Auf geht's

In den Scripts nach "汇丰股票25" suchen

VHF Adaptive ADXm [Loxx]VHF Adaptive ADXm is a variation of the ADX DI indicator with adaptive filtering using a vertical horizontal filter. What is ADXm? Unlike the traditional ADX indicator, where the ADX itself is plotted in absolute units and detection of the trend direction is hindered, this indicator clearly displays the positive and negative ADX half-waves (displayed as colored on the chart). And the DI+/- signals are displayed as their difference (gray). The method of using this indicator is the same as the traditional one. In addition, it displays the levels (dashed), above which the market is considered to be in a trend state. This level is usually set to approximately 20-25 percents--somewhat depends on the time frame it is used on. What is VHF Adaptive Cycle? Vertical Horizontal Filter (VHF) was created by Adam White to identify trending and ranging markets. VHF measures the level of trend activity, similar to ADX DI. Vertical Horizontal Filter does not, itself, generate trading signals, but determines whether signals are taken from trend or momentum indicators. Using this trend information, one is then able to derive an average cycle length. Included: Bar coloring Alerts Signal types: zero-line crosses, level crosses, or signal crosses
Pine Script® Indikator
von loxx
4
Eurobond CurveABOUT Dynamically plots 3 no. forward EUROBOND curves. When the curves converge (or worse crossover) there is higher risk of financial uncertainty and potential market correction. The Eurobond Curves work in a similar way to treasury "yield curve inversion"; except the EUROBOND curves can signal much earlier than Treasuries therefore providing a leading indicator. The indicator looks the the "near" (next year EUROBOND), "mid" (EUROBOND 2 years out) and "far" (EUROBOND 5 years out) to assess for crossovers. When the "near" and "mid" curves crossover the "far" curve, concerning economic conditions are developing and it may be a good idea to reduce risk exposure to markets. LIMITATIONS The EUROBOND curve crossover events are rare, and this indicator uses data back to 2005 (using approximately 25 TradingView security functions). Given there are relatively few crossover events, the reliability of this indicator should be considered low. Nonetheless, there is decent alignment with treasury yield curve inversions in the 20 year period assessed. Given treasury yield curve inversions have predicted every recession for the last 70 years, we still think the EUROBOND Curves are a useful datapoint to monitor into the future and provide confluence to other risk management strategies.
Pine Script® Indikator
von capriole_charles
Chart VWAP█   OVERVIEW This indicator displays a ​Volume-Weighted Average Price anchored to the leftmost visible bar of the chart. It dynamically recalculates when the chart's visible bars change because you scroll or zoom your chart. If you are not already familiar with ​VWAP, our Help Center will get you started. The typical ​VWAP is designed to be used on intraday charts, as it resets at the beginning of the day. Our Rolling ​VWAP , instead, resets on a rolling time window. You may also find the VWAP Auto Anchored built-in indicator worth a try. █   HOW TO USE IT Load the indicator on an active chart (see the Help Center if you don't know how). By default, it displays the chart's ​VWAP in orange and a simple average of the chart's visible close values in gray. This average can be used as a companion to the ​VWAP, since both are calculated from the same set of bars. The script's settings allow you to hide it. You may also use the script's settings to enable the display of the chart's OHLC (open, high, low, close) levels and the values of the high and low. These are also calculated from the range of visible bars. You can complement the high and low lines with their price and their distance in percent from the chart's latest visible close . You can use the levels to quickly identify the distances from extreme points in the visible price range, as well as observe the visible chart's beginning and end prices. █   NOTES FOR Pine Script™ CODERS This script showcases three novelties:  • Dynamic recalculation on visible bars  • The VisibleChart library by PineCoders  • The new `anchor` parameter of ta.vwap() Dynamic recalculation on visible bars This script behaves in a novel way made possible by the recent introduction of two new built-in variables: chart.left_visible_bar_time and chart.right_visible_bar_time , which return the opening time of the leftmost and rightmost visible bars on the chart. These are only two of many new built-ins in the `chart.*` namespace. See this blog post for more information, or look up them up by typing "chart." in the Pine Script™ Reference Manual . Any script using chart.left_visible_bar_time or chart.right_visible_bar_time acquires a unique property, which triggers its recalculation when traders scroll or zoom their chart, causing the range of visible bars to change. This new capability is what makes it possible for this script to calculate its ​VWAP on the chart's visible bars only, and dynamically recalculate if the user scrolls or zooms their chart. This script is just a start to the party; endless uses for indicators that redraw on changes to the chart will no doubt emerge through the hands of our community's Pine Script™ programmers. The VisibleChart library by PineCoders The newly published VisibleChart library is designed to help programmers benefit from the new capabilities made possible by the fact that Pine Script™ code can now tell when it is executing on visible bars. The library's description, functions and example code will help programmers make the most of the new feature. This script uses three of the library's functions:  • `PCvc.vVwap()` calculates a ​VWAP for visible bars. ​​​​ • `PCvc.​avg()` calculates the average of a source value for visible bars only. We use it to calculate the average close (the default source).  • `PCvc.chartXTimePct(25)` calculates a time value corresponding to 25% of the horizontal distance between visible bars, starting from the left. The new `anchor` parameter of ta.vwap() Our script also uses this new `anchor` parameter to reset the ​VWAP at the leftmost visible bar. See how simple the code is for the VisibleChart library's `vVwap()` function. Look first. Then leap.
