish.
Opacity:
The bar becomes transparent when the trend is weakening, warning you of potential consolidation.
🔶 Fractal Divergences
Timing reversals requires spotting the disconnect between price and momentum. The Divergence Engine uses Fractal Geometry to detect these setups automatically.
Regular Divergence:
Draws lines connecting peaks or valleys where Price pushes further but Momentum fails to follow. These are potential reversal signals.
🔶 Synthetic Resolution Scaler (MTF)
Traders often need to see higher-timeframe momentum without changing charts. The Resolution Scaler allows you to project higher-timeframe data onto your current chart.
How it works:
Instead of using repainting request.security calls, the script mathematically scales the internal lookback periods (Lengths) to simulate higher timeframes (e.g., viewing Hourly momentum on a 15-minute chart) while maintaining smooth, real-time updates.
🔶 Visual Intelligence (Theme Engine)
Visual clarity is essential for rapid decision-making. A cluttered or poorly contrasted chart can lead to cognitive fatigue. To address this, the Viper Oscillator features a global Color Theme Engine that instantly synchronizes every element of the suite—signals, candles, clouds, and text—to a unified palette.
The Presets:
The system comes with five professionally designed profiles to suit different trading environments and lighting conditions:
Viper Original: High-contrast Neon Green & Purple (Optimized for Dark Mode).
Classic: Standard Green/Red configuration for traditionalists.
Cool Blues: A calming Blue/Violet palette designed to reduce emotional reactivity.
Ember & Ash: High-warmth Orange/Slate contrast.
Monochrome: Grayscale/Silver logic for distraction-free structural analysis.
Customization:
Traders with specific branding requirements or accessibility needs (such as color blindness) can select "Custom Theme." This unlocks distinct color inputs, allowing you to define your own specific Bullish, Bearish, and Neutral colors that instantly propagate across the entire indicator suite.
🔶 How to use: The "Timing" Workflow
Mkt-Viper Oscillator is designed to filter out premature entries. Rather than catching falling knives, we recommend a workflow based on Momentum Structure:
Strategy: Momentum Continuation (The HL/LH Setup)
The highest probability entries occur when momentum resets but the trend structure remains intact.
Trend Context:
Ensure the Trend Power Bar is Green (Bullish) or Red (Bearish).
Wait for Structure:
Do not buy the first dip. Wait for the Kinetic Core to print a Higher Low (HL) in a bullish trend or a Lower High (LH) in a bearish trend. This "Momentum Stair-Step" confirms that counter-trend energy has been exhausted.
The Trigger:
Enter when a Momentum Flip Circle (Dot) appears after this Higher Low or Lower High is established.
Exit:
Take profits when the Velocity Line spikes into the extremes or a Divergence line appears.
While powerful as a standalone unit, this engine is mathematically calibrated to pair with the Mkt-Viper Pro (Trend) and Mkt-Viper Edge (Structure) indicators.
Important:
This indicator is intended to be used with additional confluences and key areas. It is not recommended to blindly buy or sell the momentum flip dots.
🔶 Realistic Expectations & Methodology
Oscillator Lag:
All oscillators are derivative of price and inherently possess some lag. The "Kinetic" math reduces this lag significantly, but it cannot eliminate it entirely as it must process past data.
Signal Confirmation:
The "Flip Circles" and Reversal signals are confirmed on candle close. While they do not repaint history, they will wait for the bar to close before locking in. This is a safety feature to prevent fake-outs.
Trending vs. Ranging:
Oscillators perform best in Ranging markets or during Pullbacks in a trend. Using Overbought/Oversold signals blindly during a parabolic trend is dangerous, as momentum can stay "Overbought" for extended periods. Always check the Trend Power Bar context.
---------------------
Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, back test, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
DJ's Macro Catch-Up (BTC/NDX Ratio)Calculates the BTC/NDX ratio and plots the ratio line (white line)
Highlights the Background in Green specifically when a Bullish Divergence forms (Ratio makes a Lower Low, but RSI makes a Higher Low).
