Auf geht's

In den Scripts nach "macd背离选股" suchen

MACD + RSI + EMA + BB + ATR Day Trading StrategyEntry Conditions and Signals The strategy implements a multi-layered filtering approach to entry conditions, requiring alignment across technical indicators, timeframes, and market conditions . Long Entry Requirements Trend Filter: Fast EMA (9) must be above Slow EMA (21), price must be above Fast EMA, and higher timeframe must confirm uptrend MACD Signal: MACD line crosses above signal line, indicating increasing bullish momentum RSI Condition: RSI below 70 (not overbought) but above 40 (showing momentum) Volume & Volatility: Current volume exceeds 1.2x 20-period average and ATR shows sufficient market movement Time Filter: Trading occurs during optimal hours (9:30-11:30 AM ET) when market volatility is typically highest Exit Strategies The strategy employs multiple exit mechanisms to adapt to changing market conditions and protect profits : Stop Loss Management Initial Stop: Placed at 2.0x ATR from entry price, adapting to current market volatility Trailing Stop: 1.5x ATR trailing stop that moves up (for longs) or down (for shorts) as price moves favorably Time-Based Exits: All positions closed by end of trading day (4:00 PM ET) to avoid overnight risk Best Practices for Implementation Settings Chart Setup: 5-minute timeframe for execution with 15-minute chart for trend confirmation Session Times: Focus on 9:30-11:30 AM ET trading for highest volatility and opportunity
Pine Script® Strategie
von shui2967
Range Strat - MACD/RSIThis strategy uses a trend based indicator (MACD) for entry/exit signals with a momentum oscillator (RSI) to act as confirmation. Although relying on a trend based indicator this has been created for range bound crypto markets, which have been in a period of chop since June 2022. Long/Short signals are generated from MACD with the RSI oscillator thresholds suppressing entries at price extremes. This is not a mean reversion RSI strategy! As the indicators are contrary to each other you will need to be generous with the RSI settings in order for signals to trigger. Strategy is designed for use on the 4h timeframe, it may work well on higher timeframes, but lower time frames will lead to false signals. Use fixed percentage of equity for order size to capture the compounding effect. As a reversal strategy bear in mind that should market trend strongly in either direction stops will be required. The RSI thresholds can be tailored to provide higher frequency or safer signals. Similarly tweaking MACD settings will provide earlier/more frequent or safer signals. As this is intended to enter near range high / low you should check the visual cues to ensure a ping-pong effect is observed, so that peaks and troughs are captured. Once an observable range is established the strategy works well across a range of crypto markets, The script is open source, so feel free to amend as you wish. Using a different momentum oscillator may provide better results. I have prior coding experience, but first time using PineScript was last night, so it's not very tidy. I will update this with some additional customisation and TP/SL in the near future. Usage: Range bound markets Markets: Cryptocurrency Alts/BTC/ETH Timeframe: 4h
Pine Script® Strategie
von kuhoerk
8
Smoother Momentum MACD w/ DSL [Loxx]Smoother Momentum MACD w/ DSL uses two different EMA calculations to derive momentum and then calculates the MACD between those momentum outputs. This indicator uses a variation of Discontinued Signal Lines for the breakout/breakdown/reversal signals . There are three different signal types: middle, levels, and slope. I've also added alerts and signals. The discontinued signal lines can be smoothed using EMA or Fast EMA. What are DSL Discontinued Signal Line? A lot of indicators are using signal lines in order to determine the trend (or some desired state of the indicator) easier. The idea of the signal line is easy : comparing the value to it's smoothed (slightly lagging) state, the idea of current momentum/state is made. Discontinued signal line is inheriting that simple signal line idea and it is extending it : instead of having one signal line, more lines depending on the current value of the indicator. "Signal" line is calculated the following way : When a certain level is crossed into the desired direction, the EMA of that value is calculated for the desired signal line When that level is crossed into the opposite direction, the previous "signal" line value is simply "inherited" and it becomes a kind of a level This way it becomes a combination of signal lines and levels that are trying to combine both the good from both methods. In simple terms, DSL uses the concept of a signal line and betters it by inheriting the previous signal line's value & makes it a level. Included: Loxx's Expanded Source Types Alerts Signals Bar coloring Other momentum indicators CFB-Adaptive Velocity Histogram Variety-Filtered, Squeeze Moving Averages William Blau Ergodic Tick Volume Indicator (TVI)
Pine Script® Indikator
von loxx
Hodrick-Prescott MACD [Loxx]Hodrick-Prescott MACD is a MACD indicator using a Hodrick-Prescott Filter. What is Hodrick–Prescott filter? The Hodrick–Prescott filter (also known as Hodrick–Prescott decomposition) is a mathematical tool used in macroeconomics, especially in real business cycle theory, to remove the cyclical component of a time series from raw data. It is used to obtain a smoothed-curve representation of a time series, one that is more sensitive to long-term than to short-term fluctuations. The adjustment of the sensitivity of the trend to short-term fluctuations is achieved by modifying a multiplier Lambda. The filter was popularized in the field of economics in the 1990s by economists Robert J. Hodrick and Nobel Memorial Prize winner Edward C. Prescott, though it was first proposed much earlier by E. T. Whittaker in 1923. There are some drawbacks to use the HP filter than you can read here: en.wikipedia.org Included Bar coloring 3 types of signals Alerts Loxx's Expanded Source Types