Pine Script® Indikator
von TradingView
17
VXD Cloud EditionVXD Cloud Edition. to overcome sideways market conditions this cloud configured for low timeframe. every TA is same as VXD Supercycle but show as cloud. Symbols on chart show Premium and Discount Prices X-Cross = Engulfing Candle with weak volume . O-circle - Engulfing Candle with strong volume . Pivot point and Rejected Block Pivot show last High and low of a price in past bars Rejected Block show when that High or Low price are important level to determined if it's Hidden Divergence or Divergence (with RSI) Setting Momentum: RSI = 25 , RSI MA = 14 Trend: Rolling VWAP and ATR and Subhag (Everthing show as a cloud) Trailing STOP: ATR 12 x 2.4 Highlight Bars color when volume is above SMA 6 SMA200 act as TP Line Risk:Reward Calculation if Buy your Stoploss will be previous Pivot low if Sell your Stoploss will be previous Pivot high and TP line will be calculated form there, then show in Orange color line Buy condition : Close is above Cloud and close above pivot high Sell condition : Close is below Cloud and close below pivot low Trip : add this to alerts setting. Order {{strategy.order.action}} filled on {{ticker}} @ {{strategy.order.price}} {{strategy.order.alert_message}}.
Pine Script® Strategie
von Vvaz_
59
Nifty & BN 2 Candle Theory Back Testing and Alert Notification How To Initiate Long Trade-in Index Future/ Buy Call Options – 3 Min TF ▪ If The Index Futures Trades Above The VWAP, the Following Parameters are Checked For 2 Candle Theory on the long side ▪ RSI Trades Above 50 & Between 50-75/80 ▪ Volume Of 2 Consecutive Bars Is Above 50 K for BN & 125 K For Nifty ▪ All the indicators (Parabolic SAR, Super Trend, VMA, VWAP) Below the Candles ▪ When the above conditions are met enter In 3rd Candle, With 1st Candle High As SL How I Initiate Short Trade-In Index Future/ Buy Put Options – 3 Min TF ▪ If The Index Futures Trades Below The VWAP, the Following Parameters are Checked For 2 Candle Theory on the short side ▪ RSI Trades Below 40 & Between 40-25/20 ▪ Volume Of 2 Consecutive Bars Is Above 50 K for BN & 125 K For Nifty ▪ All the Indicators (Parabolic SAR, Super Trend, VMA, VWAP) Above The Candles ▪ When the above conditions are met enter In 3rd Candle, With 1st Candle High As SL The indicator checks the above and notifies to enter a long trade and short trade respectively. There is also volume cutoff and change in the volumes respectively, also non-trading times that can be set.
