Black FridayBis zu 80 % RABATT

In den Scripts nach "bear" suchen

Bitcoin Bullish Percent IndexHello Traders, This is Bitcoin Bullish Percent Index script. First lets talk about what the Bullish Percent Index and how it is calculated: "The Bullish Percent Index (BPI) is a breadth indicator based on the number of securities on Point & Figure Buy Signals, Developed by Abe Cohen in the mid-1950s. Because a security is either on a P&F Buy or Sell Signal, there is no ambiguity when it comes to P&F charts. This makes BPI a straightforward indicator with clearly defined signals." The calculation is straightforward and simple: (Number of securities on P&F Buy signals) / (Total number of securities) Here you can see what the P&F buy signal is: In this script I choose 40 cryptos that is correlated ( as I see ) with BTC (including BtcUsdt). in the first part the script creates P&F chart for each security and check if there is Buy or Sell signal and sum the buy signals if there is. in the second part it creates P&F chart by using the P&F buy/sell signals coming from the securities P&F chart. because of complicated calculation the script may need a few seconds to load. in the first part reversal value is 3 by default but you can set different values as reversal. sometimes I got better results with reversal = 5. in BPI part reversal = 3 is used. so each box represents 2% (each X or O is a box). And this means it takes at least a 6% move in BPI for a reversal. the Bullish Percent Index favors the bulls when above 50% and the bears when below 50%. The bulls have the edge when over 50% of stocks are on a P&F Buy Signal. BPI is also considered overbought when above 70% and oversold when below 30%. BPI can move between 0 and 100. Because of 40 securities are used in the script and all different prices, it uses Percentage scaling only. it can calculate the Percentage automatically by using the time frame of the chart or you can set it as you wish. The Signals coming from BPI: Bull Alert: BPI is below 30% and then forms a new column of X's (rises) Bear Alert: BPI is above 70% and then forms a new column of O's that decline below 70%. Bull Confirmed: BPI is on a P&F buy signal and in a column of X's (rising). Bear Confirmed: BPI is on a P&F sell signal and in a column of O's (falling). Bull Correction: BPI is on a P&F buy signal, but currently falling (column of O's). Bear Correction: BPI is on a P&F sell signal, but currently rising (column of X's). If you are not familiar with Bullish Percent Index you better search it on the net to get more info, you can find a lot of articles and web sites about BPI. as I remember I developed the script 6-7 months ago and today I had chance to publish it as it was Enjoy!
Pine Script® Indikator
von LonesomeTheBlue
56
EMA 5/10/21 SMA 50/100/200The Script is mixture of both EMAs and SMAs. EMA 5/10/21 are powerful indicators for short term providing more weightage to the recent prices. SMA 50/100/200 provide the long term view. 5 Day EMA: This is a sign of strong momentum. It tracks the trend in the short term time frame. This is support in the strongest up trends. This line can only be used in low volatility trends with strong momentum. A break back above this line is a sign for me that an uptrend may be resuming. I primarily use it as an end of day trailing stop. It is rare that this line does not break intraday, even in the strongest trending markets. • 10 day EMA: The 10 day EMA is a great moving average to use to keep you on the right side of the major market trend. It is usually the first line to be lost before any real trouble begins. It can be used as a standalone signal in some stocks and markets that tend to trend strongly in one direction for long periods. • 21 day EMA: This is the intermediate term moving average. It is generally the last line of support in a volatile uptrend. To me, it is the inevitable reversion to the mean in a market when it finally pulls back after an extended trend. • 50 day SMA: This is the line that strong leading stocks typically pull back to. This is usually the support level for strong uptrends. It is normal for uptrending markets to pull back to this line and find support. Most bull markets and uptrends will pull back to this level. It is generally a great “Buy the dip” level. • 100 day SMA: This is the line that provides the support between the 50 day and the 200 day. If it does not hold as support, there is a high probability that the 200 day SMA is the next stop. This is the deeper pullback level in bull markets and uptrends. It usually presents a great risk/reward ratio in bull markets. • 200 day SMA: Bulls like to buy dips when markets are trading above the 200 day moving average, while bears sell rallies short below it. Bears usually win below this line, as the 200 day becomes longer term resistance, and bulls buy pullbacks to the 200 day as long as the price stays above it. This line is one of the biggest signals in the market telling you which side to be on. Bull above, Bear below. Bad things happen to stocks and markets when this line is lost.
Pine Script® Indikator
von vve
3
Trend following 3 EMA & Bullish Engulfing indicator for ForexHello world, I now took the time and puzzled through my own indicator. The idea: Main "strategy" uses 3 EMAs (8, 13 and 21) to attain trend-relevant information. Then we look for bullish & bearing engulfing candles which indicate and pullback into trend direction and a gain in momentum. Trading purpose: One could now enter with next open. SL at low/high of engulfing candle. TP at e.g. 1.25 of that candles size. Security: There are two security functions build in. We check for higher timeframe confirmation. This is done by checking if current trend is in accordance with the EMA of the next higher timframe. Standard-deviation is 3 on default. Can be changed in the inputs. Alerts: Until now there is just one alertcondition programmed. It alerts for every engulfing candle (bullish and bearish). More will follow in further versions. Inputs: I build in multiple inputs. - switch on/off the security EMA's - define security trend backcheck - define the higher timeframe (15min/1h, 1h/240, 4h/D, D/W) Happy to take feedback or contr. All the best, c4ss10p314
Pine Script® Indikator
von c4ss10p314
2
Monthly MA Close Generates buy or sell signal if monthly candle closes above or below the signal MA. Long positions only. Inputs: -Change timeframe MA -Change period MA -Use SMA or EMA -Display MA -Use another ticker as signal -Select time period for backtesting This script is not necessarily written to maximize profits, but to minimize losses. Although it can outperform 'Buy & Hold' on some occasions when there is a multiple month bearisch trend. You can optimise this strategy by changing the signal MA inputs. I would suggest aiming for the best Profit Factor starting from the monthly ("M") setting. You can always fine-tune the results at a lower timeframe. The option to use another ticker for providing signals can give you a more stable and unified results. For example using AMEX:SPY as signal with default parameters gives better results with NASDAQ:AAPL than if you would use NASDAQ:AAPL itself. I used the anti-repainting function from PineCoders to prevent repainting. This script is best used for multi-month trading positions & Daily or 4H setting of your chart.