Pine Script® Indikator
von loxx
Digital Kahler MACD [Loxx]Digital Kahler MACD is a MACD indicator that uses an extreme noise reduction algorithm by Philipp Kahler. For our purposes here, we call it Digital Kahler. What is Digital Kahler? From Philipp Kahler's article for www.traders-mag.com, August 2008. "A Classic Indicator in a New Suit: Digital Stochastic" Digital Indicators Whenever you study the development of trading systems in particular, you will be struck in an extremely unpleasant way by the seemingly unmotivated indentations and changes in direction of each indicator. An experienced trader can recognise many false signals of the indicator on the basis of his solid background; a stupid trading system usually falls into any trap offered by the unclear indicator course. This is what motivated me to improve even further this and other indicators with the help of a relatively simple procedure. The goal of this development is to be able to use this indicator in a trading system with as few additional conditions as possible. Discretionary traders will likewise be happy about this clear course, which is not nerve-racking and makes concentrating on the essential elements of trading possible. How Is It Done? The digital stochastic is a child of the original indicator. We owe a debt of gratitude to George Lane for his idea to design an indicator which describes the position of the current price within the high-low range of the historical price movement. My contribution to this indicator is the changed pattern which improves the quality of the signal without generating too long delays in giving signals. The trick used to generate this “digital” behavior of the indicator. It can be used with most oscillators like RSI or CCI. First of all, the original is looked at. The indicator always moves between 0 and 100. The precise position of the indicator or its course relative to the trigger line are of no interest to me, I would just like to know whether the indicator is quoted below or above the value 50. This is tantamount to the question of whether the market is just trading above or below the middle of the high-low range of the past few days. If the market trades in the upper half of its high-low range, then the digital stochastic is given the value 1; if the original stochastic is below 50, then the value –1 is given. This leads to a sequence of 1/-1 values – the digital core of the new indicator. These values are subsequently smoothed by means of a short exponential moving average. This way minor false signals are eliminated and the indicator is given its typical form. Included: Bar coloring Signals Alerts Loxx's Expanded Source Types Loxx's Moving Averages
Pine Script® Indikator
von loxx
Inverse MACD + DMI Scalping with Volatility Stop (By Coinrule)This script is focused on shorting during downtrends and utilises two strength based indicators to provide confluence that the start of a short-term downtrend has occurred - catching the opportunity as soon as possible. This script can work well on coins you are planning to hodl for long-term and works especially well whilst using an automated bot that can execute your trades for you. It allows you to hedge your investment by allocating a % of your coins to trade with, whilst not risking your entire holding. This mitigates unrealised losses from hodling as it provides additional cash from the profits made. You can then choose to hodl this cash, or use it to reinvest when the market reaches attractive buying levels. Alternatively, you can use this when trading contracts on futures markets where there is no need to already own the underlying asset prior to shorting it. ENTRY The trading system uses the Momentum Average Convergence Divergence (MACD) indicator and the Directional Movement Index (DMI) indicator to confirm when the best time is for selling. Combining these two indicators prevents trading during uptrends and reduces the likelihood of getting stuck in a market with low volatility. The MACD is a trend following momentum indicator and provides identification of short-term trend direction. In this variation it utilises the 12-period as the fast and 26-period as the slow length EMAs, with signal smoothing set at 9. The DMI indicates what way price is trending and compares prior lows and highs with two lines drawn between each - the positive directional movement line (+DI) and the negative directional movement line (-DI). The trend can be interpreted by comparing the two lines and what line is greater. When the negative DMI is greater than the positive DMI, there are more chances that the asset is trading in a sustained downtrend, and vice versa. The system will enter trades when two conditions are met: 1) The MACD histogram turns bearish. 2) When the negative DMI is greater than the positive DMI. EXIT The strategy comes with a fixed take profit combined with a volatility stop, which acts as a trailing stop to adapt to the trend's strength. Depending on your long-term confidence in the asset, you can edit the fixed take profit to be more conservative or aggressive. The position is closed when: Take-Profit Exit: +8% price decrease from entry price. OR Stop-Loss Exit: Price crosses above the volatility stop. In general, this approach suits medium to long term strategies. The backtesting for this strategy begins on 1 April 2022 to 18 July 2022 in order to demonstrate its results in a bear market. Back testing it further from the beginning of 2022 onwards further also produces good returns. Pairs that produce very strong results include SOLUSDT on the 45m timeframe, MATICUSDT on the 2h timeframe, and AVAUSDT on the 1h timeframe. Generally, the back testing suggests that it works best on the 45m/1h timeframe across most pairs. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance.