Pine Script® Strategie
von abdullabashaa
5
Bitcoin OnChain & Other MetricsHi all,   In these troubled times, going back to fundamentals can sometimes be a good idea 😊 I put this one up using data retrieved from “Nasdaq Data Link” and their “Blockchain.com” database. Here is a good place to analyses some Bitcoin data “outside” its price action with 25 different data sets. Just go to the settings menu and display the ones you are interested in. If you want me to add more metrics, feel free to DM or comment below!   Hope you enjoy 😉  
Pine Script® Indikator
von LucasVivien
ENVELOPE RSI - Buy Sell SignalsThis indicator is mainly based on Overbought and Oversold . Indicator for short-term trading. This way you can get small but acceptable signals. The main basis of the indicator is as follows: To buy, the indicator is waiting for the instrument to be oversold from the RSI point of view. Then, if the chart crosses the bottom line of the Envelope indicator from the bottom to the top, a buy signal is issued. For sell, the indicator waits for the instrument to be overbought from the RSI perspective. Then, if the chart crosses the top line of the Envelope indicator from top to bottom, a sell signal is issued. The general basis is the consonance of the price and the RSI indicator . The best settings I came up with myself: Time frame: 15 minutes Overbought: 80 Oversell: 25 RSI Length: 8 It can be done on different instruments. But always set your profit and loss limits. (Profit to loss ratio in this indicator can be 1: 1.) Disclaimer : This information and trading indicators and tools provided neither is, nor should be construed, as an offer, or a solicitation of an offer, to buy or sell securities. You shall be fully responsible for any investment decision you make, and such decisions will be based solely on your evaluation of your financial circumstances, investment objectives, risk tolerance, and liquidity needs. I am not liable for any profit, financial improvement, losses or damages, monetary or other that may result from the application of information contained within this indicator. Individual traders must use their own due diligence in analyzing featured trading indicators, other trading tools, webinars and other educational materials to determine if they represent suitable and useable features and capabilities for the individual trader.
Pine Script® Indikator
von Saleh_Toodarvari
39
ATR and IV Volatility TableThis is a volatility tool designed to get the daily bottom and top values calculated using a daily ATR and IV values. ATR values can be calculated directly, however for IV I recommend to take the values from external sources for the asset that you want to trade. Regarding of the usage, I always recommend to go at the end of the previous close day of the candle(with replay function) or beginning of the daily open candle and get the expected values for movements. For example for 26April for SPX, we have an ATR of 77 points and the close of the candle was 4296. So based on ATR for 27 April our TOP is going to be 4296 + 77 , while our BOT is going to be 4296-77 At the same time lets assume the IV for today is going to be around 25% -> this is translated to 25 / (sqrt (252)) = 1.57 aprox So based on IV our TOP is going to be 4296 + 4296 * 0.0157 , while our BOT is going to be 4296 - 4296 * 0.0157 I found out from my calculations that 80-85% of the times these bot and top points act as an amazing support and resistence points for day trading, so I fully recommend you to start including them into your analysis. If you have any questions let me know !
Pine Script® Indikator
von exlux
4
Realtime FootprintThe purpose of this script is to gain a better understanding of the order flow by the footprint. To that end, i have added unusual features in addition to the standard features. I use "Real Time 5D Profile by LucF" main engine to create basic footprint(profile type) and added some popular features and my favorites. This script can only be used in realtime, because tradingview doesn't provide historical Bid/Ask date. Bid/Ask date used this script are up/down ticks. This script can only be used by time based chart (1m, 5m , 60m and daily etc) This script use many labels and these are limited max 500, so you can't display many bars. If you want to display foot print bars longer, turn off the unused sub-display function. Default setting is footprint is 25 labels, IB count is 1, COT high and Ratio high is 1, COT low and Ratio low is 1 and Delta Box Ratio Volume is 1 , total 29. plus UA , IB stripes , ladder fading mark use several labels. ///////// General Setting /////////// Resets on Volume / Range bar : If you want to use simple time based Resets on, please set Total Volume is 0. Your timeframe is always the first condition. So if you set Total Volume is 1000, both conditions(Volume >= 1000 and your timeframe start next bar) must be met. (that is, new footprint bar doesn't start at when total volume = exactly 1000). Ticks per row and Maximum row of Bar : 1 is minimum size(tick). "Maximum row of Bar" decide the number of rows used in one footprint. 