Pine Script® Strategie
von universique
2
Delta Volume Candles [LucF]█  OVERVIEW This indicator plots on-chart volume delta information using candles that can replace your normal candles, tops and bottoms appended to normal candles, optional MAs of those tops and bottoms levels, a divergence channel and a chart background. The indicator calculates volume delta using intrabar analysis, meaning that it uses the lower timeframe bars constituting each chart bar. █  CONCEPTS Volume Delta ​The ​volume delta concept divides a bar's ​volume in "up" and "down" ​volumes. The delta is calculated by subtracting down ​volume from up ​volume. Many calculation techniques exist to isolate up and down ​volume within a bar. The simplest use the polarity of interbar price changes to assign their ​volume to up or down slots, e.g., On Balance Volume or the Klinger Oscillator . Others such as Chaikin Money Flow use assumptions based on a bar's OHLC values. The most precise calculation method uses tick data and assigns the ​volume of each tick to the up or down slot depending on whether the transaction occurs at the bid or ask price. While this technique is ideal, it requires huge amounts of data on historical bars, which considerably limits the historical depth of charts and the number of symbols for which tick data is available. Furthermore, historical tick data is not yet available on TradingView. This indicator uses intrabar analysis to achieve a compromise between the simplest and most precise methods of calculating ​volume delta. It is currently the most precise method usable on TradingView charts. TradingView's Volume Profile built-in indicators use it, as do the CVD - Cumulative ​Volume Delta Candles and CVD - Cumulative Volume Delta (Chart) indicators published from the TradingView account . My Delta Volume Channels and Volume Delta Columns Pro indicators also use intrabar analysis. Other ​volume delta indicators such as my Realtime 5D Profile use realtime chart updates to calculate volume delta without intrabar analysis, but that type of indicator only works in real time; they cannot calculate on historical bars. This is the logic I use to determine the polarity of intrabars, which determines the up or down slot where its ​volume is added:  • If the intrabar's open and close values are different, their relative position is used.  • If the intrabar's open and close values are the same, the difference between the intrabar's close and the previous intrabar's close is used.  • As a last resort, when there is no movement during an intrabar, and it closes at the same price as the previous intrabar, the last known polarity is used. Once all intrabars making up a chart bar have been analyzed and the up or down property of each intrabar's ​volume determined, the up volumes are added, and the down volumes subtracted. The resulting value is ​volume delta for that chart bar, which can be used as an estimate of the buying/selling pressure on an instrument. Not all markets have volume information. Without it, this indicator is useless. Intrabar analysis Intrabars are chart bars at a lower timeframe than the chart's. The timeframe used to access intrabars determines the number of intrabars accessible for each chart bar. On a 1H chart, each chart bar of an active market will, for example, usually contain 60 bars at the lower timeframe of 1min, provided there was market activity during each minute of the hour. This indicator automatically calculates an appropriate lower timeframe using the chart's timeframe and the settings you use in the script's "Intrabars" section of the inputs. As it can access lower timeframes as small as seconds when available, the indicator can be used on charts at relatively small timeframes such as 1min, provided the market is active enough to produce bars at second timeframes. The quantity of intrabars analyzed in each chart bar determines:  • The precision of calculations (more intrabars yield more precise results).  • The chart coverage of calculations (there is a 100K limit to the quantity of intrabars that can be analyzed on any chart,   so the more intrabars you analyze per chart bar, the less chart bars can be calculated by the indicator). The information box displayed at the bottom right of the chart shows the lower timeframe used for intrabars, as well as the average number of intrabars detected for chart bars and statistics on chart coverage. Balances This indicator calculates five balances from volume delta values. The balances are oscillators with a zero centerline; positive values are bullish, and negative values are bearish. It is important to understand the balances as they can be used to:  • Color candle bodies.  • Calculate body and top and bottom divergences.  • Color an EMA channel.  • Color the chart's background.  • Configure markers and alerts. The five balances are: 1 — Bar Balance : This is the only balance using instant values; it is simply the subtraction of the down volume​ from the up volume​ on the bar, so the instant volume delta for that bar. 2 — Average Balance : Calculates a distinct EMA for both the up and down volumes, and subtracts the down EMA from the up EMA.   The result is akin to MACD's histogram because it is the subtraction of two moving averages. 3 — Momentum Balance : Starts by calculating, separately for both up and down volumes, the difference between the same EMAs used in "Average Balance" and   an SMA of twice the period used for the "Average Balance" EMAs. The difference for the up side is subtracted from the difference for the down side,   and an RSI of that value is calculated and brought over the −50/+50 scale. 4 — Relative Balance : The reference values used in the calculation are the up and down EMAs used in the "Average Balance".   From those, we calculate two intermediate values using how much the instant up and down volumes on the bar exceed their respective EMA — but with a twist.   If the bar's up volume​ does not exceed the EMA of up volume​, a zero value is used. The same goes for the down volume​ with the EMA of down volume​.   Once we have our two intermediate values for the up and down volumes exceeding their respective MA, we subtract them. The final value is an ALMA of that subtraction.   The rationale behind using zero values when the bar's up/down volume​ does not exceed its EMA is to only take into account the more significant volume​.   If both instant volume​ values exceed their MA, then the difference between the two is the signal's value.   The signal is called "relative" because the intermediate values are the difference between the instant up/down volumes and their respective MA.   This balance flatlines when the bar's up/down volumes do not exceed their EMAs, which makes it useful to spot areas where trader interest dwindles, such as consolidations.   The smaller the period of the final value's ALMA, the more easily it will flatline. These flat zones should be considered no-trade zones. 5 — Percent Balance : This balance is the ALMA of the ratio of the "Bar Balance" over the total volume for that bar. From the balances and marker conditions, two more values are calculated: 1 — Marker Bias : This sums the up/down (+1/‒1) occurrences of the markers 1 to 4 over a period you define, so it ranges from −4 to +4, times the period.   Its calculation will depend on the modes used to calculate markers 3 and 4. 2 — Combined Balances : This is the sum of the bull/bear (+1/−1) states of each of the five balances, so it ranges from −5 to +5. The periods for all of these balances can be configured in the "Periods" section at the bottom of the script's inputs. As you cannot see the balances on the chart, you can use my Volume Delta Columns Pro indicator in a pane; it can plot the same balances, so you will be able to analyze them. Divergences In the context of this indicator, a divergence is any bar where the bear/bull state of a balance (above/below its zero centerline) diverges from the polarity of a chart bar. No directional bias is assigned to divergences when they occur. Candle bodies and tops/bottoms can each be colored differently on divergences detected from distinct balances. Divergence Channel The divergence channel is the space between two levels (by default, the bar's open and close ) saved when divergences occur. When price (by default the close ) has breached a channel and a new divergence occurs, a new channel is created. Until that new channel is breached, bars where additional divergences occur will expand the channel's levels if the bar's price points are outside the channel. Prices breaches of the divergence channel will change its state. Divergence channels can be in one of three different states:  • Bull (green): Price has breached the channel to the upside.  • Bear (red): Price has breached the channel to the downside.  • Neutral (gray): The channel has not yet been breached. █  HOW TO USE THE INDICATOR I do not make videos to explain how to use my indicators. I do, however, try hard to include in their description everything one needs to understand what they do. From there, it's up to you to explore and figure out if they can be useful in your trading practice. Communicating in videos what this description and the script's tooltips contain would make for very long videos that would likely exceed the attention span of most people who find this description too long. There is no quick way to understand an indicator such as this one because it uses many different concepts and has quite a bit of settings one can use to modify its visuals and behavior — thus how one uses it. I will happily answer questions on the inner workings of the indicator, but I do not answer questions like "How do I trade using this indicator?" A useful answer to that question would require an in-depth analysis of who you are, your trading methodology and objectives, which I do not have time for. I do not teach trading. Start by loading the indicator on an active chart containing volume information. See here if you need help. The default configuration displays:  • Normal candles where the bodies are only colored if the bar's volume has increased since the last bar.   If you want to use this indicator's candles, you may want to disable your chart's candles by clicking the eye icon to the right of the symbol's name in the top left of the chart.  • A top or bottom appended to the normal candles. It represents the difference between up and down volume for that bar   and is positioned at the top or bottom, depending on its polarity. If up volume is greater than down volume, a top is displayed. If down volume is greater, a bottom is plotted.   The size of tops and bottoms is determined by calculating a factor which is the proportion of volume delta over the bar's total volume.   That factor is then used to calculate the top or bottom size relative to a baseline of the average candle body size of the last 100 bars.  • An information box in the bottom right displaying intrabar and chart coverage information.  • A light red background when the intrabar volume differs from the chart's volume by more than 1%. The script's inputs contain tooltips explaining most of the fields. I will not repeat them here. Following is a brief description of each section of the indicator's inputs which will give you an idea of what the indicator can do: Normal Candles is where you configure the replacement candles plotted by the script. You can choose from different coloring schemes for their bodies and specify a unique color for bodies where a divergence calculated using the method you choose occurs. Volume Tops & Botttoms is where you configure the display of tops and bottoms, and their EMAs. The EMAs are calculated from the high point of tops and the low point of bottoms. They can act as a channel to evaluate price, and you can choose to color the channel using a gradient reflecting the advances/declines in the balance of your choice. Divergence Channel is where you set up the appearance and behavior of the divergence channel. These areas represent levels where price and volume delta information do not converge. They can be interpreted as regions with no clear direction from where one will look for breaches. You can configure the channel to take into account one or both types of divergences you have configured for candle bodies and tops/bottoms. Background allows you to configure a gradient background color that reflects the advances/declines in the balance of your choice. You can use this to provide context to the volume delta values from bars. You can also control the background color displayed on volume discrepancies between the intrabar and the chart's timeframe. Intrabars is where you choose the calculation mode determining the lower timeframe used to access intrabars. The indicator uses the chart's timeframe and the type of market you are on to calculate the lower timeframe. Your setting there should reflect which compromise you prefer between the precision of calculations and chart coverage. This is also where you control the display of the information box in the lower right corner of the chart. Markers allows you to control the plotting of chart markers on different conditions. Their configuration determines when alerts generated from the indicator will fire. Note that in order to generate alerts from this script, they must be created from your chart. See this Help Center page to learn how. Only the last 500 markers will be visible on the chart, but this will not affect the generation of alerts. Periods is where you configure the periods for the balances and the EMAs used in the indicator. The raw values calculated by this script can be inspected using the Data Window. █  INTERPRETATION Rightly or wrongly, volume delta is considered by many a useful complement to the interpretation of price action. I use it extensively in an attempt to find convergence between my read of volume delta and price movement — not so much as a predictor of future price movement. No system or person can predict the future. Accordingly, I consider people who speak or act as if they know the future with certainty to be dangerous to themselves and others; they are charlatans, imprudent or blissfully ignorant. I try to avoid elaborate volume delta interpretation schemes involving too many variables and prefer to keep things simple:  • Trends that have more chances of continuing should be accompanied by VD of the same polarity.   In trends, I am looking for "slow and steady". I work from the assumption that traders and systems often overreact, which translates into unproductive volatility.   Wild trends are more susceptible to overreactions.  • I prefer steady VD values over wildly increasing ones, as large VD increases often come with increased price volatility, which can backfire.   Large VD values caused by stopping volume will also often occur on trend reversals with abnormally high candles.  • Prices escaping divergence channels may be leading a trend in that direction, although there is no telling how long that trend will last; could be just a few bars or hundreds.   When price is in a channel, shifts in VD balances can sometimes give us an idea of the direction where price has the most chance of breaking.  • Dwindling VD will often indicate trend exhaustion and predate reversals by many bars, but the problem is that mere pauses in a trend will often produce the same behavior in VD.   I think it is too perilous to infer rigidly from VD decreases. Divergence Channel Here I have configured the divergence channels to be visible. First, I set the bodies to display divergences on the default Bar Balance. They are indicated by yellow bodies. Then I activated the divergence channels by choosing to draw levels on body divergences and checked the "Fill" checkbox to fill the channel with the same color as the levels. The divergence channel is best understood as a direction-less area from where a breach can be acted on if other variables converge with the breach's direction: Tops and Bottoms EMAs I find these EMAs rather interesting. They have no equivalent elsewhere, as they are calculated from the top and bottom values this indicator plots. The only similarity they have with volume-weighted MAs, including VWAP, is that they use price and volume. This indicator's Tops and Bottoms EMAs, however, use the price and volume delta. While the channel differs from other channels in how it is calculated, it can be used like others, as a baseline from which to evaluate price movement or, alternatively, as stop levels. Remember that you can change the period used for the EMAs in the "Periods" section of the inputs. This chart shows the EMAs in action, filled with a gradient representing the advances/decline from the Momentum balance. Notice the anomaly in the chart's latest bars where the Momentum balance gradient has been indicating a bullish bias for some time, during which price was mostly below the EMAs. Price has just broken above the channel on positive VD. My interpretation of this situation would be that it is a risky opportunity for a long trade in the larger context where the market has been in a downtrend since the 5th. Intrepid traders choosing to enter here could do so with a "make or break" tight stop that will minimize their losses should the market continue its downtrend while hopefully preserving the potential upside of price continuing on the longer-term uptrend prevalent since the 28th: █  NOTES Volume If you use indicators such as this one which depends on volume information, it is important to realize that the volume data they consume comes from data feeds, and that all data feeds are NOT created equally. Those who create the data feeds we use must make decisions concerning the nature of the transactions they tally and the way they are tallied in each feed, and these decisions affect the nature of our volume data. My Volume X-ray publication discusses some of the reasons why volume information from different timeframes, brokers/exchanges or sectors may vary considerably. I encourage you to read it. This indicator's display of a warning through a background color on volume discrepancies between the timeframe used to access intrabars and the chart's timeframe is an attempt to help you realize these variations in feeds. Don't take things for granted, and understand that the quality of a given feed's volume information affects the quality of the results this indicator calculates. Markets as ecosystems I believe it is perilous to think that behavioral patterns you discover in one market through the lens of this or any other indicator will necessarily port to other markets. While this may sometimes be the case, it will often not. Why is that? Because each market is its own ecosystem. As cities do, all markets share some common characteristics, but they also all have their idiosyncrasies. A proportion of a city's inhabitants is always composed of outsiders who come and go, but a core population of regulars and systems is usually the force that actually defines most of the city's observable characteristics. I believe markets work somewhat the same way; they may look the same, but if you live there for a while and pay attention, you will notice the idiosyncrasies. Some things that work in some markets will, accordingly, not work in others. Please keep that in mind when you draw conclusions. On Up/Down or Buy/Sell Volume Buying or selling volume are misnomers, as every unit of volume transacted is both bought and sold by two different traders. While this does not keep me from using the terms, there is no such thing as “buy only” or “sell only” volume. Trader lingo is riddled with peculiarities. Without access to order book information, traders work with the assumption that when price moves up during a bar, there was more buying pressure than selling pressure, just as when buy market orders take out limit ask orders in the order book at successively higher levels. The built-in volume indicator available on TradingView uses this logic to color the volume columns green or red. While this script’s calculations are more precise because it analyses intrabars to calculate its information, it uses pretty much the same imperfect logic. Until Pine scripts can have access to how much volume was transacted at the bid/ask prices, our volume delta calculations will remain a mere proxy. Repainting  • The values calculated on the realtime bar will update as new information comes from the feed.  • Historical values may recalculate if the historical feed is updated or when calculations start from a new point in history.  • Markers and alerts will not repaint as they only occur on a bar's close. Keep this in mind when viewing markers on historical bars,   where one could understandably and incorrectly assume they appear at the bar's open. To learn more about repainting, see the Pine Script™ User Manual's page on the subject . Superfluity In "The Bed of Procrustes", Nassim Nicholas Taleb writes: To bankrupt a fool, give him information . This indicator can display a lot of information. The inevitable adaptation period you will need to figure out how to use it should help you eliminate all the visuals you do not need. The more you eliminate, the easier it will be to focus on those that are the most useful to your trading practice. Don't be a fool. █  THANKS Thanks to alexgrover for his Dekidaka-Ashi indicator. His volume plots on candles were the inspiration for my top/bottom plots. Kudos to PineCoders for their libraries. I use two of them in this script: Time and lower_tf . The first versions of this script used functionality that I would not have known about were it not for these two guys: — A guy called Kuan who commented on a Backtest Rookies presentation of their Volume Profile indicator. — theheirophant , my partner in the exploration of the sometimes weird abysses of request.security() ’s behavior at lower timeframes.