Look for the Green Zones: Don't buy in the green zone blindly. Wait for the White Line (Ratio) to cross above the Yellow Line (50 EMA). That is your confirmation that the rotation has started.
BUY/SELL SIGNALS FOR 5M TIMEFRAME (AVOID THE LADDER)Avoid the ladder which indicates that the market is flat. The farther from the latter the more profit potential and the steeper the line the more quickly the price will move. Trading black is considered counter trend trading and is not recommended due to high risk and low reward.
MACD Trend Count ScoreThis indicator is designed to confirm potential future trends in an asset’s price by analyzing the MACD histogram in the past. It works by counting positive and negative MACD bars within the selected chart timeframe to calculate a Strength Index, which reflects the past trend direction and intensity.
Summarizing the predominance of positive or negative bars across higher timeframes in the past such as daily, weekly, bi-weekly, and quarterly, it provides insight to anticipate how the trend may evolve in upcoming periods, according to the predetermined range scales Strong Bullish, Moderate Bullish, Neutral, Moderate Bearish and Strong Bearish.
Additionally, a dedicated module linked to the strength index is optimized for short-term charts (2-minute, 5-minute and 15-minute timeframes), making it a valuable tool for day trading strategies.
Enhanced MTF Bias Table by Odegos# Enhanced MTF Bias Table - Publication Description
## Short Description (for TradingView listing)
Multi-timeframe bias indicator combining Market Structure Shifts (MSS) with EMA analysis. Displays real-time bias across 7 timeframes (5m-Weekly) with distance metrics and volatility measurements. Perfect for identifying trend alignment and potential reversal points.
---
## Full Description
### Overview
The **Enhanced MTF Bias Table** is a comprehensive multi-timeframe analysis tool designed to help traders quickly identify market bias across different time horizons. By combining Market Structure Shift (MSS) detection with Exponential Moving Average (EMA) analysis, this indicator provides a clear, color-coded view of market sentiment from short-term (5-minute) to long-term (weekly) timeframes.
### What This Indicator Does
**Core Functionality:**
- **Multi-Timeframe Analysis**: Simultaneously monitors 7 different timeframes (5m, 15m, 30m, 1h, 4h, Daily, Weekly)
- **Market Structure Detection**: Identifies when price breaks previous swing highs/lows, indicating potential trend changes
- **EMA-Based Bias**: Combines market structure with price distance from a customizable EMA to determine bias strength
- **Visual Market Structure Shifts**: Draws horizontal lines on the chart when significant market structure shifts occur
- **Real-Time Metrics**: Displays distance from EMA and ATR (volatility) for each timeframe
### How It Works
**Bias Calculation Logic:**
The indicator uses a sophisticated two-factor approach to determine market bias:
1. **Market Structure Analysis**:
- Tracks swing highs and lows using pivot points
- Identifies when price breaks above previous highs (bullish structure) or below previous lows (bearish structure)
- Uses a customizable lookback period to filter noise
2. **EMA Distance Analysis**:
- Measures how far price is from the selected EMA
- Strong bias requires BOTH structure break AND significant distance from EMA
- Neutral zone prevents false signals when price consolidates near the EMA
**Bias Categories:**
- **Strong ↑** (Dark Green): Bullish market structure + price above EMA threshold
- **Weak ↑** (Light Green): Bullish structure OR price moderately above EMA
- **Neutral** (Orange): Price within neutral zone around EMA
- **Weak ↓** (Light Red): Bearish structure OR price moderately below EMA
- **Strong ↓** (Dark Red): Bearish market structure + price below EMA threshold
### Key Features
**📊 Customizable Table Display:**
- Two table styles: Compact (minimal) or Full (detailed with labels)
- 9 position options to fit any chart layout
- Toggle distance from EMA and ATR displays
- Shows current symbol, timeframe, and date
**📈 Flexible Indicator Settings:**
- Adjustable EMA length (default: 50)
- Customizable MSS lookback period (5-50 bars)
- Breakout threshold adjustment for different instruments
- Neutral zone configuration to reduce noise
**📍 Visual Market Structure Shifts:**
- Draws horizontal lines at significant structure breaks
- Customizable colors for bullish/bearish MSS
- Optional text labels ("MSS") for easy identification
- Adjustable line width and style (solid, dashed, dotted)
**📉 EMA Overlay:**
- Optional EMA display on chart
- Full customization: color, width, line style
- Helps visualize the reference point for bias calculations
**🎨 Full Color Customization:**
- Independent color controls for all bias levels
- Customize header and table appearance
- Matches any chart theme or preference
### Best Use Cases
**1. Trend Alignment:**
Use the MTF table to identify when multiple timeframes align in the same direction. When 5-6 or more timeframes show the same bias, it indicates strong directional momentum.