1 row is created from 1 label, so you need to reduce this number to display many footprints (Max label is 500). Volume Filter and For Calculation and Display : "Volume Filter" decide minimum size of using volume for this script. "For Calculation and Display" is used to convert volume to an integer. This script only use integer to make profile look better (I contained Bid number and Ask number in one row( one label) to saving labels. This require to make no difference in width by the number of digits and this script corresponds integers from 0 to 3 digits). ex) Symbol average volume size is from 0.0001 to 0.001. You decide only use Volume >= 0.0005 by "Volume Filter". Next, you convert volume to integer, by setting "For Calculation and Display" is 1000 (0.0005 * 1000 = 5). If 0.00052 → 5.2 → 5, 0.00058 → 5.8 → 6 (Decimal numbers are rounded off) This integer is used to all calculation in this script. //////// Main Display /////// Footprint, Total, Row Delta, Diagonal Delta and Profile : "Footprint" display Ask and Bid per row. "Total" display Ask + Bid per row. "Row Delta" display Ask - Bid per row. "Diagonal Delta" display Ask(row N) - Bid(row N -1) per row. Profile display Total Volume(Ask + Bid) per row by using Block. Profile Block coloring are decided by Row Delta value(default: positive Row Delta (Ask > Bid) is greenish colors and negative Row Delta (Ask < Bid) is reddish colors.) Volume per Profile Block, Row Imbalance Ratio and Delta Bull/Bear/Neutral Colors : "Volume per Profile Block" decide one block contain how many total volume. ex) When you set 20, Total volume 70 display 3 block. The maximum number of blocks that can be used per low is 20. So if you set 20, Total volume 400 is 20 blocks. total volume 800 is 20 blocks too. "Row Imbalance Ratio" decide block coloring. The row imbalance is that the difference between Ask and Bid (row delta) is large. default is x3, x2 and x1. The larger the difference, the brighter the color. ex) Ask 30 Bid 10 is light green. Ask 20 Bid 10 is green. Ask 11 Bid 10 is dark green. Ask 0 Bid 1 is light red. Ask 1 Bid 2 is red. ask 30 Bid 59 is dark green. Ask 10 Bid 10 is neutral color(gray) profile coloring is reflected same row's other elements(Ask, Bid, Total and Delta) too. It's because one label can only use one text color. /////// Sub Display /////// Delta, total and Commitment of Traders : "Delta" is total Ask - total Bid in one footprint bar. Total is total Ask + total Bid in one footprint bar. "Commitment of traders" is variation of "Delta". COT High is reset to 0 when current highest is touched. COT Low is opposite. Basic concept of Delta is to compare price with Delta. Ordinary, when price move up, delta is positive. Price move down is negative delta. This is because market orders move price and market orders are counted by Delta (although this description is not exactly correct). But, sometimes prices do not move even though many market orders are putting pressure on price , or conversely, price move strongly without many market orders. This is key point. Big player absorb market orders by iceberg order(Subdivide large orders and pretend to be small limit orders. Small limit orders look weak in the order book, but they are added each time you fill, so they are more powerful than they look.), so price don't move. On the other hand, when the price is moving easily, smart players may be aiming to attract and counterattack to a better price for them. It's more of a sport than science, and there's always no right response. Pay attention to the relationship between price, volume and delta. ex) If COT Low is large negative value, it means many sell market orders is coming, but iceberg order is absorbing their attack at limit order. you should not do buy entry, only this clue. but this is one of the hints. "Delta, Box Ratio and Total texts is contained same label and its color are "Delta" coloring. Positive Delta is Delta Bull color(green),Negative Delta is Delta Bear Color and Delta = 0 is Neutral