Pine Script® Strategie
von Coinrule
1
Sherry on Crypto - MACD ScalpingThis indicator is originally made by someone else, I just modified it to increase its win rate. How to use this indicator? Step 1: This indicator only works in 5 minutes timeframe (BTC) . Apply 5 minutes timeframe in Tradingview. Step 2: Apply 2 EMA(s), 1st EMA length 50, 2nd EMA length 200. Step 3: Draw support and resistance and understand price action as well. Step 4: Use RSI along with this indicator. Strategy: When you see a down tick on the MACD in 5 minutes timeframe, you are allow to take a long position. When you see an up tick on the MACD in 5 minutes timeframe, you are allow to take a Short position, but RSI should be Included (you can do your own settings of RSI). Recommended TP 0.50 and SL 0.40.
Pine Script® Indikator
von SherrySOC
1
Disclosure of 'MACD-Total' indicator (MACD-T)hello? Traders, welcome. If you "follow", you can always get new information quickly. Please also click "Like". Have a good day. ------------------------------------- A trend indicator has been added to the previously published MACD-Price indicator. The added MS-Signal indicator is an indicator for viewing the trend and the strength of the trend. Trading with a trend line is not easy. Therefore, various MA lines or slanted lines drawn on the chart are used to see the flow of the chart. Therefore, it is not recommended to trade with the added MS-Signal indicator as support and resistance points. A trade requires support and resistance points. To mark support and resistance points, you need a point or section on the horizontal line. Therefore, it is necessary to utilize the 'Buy/Sell' indicator corresponding to the previously disclosed MACD-Price indicator. (1W chart) The long horizontal point of the 'Buy/Sell' indicator serves as support and resistance. It is possible to check in which section the trend reversal has changed by displaying the MS-Signal indicator. (1D chart) A move has emerged to show a reversal of the trend by breaking above the MS-Signal indicator. Therefore, the MS-Signal indicator is about to change from a downtrend to an uptrend. I numbered the horizontal line of the 'Buy/Sell' indicator. The length is different in the order of No. 2 > No. 1 > No. 3. Since horizontal line 2 is the longest, it indicates that support and resistance play the greatest role. If you check the support at the first horizontal point, it can be interpreted that there is a high possibility of receiving resistance at the second horizontal point. However, if you find support at the 2nd horizontal point, you can see that it will go up significantly with 3rd position. Trading with indicators allows you to make quick choices and decisions. However, more important than the use of indicators is your own trading strategy. in other words, - How much investment will you proceed with the purchase? - How to proceed with installment purchases - At what point will the Stop Loss be done? - How long will the investment period be? - Is it a long-term investment or a short-term investment? As listed above, the most important trading strategy for trading should be established. When conducting a trade, ignoring the above list and thinking about where to buy and where to sell is like sailing in the dark. We disclose the indicators in the hope that it will become a faster and more objective indicator for trading with the trading strategy you have established. thank you ------------------------------------------------------------ -----------------------------------------------------
Pine Script® Indikator
von readCrypto
Market Sector Scanner/Screener With MOM + RSI + MFI + DMI + MACDMARKET SECTOR SCANNER/SCREENER MOM + RSI + MFI + DMI + MACD FOR STOCKS CRYPTO & FOREX This script scans 9 markets constantly and returns the values of 5 different popular indicators. This indicator helps you see when one of your favorite stocks is bullish or bearish when you are not watching that chart so you can always catch the big moves as they happen. ***HOW TO USE*** A great way to use this market screener is to set up separate chart layouts for each sector you like to trade. Such as the top 9 stocks in the S & P 500, top 9 stocks in the XLF etf, etc. Make sure to set up separate chart layouts in Tradingview so you don’t have to change the symbols constantly. This will give you a good idea in real time if that entire sector is bullish, bearish or mixed. When the entire grid goes red or green, those are very strong signs of market direction across that entire sector, so trades in the corresponding direction are quite safe. This can be done for crypto as well, using the top 9 cryptocurrencies by market cap. Watch the grid and wait for the entire lot to turn green or red and then take a position in that direction. You can also use this with a variety of your favorite tickers so you can see when specific markets are looking strong in either direction, instead of constantly changing charts or missing good opportunities because you