**2. Divergence Detection:**
Look for disagreements between timeframes. For example, if higher timeframes (Daily/Weekly) show bearish bias while lower timeframes (5m/15m) show bullish bias, it may indicate a counter-trend bounce or potential reversal setup.
**3. Entry Timing:**
Use higher timeframe bias for direction and lower timeframe bias for entry timing. Enter trades when your trading timeframe aligns with higher timeframe bias.
**4. Risk Management:**
When lower timeframes show opposite bias to higher timeframes, it suggests trading against the major trend—requiring tighter stops and smaller positions.
**5. Market Structure Confirmation:**
The MSS lines help identify key levels where market structure changed, useful for:
- Stop loss placement (below/above MSS levels)
- Target setting (previous structure points)
- Breakout confirmation
### Recommended Settings by Instrument
**Index Futures:**
- **ES (S&P 500)**: Breakout Threshold: 0.15%, Neutral Zone: 0.15%
- **NQ (Nasdaq)**: Breakout Threshold: 0.25%, Neutral Zone: 0.20%
- **YM (Dow Jones)**: Breakout Threshold: 0.20%, Neutral Zone: 0.20%
**Forex Pairs:**
- **Major Pairs**: Breakout Threshold: 0.10%, Neutral Zone: 0.10%
- **Volatile Pairs**: Breakout Threshold: 0.20%, Neutral Zone: 0.15%
**Cryptocurrencies:**
- Breakout Threshold: 0.30-0.50%, Neutral Zone: 0.25-0.40%
- Higher volatility requires larger thresholds
### Understanding the Metrics
**Distance from EMA (%):**
- Positive values = Price above EMA (bullish territory)
- Negative values = Price below EMA (bearish territory)
- Larger absolute values = Stronger deviation from mean
- Useful for identifying overextended moves
**ATR (%):**
- Measures current volatility as percentage of price
- Higher values = More volatile conditions
- Helps adjust position sizing and stop distances
- Compare across timeframes to see where volatility concentrates
### Tips for Optimal Use
1. **Start with higher timeframes**: Check Daily and Weekly bias first to understand the bigger picture
2. **Use the 50 EMA default**: It's widely used and provides reliable support/resistance
3. **Adjust MSS lookback for your style**: Lower values (5-7) for day trading, higher values (15-25) for swing trading
4. **Watch for neutral zones**: Orange/neutral readings often precede significant moves
5. **Combine with price action**: Use MSS lines as reference points for entries and exits
6. **Don't ignore weak signals**: "Weak" bias often precedes strong moves as structure builds
### What Makes This Different
Unlike simple moving average indicators, this script:
- Combines TWO confirmation factors (structure + distance) for more reliable signals
- Provides context across multiple timeframes simultaneously
- Visually marks important market structure changes on your chart
- Offers both compact and detailed display modes
- Includes volatility measurement to gauge market conditions
### Technical Notes
- Uses `request.security()` to fetch data from multiple timeframes
- Implements `pivothigh()` and `pivotlow()` for swing detection
- All calculations use `lookahead=barmerge.lookahead_off` to prevent repainting
- MSS lines drawn in real-time as structure breaks occur
- Optimized for performance with minimal script resources
### Disclaimer
This indicator is a tool for analysis and does not provide trading signals or financial advice. Always:
- Use proper risk management
- Combine with other forms of analysis
- Test thoroughly in a demo environment
- Understand that past performance doesn't guarantee future results
- Consider market conditions and fundamental factors