Pine Script® Indikator
von LucF
113
Commercial Movement Index-BuschiEnglish Inspired by the book "The Commitments of Traders Bible" by Stephen Briese, this indicator is a follow-up of my already published "Commercial Index-Buschi". Here, the Commercial Index isn't shown in values from 0 to 100, but in how far the value changed from a given timeframe (default Movement Reference: 6 weeks). Therefore it ranges from 100 (bullish move from the Commercials during the last weeks) to -100 (bearish move). Deutsch Inspiriert durch das Buch "The Commitments of Traders Bible" by Stephen Briese, ist dieser Indikator eine Weiterentwicklung meines bereits veröffentlichten Skriptes "Commercial Index-Buschi". Hier wird der Commercial Index nicht in Werten von 0 bis 100 angezeigt, sondern in wieweit er sich innerhalb eines vorgegebenen Zeitfensters (Standard: Movement Reference: 6 Wochen) verändert hat. Daher schwankt er zwischen 100 (bullishe Bewegung der Commercials innerhalb der letzten Wochen) und -100 (bearishe Bewegung).
Pine Script® Indikator
von MagicEins
2
Visual RSI [LucF]Visual RSI offers a different way of looking at RSI by providing a composite representation of 9 different RSI-generated components. Instead of focusing on one line only, this approach blends multiple sources to provide the viewer with a larger context RSI-based picture. For those who don’t want to read • Green in bullish (>50) zone is the most bullish. • Red in bullish zone doesn’t necessarily mean bearish—it just means bullish strength is weakening. It may be just a pause before a reprise or exhaustion signalling a reversal—impossible to tell. • The same in inverse applies to the bearish zone (<50). For those who want to understand The nine components making up Visual RSI are: • a current timeframe RSI • a higher timeframe RSI • the delta between these two RSI lines • for each of these three basic components, two independent Bollinger band: one calculated for the bullish section of the scale (>50) and a separate one calculated for the lower bearish region. Dual BBs In my view, RSI’s position with regards to the centerline is much more important than its position in extreme areas. Why? Because the building block of RSI is the ratio of the averages of up/down moves during the RSI period. When the average of ups is greater, RSI is > 50. So while a rising signal starting from 20 let’s say, indicates that the rate of change is increasing, only when it crosses 50 can we say that sentiment balance has truly become bullish, and this information is more reliable than the signal being at a level corresponding to whatever estimate we make of what constitutes an extreme value. In my landscape, the general balance of a ratio provides more valuable information than the ratio’s exact value. The idea behind the dual BBs is to provide independent tracking information for both halves of the indicator’s space, which I find more useful than the normal method of simply adding a multiple of the standard deviation on both sides of the mean. With dual BBs, the upper BB will never go lower than the indicator’s centerline, and the lower BB will never go higher. The upper BB focuses on upper-bound volatility when the signal is bearish, and the lower BB focuses on downside volatility when the signal is bearish. The functions used to calculate the independent BBs are reusable on other signals if a centerline can be defined for them. A clamping percentage is implemented, so that when a BB line is hugging the centerline it clamps to it. This helps in providing earlier signals when they use the BB line states. Providing context to RSI What RSI measures indirectly is the balance in the rate of change—or the speed of price movement, but not its instant value, otherwise RSI would be even noisier. More precisely, RSI represents the relative strength of the up/down movement in the last n bars of RSI’s length, with 14 often used because that’s what Wilder proposed (Visual RSI’s defaults are 20 for the current timeframe and 40 for the higher timeframe). At every bar, a new value is added to the equation and an old value carrying equal weight is dropped, so a large dropped off value will have more impact on RSI’s value if the new bar’s move is small. This accounts for some of RSI’s speed in identifying exhaustion after important moves, but almost for some of its noise. Visual RSI is the result of trying to drown RSI’s noise in the context of other informational streams, while simultaneously providing even faster information than RSI alone, by giving more visual weight to the delta between the current and higher timeframe RSI’s. How to read Visual RSI The default settings show all 9 basic components as green/red areas of intensities varying with their importance. The most intense colors are reserved for the delta RSI and the BBs have the lightest intensities. The individual lines of components are intentionally difficult to distinguish so that focus is first on the general picture, including the all-important six-state background, and then on the delta RSI. One entry setup could be reversals in a larger trend context, so low pivots of the delta in a fully bullish context (a green background in the upper section of the indicator), and inversely, high pivots in a fully bearish context (a red background in the lower section of the indicator). Please resist the common misconception, when interpreting RSI, that a reversal in the signal will necessarily lead to a reversal in price. Each trend has its rhythm. Only machine-generated price action can progress regularly. It’s normal for trends to take a breather for some time before they continue or reverse, as traders driving the trend experience emotional fatigue and gradual fear. RSI reversals merely signify that such a breather has occurred—nothing more. Only the larger context can provide information that can situate that pause and put more meaningful odds on it having more probability of continuing in one direction or the other. This is the reasoning behind the setup just described. Features • All components can be hidden, displayed as a simple line, a uniformly colored fill, or a green/red fill (the default). • The background can be colored using 9 different methods, including 3 six-state methods using the rising/falling BB lines of the 3 basic components. These six states allow for bullish/bearish/neutral sentiment in both the upper and lower regions of the indicator. A bearish (dark red) background in the bullish (>50) section of the indicator represents decreasing bullishness. A bearish (slightly brighter red) in the bearish (<50) section of the indicator means incresingly bearish sentiment. The six-state backgrounds allow for neutral (no color) sentiment when no compelling signs can be found to conclude anything with meaningful odds. The default background uses the six-state method on the higher timeframe RSI’s BBs because I find it the most useful, as it represents the largest—and slowest—context sentiment among all the indicator’s components. • A thin status bar in the top part of the indicator also allows selection of the same 9 methods to color it. The default is a triple-state system using the rising/falling characteristics of the current timeframe RSI’s BBs to provide a short-term counterbalance to the long-term background. • Three different markers can be configured using approximately 70 permutations each, each filtered by 20 different filter permutations. When modification of the relevant parameters in the script’s Settings/Settings/Parameters section is added, possibilities are almost endless. If the generated signals are then fed into the PineCoders Engine and combined with the Engine’s own options, the permutations go up another order of magnitude, and changes to any setting can be instantly evaluated using the Engine’s backtesting results. • Five simple filters can be combined. They are additive. They include volume-related conditions and a chandelier, which I find useful because both volume and volatility (the chandelier using highs/lows and ATR) are sensible complementary sources to RSI’s momentum information. The filter’s state can be shown as a thin line at the bottom of the indicator. • Alerts can be configured using any of the marker/filter combinations mentioned. As usual, once your markers/filters are set up the way you want, create your alert from the chart/timeframe you want the alert to run on and be sure to use the “Once Per Bar Close” triggering condition. Use an alert message that will remind you of which combination of markers were used when creating the alert. • A plot providing entry signals for the PineCoders Backtesting & Trading Engine is supplied. It will use whichever marker/filter configuration is active to generate signals. • All higher timeframe information is non-repainting. Higher timeframe lines can be smoothed (the default). The selection of the higher timeframe can be made using 3 different methods: 1. By steps (if current timeframe <= 1 minute: 60 min, <= 60 min: 1D, <= 6H: 3D, <= 1D: 1W, <=1W: 1M, >1W: 12M) 2. By a user-defined multiple of the current timeframe 3. Using a fixed timeframe Thanks to: • Alex Orekhov aka @everget for the chandelier code. • @RicardoSantos who through a small remark early on, unknowingly put me on the track of eliminating noise through visual crowding. • The brilliant guys in the PineCoders Pro room for your knowledge, limitless creativity and constant companionship.