Color(gray). When Delta direction and price direction are opposite is Delta Divergence Color(yellow). I didn't add the cumulative volume delta because I prefer to display the CVD line on the price chart rather than the number. Box Ratio , Box Ratio Divisor and Heavy Box Ratio Ratio : This is not ordinary footprint features, but I like this concept so I added. Box Ratio by Richard W. Arms is simple but useful tool. calculation is "total volume (one bar) divided by Bar range (highest - lowest)." When Bull and bear are fighting fiercely this number become large, and then important price move happen. I made average BR from something like 5 SMA and if current BR exceeds average BR x (Heavy Box Ratio Ratio), BR box mark will be filled. Box Ratio Divisor is used to good looking display(BR multiplied by Box Ratio Divisor is rounded off and displayed as an integer) Diagonal Imbalance Count , D IB Mark and D IB Stripes : Diagonal Imbalance is defined by "Diagonal Imbalance Ratio". ex) You set 2. When Ask(row N) 30 Bid(row N -1)10, it's 30 > 10*2, so positive Diagonal Imbalance. When Ask(row N) 4 Bid(row N -1)9, it's 4*2 < 9, so negative Diagonal Imbalance. This calculation does not use equals to avoid Ask(row N) 0 Bid(row N -1)0 became Diagonal Imbalance. Ask(row N) 0 Bid(row N -1)0, it's 0 = 0*2, not Diagonal Imbalance. Ask(row N) 10 Bid(row N -1)5, it's 10 = 5*2, not Diagonal Imbalance. "D IB Mark" emphasize Ask or Bid number which is dominant side(Winner of Diagonal Imbalance calculation), by under line. "Diagonal Imbalance Count" compare Ask side D IB Mark to Bid side D IB Mark in one footprint. Coloring depend on which is more aggressive side (it has many IB Mark) and When Aggressive direction and price direction are opposite is Delta Divergence Color(yellow). "D IB Stripes" is a function that further emphasizes with an arrow Mark, when a DIB mark is added on the same side for three consecutive row. Three consecutive arrow is added at third row. Unfinished Auction, Ratio Bounds and Ladder fading Mark : "Unfinished Auction" emphasize highest or lowest row which has both Ask and Bid, by Delta Divergence Color(yellow) XXXXXX mark. Unfinished Auction sometimes has magnet effect, price may touch and breakout at UA side in the future. This concept is famous as profit taking target than entry decision. But, I'm interested in the case that Big player make fake breakout at UA side and trapped retail traders, and then do reversal with retail traders stop-loss hunt. Anyway, it's not stand alone signal. "Ratio Bounds" gauge decrease of pressure at extreme price. Ratio Bounds High is number which second highest ask is divided by highest ask. Ratio Bounds Low is number which second lowest bid is divided by lowest bid. The larger the number, the less momentum the price has. ex)first footprint bar has Ratio Bounds Low 2, second footprint bar has RBL 4, third footprint bar has RBL 20. This indicates that the bear's power is gradually diminishing. "Ladder fading mark" emphasizes the decrease of the value in 3 consecutive row at extreme price. I added two type Marks. Ask/Bid type(triangle Mark) is Ask/Bid values are decreasing of three consecutive row at extreme price. Row Imbalance type(Diamond Mark) are row Imbalance values are decreasing of three consecutive row at extreme price. ex)Third lowest Bid 40, second lowest Bid 10 and lowest Bid 5 have triangle up Mark. That is bear's power is gradually diminishing. (This Mark only check Bid value at lowest price and Ask value at highest price). Third highest row delta + 60, second highest row delta + 5, highest delta - 20 have diamond Mark. That is Bull's power is gradually diminishing. Sub display use Delta colors at bottom of Sub display section. ////// Candle & POC ///////// candle and POC : Ordinary, "POC" Point of Control is row of largest total volume, but this script'POC is volume weighted average. This is because the regular POC was visually displayed by the profile ,and I was influenced LucF's ideas. POC coloring is decided in relation to the previous POC. When current POC is higher than previous POC, color is UP Bar Color(green). In the opposite case, Down Bar color is used. POC Divergence Color is used when Current POC is up but current bar close is lower than open (Down price Bar),or in the opposite case. POC coloring has option also highlight background by Delta Divergence Color(yellow). but bg color is displayed at your time frame current price bar not current footprint bar. The basic explanation is over. I add some image to promote understanding basic ideas.