---
## Tags (for TradingView)
multi-timeframe, market-structure, bias, trend, EMA, momentum, support-resistance, price-action, volatility, ATR, swing-trading, day-trading
## Category
Trend Analysis / Multi-Timeframe Analysis
---
## Quick Start Guide
**For Day Traders:**
1. Add indicator to your chart
2. Focus on 5m, 15m, 30m, and 1h timeframes
3. Look for alignment across these timeframes
4. Use MSS lines as entry/exit reference points
**For Swing Traders:**
1. Add indicator to your chart
2. Focus on 4h, Daily, and Weekly timeframes
3. Wait for 2-3 timeframe alignment
4. Use lower timeframes only for entry timing
**For Position Traders:**
1. Add indicator to your chart
2. Focus on Daily and Weekly timeframes
3. Ignore short-term noise
4. Enter when both show same strong bias
Trading Checklist - POI & iFVG StrategyInspired by Navi Trades rules of trade engagement, I'm keeping it open on the side of the chart as reminder
Watch: www.youtube.com
Read: www.notion.so
Indicators Navi Uses:
iFVG:
CCT:
VWT:
Sessions: ICT Killzones + Pivots indicator
**Strategy**
**A+ Trade (Bullish Example):**
- Wait for a H1 candle to above virgin wick(s)
- Virgin wick(s) becomes H1 Bullish POIs
- Drop to M1 and look for price to trade under POI (can be wick or close)
- Then wait for a confirmed iFVG
- (iFVG can be on either side of POI)
- Limit order on confirmation of iFVG
**TP/SL:**
- SL: Just on the other side of the iFVG or the entry candle (which ever is further/safer)
- TP: Obvious DOL OR 2R is DOL is more than 2R away
- If DOL is significantly more than 2R away, I will widen the SL a bit and lessen the TP a bit
- No partial TP, No moving SL, No trailing, No breakeven. Either SL or TP
- Risk = 10% of drawdown ($200 for $50k Lucid accounts)
- Contract size will change depending on how far SL is so I can maintain same $ risk
**A+ Rules**
- Each POI is only valid for an hour
- If still in trade at end of hour, let it play out
- No entries from XX:51
- If price already delivers off POI without giving entry I will not consider it anymore
- There must be an obvious DOL - I will not target empty space
- 1.5R MINIMUM, 2R MAXIMUM
**A+ Process:**
- Wait for iFVG alert
- Check that none of the above rules have been breached
- Check if price engaged with respective POI (bullish/bearish) - this is where indicators help (personal preference) (you still need to understand the model)
- Limit order at iFVG confirmation
- SL on other side of iFVG or entry candle (which ever is further)
- TP at clear DOL (2R max)
- If DOL is a lot more than 2R away - can widen SL a bit
**Reminders**
- Process > Profits.
- A perfectly executed red day > poorly executed green day
- Follow your system.
- Trust your edge - trading is a probabilities game.
- You can lose more than half of your trades and STILL BE PROFITABLE
- There will be losses. That is a part of this business. There is no model in the world that has a 100% win rate.
- Be grateful for the opportunity to make magic internet monies by clicking buttons on a screen
Weighted Stochastic Oscillator [SeerQuant]Weighted Stochastic Oscillator (WSTO)
The Weighted Stochastic Oscillator (WSTO) is an enhanced stochastic-based trend oscillator that builds on the traditional %K/%D framework by introducing adaptive weighting and configurable smoothing. By dynamically amplifying the oscillator’s deviation from the 50 midline based on a selected market “weight” (Volume, Momentum, Volatility, or Reversion Factor), WSTO provides a cleaner view of trend strength and regime shifts—without relying on classic 80/20 overbought/oversold bands.