Pine Script® Indikator
von LucF
22
How To Use Dynamic ZonesExample of how to apply and use Dynamic Zones with an indicator by injecting it's source into my adaptation of the original idea by Leo Zamansky, Ph.D., and David Stendahl. • Load your desired oscillating indicator on your chart (CCI, RSI, etc). • Load my "How To Use Dynamic Zones" indicator on your chart. • In the "How To Use Dynamic Zones" indicator settings choose your desired oscillating indicator as the Oscillator Source. You will now have dynamic overbought and oversold levels. I have also included alerts which may be used to indicate when these conditions occur. If desired you may repeat the above process by loading additional indicators along with additional copies of my indicator to use with each oscillator. Oscillator Source: CLOSE uses your chosen indicator as a source or you may use price as a source Sample Length: 70 uses number of previous values for evaluating Hi is Above X% of Sample: 88 sets overbought zone Lo is Below X% of Sample: 88 sets oversold zone The simplest explanation of what these default settings are doing is that they take 70 previous values of your chosen indicator, then create an overbought level that is above 88% of those previous values and an oversold level that is below 88% of those previous values. As new bars form the levels are dynamically reevaluated and updated. --- "This investing style follows a very simple form of logic: Enter the market only when an oscillator has moved far above or below traditional trading levels. However, these oscillator driven systems lack the ability to evolve with the market because they use fixed buy and sell zones. Traders typically use one set of buy and sell zones for a bull market and substantially different zones for a bear market. And therein lies the problem. Once traders begin introducing their market opinions into trading equations, by changing the zones, they negate the system’s mechanical nature. The objective is to have a system automatically define its own buy and sell zones and thereby profitably trade in any market — bull or bear. Dynamic zones offer a solution to the problem of fixed buy and sell zones for any oscillator-driven system." Reference: Stocks & Commodities V15:7 (306-310): Dynamic Zones by Leo Zamansky, Ph.D., and David Stendahl --- NOTICE: This is an example script and not meant to be used as an actual strategy. By using this script or any portion thereof, you acknowledge that you have read and understood that this is for research purposes only and I am not responsible for any financial losses you may incur by using this script!
Pine Script® Indikator
von allanster
14
Total Power IndicatorHello traders! This indicator was originally developed by Daniel Fernandez (Currency Trader magazine, 2011). It is based on the two well-known indicators by Dr. Alexander Elder - Bulls Power and Bears Power. Signals 1) Long when Bull and Total lines indicate 100 (it happens rarely) 2) Short when Bear and Total lines indicate 100 (it happens rarely) 3) Bull and Bear lines crossovers 4) Long when Bull line crosses Total line from below 5) Short when Bear line crosses Total line from below 6) Long/Short when Bull/Bear lines cross adjustable level. Like and follow for more open source indicators! Happy Trading!
Pine Script® Indikator
von everget
13
Volume Strength Candles / Colored BarsIs Price Action Higher or Lower on STRONG or WEAK VOLUME from lookback (Strong or Weak Bulls // Strong or Weak Bears) Candles / Bars Indicate the Following (default 13 period lookback / Length) MAROON Bear Candle with STRONG VOLUME more than 150% of the lookback / length (13 default), STRONG Bear Candle Confirmed With Volume RED Bear Candle while VOLUME is BETWEEN 50% & 150% of the Lookback / Length (13 default), Neutral Bear Volume Neither strong or weak ORANGE Bear Candle with WEAK VOLUME (Less than 50% of the Length / Lookback) DARK GREEN Bull Candle with STRONG VOLUME MORE than 150% of lookback GREEN Bull Candle with Neutral VOLUME BETWEEN 50% & 150% of the lookback / Length AQUA Bull Candle with WEAK VOLUME less than 50% of the Lookback Is price confirmed by volume? Can Change the Lookback / Length from 13 Can Change the Colors and Transparency to easily see based off your chart background colors I recommend ZERO Transparency to easily identify volume strength (i use white background but many use black or other)
Pine Script® Indikator
von stokedstocks
4
Bitfinex Bitcoin BullishnessBased on contrary opinion in futures, I've adjusted this to Bitcoin, more thoroughly Bitfinex margin longs & shorts. Those unfamiliar with the concept, contrary opinion illustrates the psychological sentiment in the market by determining the degree of bullishness or bearishness among participants in the market. The principle holds that when the majority of people agree on anything, they are generally wrong, so following the principle you would analyse and look to take the other side of the trades. Consider this, once the market is extremely bullish, all bulls have already entered the market to an extent that one can't commit any more funds to the position. Even though Bitfinex margin positions are not like future trading, that every short must have someone taking the long side, one should understand that the majority of people do not make money on the market, so whenever this indicator goes too low or too high, one should look for a trend reversal. This indicator is in the range of 0 to 1 and the neutral position for a "healthy" market is 0.55ish. Some adjustments should probably be made according to the cryptocurrency markets and I might add this in the future updates, but as of now it's a good indicator for forecasts and to get a bigger picture on a timeframe of 1 DAY or longer charts. The base of the indicator is simple, amount of longs divided by the sum of shorts and longs. Also you can see, how only now, 10th of April, we are hitting new lows in the bearishness of the market.
