Auf geht's

In den Scripts nach "session" suchen

Session SFPThis script is a powerful, multi-timeframe tool designed to identify high-probability Swing Failure Patterns (SFPs) at key historical levels. Instead of looking for traditional "pivots" (like a 3-bar swing), this indicator finds the actual high and low of a previous higher-timeframe (HTF) bar (e.g., the previous weekly high/low) and waits for a lower-timeframe (LTF) candle to sweep that level and fail. This allows you to spot liquidity sweeps and potential reversals at significant, structural price points. How It Works The indicator's logic is based on a simple, two-timeframe process: Level Detection: First, it finds the high and low of the previous bar on your chosen "Level Timeframe" (e.g., W for Weekly, D for Daily). It plots these as small 'x' markers on your chart. SFP Identification: Second, it watches price action on a lower "SFP Timeframe" (e.g., 240 for 4H). A potential SFP is identified when a candle's wick sweeps above a key high or below a key low. Confirmation: The SFP is only confirmed after the SFP candle closes back below the high (for a bearish SFP) or above the low (for a bullish SFP). It then waits for a set number of "Confirmation Bars" to pass. If price does not close back over the level during this window, the signal is locked in, and a label is printed. How to Use (Key Settings) Level Timeframe (Most Important): This is the timeframe for the levels you want to trade. Set this to W to find SFPs of the previous weekly high/low. Set it to D to find SFPs of the previous daily high/low. SFP Timeframe: This is the timeframe you want to use to find the SFP candle itself. This should be lower than your Level Timeframe (e.g., 240 or 60). Level Lookback: This controls how many old levels the script will track. A value of 10 on a W Level Timeframe will track the highs and lows of the last 10 weeks. Confirmation Bars: This is your "patience" filter. It's the number of SFP Timeframe bars that must close without reclaiming the level after the SFP. A value of 0 will confirm the SFP immediately on the candle's close. Enable Wick % Filter: A quality filter. If checked, this ensures the SFP candle's rejection wick is a significant percentage of the candle's total range. Chart Visuals 'x' Markers: These are the historical highs and lows from your "Level Timeframe". You can turn these on or off in the settings. SFP Label: When an SFP is fully confirmed, a label (Bearish SFP or Bullish SFP) will appear, detailing the level that was swept and the timeframes used. SFP Line: A solid horizontal line is drawn from the 'x' marker to the SFP candle to highlight the sweep. Colored Boxes (Optional): If you are viewing a chart timeframe lower than your "SFP Timeframe", you can enable background boxes to highlight the exact SFP candle and its confirmation bars.
Pine Script® Indikator
von nickbonenkamp
Session Moving AveragesAdds EMAs and SMAs to chart using 8am-8pm EST values. Completely configurable in settings. Some platforms allow users to configure what time frame they would like to view market data. One popular selection is 8am-8pm EST as 8am is when institutional orders go through. An argument can be made that price action before 8am EST is not valid yet moving averages will use that data. This matters less for shorter moving averages such as a 9 or 20 ema, but it dramatically changes the 200 or the 50 sma for example. This script allows you to ignore that pre-market data (or any data you choose to configure in the settings) and select up to 3 moving averages (either Exponential or Simple) for a set time. By default the moving averages include the 9-ema (gray), 20-ema (green), and 200-sma (purple) and is set to 8am-8pm EST This is configurable in the settings including the time frame you would like the moving averages to start using market data. By default the script will use your charts timeframe. You are able to use multi-time frames with this script just scroll down to "timeframe", then click "chart" in settings... this will then allow you to select a timeframe. A popular choice is 5-minute value of 8am-8pm EST moving averages. This means regardless of the time frame you are on (sub 1-minute, 1-minute, etc.) the script will display 5-minute data. Final note: In settings you are able to turn on/off shapes (the gray lines at the bottom) which shows when the data is being used. This can be helpful on certain tickers that trade continuously such as /ES or /NQ.