⚙️ How It Works
WSTO uses a standard stochastic calculation, measuring where price sits within its rolling high/low range over a lookback period. That %K is then “context-weighted” using your selected weighting method: Volume, Momentum, Volatility, or Reversion Factor.
The weighting is normalized for stability (so it doesn’t blow out during abnormal periods), then applied by amplifying the oscillator’s deviation from the 50 midline. In practice, this means strong conditions make the oscillator lean harder away from 50 (clearer trend), while quieter conditions keep it closer to traditional stochastic behaviour.
The weighted %K is then smoothed using your chosen moving average type, and a second smoothing pass generates the %D signal line. Trend logic is based on a neutral band around 50: bullish when the oscillator holds above (50 + Neutral Zone), bearish when it holds below (50 - Neutral Zone), and neutral while it remains inside that range.
✨ Customizable Settings
WSTO is built to be tuned without overcomplication. You can choose the stochastic source mode (Close, HLC3, OHLC4, or a custom input source), set the stochastic length, and control smoothing via separate %K and %D smoothing lengths.
You can also pick from a wide selection of moving average types (SMA, EMA, RMA, HMA, DEMA, TEMA, etc.) to match your style.
The weighting method is the core differentiator. Volume weighting emphasizes participation, Momentum weighting emphasizes directional impulse, Volatility weighting emphasizes expansion/contraction, and Reversion Factor weighting biases toward mean-reversion dynamics by responding inversely to variance. On the style side, you can select a preset colour scheme (Default/Modern/Cool/Monochrome) or enable custom bull/bear/neutral colours. Candle coloring is optional, and you can decide whether candles follow %K or %D.
🚀 Features and Benefits
WSTO gives you an alternative stochastic that adapts to market conditions instead of treating every regime the same. The weighting engine makes trend strength more obvious when conditions justify it, while the neutral-zone framework reduces noise compared to classic OB/OS bands. With flexible smoothing and clean visual state changes, it works well as a trend filter, a confirmation layer, or a regime signal alongside other systems.
📜 Disclaimer
This indicator is for educational purposes only and does not constitute financial advice. Past performance does not guarantee future results. Always consult a licensed financial advisor before making trading decisions. Use at your own risk.
Institutional Frontrunner w/ PCR & VIX - Fixed Distance LabelsUse this script to evaluate if buying or selling is indicated based on a variety of metrics surrounding momentum and volume or institutional traders.
BLACKBOX AI Trade Sniper [12CROWNS]BLACKBOX AI Trade Sniper
Stop guessing. Start targeting.
The BLACKBOX AI Trade Sniper is an institutional-grade algorithmic trading system designed exclusively for BLACKBOX Trade Journal Pro users. Built for precision scalping and swing trading, this tool eliminates market noise to reveal the true trend.
THE PROBLEM:
Most indicators lag or get chopped up in ranging markets, leading to false signals and drawdown.
THE SOLUTION:
The Trade Sniper synthesizes Renko Brick Construction with Heikin Ashi Smoothing to create a "MagLock" effect. It ignores minor price fluctuations and only fires a signal when a statistically significant structural break is confirmed by volatility (ATR).
---
MISSION CRITICAL FEATURES:
1. Renko-Based Trend Engine (Noise Cancellation)
Instead of reacting to every tick, the AI runs a background simulation using Dynamic Renko Bricks. It auto-adjusts to market volatility using Average True Range (ATR).
- Result: You stay in the trade during chop and only exit when the trend actually reverses.
2. Target Lock Visuals (The Cockpit)
A clean, military-inspired HUD keeps your chart professional and clutter-free.
- Green Target (⌖): Confirmed Bullish Structural Break (Long Entry).
- Red Target (⌖): Confirmed Bearish Structural Break (Short Entry).
- Yellow Warning: Early detection system signaling that price has moved 80% toward a reversal.