Pine Script® Indikator
von KaurKirikall
Two Bar Break Line Alerts R1.0 by JustUncleLThis indicator with default settings is designed for BINARY OPTIONS trading. The indicator can also be used for Forex trading with some setting changes. The script shows Two Bar Pullback Break lines and alerts when those Break lines are Touched (broken) creating a short term momentum entry condition. For a Bullish Break (Green Up Arrow) to occur: first must have two (or three) consecutive bear (red) candles which is followed by a bull (green) candle creating a pivot point. The breakout occurs then the High of the current Bull (green) exceeds the highest point of the previous two (or three) pivotal bear candles. The green channel Line shows where the current Bullish BreakOut occurs. For a Bearish Break (Red Down Arrow) to occur: first must have two (or three) consecutive bull (green) candles which is followed by a bear (red) candle creating a pivot point. The breakout occurs when the Low of the current Bear (red) drops below the lowest point of the previous two (or three) pivotal Bull candles. The red channel Line shows where the current Bearish BreakOut occurs. The break Line Arrows can optionally be filtered by the Coloured MA (enabled by default), a longer term directional MA (disabled by default) and/or a MACD condition (enabled by default) as a momentum filter. You can optionally select three Bar break lines instead of two. The three bar break lines are actually equivalent to Guppy's Three Bar Count Back Line method for trade entries (see Guppy's video reference below). Included in this indicator is an ability to display some basic Binary Option statistics, when enabled (enabled by default) it shows Successful Bars in Yellow and failed Bars in Black and the last Nine numbers on the script title line represent the Binary option Statistics in order: %ITM rate Total orders Successful Orders Failed Orders Total candles tested Candles per Day Trades per Day Max Consecutive Wins Max Consecutive Losses You can start the Binary Option statistics from a specific Date, which is handy for checking more recent history. HINTS: BINARY OPTIONS trading: use 5min, 15m, 1hr or even Daily charts. Trade after the price touches one of the Breakout lines and the Arrow first appears. Wait for the price to come back from Break Line by 1 or 2 pips, the alert arrow must stay on and candle change to black, then take Binary trade expiry End of Candle. If price pull back and arrow turns off, don't trade this candle, move on you probably don't have momentum, there will be plenty of other trigger events. The backtesting results are good with ITM rates 65% to 72% on many currency pairs, commodities and indices. Realtime trading has confirmed the backtesting results and they could even be bettered, provided you are selective on which signals to trade (strong MACD support etc), that you are patient and disciplined to this trading method. FOREX trading: the default settings should work with scalping. For longer term trades try with settings change to a more standard MACD filter or slower to catch the longer term momentum swings and the idea would be to trade the first Break Line alert that occurs after a decent Pullback in the direction of the trend. Setting the SL to just above/below the Pivot High/Low and set target to two or three times SL. References: "Fundamentals of Price Action Trading for Forex, Stocks, Options and Futures" video: www.youtube.com Other videos by "basecamptrading" on Naked Trading. "Taking Profits in Today's Market by Daryl Guppy" video: www.youtube.com
Pine Script® Indikator
von JustUncleL
23
Universal Longs Vs. Shorts - Ratio (Any Symbol)Hello again all my Trading View friends! This script is a variation of my other script "Universal Longs Vs. Shorts - Percentage (Any Symbol)" It allows you to choose ANY symbol and plot the ratio against ANY other symbol, as an indicator on your given pair. It is primarily used as an indicator of longs/shorts as well as shorts/longs as a ratio to each other. For example, you could plot BITFINEX:BTCUSDLONGS against BITFINEX:BTCUSDSHORTS. It plots the ratio of longs/shorts or shorts/longs. For example: If there are more longs than shorts open, the long ratio will be great than 1 with no upper limit. If there are less longs than shorts open, the ratio will be less than 1 but greater than 0. The same is true when comparing shorts to longs. You can choose to view Longs Ratio only, Shorts Ratio only, or Both. This is useful to see how many more longs there are than shorts, and visa versa, at any given time interval. It does not take into consideration total volume of longs + shorts to get an absolute number, but rather a relative ratio to each other. If there are many more positions open in one direction over the other, the ratio will rise higher and higher away from 1, which lets you know generally that there is a lot greater volume of that position open compared to its reverse. If you found this script helpful please remember to FOLLOW and press LIKE!! More useful scripts to come :-D
Pine Script® Indikator
von CryptoGraffer
6
Universal Longs Vs. Shorts - Percentage (Any Symbol)Hello all my Trading View friends!! This script allows you to choose ANY symbol and plot the ratio against ANY other symbol, as an indicator on your given pair. It is primarily used as an indicator of longs/shorts as well as shorts/longs as a percentage of total longs + shorts. For example, you could plot BITFINEX:BTCUSDLONGS against BITFINEX:BTCUSDSHORTS. It takes the ratio from an absolute 100%, rather than relative to each other. Therefore, each plot has a minimum of 0% and a maximum of 100%. You can choose to view Longs Percentage only, Shorts Percentage only, or Both. This is useful to see what percentage of total positions are either long or short at any given time interval. If you found this script helpful please remember to FOLLOW and press LIKE!!
Pine Script® Indikator
von CryptoGraffer
3
NG [Simple Harmonic Oscillator]The SHO is a bounded oscillator for the simple harmonic index that calculates the period of the market’s cycle. The oscillator is used for short and intermediate terms and moves within a range of -100 to 100 percent. The SHO has overbought and oversold levels at +40 and -40, respectively. At extreme periods, the oscillator may reach the levels of +60 and -60. The zero level demonstrates an equilibrium between the periods of bulls and bears. The SHO oscillates between +40 and -40. The crossover at those levels creates buy and sell signals. In an uptrend, the SHO fluctuates between 0 and +40 where the bulls are controlling the market. On the contrary, the SHO fluctuates between 0 and -40 during downtrends where the bears controlthe market. Reaching the extreme level -60 in an uptrend is a sign of weakness.
Pine Script® Indikator
von NGBaltic
2
Force Index with Buy on Dip strategyThis charts has 2 indicators 1 - Force Index This indicator is based on Dr Alexander Elder ForceIndex indicator with relate price to volume by multiplying net change and volume. - GREEN Bar indicates Bull is in control - RED Bar indicates Bear is in control. LENGTH of the bar indicate the strength of Bull or Bear. Normally there's potential BUY if the RED bar turned GREEN and SELL if GREEN to RED. 2 - Stochastic momentum Stochastic momentum is to detect potential Reversal where BLUE bar will appear if :- - Oversold - Stochastic less than 35 - Closing price is higher than last 2 High (Fast Turtle) // Note : Best use with "EMA Indicators with BUY sell Signal"
Pine Script® Indikator
von kgiap123
30
Hersheys Volume Pressure v1Hersheys Volume Pressure gives you very nice confirmation of trend starts and stops using volume and price. For up bars... If you have a large price range with low volume, that's very bullish. If you have a small price range with low volume, that's bullish. For down bars... If you have a large price range with low volume, that's very bearish. If you have a small price range with low volume, that's bearish. Look at the chart and you'll see how trends start and end with a PINCH and widen in the middle of the moves. Hersheys Volume Pressure is unique, in that it measures bull/bear pressure on each bar by itself. Other volume indicators like On Balnce Volume and Price Volume Trend use cumulative differences in the current and previous bar to show trends. You can set the moving average period, 14 is the default. Good trading! Brian Hershey
Pine Script® Indikator
von bnh
4
Murrey Math Extremes ComparatorHOW IT WORKS Creates two murrey math oscillators (hidden) one with 256 length another with 32 length and compare each other. WHAT GIVE ME THIS SCRIPT The script can give you very valuable information: - Main Trend - Pullbacks detections - Extreme overbought oversold prices alerts - Divergences - Any timeframe usage REFERENCES OF USAGE Main Trend Indications ****The main trend is indicated with green(bull) or red(bears) small "triangles" on the bottom(bull) or the top(bears) of the chart. *****To detect the Bull/Bear major trend the script use 256 murrey, if > 0 (green) we are uptrend in other cases we are downtrend Pullback detection ****The pullbacks are indicated with Green(bull) or red(bears) medium "Arrows" *****To detect pullbacks the system compare the long term murrey with the short term murrey, if long term is Green(green triangles) *****so we are in a main bull trend, if the short term murrey make an extreme low then the pullback is indicated *****The same for the short pullback, if long term murrey is RED and we have an extreme green short term murrey we shot a red arrow Extreme Overbught/Oversold ****The extreme OO is indicated with fancy diamonds *****To detect the Extremes price movements we combine the two murrey, if Long Term Murrey is overbought and short term murrey too *****Then the diamond show on the screen obove or below based on the extreme if overbought or oversold Strategy Resume: Triangles indicate Major Trend Up/Down Arrows Indicate Continuation pullbacks Diamonds Indicate Extreme Prices GUIDE HOW TO IMAGES How it's works Behind Scene