Pine Script® Indikator
von Scott_II
4
Session Time RangesHave you ever wondered if you are trading at the right time of the day or feel like all the good trades happen when you are sleeping? Well now you can check your theory :) This Script allows you to highlight a time range on your chart over a 24hour time period. For example 3AM to 6AM The script has two time variables, set your start time and end time based on a 24 hour clock and set the time zone offset variable to match your charts time zone. For example New York -4 (for utc just enter 0 for no offset ) This is a quick script I put together so hopefully it is error free enjoy :)
Pine Script® Indikator
von melodicfish
Liquidity Sweep + BOS Retest System — Prop Firm Edition🟦 Liquidity Sweep + BOS Retest System — Prop Firm Edition A High-Probability Smart Money Strategy Built for NQ, ES, and Funding Accounts 🚀 Overview The Liquidity Sweep + BOS Retest System (Prop Firm Edition) is a precision-engineered SMC strategy built specifically for prop firm traders. It mirrors institutional liquidity behavior and combines it with strict account-safe entry rules to help traders pass and maintain funding accounts with consistency. Unlike typical indicators, this system waits for three confirmations — liquidity sweep, displacement, and a clean retest — before executing any trade. Every component is optimized for low drawdown, high R:R, and prop-firm-approved risk management. Whether you’re trading Apex, TakeProfitTrader, FFF, or OneUp Trader, this system gives you a powerful mechanical framework that keeps you within rules while identifying the market’s highest-probability reversal zones. 🔥 Key Features 1. Liquidity Sweep Detection (Stop Hunt Logic) Automatically identifies when price clears a previous swing high/low with a sweep confirmation candle. ✔ Filters noise ✔ Eliminates early entries ✔ Locks onto true liquidity grabs 2. Automatic Break of Structure (BOS) Confirmation Price must show true displacement by breaking structure opposite the sweep direction. ✔ Confirms momentum shift ✔ Removes fake reversals ✔ Ensures institutional intent 3. Precision Retest Entry Model The strategy enters only when price retests the BOS level at premium/discount pricing. ✔ Zero chasing ✔ Extremely tight stop loss placement ✔ Prop-firm-friendly controlled risk 4. Built-In Risk & Trade Management SL set at swept liquidity TP set by user-defined R:R multiplier Optional session filter (NY Open by default) One trade at a time (no pyramiding) Automatically resets logic after each trade This prevents overtrading — the #1 cause of evaluation and account breaches. 5. Designed for Prop Firm Futures Trading This script is optimized for: Trailing/static drawdown accounts Micro contract precision Funding evaluations Low-risk, high-probability setups Structured, rule-based execution It reduces randomness and emotional trading by automating the highest-quality SMC sequence. 🎯 The Trading Model Behind the System Step 1 — Liquidity Sweep Price must take out a recent high/low and close back inside structure. This confirms stop-hunting behavior and marks the beginning of a potential reversal. Step 2 — BOS (Break of Structure) Price must break the opposite side swing with a displacement candle. This validates a directional shift. Step 3 — Retest Entry The system waits for price to retrace into the BOS level and signal continuation. This creates optimal R:R entry with minimal drawdown. 📈 Best Markets NQ (NASDAQ Futures) – Highly recommended ES, YM, RTY Gold (XAUUSD) FX majors Crypto (with high volatility) Works best on 1m, 2m, 5m, or 15m depending on your trading style. 🧠 Why Traders Love This System ✔ No signals until all confirmations align ✔ Reduces overtrading and emotional decisions ✔ Follows market structure instead of random indicators ✔ Perfect for maintaining long-term funded accounts ✔ Built around institutional-grade concepts ✔ Makes your trading consistent, calm, and rules-based ⚙️ Recommended Settings Session: 06:30–08:00 MST (NY Open) R:R: 1.5R – 3R Contracts: Start with 1–2 micros Markets: NQ for best structure & volume 📦 What’s Included Complete strategy logic All plots, labels, sweep markers & BOS alerts BOS retest entry automation Session filtering Stop loss & take profit system Full SMC logic pipeline 🏁 Summary The Liquidity Sweep + BOS Retest System is a complete, prop-firm-ready, structure-based strategy that automates one of the cleanest and most reliable SMC entry models. It is designed to keep you safe, consistent, and rule-compliant while capturing premium institutional setups. If you want to trade with confidence, discipline, and prop-firm precision — this system is for you. Good Luck -BG