3. Volatility "G-Force" Filter
Bad trades happen in low volume. The integrated G-Force monitor analyzes real-time volume vs. baseline averages to filter out weak moves (Crab Market) and highlight high-conviction breakouts.
---
HOW TO USE:
- Scalpers: Use on lower timeframes (1m - 15m) to catch rapid trend shifts with the Renko Engine.
- Swing Traders: Use on higher timeframes (1H - 4H) to filter out intraday noise and ride major moves.
- Risk Management: Utilize the "Sniper Warning" (Yellow Target) to tighten stop-losses before a trend flip occurs.
ACCESS:
This is a proprietary Invite-Only Script protected by 12CROWNS. Access is restricted to active members of the BLACKBOX Trade Journal ecosystem.
For access details and documentation:
12crowns.com
Note: This tool does not repaint. All signals are confirmed upon candle close.
---
Keywords: Trend Analysis, Renko, Volatility, Buy Sell, Scalping, Algo Trading, Sniping, Support Resistance, 12CROWNS, BlackBox
Pivot, Breakout, Candle Patterns & Trading Session by JohnPowerful trading indicator showing 15-minute pivot highs and lows, breakout levels, and key candlestick patterns including Bullish/Bearish Engulfing and Morning/Evening Stars. Highlights strong and weak market conditions and tracks trading sessions in real-time. Ideal for scalping and day trading, helping traders spot entry and exit points with precision and confidence.
EMA Exhaustion + ContinuationA fast, mechanical scalping system that detects EMA exhaustion, filters with RSI, and manages exits plus continuations.
This indicator is designed for ultra‑short timeframe scalping, where speed and clarity matter more than anything else. It combines three core elements into one mechanical workflow:
- EMA Spread Exhaustion
The system measures the distance between fast and slow EMAs relative to ATR. When the spread reaches extreme levels and then begins to contract, it signals exhaustion — the point where momentum is likely to stall or reverse. This gives traders a structural way to identify setups without relying on subjective “feel.”
- RSI Filter (Accelerated for Scalping)
A shortened RSI (default length 7) is normalized by ATR to match the tempo of 15‑second scalps. This filter ensures that entries only trigger when momentum aligns with the exhaustion signal, reducing false positives and keeping trades in sync with volatility.
- Entry, Exit, and Continuation Logic
- Entries:
- Long entry triggers when spread retreats, EMA‑3 crosses price, and RSI confirms bearish exhaustion (RSI < 0).
- Short entry triggers under the opposite conditions (spread retreat, EMA‑3 cross, RSI > 0).
- Icons: Blue arrow up for longs, Red arrow down for shorts.
- Exits:
- Long exits occur when price closes below the 7 EMA smoothed by SMA‑2 while all EMAs are still sloping upward.
- Icon: Yellow cross above the candle.
- Continuations:
- Long continuation triggers when price dips below EMA‑9 and then reclaims above it.
- Short continuation triggers when price closes above EMA‑9 and then reclaims below it.
- Icons: Green triangle up for long continuation, Purple triangle down for short continuation.
----------------------------------------------------------------------------------------
- Apply the indicator to your chart. I use 15 second chart
- Watch for blue/red arrows — these are your primary entry signals.
- Respect yellow crosses — they mark mechanical exit points.
- Use green/purple triangles to re‑engage continuation trades after shallow pullbacks. I only take the first continuation signal above/below the 20 EMA.
- Keep the RSI filter active to avoid chasing false setups.
- Combine with your risk management rules (position sizing, stop placement) for full system integrity.
JMMF3 PANTOKRATOR V1.5.4 [update]This script implements an advanced market reading and diagnostic system based on a deterministic state architecture. Its design follows formal systems engineering principles and structural evaluation criteria, with the purpose of identifying valid operational contexts and vetoing those that do not meet the required conditions.
The system does not perform predictions and does not provide investment recommendations. Its function is strictly analytical and intended to support user decision making by offering an objective framework for market assessment across different operational states.