Pine Script® Indikator
von morpheus747
5
Indicators: Volume-Weighted MACD Histogram & Sentiment Zone OscVolume-Weighted MACD Histogram ------------------------------------------------------------------------------------- Volume-Weighted MACD Histogram, first discussed by Buff Dormeier, is a modified version of MACD study. It calculates volume-averaged Close price for finding the histogram. More info: www.moneyshow.com Sentiment Zone Oscillator ------------------------------------------------------------------------------------- Sentiment Zone Oscillator, developed by Walid Khalil, is a complementing oscillator to VZO and PZO. To quote Walid: >> The sentiment zone oscillator (SZO) is a leading contrary oscillator that measures the extreme emotions of a single market or share. >> It measures and defines both extremes, bullishness (overoptimism) and bearishness (overpessimism), that could lead to a change >> in sentiment, eventually changing the trend of the time frame under study. The SZO was devised on the belief that after several waves >> of rising prices, investors begin to get bullish on the stock with increasing confidence since the price has been rising for some time. >> The SZO measures that bullishness/bearishness and marks overbought/oversold levels. SZO has its own oversold/overbought bands. Also, when SZO goes above 7, it indicates extreme optimism. When the SZO goes below -7, it indicates extreme pessimism. More info: www.traders.com How to import / use custom indicators from this chart? ------------------------------------------------------------------------------------- PDF: drive.google.com
Pine Script® Indikator
von LazyBear
14
Every Hour 1st FVG vTDLEvery Hour 1st FVG vTDL For more information on how to trade FVG's, refer to Michael J. Huddleston aka The Inner Circle Trader as he is the guy who invented the concept after all. x.com www.youtube.com I'm just vibing plz dont take down my indicator pinescript people plz and thank you What It Shows: This indicator displays the first Fair Value Gap (FVG) that appears during each hourly session, based on lower timeframe price action. Core Concept: Fair Value Gap (FVG) Detection: Uses a 3-candle pattern to detect price gaps Key Features: 1. Hourly Time-Based Filtering: Divides the trading day into hourly blocks Shows ONLY the first FVG(s) that appear in each hour Resets tracking at the start of each new hour Uses America/New_York timezone 2. Two Display Modes: "First Only": Shows whichever FVG appears first per hour (bullish OR bearish) Once one box appears, no more boxes for that hour "Show Both": Shows first bullish AND first bearish FVG per hour Displays the first bull FVG + the first bear FVG independently 3. Multi-Timeframe Support: Lower Timeframe Selection: Choose 15-second, 1-minute, or 5-minute FVG detection Works on ANY chart timeframe: On 1-min chart: Uses direct candle data On higher timeframes (5-min, 15-min, hourly, etc.): Fetches lower timeframe data to detect gaps NOTE: YOU CAN NOT GO LOWER THAN THE TIME FRAME SELECTED FOR FVG IT WILL NOT WORK BECAUSE WE ARE REQUESTING DATA FROM A LOWER TIME FRAME, IF YOU ARE LOWER THAN THAT TIME FRAME YOU WILL GET: Error on bar 0: The chart's timeframe must be greater or equal to the timeframe used with `request.security_lower_tf()`. 4. Visual Display: Colored boxes mark the FVG zones: Blue (default) = Bullish FVG Red (default) = Bearish FVG Box positioning: Left edge: When the FVG formed Right edge: End of that hour (HH:59:59) Height: The actual gap size 5. Size Filtering: Minimum gap size setting (default: 4 ticks) Filters out tiny, insignificant gaps Trading Logic Behind It: The indicator helps identify the first imbalance of each hour by: Highlighting where price moved too fast, leaving imbalances Traders watch these zones for setups and entry models
Pine Script® Indikator
von Trades-Dont-Lie
Z-Fusion Oscillator | Lyro RSThe Z-Fusion Oscillator converts five momentum indicators into Z-scores and blends them into one normalized signal that adapts across markets. By combining normalization, smoothing, and divergence detection, users can easily identify when momentum is accelerating, weakening, reversing, or entering extreme zones 🔶 USAGE The Z-Fusion Oscillator is designed to give traders a unified reading of market momentum—removing the noise of comparing tools that normally run on different scales. By transforming RSI, MACD histogram, Stochastic, Momentum, and Rate of Change into Z-scores, this tool standardizes all inputs, making trend strength and shifts easier to interpret. A dual-line system (fast Z-fusion line + slower baseline) highlights turning points, while overbought/oversold bands and “X-marks” help traders spot exhaustion and potential reversals. 🔹 Unified Momentum Structure The indicator’s core strength comes from combining five Z-scored signals into one average. Which makes momentum behavior more consistent across assets, reduces false extremes, and highlights true shifts in trend conviction. 🔹 Divergence Detection The tool includes fully integrated divergence detection: Regular Bullish Divergence: Price makes a lower low while Z-Fusion forms a higher low. Regular Bearish Divergence: Price makes a higher high while Z-Fusion forms a lower high Bullish and bearish divergences are marked directly on the oscillator with labels and colored pivot connections, making hidden momentum shifts obvious. 🔹 Visual Extremes Two sets of upper and lower Z-score thresholds help identify: Extreme overbought surges Extreme oversold drops Reversal zones Potential exhaustion conditions Background coloring reinforces when the oscillator moves beyond major levels, helping traders quickly assess momentum pressure. 🔹 Detecting Momentum Anomalies Z-scores allow the oscillator to highlight when market momentum behaves abnormally relative to its own recent history. For example: The oscillator reaching +1 or –1 after an extended trend may indicate a climax. A sharp Z-score reversal within an extreme zone can signal a trend exhaustion or a corrective move. Divergences often appear earlier due to normalization smoothing out indicator noise. This makes the Z-Fusion Oscillator particularly useful for spotting subtle shifts in trend direction that traditional indicators may miss. 🔶 DETAILS 🔹 Composite Z-Score Framework Each momentum tool is smoothed, normalized, and transformed: RSI → EMA-smoothed, Z-scored MACD histogram → Z-scored Stochastic → EMA + SMA smoothing, then Z-scored Momentum → EMA-smoothed, Z-scored Rate of Change → EMA-smoothed, Z-scored These are averaged into one composite Z-score to provide a consistent reading across assets and market conditions. 🔹 Fusion Trend Lines Two lines serve as the core signal: Fast Line (savg) – reacts quicker to trend changes Slow Line (savg2) – acts as a baseline filter Crossovers between these lines highlight momentum shifts, while their color reflects trend bias. 🔹 Overbought/Oversold Zones Two upper and two lower Z-score thresholds define “zones”: Upper zones highlight overheated momentum or potential bearish reversals Lower zones highlight depressed momentum or potential bullish reversals Filled regions and background colors help visually confirm extreme conditions. 🔹 Pivot-Based Divergence Engine The script includes filtered pivot detection with customizable look-backs and range limits to ensure divergences are meaningful, not noise-driven. 🔶 SETTINGS 🔹 Indicator Settings Source — Price series used for all calculations. Z-Score Length — Lookback period for Z-score normalization. Z-Score MA Length — Smoothing length for the fusion signal lines. Overbought/Oversold Levels — Four customizable threshold lines. Color Palette — Choose from preset themes or define custom colors. 🔹 RSI Length — RSI calculation period. EMA Smoothing Length — Smooths RSI before Z-score conversion. 🔹 MACD Fast Length — Fast EMA length. Slow Length — Slow EMA length. Signal Line Length — MACD signal smoothing. 🔹 Stochastic %K Length — Main stochastic length. EMA Smoothing — Smooths %K for stability. %D Length — Smoothing for the signal line. 🔹 Momentum Length — Momentum lookback. EMA Smoothing — Smooths momentum before Z-scoring. 🔹 Rate of Change Length — ROC lookback. EMA Smoothing — Smooths ROC values. 🔹 Divergence Enable/Disable Divergence Detection — Toggle divergence engine. Pivot Left/Right Lookback — Defines pivot detection sensitivity. Detection Range Limits — Controls allowable range for divergence. Bull/Bear Colors & Styling — Customize divergence visualization. 🔶 SUMMARY The Z-Fusion Oscillator combines multiple momentum signatures into a single normalized signal, enabling traders to: Identify reversals early Detect momentum exhaustion Spot bullish and bearish divergences Track overbought/oversold conditions Visualize trend strength with clarity Whether you're a swing trader, intraday analyst, or trend-reversal hunter, the Z-Fusion Oscillator provides a powerful and adaptive way to read momentum.