Pine Script® Strategie
von christopher33g
Crude Oil Time + Fix Catalyst StrategyHybrid Workflow: Event-Driven Macro + Market DNA Micro 1. Macro Catalyst Layer (Your Overlays) Event Mapping: Fed decisions, LBMA fixes, EIA releases, OPEC+ meetings. Regime Filters: Risk-on/off, volatility regimes, macro bias (hawkish/dovish). Volatility Scaling: ATR-based position sizing, adaptive overlays for London/NY sessions. Governance: Max trades/day, cool-down logic, session boundaries. 👉 This layer answers when and why to engage. 2. Micro Execution Layer (Market DNA) Order Flow Confirmation: Tape reading (Level II, time & sales, bid/ask). Liquidity Zones: Identify support/resistance pools where buyers/sellers cluster. Imbalance Detection: Aggressive buyers/sellers overwhelming the other side. Precision Entry: Only trigger trades when order flow confirms macro catalyst bias. Risk Discipline: Tight stops beyond liquidity zones, conviction-based scaling. 👉 This layer answers how and where to engage. 3. Unified Playbook Step Macro Overlay (Your Edge) Market DNA (Jay’s Edge) Result Event Trigger Fed/LBMA/OPEC+ catalyst flagged — Volatility window opens Bias Filter Hawkish/dovish regime filter — Directional bias set Sizing ATR volatility scaling — Position size calibrated Execution — Tape confirms liquidity imbalance Precision entry Risk Control Governance rules (cool-down, max trades) Tight stops beyond liquidity zones Disciplined exits 4. Gold & Silver Use Case Gold (Fed Day): Overlay flags volatility window → bias hawkish. Market DNA shows sellers hitting bids at resistance. Enter short with volatility-scaled size, stop just above liquidity zone. Silver (LBMA Fix): Overlay highlights fix window → bias neutral. Market DNA shows buyers stepping in at support. Enter long with adaptive size, HUD displays risk metrics. 5. HUD Integration Macro Dashboard: Catalyst timeline, regime filter status, volatility bands. Micro Dashboard: Live tape imbalance meter, liquidity zone map, conviction score. Unified View: Macro tells you when to look, micro tells you when to pull the trigger. ⚡ This hybrid workflow gives you macro awareness + micro precision. Your overlays act as the radar, Jay’s Market DNA acts as the laser scope. Together, they create a disciplined, event-aware, volatility-scaled playbook for gold and silver. Antonio — do you want me to draft this into a compile-safe Pine Script v6 template that embeds the macro overlay logic, while leaving hooks for Market DNA-style execution (order flow confirmation)? That way you’d have a production-ready skeleton to extend across TradingView, TradeStation, and NinjaTrader. Antonio — do you want me to draft this into a compile-safe Pine Script v6 template that embeds the macro overlay logic, while leaving hooks for Market DNA-style execution (order flow confirmation)? That way you’d have a production-ready skeleton to extend across TradingView, TradeStation, and NinjaTrader.
Pine Script® Strategie
von bettencourt_antonio37
KSL Academy Indicator🔥 KuyTrade Gold Scalping Pro v2 - ครบทุกอาวุธในตัวเดียว! ⚡ 📊 Indicator สำหรับเทรด Gold M30 ที่รวมเอา 7 กลยุทธ์เข้าด้วยกัน ✅ EMA Trend Filter ✅ RSI + Stochastic (Momentum) ✅ ATR Volatility Filter ✅ Support/Resistance ✅ Price Action Patterns ✅ RSI Divergence ✅ Session Time Filter (London/NY/Asia)💰 ระบบ TP/SL แบบ Pro: TP 3 ระดับ Trailing Stop อัตโนมัติ คำนวณ Risk:Reward Ratio แยกตั้งค่า BUY/SELL ได้ 🎯 ข้อดี ✔ ครบจบในตัวเดียว - ไม่ต้องใช้ Indicator หลายตัว ✔ สัญญาณชัดเจน - มี Label บอกรายละเอียดเต็ม ✔ กรองคุณภาพสูง - Strict Filter Mode ✔ เหมาะกับ Scalping - TP/SL ระยะสั้น⚠️ ข้อควรระวัง: 💡 เหมาะกับใครบ้าง? 👉 Scalper ที่ชอบเทรด Gold M30 👉 คนที่ชอบสัญญาณครบถ้วน 👉 มือใหม่ที่ต้องการ Indicator All-in-One⚙️ Timeframe แนะนำ: M30 (30 นาที) 💵 สินทรัพย์: XAUUSD (Gold) 🕐 ช่วงเวลา: London + NY Session + Sydney + Tokyo
Pine Script® Indikator
von KuytradeTH