The script evaluates multiple market dimensions in a synchronized manner and only recognizes states that are fully validated by its internal architecture. There is no automated discretion and no trade execution. The user retains full responsibility for any operational decision at all times.
Access to this script is private and granted exclusively by invitation. Its use is limited to personal purposes and is non transferable. Any form of reproduction, redistribution, or reverse engineering is strictly prohibited.
This development does not constitute financial advice nor an automated trading system.
This script is available in both Spanish and English versions.
Perfect EQHs + EQLsPerfect EQHs + EQLs: High-Precision Liquidity Mapping
Identifying Equal Highs (EQH) and Equal Lows (EQL) is critical for traders who focus on liquidity, Internal Range Liquidity (IRL), and stop-hunts. This indicator is built for surgical precision, ensuring that only "mathematically perfect" levels are identified and projected until they are actually mitigated by price.
Key Features
Real-Time Mitigation: Lines are not static. As soon as price crosses a detected level (invalidating the liquidity), the line and label are instantly removed from the chart.
Dual Extension Modes: * Full Right Edge: Projects levels across the entire chart background for a clean, institutional look.
Bar Count: Extends lines a specific number of bars into the future (customizable).
Dynamic Sensitivity: Choose between a Dropdown Mode (pre-set for High, Medium, or Low sensitivity, including time-based filters for 1H and 4H+) or a Manual Bar Lookback to define exactly how many bars must separate the two points.
Smart Labels: Features "EQH" and "EQL" labels that anchor perfectly to the right edge of your lines, regardless of your zoom level or extension settings.
How to Use
Spot Liquidity Pools: Use the projected lines to identify where retail buy-side or sell-side liquidity is "resting."
Targeting: Use EQHs and EQLs as high-probability targets for your take-profits.
Entry Confirmation: Watch for price to sweep these levels (liquidity grab) before looking for a Market Structure Shift (MSS) in the opposite direction.
Customization Settings
Appearance: Full control over line colors (default Green for Highs, Red for Lows), thickness, and styles (Solid, Dash, Dotted).
Lookback Length: Define how far back the script scans for matches (supports up to 5,000 bars for deep historical analysis).
Label Visibility: Toggle labels on/off and adjust text size to fit your screen resolution.
Technical Note
Unlike basic fractal-based indicators, this script uses array-based state management to track every individual level. This ensures that the chart remains uncluttered by deleting old levels that are no longer relevant to current price action.
Golden Session ORB - Execution & Visualization Tool🎯 Optimize Your Execution with Golden Session ORB
The Golden Session ORB is a technical execution tool designed for traders who specialize in Opening Range Breakouts. Its primary goal is to provide a clean, professional visualization of liquidity levels across the three most critical trading sessions: Asia (18:00), NYC Pre-Market (08:00), and the Wall Street Open (09:30).
This script is not an automated signal system. It is a decision-support tool that manages range levels and visual structure, allowing the trader to focus exclusively on price action analysis and high-quality execution.
⏱️ Recommended Timeframes For optimal performance and precise box formation, this indicator should be used on:
1 Minute (1m): Ideal for observing the fine details of range formation and breakout precision.
15 Minutes (15m): Ideal for a clearer structural perspective of the session’s development.
💎 Key Features:
Automatic Multi-Session Structure: Automatically identifies and plots support and resistance levels from the opening minutes of each session.
Dynamic Extended Boxes: Ranges project forward automatically to help you identify key supply and demand zones throughout the day.
"Intention Candle" Visual Aid (Optional): The script highlights candles that show a confluence of volume and trend alignment (EMAs).
Note: These highlighted candles are NOT buy/sell alerts. They are a visual guide to help you identify moments of potential interest based on your own criteria.
📊 Backtesting & Risk Management This tool is perfect for manual backtesting, allowing you to study how price historically reacts to each session's levels.
Trading Recommendation: While opening range breakouts can lead to massive expansions, markets remain volatile. It is highly recommended to secure partial profits during the move and actively manage your risk to protect your capital from sudden price reversals.