Pine Script® Indikator
von akutsusho
65
Money Flow Index With Bullish & Bearish SignalsMONEY FLOW INDEX WITH BULLISH AND BEARISH SIGNALS Money Flow Index shows whether money is coming into the market or going out of the market. This can be used to gauge market sentiment and whether people are buying or selling at the current price. ***HOW TO USE*** If the MFI line is green, it is above the 50 line and in a bullish trend. If the MFI line is red, it is below the 50 line and in a bearish trend. If the background color is green, Money Flow is in a bullish trend, holding above the 50 line. If the background color is red, Money Flow is in a bearish trend, holding below the 50 line. If the MFI is above the 75 level it indicates a possible top or overbought conditions. If the MFI is below the 25 level it indicates a possible bottom or oversold conditions. ***BULLISH/BEARISH LABELS*** There is also a label on the right side that tells you whether the overall trend is bullish or bearish, if there is a possible bottom or top and if the current money flow index is going up or down. This table updates in real time and changes colors so you can get an easy, quick interpretation of the current money flow without having to look at the data so you can make faster decisions on whether to enter or exit a trade. The flashing from red to green or the opposite also grabs your attention so you know immediately if there is a change in trend. The table changes colors in sync with the MFI line and it's trends and bottom/top areas. Green means money is coming in. Red means money is going out. Blue means a neutral amount of money flow. ***MARKETS*** This indicator can be used as a signal on all markets, including stocks, crypto, futures and forex. ***TIMEFRAMES*** This Money Flow Index indicator can be used on all timeframes. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are our Auto Fibonacci, DMI, Momentum, Auto Support And Resistance and Volume Profile in combination with this Money Flow Index. They all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
Pine Script® Indikator
von FriendOfTheTrend
9
Measure Volume, Momentum, Trend, VolatilityThis script displays the following indicators in one pane to quickly determine several important factors regarding price action. It allows the user to quickly see all of most important factors surrounding price action in one pane with one quick glance. This should be incredibly helpful and allow things like double divergence and trend confirmation to be spotted much more quickly. I personally use the data in this indicator to replace four separate indicators and it has brought my win rate and profit factor significantly higher. I hadn't seen any place where all of the best J. Welles Wilder indicators such as RSI, Parabolic SAR, and DMI/ADX were brought into one easy to use interface. This is my attempt at fixing that gap. For a much deeper understanding of how to use these indicators, I recommend reading New Concepts in Technical Trading Systems written by J. Welles Wilder. Momentum via RSI (Relative Strength Index) Volume via MFI (Money Flow Index) Volatility via DMI/ADX (Direction Movement Index/Average Directional Index) Trend via Parabolic SAR (Parabolic Stop and Reverse) It is worth noting that DMI/ADX and Parabolic SAR can both help determine trend strength and volatility. The Volatility mechanism is measured by DMI and ADX and displayed at the top of the pane using circles. The top, tiny circles reflect if show if positive DI or negative DI has a higher value. The small circles directly underneath indicate whether or not the ADX is above 20 (configurable, some may choose to increase this to 25 or even 30). The Momentum mechanism is shown as standard RSI with the default being a white line and default period of 14, which is all configurable. The Volume mechanism is shown as standard MFI with the default being a fuchsia line and default period of 14, which is also configurable. The momentum and volume oscillators should be used in conjunction to help spot whether the trend is strong or weak using divergences and the middle, overbought, and oversold levels. These levels are also configurable. The Trend mechanism is measured by Parabolic SAR and displayed at the bottom of the pane using diamonds. The default is red diamonds when in a bear trend, green when in an uptrend which is configurable. When price is above the Parabolic SAR, it is considered to be an uptrend. When price is below the Parabolic SAR, it is considered to be a downtrend. The way price is measured is also configurable (i.e. open, close, ohlc4, hlc3, etc.). When price crossed above or below the Parabolic SAR, the diamonds will change colors. All the indicators displayed should be used in a well rounded strategy. For instance, I only trade when ADX is above 20 and rarely trade against the trend shown via PSAR. When trend shifts and divergences helped indicate a trend shift would occur using the RSI and MFI, it can be a great spot to take an entry. RSI/MFI can also confirm the trend is strong when they are not showing divergences and inline with price action. All of this data should be used in conjunction with good fundamental data and technical levels. Divergences with RSI and MFI on double tops or bottoms can also be incredibly powerful. There is no right or wrong way to use all the data displayed in this indicator, however using all four pillars of trading (Momentum, Volume, Trend, Volatility) will help ensure only the best trades are taken.