XAUMO LiquiZone — Absorption & Rejection (MTF, VSA)XAUMO LiquiZone — Absorption & Rejection (MTF, VSA) Free & open-source (MPL-2.0). Educational use only. WHAT IT DOES LiquiZone detects liquidity absorption & distribution zones using wick/volume anatomy and simple pivot structure, then plots them for both Higher Time Frame (HTF) and Lower Time Frame (LTF). An optional HTF Extension Engine projects selected historical HTF zones to the right (nearest or N zones above/below the current price) so you can track “institutional memory” into the live session. HOW IT WORKS (LOGIC) • Absorption rules (VSA-style): long wick on one side, volume > SMA(volume) × multiplier, and a small/controlled body vs full range. • Structure: zones are anchored on local pivot highs/lows (left/right bars). • HTF vs LTF: HTF signals are computed via request.security() on the timeframe you choose; LTF uses the chart timeframe. • Extension Engine: choose Bullish / Bearish / Both, Nearest Only or By Up/Down Count, custom colors, with safe forward limits to respect Pine’s x-distance constraints. RECOMMENDED SETUP (BEST FOR XAUUSD 15m TF) • Chart timeframe: 15m • HTF timeframe: 30m • Volume MA length: 20 • Min wick % of range: 0.30 • Volume over MA ×: 1.5 • Pivot Left/Right: 2 / 2 • Zone look-ahead bars: 500 • HTF Extension: Enabled – Extension length: 500 bars – Selection mode: By Up/Down Count – Zones Above (Up): 1 – Zones Below (Down): 2 – Extension color(s): purple tint (opacity ~80) for both bull/bear • Style: separate colors/opacity for HTF/LTF bull & bear zones (fully user-configurable) INPUTS (KEY SETTINGS) • HTF timeframe (default 30m), Volume MA length, Wick % threshold, Volume multiplier, Pivot L/R, Zone look-ahead bars (default 500). • Zone Style: independent colors & opacities for HTF/LTF bull & bear zones. • HTF Extension: enable toggle, extension length, side filter, selection mode, counts up/down, and custom colors for extended HTF zones. NOTES / BEST PRACTICE • Use HTF zones for context and LTF zones for execution. • Combine with volume profile (POC/VAL/VAH), VWAP, delta/tape tools for confirmation. • Uses pivots (confirmed after Pivot Right bars); this is a visualization/education tool, not a signal generator. LICENSE & DISCLAIMER • License: Mozilla Public License 2.0 (MPL-2.0). • Educational purpose only. No financial advice. You are fully responsible for your own trading decisions. FRAUD / SCAM WARNING • This script is free and open-source. No one is authorized to sell it, rent it, or ask you for money, DMs, or “account management.” • If someone impersonates the author or offers paid access, treat it as fraud/scam and report via TradingView. CHANGELOG v1.0 • Initial public release: HTF/LTF absorption zones + HTF Extension Engine + full styling controls.
Pine Script® Indikator
von ICHIMOKUontheNILE
1
Market Breadth Decision HelperMarket Breadth Decision Helper (NYSE/NASDAQ VOLD, ADD, TICK) Combines NYSE VOLD, NASDAQ VOLD (VOLDQ), NYSE/NASDAQ ADD, and TICK into a single intraday dashboard for tactical bias and risk management. Tiered pressure scale (sign shows direction, abs(tier) shows intensity): 0 = Neutral, 1 = Mild, 2 = Strong, 3 = Severe, 4 = Panic. On-chart legend makes this explicit. Table view highlights value, tier, bull/bear point contributions, and notes (PANIC, OVERRIDE, DIVERGENCE). VOLD and ADD panic trigger “stand down”; VOLD ±2 triggers bull/bear overrides; NYSE vs NASDAQ ADD divergence triggers “scalp only.” Bull/bear points: VOLD 2 pts, ADD NYSE 2 pts, ADD NASDAQ 1 pt, TICK 1 pt. ≥3 pts on a side lifts that side’s multiplier to 1.5. Bias flips Bullish/Bearish only if a side leads and has ≥2 pts; otherwise Neutral. Breadth modes: PANIC_NO_TRADE → DIVERGENCE_SCALP_ONLY → VOLD_OVERRIDE_BULL/BEAR → NORMAL/NO_EDGE. Intraday context: tracks current session day_high / day_low for the chart symbol. JSON/Alert export (optional) sends raw values plus *_tier and *_tier_desc labels (NEUTRAL/MILD/STRONG/SEVERE/PANIC) with sign/magnitude hints, so agents/bots never have to guess what “1 vs 2 vs 3 vs 4” mean. Customizable bands for VOLD/ADD/TICK, table styling, label placement, and dashboard bias input to align with higher-timeframe context. Best use Quick read on internal participation and pressure magnitude. Guardrails: respect PANIC and overrides; treat divergence as “scalp only.” Pair with your strategy entries; let breadth govern when to press, scale back, or stand down. Symbols (defaults) VOLD (NYSE volume diff), VOLDQ (NASDAQ volume diff), ADD (NYSE), ADDQ (NASDAQ), TICK (NYSE). Adjust in Inputs as needed. Alerts Panic, divergence, strong bullish/bearish breadth. Enable JSON export to feed algo/agent workflows.