weren’t watching that specific chart. This grid can also be used to determine how long to hold a position as well. If the entire grid is still green or red, according to your trade direction, you can usually expect price to continue in that direction until you see some conflicting colors start to pop up on the grid. As it starts to give mixed signals, you can expect the market to be indecisive or reverse which is a good time to get out. If you have your scanner setup to show similar markets in one sector, be careful taking trades when the grid is very mixed in color. This shows signs of indecision and will likely have choppy price action until the market decides a direction so make sure to use caution when the grid is mixed. It is best to wait for the entire grid to turn green or red and then take position. ***COLOR MEANINGS*** When each indicator value is in bullish territory, the background of that value will turn green. When each indicator value is in bearish territory, the background of that value will turn red. When each indicator value is in neutral territory, the background of that value will turn blue. When all 5 indicators for a ticker are bullish, the ticker background will turn green. When all 5 indicators for a ticker are bearish, the ticker background will turn red. When there is a mixture of bullish and bearish values, the ticker background will turn blue. ***CUSTOMIZATION*** You can customize which tickers are in your scanner including stocks, crypto, futures and forex, the source of the indicators, the length of the indicator settings and the smoothing parameters. ***INDICATORS USED*** The indicators used for each ticker are as follows: Momentum(MOM) - Default length is 14. Bullish is above zero, bearish is below zero. Relative Strength Index(RSI) - Default length is 14. Bullish is above 50, bearish is below 50. Money Flow Index(MFI) - Default length is 14. Bullish is above 50, bearish is below 50. Directional Movement Index(DMI) - Default length is 14 and smoothing is 14. Calculated by subtracting di minus from di plus. If the value is positive, it is bullish. If the value is negative, it is bearish. Moving Average Convergence & Divergence(MACD) - Default settings are 12, 26, 9. If the short line is greater than the long line, then it is bullish. If the short line is less than the long line, it is bearish. ***MARKETS*** This market scanner can be used as a signal on all markets, including stocks, crypto, futures and forex. ***TIMEFRAMES*** This scanner can be used on all timeframes and pulls data from other tickers using the same timeframe as what your current chart is set to. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are Trend Friend Scalp & Swing Signals, Auto Fibonacci, Directional Movement Index, Volume Profile With Buy/Sell Pressure, Auto Support And Resistance and Money Flow Index in combination with this Scanner. They all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
Pine Script® Indikator
von FriendOfTheTrend
16
5min MACD scalp by JoelThis strategy is inspired by a youtuber called Joel on Crypto. He trades this using Ema, MACD indicators and his own experience. For more information, check out his Best Crypto Scalping Strategy for the 5 Min Time Frame video. I have tried to automate this a little. Long or Short trades are determined with a crossing of the fast Ema over the slow Ema for Long and the opposite for Short. Trades should only happen close to the crossovers. Then for Long we use the MACD indicator with a 1min TF (I had better results using the 5min) where we look for high peaks in negative values for Long and vice versa for Shorts. These should be significantly higher than other peaks (or if you will lower peaks for a Long). Hence, the key is to detect high peaks on the histogram, which I try to achieve by checking if the last 2 values were higher than X bars back. If you want to make it even more specific, then you can turn on the additional checkbox which compares the current value to the average value of X bars back, and if it is greater than, say, 50% the value of the average (= 1.5x the average), then it's ok for the trade. I also noticed that the strategy often bought at the top or bottom, so I added a check that compares whether the last evaluated bar is the first rising bar (for Long) or falling bar (for Short). This can be turned on or off. Target profit 0,5% and stop loss 0,4% are based on his recommendation. The strategy is set to take only 1 trade at a time , and you can have a back tester table on. I'm still a pine script beginner, so the strategy is certainly not perfect and could be improved. If you have any tips on how to improve it further, please let me know. I will try to update it when I have time. I would also like to thank Joel on Crypto for sharing the strategy and @ZenAndTheArtOfTrading for his great library and code (thanks to him we have a back tester table in here), but especially his educational videos on youtube, which taught me a lot about pine script.