Pine Script® Indikator
von kfatkin
10
TASC 2022.04 S&P500 Hybrid Seasonal System█  OVERVIEW TASC's April 2022 edition of Traders' Tips includes the "Sell In May? Stock Market Seasonality" article authored by Markos Katsanos. This is the code implementing the "Hybrid ​Seasonal System" from the article. █  CONCEPTS In his article, Markos Katsanos takes an updated look at the "Sell in May" adage by reviewing recent historical data for ​seasonal equity market tendencies. The author explores the development of a trading strategy (a set of buy and sell rules) based on this research. He starts from the enhanced buy & hold system featured in his July 2021 TASC article, and adds additional technical conditions. These include volatility conditions ( VIX and ATR ) plus the "Volume Flow Indicator" (VFI), which is a custom money flow indicator that Katsanos introduced in his June 2004 TASC article. He provides an example of a trading system that others can test for themselves and modify as they see fit. The author notes that the system could likely be improved further by adding money management conditions (such as a stop-loss), or by adding more technical conditions not considered in the ​scope of this article. █  CALCULATIONS The entry and exit rules that constitute the trading system are defined below. The critical values of ​VIX, ​ATR and VFI (specified below) used in the calculations were determined by optimization for a daily chart of the SPY ETF . By default, the strategy only allows long entries. However, the script offers the possibility to initiate short entries upon exiting long trades through the "Long Only" toggle in the script's inputs. Long Entry Rules ​• Seasonal: The ​seasonal trade is initiated on the first business day October at the open. • Volatility: In case of high ​volatility, that is if the ​VIX is above 60% or the 15-day ​​ATR was above 90% over the past 25 days, the ​seasonal trade is deferred until later in the month or year, when the ​volatility subsides. Exit/Short Entry Rules • Seasonal: The exit/short signal is triggered on the first business day of August at the open. • Volatility: The exit/short signal is triggered if ​VIX is above 120 % (i.e. 2 times the corresponding threshold parameter). • Money flow (VFI): The exit/short signal is triggered if the VFI crosses under a critical value (-20) while its 10-day moving average is pointing down. Join TradingView!
Pine Script® Strategie
von PineCodersTASC
2
Stochastic & MAThis trading system comes from the experience of having a "fast" signal for entry at low prices (such as the stoscastic) and then "following" the stock with a "slower" indicator such as the exponential moving average. Both the input and output signals are filtered. The use of the trading system only carries out long operations and has been tested on shares and ETFs, including indices, on daily bases (End Of Day). ENTRY CONDITION: when stochastic's k is higher than d (on the default value of 21 periods) we enter the lower part of the oversold, to which we apply a filter or the confirmation that the closing of the day of the crossing is higher than that of the n -th previous bar (the 2nd previous bar recommended). Other default settings are k = 6 and d = 4; the oversold level is also customizable (recommended = 25). EXIT CONDITIONS: once the entry has "gone well", we follow the upward trend of the stock not with a stochastic oscillator - which tends to exit too soon, especially in case of strong trends - but with a simple moving average exponential (by default at 38 periods). Also in this case a filter is added, that is, k must be> to a filter threshold (recommended = 65) which is used to distinguish the decline between a "physiological" tracking. "(k drops" slowly "together with the approach of prices to the moving average) from a more" violent "tracking (prices are below the moving average and k consequently fall" suddenly ", in a few bars). MONEY MANAGEMENT: 13% stop loss inserted (the physiological level of tracking of the shares is generally max 8-12% so we also consider a 1% margin due to trading). For more volatile stocks, the level can be extended to 20%. LEVERAGE: the default value is equal to 1, but it is advisable, for simulations on shares, to use higher levers (x2, x3, ...) if you trade the relative CFD or on the index in case of buying and selling of Leveraged ETFs (e.g. LEVMIB which is 2x leveraged ETFs on Italian index).