Pine Script® Indikator
von SaltyCod
AMDX/XAMD indicatorThe AMDX/XAMD indicator is designed to highlight specific trading sessions on the chart using distinct colors and optional vertical lines. Users can choose between two session types, AMDX or XAMD, and customize the visual appearance of the sessions. This tool is particularly useful for traders who want to analyze market behavior during different trading periods. Meaning of AMDX: A: Accumulation M: Manipulation D: Distribution X: Continuation Or Reversal Features: Session Highlighting: AMDX Sessions: Split into four segments - A, M, D, X. XAMD Sessions: Split into four segments - X, A, M, D. Customizable Colors: Choose individual colors for each session (A, M, D, X). Adjust the transparency of the session boxes for better visual integration with the chart. Drawing Styles: Box Style: Draws colored boxes around the session ranges. Line Style: Draws vertical lines at session start and end times. Vertical Lines: Option to enable or disable vertical lines at session boundaries. Customizable line style: Solid, Dotted, or Dashed. Session Labels: Automatically labels each session for easy identification. Customization Options: Session Type: Select between AMDX and XAMD session types. Colors: Set custom colors for each session and vertical lines. Border Width: Adjust the width of the session box borders. Transparency: Control the transparency level of the session boxes. Drawing Style: Choose between Box and Line styles for session representation. Vertical Lines: Enable or disable vertical lines and select the line style. How It Works: The indicator calculates the start and end times for each session based on the selected session type (AMDX or XAMD). It then draws either boxes or lines to highlight these sessions on the chart. The indicator also includes options to draw vertical lines at the session boundaries and labels each session with a corresponding letter (A, M, D, X). Use Cases: Market Session Analysis: Easily identify and analyze market behavior during different trading sessions. Intraday Trading: Helps intraday traders to focus on specific time segments of the trading day. Visual Segmentation: Provides a clear visual segmentation of the trading day, aiding in better decision-making. Times for AMDX/XAMD session: A Session: 18:00 (previous day) to 03:00 (current day) M Session: 03:00 to 09:00 D Session: 09:00 to 12:00 X Session: 12:00 to 18:00 Time for the XAMD session : X Session: 18:00 (previous day) to 00:00 (current day) A Session: 00:00 to 09:00 M Session: 09:00 to 12:00 D Session: 12:00 to 18:00
Pine Script® Indikator
von Noxthinmarket
3
Time Zone PSenseiTitle: Time Zone PS Indicator Author: Orlando Depablos Description: The Time Zone PS Indicator is a tool designed to help traders visualize different trading sessions on their charts. It allows users to specify three different trading sessions: the start of the day, the London session, and the New York (NYC) session. Each session is represented by a distinct color-coded background on the chart. Features: Customizable Sessions: Traders can define the start time and end time for each trading session according to their preference. This flexibility enables users to tailor the indicator to their specific trading strategies session time zones. Session Display Control: Users have the option to choose whether they want to display each trading session on the chart. This feature allows for a clutter-free charting experience, where traders can focus on the sessions relevant to their analysis. Visual Clarity: The indicator uses distinct colors for each trading session, making it easy for traders to differentiate between different time zones. This visual clarity aids in quickly identifying key trading periods throughout the day. How to Use: Setting Up Sessions: Use the input options to define the start and end times for the start of the day, the London session, and the NYC session. Adjust these values based on your trading preferences and time zone. Display Preferences: Toggle the display options to choose which trading sessions you want to visualize on the chart. This allows for a customizable charting experience tailored to your specific needs. Interpreting the Chart: Once configured, the indicator will display color-coded backgrounds on the chart corresponding to the defined trading sessions. Interpret these visual cues to identify key trading periods and plan your trading strategies accordingly. Originality: The Time Zone PS Indicator adds value to the TradingView community by providing traders with a customizable tool to visualize different trading sessions. While similar indicators exist, this script offers flexibility and ease of use, enhancing the charting experience for traders across various time zones. Use Cases: Session-Based Analysis: Traders can use the indicator to analyze price action within specific trading sessions, such as the London or NYC session, to identify potential trading opportunities. Time Zone Adjustment: Traders operating in different time zones can adjust the indicator settings to align with their local trading hours, ensuring accurate visualization of relevant trading sessions. Strategy Development: The indicator can aid in the development of trading strategies that capitalize on price movements during specific trading sessions, helping traders optimize their trading performance. Chart Visualization: The indicator provides a clear and concise visualization of different trading sessions on the chart. Each session is represented by a color-coded background, allowing traders to quickly identify key trading periods and make informed trading decisions.