Pine Script® Strategie
von Zippy111
67
Crypto Scalper Divergence Macd Psar Ema 200This is a very efficient crypto scalper adapted to very short timeframes, however it can be optimized for other timeframes and assests as well. Its components are MACD P SAR EMA 200 Risk management Rules for entry: For short : we have an uptrend on PSAR , histogram is positive (divergence MACD) and close of a candle is below EMA 200 For long : we dont have an uptrend on PSAR, histogram is negative(divergence MACD) and close of a candle is above EMA 200 Rules for exit: We exit when we either find a reverse condition than the entry one, or based on stop loss/take profit that are calculated on % movements of the price. If you have any questions, let me know !
Pine Script® Strategie
von exlux
26
Chaikin Money Flow + MACD + ATRHere I present you on of Trade Pro's Trading Idea: Chaikin Money Flow + MACD + ATR. This strategy is not as profitable as it can be seen in one of his videos. In the forex market, the strategy could reach a maximum of 35% profitability. I have, as some of my followers have requested, created an overview of the current position, risk and leverage settings in the form of a table. Furthermore, one can again swap between short and long positions. It is now possible to select or deselect individual indicators. I have chosen the ATR alone as a take profit stop loss, as in his strategy. A position is only triggered as soon as all prerequisites have been fulfilled and a command is executed. This prevents false triggering by bots and repainting. ----------------------------------------------------------------------------------- How does the strategy work? ENTRY Long The MACD indicator must be above the zero line. Then the K line must cross the D line. Finally, when this happens, the Money Flow Index must be above the zero line. Short Contrary to the premise of long positions. EXIT ATR Exit The value of ATR at the time of buying is multiplied by the value entered in "Profit factor ATR" and "Stop factor ATR". As soon as the price reaches this value, it is closed. Important The script must be optimized for each coin or currency pair. I will publish a guide to the strategy shortly. There I will explain how the table works and how to set the strategy correctly. The results of the strategy are without commissions and leverage. If you have any questions or feedback, please let me know in the comments.
Pine Script® Strategie
von TradingStrategyCheck
3
MACD Crossover trend strategy, Long and ShortHey everybody, This is my first strategy and script I wrote mostly myself. There's tons of content out there to learn how to code in Pinescript and it's exactly what I wanted and needed in this time of my life. In any case, I made a rather simple MACD crossover strategy that only takes trades in the direction of both EMA and SMA (there are inputs to change the length of the moving averages and lots of other stuff too). If the MACD line crosses upwards on the signal line, while above the zero point of the histogram and the price is above EMA + SMA , it's a long signal. If the MACD line cosses downards on the signal line, while below zero on the histogram and the price is below EMA + SMA , it's a short signal. There are a lot of default variables that make no sense, for basically any symbol you're going to be looking at. You're going to have to adjust the EMA , SMA , backtest date, take profit, stop loss and all that good stuff yourself to find decently profitable parameters. I made this myself because I couldn't really find a strategy out there that allowed for so much customizing and it's an easy way to get started in Pinescript. If you have any suggestions, tips or you see a flatout mistake in my code, please let me know. I'm still learning, everyday and I'm enjoying every second of it.
Pine Script® Strategie
von conflixx95493
1
Simple and efficient MACD crypto strategy with risk managementToday I am glad to bring you another great creation suited for crypto markets. MARKET Its a simple and efficient strategy, designed for crypto markets( btcusd , btcusdt and so on), and suited for for higher time charts : like 1hour, 4hours, 1 day and so on. Preferably to use 1h time charts. COMPONENTS MACD with simple moving average ENTRY DESCRIPTION For entries we have : We check the direction with MACD . Depending if its an uptrend and positive level on histogram of MACD we go long, otherwise we go short. RISK MANAGEMENT In this strategy we use a stop loss based on our equity. For this example I choosed a 2% risk .That means if our account has 100.000 eur, it will automatically close the trade if we lose 2.000. We dont use a take profit level. In this example also we use a 100.000 capital account, risking 5% on each trade, but since its underleveraged, we only use 5000 of that ammount on every trade. With leveraged it can be achieved better profits and of course at the same time we will encounter bigger losses. The comission applied is 5$ and a slippage of 5 points aswell added. For any questions or suggestions regarding the script , please let me know.