Pine Script® Strategie
von saucius
1
ADR label/ // To quote @qullamaggie: " High ADR is Gold, low ADR is shit..." // Hence we display the ADR (Average Daily Range) in percent. // // We also calculate and display Long Stop-Loss suggestions. // 1. Using the ATR times a multiple. // 2. Using a percentage. // // We also calculates the Trend Template as described by Mark Minervini in his book: "Trade like a stock market wizard" // For a stock to be considered all the rules has to be fullfilled. // The only rule this indicator doesn't implement is the IBD Relative Strength ranking. // // Rules: // close > MA-50 > MA-150 > MA-200 , each condition that is true gets one point. // The current stock price is at least 30 percent above its 52-week low, gets one point // The current stock price is within at least 25 percent of its 52-week high, gets one point. // The 200-day moving average line is trending up for at least 1 month (preferably 4–5 months), gets one point. // // When we get 6 points, all the rules are fullfilled and we display an OK; // else we show the number of points (X). //
Pine Script® Indikator
von kruskakli
1
[blackcat] L3 DMIQLevel: 3 Background The directional movement index (DMI) is an indicator developed by J. Welles Wilder in 1978 that identifies in which direction the price of an asset is moving. The indicator does this by comparing prior highs and lows and drawing two lines: a positive directional movement line (+DI) and a negative directional movement line (-DI). An optional third line, called the average directional index (ADX), can also be used to gauge the strength of the uptrend or downtrend. Function When +DI is above -DI, there is more upward pressure than downward pressure in the price. Conversely, if -DI is above +DI, then there is more downward pressure on the price. This indicator may help traders assess the trend direction. Crossovers between the lines are also sometimes used as trade signals to buy or sell. The directional movement index (DMI) is a technical indicator that measures both the strength and direction of a price movement and is intended to reduce false signals. The DMI utilizes two standard indicators, one negative (-DM) and one positive (+DN), in conjunction with a third, the average directional index (ADX), which is non-directional but shows momentum. The larger the spread between the two primary lines, the stronger the price trend. If +DI is way above -DI the price trend is strongly up. If -DI is way above +DI then the price trend is strongly down. ADX measures the strength of the trend, either up or down; a reading above 25 indicates a strong trend. Remarks Free and Open Source Alerts are added.
Pine Script® Indikator
von blackcat1402
1
Overbought & Oversold TrackerAbout this indicator: - This indicator is basically a stochastic indicator that shows to you the crossover in an Overbought or Oversold area DIRECTLY on the chart How does it works: - When Stochastic crosses at Oversold area, a Blue Triangle will appear below the candle with a Blue Dotted Line at the low of the current candle - The Blue Triangle is to help you to see easily the candle where the crossover is occurring - At the same time, the Blue Dotted Line will act as a minor Support for the current price - If the current candle breaks the Blue Dotted Line (minor Support), the candle will be displayed in a red color - Same things will occur if Stochastic crosses at the Overbought area, but at this time, a Red Triangle with Red Dotted Line will appear just to differentiate between Overbought and Oversold crossover The advantage of using this indicator: - You can easily see the point of stochastic crossover DIRECTLY on the chart without analyzing the stochastic indicator - At the same time, it helps you to see clearly either the price is at the bottom / reversal by combining it with S&R / trendlines or other indicators Personally, I will combine this indicator with: a. Support and Resistance or Trendlines b. Fibonacci retracement c. Candlestick indicator (see my script list) d. Ultimate MACD (see my script list) e. Volume indicator These combinations personally increase the possibility for me to buy exactly at the point of reversal in a pullback - This indicator is preset at the value of 25 (oversold) and 75 (overbought) k line, it's my own preference. You can change these values at the setting menu to suit your trading style. - Once again, I am opening the script for anyone to modify/alter it based on you own preference. Have a good day!
Pine Script® Indikator
von taufan_ganas
4
Relative Strength Exponential Moving Average [CC]The Relative Strength Exponential Moving Average was created by Vitali Apirine (Stocks and Commodities Jan 2022 pgs 22-25) and this is a handy moving average that combines a typical overbought/oversold mechanic with an overall trend indicator. Even though the typical length is so large it reacts extremely quickly when the stock becomes overbought or oversold. Because of this the indicator by itself doesn't work as well during choppy periods so Vitali recommends using a moving average crossover system during choppy so do one indicator with the default length of 50 and use a different length of 10 so when the shorter length crosses over the longer length then buy and vice versa you would sell. Generally speaking buy when the line turns green and sell when it turns red. I have used strong buy and sell signals in addition to normal signals so strong signals are darker in color and normal signals are lighter in color. Let me know if there are any other scripts or indicators you would like me to publish!
Pine Script® Indikator
von cheatcountry
6
Value-at-Risk Value-at-Risk is a risk measurement tool widely used by banks and institutions. This script uses historical simulation method for the calculation of VaR. The default settings are 250-days period. 1 percentile (or 99 percentile confidence level.) This means the daily loss for the past 250 days should not exceed the risk measure 99% of the time. traders can calculate the desired level of risk by converting the timeframe OR by multiplying the square root (expected holding period) to find out the VaR value for 5 days, 25 days, 250 days etc. Do take note that the default assumes a long position, if you are taking a short position, the percentile value has to be adjusted accordingly (to find the worst 1 percent loss for shorts will require changing the input to 99)
Pine Script® Indikator
von Yuhui_w
2