Pine Script® Indikator
von mc_bosc
2
Volume Profile [Makit0]VOLUME PROFILE INDICATOR v0.5 beta Volume Profile is suitable for day and swing trading on stock and futures markets, is a volume based indicator that gives you 6 key values for each session: POC, VAH, VAL, profile HIGH, LOW and MID levels. This project was born on the idea of plotting the RTH sessions Value Areas for /ES in an automated way, but you can select between 3 different sessions: RTH, GLOBEX and FULL sessions. Some basic concepts: - Volume Profile calculates the total volume for the session at each price level and give us market generated information about what price and range of prices are the most traded (where the value is) - Value Area (VA): range of prices where 70% of the session volume is traded - Value Area High (VAH): highest price within VA - Value Area Low (VAL): lowest price within VA - Point of Control (POC): the most traded price of the session (with the most volume) - Session HIGH, LOW and MID levels are also important There are a huge amount of things to know of Market Profile and Auction Theory like types of days, types of openings, relationships between value areas and openings... for those interested Jim Dalton's work is the way to come I'm in my 2nd trading year and my goal for this year is learning to daytrade the futures markets thru the lens of Market Profile For info on Volume Profile: TV Volume Profile wiki page at www.tradingview.com For info on Market Profile and Market Auction Theory: Jim Dalton's book Mind over markets (this is a MUST) BE AWARE: this indicator is based on the current chart's time interval and it only plots on 1, 2, 3, 5, 10, 15 and 30 minutes charts. This is the correlation table TV uses in the Volume Profile Session Volume indicator (from the wiki above) Chart Indicator 1 - 5 1 6 - 15 5 16 - 30 10 31 - 60 15 61 - 120 30 121 - 1D 60 This indicator doesn't follow that correlation, it doesn't get the volume data from a lower timeframe, it gets the data from the current chart resolution. FEATURES - 6 key values for each session: POC (solid yellow), VAH (solid red), VAL (solid green), profile HIGH (dashed silver), LOW (dashed silver) and MID (dotted silver) levels - 3 sessions to choose for: RTH, GLOBEX and FULL - select the numbers of sessions to plot by adding 12 hours periods back in time - show/hide POC - show/hide VAH & VAL - show/hide session HIGH, LOW & MID levels - highlight the periods of time out of the session (silver) - extend the plotted lines all the way to the right, be careful this can turn the chart unreadable if there are a lot of sessions and lines plotted SETTINGS - Session: select between RTH (8:30 to 15:15 CT), GLOBEX (17:00 to 8:30 CT) and FULL (17:00 to 15:15 CT) sessions. RTH by default - Last 12 hour periods to show: select the deph of the study by adding periods, for example, 60 periods are 30 natural days and around 22 trading days. 1 period by default - Show POC (Point of Control): show/hide POC line. true by default - Show VA (Value Area High & Low): show/hide VAH & VAL lines. true by default - Show Range (Session High, Low & Mid): show/hide session HIGH, LOW & MID lines. true by default - Highlight out of session: show/hide a silver shadow over the non session periods. true by default - Extension: Extend all the plotted lines to the right. false by default HOW TO SETUP BE AWARE THIS INDICATOR PLOTS ONLY IN THE FOLLOWING CHART RESOLUTIONS: 1, 2, 3, 5, 10, 15 AND 30 MINUTES CHARTS. YOU MUST SELECT ONE OF THIS RESOLUTIONS TO THE INDICATOR BE ABLE TO PLOT - By default this indicator plots all the levels for the last RTH session within the last 12 hours, if there is no plot try to adjust the 12 hours periods until the seesion and the periods match - For Globex/Full sessions just select what you want from the dropdown menu and adjust the periods to plot the values - Show or hide the levels you want with the 3 groups: POC line, VA lines and Session Range lines - The highlight and extension options are for a better visibility of the levels as POC or VAH/VAL THANKS TO @watsonexchange for all the help, ideas and insights on this and the last two indicators (Market Delta & Market Internals) I'm working on my way to a 'clean chart' but for me it's not an easy path @PineCoders for all the amazing stuff they do and all the help and tools they provide, in special the Script-Stopwatch at that was key in lowering this indicator's execution time All the TV and Pine community, open source and shared knowledge are indeed the best way to help each other IF YOU REALLY LIKE THIS WORK, please send me a comment or a private message and TELL ME WHAT you trade, HOW you trade it and your FAVOURITE SETUP for pulling out money from the market in a consistent basis, I'm learning to trade (this is my 2nd year) and I need all the help I can get GOOD LUCK AND HAPPY TRADING
Pine Script® Indikator
von makit0
65