Pine Script® Strategie
von SoftKill21
2
High/low crypto strategy with MACD/PSAR/ATR/EWaveToday I am glad to bring you another great creation of mine, this time suited for crypto markets. MARKET Its a high and low strategy, designed for crypto markets( btcusd , btcusdt and so on), and suited for for higher time charts : like 1hour, 4hours, 1 day and so on. Preferably to use 1h time charts. COMPONENTS Higher high and lower low between different candle points MACD with simple moving average PSAR for uptrend and downtrend Trenddirection made of a modified moving average and ATR And lastly elliot wave oscillator to have an even better precision for entries and exits. ENTRY DESCRIPTION For entries we have : when the first condition is meet(we have a succession on higher high or lower lows), then we check the macd histogram level, then we pair that with psar for the direction of the trend, then we check the trend direction based on atr levels with MA applied on it and lastly to confirm the direction we check the level of elliot wave oscillator. If they are all on the same page we have a short or a long entry. STATS Its a low win percentage , we usually have between 10-20% win rate, but at the same time we use a 1:30 risk reward ratio . By this we achieve an avg profit factor between 1.5- 2.5 between different currencies. RISK MANAGEMENT In this example, the stop loss is 0.5% of the price fluctuation ( 10.000 -> 9950 our sl), and tp is 15% (10.000 - > 11500). In this example also we use a 100.000 capital account, risking 5% on each trade, but since its underleveraged, we only use 5000 of that ammount on every trade. With leveraged it can be achieved better profits and of course at the same time we will encounter bigger losses. The comission applied is 5$ and a slippage of 5 points aswell added. For any questions or suggestions regarding the script , please let me know.
Pine Script® Strategie
von SoftKill21
MACD Multiple Time Frames Weighted Momentum Score OscillatorThis script looks at the current momentum direction (up or down) for the 5 minute, 30 minute, 1 hour, 4 hour and daily and allows you to set scores of importance to these. These scores are then added up to create an oscillator matching your preferences. Tune the indicator to match what you believe is the most important time frames that people use and score it accordingly. The values I put by default are just for demonstration. For example, (and if you want to test to verify it's working), set the scores to 0 for everything except for the daily). Look at the daily macD by adding it as an indicator and set a score. Whenever the macD is trending up it will add the appropriate value to the score and likewise remove it when it's not. Enjoy!
Pine Script® Indikator
von Gentleman-Goat
4
Ampleforth Rebase MACDThis script reveals Ampleforth rebase levels which are going to always work. In addition to that is MACD crossovers serving as potential buy/sell entries. You can set alerts for MACD crossovers and price entering balanced value area (0.96 - 1.06). MACD signals can be used to automatically open a position and entering a balanced value area can be used as take-profit. Since the price will always move to this level, using this strategy without leverage should be profitable. Ampleforth seems like a nice asset to trade since it is unlikely to correlate with anything else. At least not when it gets to the extreme levels.
Pine Script® Indikator
von OrcChieftain
2
WMA + MACD strategy with trailing stopHi! That's my first strategy. I already learn pine, so i will work on it more. Now i search how to make trailing stop working. "WMA + MACD strategy with traiing stop" is very simple strategy which is designated for stocks market. It is created only to take long positions. Buy signal is when WMA(120) is below price and macd(10,20,10) histogram is higher than 0. Position should be automaticly closed when price hits stoploss level. One transaction should be max 20% of our capital and stoploss is set 3% lower than last closing price.
Pine Script® Strategie
von heniu_1
1
[fikira] MACD & RSI+Stoch + DivergencesThis is a new version of my "Divergences" Compared to my "Divergences (Pivots)", this is calculated totally different There are 3 options: - MACD - RSI - Stoch RSI Since this script is very heavy in calculation it is limited in time (= inspired from a script of "Che_Trader") Also it uses "max_bars_back" (=1000) For MACD and Stoch RSI there is a "custom Divergences Period", which compares more then 7 Pivot Points, the higher the number, the less reliable, it is not necessary to use this, but it is there, also you can change the "leftbars" and "rightbars", again, it is not necessary to change, but you can... Linewidth and style of the Divergences lines can be changed Thank you!
Pine Script® Indikator
von fikira
50