Pine Script® Indikator
von LyroRS
Momentum Tide [Alpha Extract]A sophisticated momentum-based trend identification system that measures normalized price deviation from an EMA baseline using ATR scaling and hyperbolic tangent smoothing for precise trend state classification. Utilizing advanced signal processing with configurable neutral bands and slope sensitivity adjustments, this indicator delivers institutional-grade momentum analysis with continuous strength measurement and visual trend confirmation. The system's three-state classification (bullish, bearish, neutral) combined with dynamic color intensity scaling provides comprehensive market momentum assessment across varying volatility conditions. 🔶 Advanced Baseline Deviation Framework Implements EMA-based baseline calculation with ATR-normalized deviation measurement to create volatility-adjusted momentum signals. The system calculates raw price deviation from the baseline, scales by ATR and slope sensitivity factor, then applies exponential smoothing for stable signal generation with reduced noise and false transitions. // Core Momentum Calculation Baseline = ta.ema(close, Baseline_Length) ATR_Value = ta.atr(ATR_Length) Raw_Deviation = (close - Baseline) / (ATR_Value * Slope_Scaler) Signal = ta.ema(Raw_Deviation, Signal_Smoothing) 🔶 Hyperbolic Tangent Normalization Engine Features sophisticated tanh transformation that clamps raw deviation signals into normalized -1 to +1 range for consistent interpretation across all market conditions. The system applies safe exponential calculations with value capping to prevent overflow while maintaining signal sensitivity, creating bounded momentum readings suitable for systematic threshold analysis. // Tanh Normalization Clamped_Signal = tanh(Signal) // Bounded to Strength = abs(Clamped_Signal) // Momentum intensity 🔶 Three-State Classification System Implements intelligent trend state determination using configurable neutral band thresholds to reduce whipsaw signals during ranging conditions. The system classifies market as bullish (+1) when momentum exceeds upper neutral band, bearish (-1) below lower neutral band, and neutral (0) within the band, providing clear directional bias with built-in consolidation recognition. 🔶 Dynamic Color Intensity Architecture Provides advanced visual feedback through momentum strength-based color intensity modulation, where stronger trends display more opaque colors and weaker trends show increased transparency. The system dynamically adjusts color alpha values based on absolute momentum strength, creating intuitive visual representation of trend conviction across baseline, candles, and bars. 🔶 Trend Strength Meter Visualization Features innovative horizontal gradient meter displaying real-time momentum position across bear-to-bull spectrum with 24-segment resolution. The system creates smooth color transitions from bearish red through neutral gray to bullish green, with arrow indicator showing precise momentum location for instant trend strength assessment without cluttering the price chart. 🔶 Intelligent Flip Detection System Generates transition markers when trend state changes from neutral/bearish to bullish or neutral/bullish to bearish, with duplicate signal suppression to prevent marker clustering. The system tracks previous signal states and only plots new markers on genuine trend reversals, providing clean entry signal visualization for systematic trading approaches. snapshot 🔶 Configurable Neutral Band Framework Implements adjustable neutral zone width using ATR percentage parameters to optimize signal frequency for different trading styles and market conditions. Wider bands reduce flip frequency for position trading while tighter bands increase sensitivity for active trading strategies, enabling customization without code modification. 🔶 Slope Sensitivity Adjustment Features slope scaler parameter that modulates ATR normalization factor, controlling signal smoothness versus responsiveness trade-off. Higher values create smoother momentum readings with fewer transitions while lower values increase snappiness for faster reaction to price changes, allowing optimization across different volatility regimes and timeframes. 🔶 Comprehensive Visual Integration Provides multi-dimensional trend visualization through color-coded baseline overlay, momentum-synchronized candle coloring, and bar color modification with configurable display toggles. The system includes optional flip markers and strength meter with position control for complete chart integration without visual overload. 🔶 Performance Optimization Framework Utilizes efficient calculation methods with optimized table management for strength meter updates and minimal computational overhead for real-time momentum processing. The system includes intelligent state tracking and safe mathematical operations to prevent errors during extreme market conditions while maintaining consistent performance. 🔶 Why Choose Momentum Tide ? This indicator delivers sophisticated momentum-based trend analysis through normalized deviation measurement and intelligent three-state classification. Unlike traditional momentum oscillators that operate in separate windows, Momentum Tide integrates directly with price action through baseline overlay and candle coloring while providing the analytical depth of bounded momentum measurement. The system's combination of tanh normalization, configurable neutral bands, dynamic color intensity, and innovative strength meter makes it essential for traders seeking adaptive trend-following approaches with clear visual feedback across cryptocurrency, forex, and equity markets. The three-state system naturally filters ranging periods while the momentum strength measurement enables position sizing and confidence assessment for systematic trading strategies.
Pine Script® Indikator
von AlphaExtract
1
RSI Hybrid + EMA Cloud + Swings(15m/2H)RSI Hybrid + EMA Cloud (15m Trend + 2H Momentum) A dual-timeframe trading system combining fast 15-minute trend structure with higher-timeframe 2-Hour momentum, volume and structural levels. 🧩 What This Indicator Does This tool blends: 🔹 15m Trend (EMA Cloud) – 2 Points EMA 7 vs 21 → Short trend EMA 30 vs 74 → Long trend Cloud shading highlights bullish/bearish alignment Faster, intraday trend sensitivity 🔹 2H Momentum (RSI Hybrid) – 3 Points RSI > 50 RSI > SMA(4) RSI > SMA(12) Gives short / medium / long momentum confirmation from the higher timeframe. 🔹 2H Volume Pressure – 1 Point Volume vs 20-SMA Mild / Moderate / Strong Bull/Bear Confirms true participation behind price moves ⭐ Score System (0–6 Total) Component Points 15m EMA Trend 2 2H RSI Hybrid 3 2H Volume Power 1 Total 6 Interpretation: 5–6 → High-confluence direction 3–4 → Partial confluence 1–2 → Weak bias 0 → No reliable direction Designed for discretionary and semi-systematic intraday traders. 📊 15m Structural Levels Includes: ✔ Last confirmed 15m Swing High / Swing Low Based on close-price pivots, not highs/lows. ✔ Live Running High since last Swing LOW Tracks how far price has extended upward. ✔ Live Running Low since last Swing HIGH Tracks downward extension after a swing high. ✔ ATR(15m) Volatility reference for SL/TP or risk modeling. These levels help in timing entries, managing stops, and identifying breakout/breakdown zones. 🖥 On-Chart Info Table Summarizes: 15m EMA short & long trend 2H RSI short/medium/long momentum RSI vs 50 2H volume power Bull & Bear score (with breakdown) Last 15m swing highs/lows ATR(15m) Color-coded for clarity 💡 Why Use This Indicator High-speed 15m trend detection Higher-TF 2H momentum & volume confirmation Multi-layered bias presented in a simple score Built-in structure for more intelligent entries/exits Works on indices, stocks, FX, crypto Ideal for intraday traders who want speed + reliability
Pine Script® Indikator
von phantomscharts