ICT Opening Range Projections (tristanlee85)ICT Opening Range Projections This indicator visualizes key price levels based on ICT's (Inner Circle Trader) "Opening Range" concept. This 30-minute time interval establishes price levels that the algorithm will refer to throughout the session. The indicator displays these levels, including standard deviation projections, internal subdivisions (quadrants), and the opening price. 🟪 What It Does The Opening Range is a crucial 30-minute window where market algorithms establish significant price levels. ICT theory suggests this range forms the basis for daily price movement. This script helps you: Mark the high, low, and opening price of each session. Divide the range into quadrants (premium, discount, and midpoint/Consequent Encroachment). Project potential price targets beyond the range using configurable standard deviation multiples . 🟪 How to Use It This tool aids in time-based technical analysis rooted in ICT's Opening Range model, helping you observe price interaction with algorithmic levels. Example uses include: Identifying early structural boundaries. Observing price behavior within premium/discount zones. Visualizing initial displacement from the range to anticipate future moves. Comparing price reactions at projected standard deviation levels. Aligning price action with significant times like London or NY Open. Note: This indicator provides a visual framework; it does not offer trade signals or interpretations. 🟪 Key Information Time Zone: New York time (ET) is required on your chart. Sessions: Supports multiple sessions, including NY midnight, NY AM, NY PM, and three custom timeframes. Time Interval: Supports multi-timeframe up to 15 minutes. Best used on a 1-minute chart for accuracy. 🟪 Session Options The Opening Range interval is configurable for up to 6 sessions: Pre-defined ICT Sessions: NY Midnight: 12:00 AM – 12:30 AM ET NY AM: 9:30 AM – 10:00 AM ET NY PM: 1:30 PM – 2:00 PM ET Custom Sessions: Three user-defined start/end time pairs. This example shows a custom session from 03:30 - 04:00: 🟪 Understanding the Levels The Opening Price is the open of the first 1-minute candle within the chosen session. At session close, the Opening Range is calculated using its High and Low . An optional swing-based mode uses swing highs/lows for range boundaries. The range is divided into quadrants by its midpoint ( Consequent Encroachment or CE): Upper Quadrant: CE to high (premium). Lower Quadrant: Low to CE (discount). These subdivisions help visualize internal range dynamics, where price often reacts during algorithmic delivery. 🟪 Working with Ranges By default, the range is determined by the highest high and lowest low of the 30-minute session: A range can also be determined by the highest/lowest swing points: Quadrants outline the premium and discount of a range that price will reference: Small ranges still follow the same algorithmic logic, but may be deemed insignificant for one's trading. These can be filtered in the settings by specifying a minimum ticks limit. In this example, the range is 42 ticks (10.5 points) but the indicator is configured for 80 ticks (20 points). We can select which levels will plot if the range is below the limit. Here, only the 00:00 opening price is plotted: You may opt to include the range high/low, quadrants, and projections as well. This will plot a red (configurable) range bracket to indicate it is below the limit while plotting the levels: 🟪 Price Projections Projections extend beyond the Opening Range using standard deviations, framing the market beyond the initial session and identifying potential targets. You define the standard deviation multiples (e.g., 1.0, 1.5, 2.0). Both positive and negative extensions are displayed, symmetrically projected from the range's high and low. The Dynamic Levels option plots only the next projection level once price crosses the previous extreme. For example, only the 0.5 STDEV level plots until price reaches it, then the 1.0 level appears, and so on. This continues up to your defined maximum projections, or indefinitely if standard deviations are set to 0. This example shows dynamic levels for a total of 6 sessions, only 1 of which meet a configured minimum limit of 50 ticks: Small ranges followed by significant displacement are impacted the most with the number of levels plotted. You may hide projections when configuring the minimum ticks. A fixed standard deviation will plot levels in both directions, regardless of the price range. Here, we plot up to 3.0 which hiding projections for small ranges: 🟪 Legal Disclaimer This indicator is provided for informational and educational purposes only. It is not financial advice, and should not be construed as a recommendation to buy or sell any financial instrument. Trading involves substantial risk, and you could lose a significant amount of money. Past performance is not indicative of future results. Always consult with a qualified financial professional before making any trading or investment decisions. The creators and distributors of this indicator assume no responsibility for your trading outcomes.
Pine Script® Indikator
von tristanlee85
10
Custom V2 KillZone US / FVG / EMAThis indicator is designed for traders looking to analyze liquidity levels, opportunity zones, and the underlying trend across different trading sessions. Inspired by the ICT methodology, this tool combines analysis of Exponential Moving Averages (EMA), session management, and Fair Value Gap (FVG) detection to provide a structured and disciplined approach to trading effectively. Indicator Features Identifying the Underlying Trend with Two EMAs The indicator uses two EMAs on different, customizable timeframes to define the underlying trend: EMA1 (default set to a daily timeframe): Represents the primary underlying trend. EMA2 (default set to a 4-hour timeframe): Helps identify secondary corrections or impulses within the main trend. These two EMAs allow traders to stay aligned with the market trend by prioritizing trades in the direction of the moving averages. For example, if prices are above both EMAs, the trend is bullish, and long trades are favored. Analysis of Market Sessions The indicator divides the day into key trading sessions: Asian Session London Session US Pre-Open Session Liquidity Kill Session US Kill Zone Session Each session is represented by high and low zones as well as mid-lines, allowing traders to visualize liquidity levels reached during these periods. Tracking the price levels in different sessions helps determine whether liquidity levels have been "swept" (taken) or not, which is essential for ICT methodology. Liquidity Signal ("OK" or "STOP") A specific signal appears at the end of the "Liquidity Kill" session (just before the "US Kill Zone" session): "OK" Signal: Indicates that liquidity conditions are favorable for trading the "US Kill Zone" session. This means that liquidity levels have been swept in previous sessions (Asian, London, US Pre-Open), and the market is ready for an opportunity. "STOP" Signal: Indicates that it is not favorable to trade the "US Kill Zone" session, as certain liquidity conditions have not been met. The "OK" or "STOP" signal is based on an analysis of the high and low levels from previous sessions, allowing traders to ensure that significant liquidity zones have been reached before considering positions in the "Kill Zone". Detection of Fair Value Gaps (FVG) in the US Kill Zone Session When an "OK" signal is displayed, the indicator identifies Fair Value Gaps (FVG) during the "US Kill Zone" session. These FVGs are areas where price may return to fill an "imbalance" in the market, making them potential entry points. Bullish FVG: Detected when there is a bullish imbalance, providing a buying opportunity if conditions align with the underlying trend. Bearish FVG: Detected when there is a bearish imbalance, providing a selling opportunity in the trend direction. FVG detection aligns with the ICT Silver Bullet methodology, where these imbalance zones serve as probable entry points during the "US Kill Zone". How to Use This Indicator Check the Underlying Trend Before trading, observe the two EMAs (daily and 4-hour) to understand the general market trend. Trades will be prioritized in the direction indicated by these EMAs. Monitor Liquidity Signals After the Asian, London, and US Pre-Open Sessions The high and low levels of each session help determine if liquidity has already been swept in these areas. At the end of the "Liquidity Kill" session, an "OK" or "STOP" label will appear: "OK" means you can look for trading opportunities in the "US Kill Zone" session. "STOP" means it is preferable not to take trades in the "US Kill Zone" session. Look for Opportunities in the US Kill Zone if the Signal is "OK" When the "OK" label is present, focus on the "US Kill Zone" session. Use the Fair Value Gaps (FVG) as potential entry points for trades based on the ICT methodology. The identified FVGs will appear as colored boxes (bullish or bearish) during this session. Use ICT Methodology to Manage Your Trades Follow the FVGs as potential reversal zones in the direction of the trend, and manage your positions according to your personal strategy and the rules of the ICT Silver Bullet method. Customizable Settings The indicator includes several customization options to suit the trader's preferences: EMA: Length, source (close, open, etc.), and timeframe. Market Sessions: Ability to enable or disable each session, with color and line width settings. Liquidity Signals: Customization of colors for the "OK" and "STOP" labels. FVG: Option to display FVGs or not, with customizable colors for bullish and bearish FVGs, and the number of bars for FVG extension. ------------------------------------------------------------------------------------------------------------- Cet indicateur est conçu pour les traders souhaitant analyser les niveaux de liquidité, les zones d’opportunité, et la tendance de fond à travers différentes sessions de trading. Inspiré de la méthodologie ICT, cet outil combine l'analyse des moyennes mobiles exponentielles (EMA), la gestion des sessions de marché, et la détection des Fair Value Gaps (FVG), afin de fournir une approche structurée et disciplinée pour trader efficacement.
Pine Script® Indikator
von LauryGinal