Auf geht's

In den Scripts nach "Volume" suchen

[blackcat] L1 Volume DynamicsLevel: 1 Background Use the difference of Jurik MA and SMA equivalent (ALMA) to observe something new for volume. Function Trading volume is an important technical indicator that is not easy to see the law. I try to match the trading volume with the deduction theory, and the deduction double-average theory is matched with the measurement capacity. I will compare the two moving averages of ultra-short-term, short-term, medium-term and long-term. The faster moving average I choose is Jurik MA (JMA), because it is faster than EMA under the same parameters, and the smoothing effect is very good. In addition to the slow moving average, I use ALMA to benchmark SMA. Because the smoothing properties of ALMA are better. A law is used here, that is, the equivalent relationship between ALMA and SMA is approximately a Fibonacci sequence. I can dynamically apply this amount to the Bitcoin market and see some interesting phenomena. What is double average volume? According to normal circumstances, JMA will follow the transaction volume faster than SMA. The transaction volume is normally rising above the double average volume, and the transaction volume is normally falling below the double average volume. When the SMA follows the trading volume faster than the JMA, it is abnormal (usually occurs in the divergence segment), that is, the JMA is above the SMA, but the trading volume is below the SMA (the bottom divergence volume pile), the top divergence volume pile is the opposite process. The trading volume is between the double average volume, which is the finishing volume energy. It can be used in the breakthrough of the box and the bottom of the pot. By comparing the strength of the current trading volume with the strength of the trading volume on the upper edge of the box or bottom structure, it can improve the success rate of predicting the breakthrough, especially for the observation effect of large funds latent. Remarks Feedbacks are appreciated.
Pine Script® Indikator
von blackcat1402
4
Market sessions and Volume profile - By LeviathanThis script allows you to keep track of Forex market sessions (Tokyo, London and New York), as well as Daily, Weekly and Monthly sessions. All of them are accompanied by Volume Profile options where you can view VP Histogram, Point of Control, Value Area High and Value Area Low. Colors, lines and other design preferences are fully customizable. * Volume Profile of shorter sessions (eg. Tokyo, London, New York) works better when using lower timeframes such as 15min, 5min, etc. ** Use timeframe higher than 15min when viewing Monthly sessions Indicator settings overview: SESSION TYPE - Tokyo session (1:00 - 9:00 UTC/ GMT ) - London session (7:00 - 16:00 UTC/ GMT ) - New York session (13:00 - 22:00 UTC/ GMT ) - Daily session - Weekly session - Monthly session DISPLAY - Show Volume Profile (Show or hide Volume Profile histogram) - Show POC (Show or hide Point Of Control line) - Show VAL (Show or hide Value Area Low line) - Show VAH (Show or hide Value Area High line) - Show Live Zone (Show or hide the ongoing session) VOLUME PROFILE SETTINGS - Resolution (The higher the value, the more refined of a profile, but less profiles are shown on the chart) - Smooth Volume Data (Useful for assets that have very large spikes in volume over large bars, helps create better profiles) APPEARANCE - Up Volume color (Pick a custom color for up/ bullish volume profile nodes) - Down Volume color (Pick a custom color for down/ bearish volume profile nodes) - POC color and thickness (Pick a custom color and thickness for Point Of Control line) - VAH color and thickness (Pick a custom color and thickness for Value Area High line) - VAL color and thickness (Pick a custom color and thickness for Value Area Low line) - Session box thickness (Pick a custom thickness for the session box. Color is provided automatically with optimal contrast) ** Some VP elements are inspired by @LonesomeTheBlue's volume profile script
Pine Script® Indikator
von LeviathanCapital
124
Volume 15m vs 1m*Up/Down Volume Indicator This indicator plots the 15m volume (black line) on the 1m chart alongside the sum of 1m volume for 15m (blue line). This indicator allows us to see the raw data that will generate the 15m volume before it occurs. Next it seperates up period volume (green line) from down period volume (red line) so that we can see how much of each was responsible for the total volume. The black line will dance for 15m at a time but if the blue line rises above the locked in section of the black line (to the left), then the next 15m volume will be higher than the last. Also, if the green line is higher than the red, we know that up volume is driving of the increase. *Volume Sum Indicator This indicator allows us to track the volume trend even when volume is near zero. This indicators sums the 15m volume for 13 periods to represent 200 minutes worth of volume. Then it plots the sum of 1m up volume for 200 periods and the 1m down volume for 200 periods. When green is over red, the volume is trending up. Blue is the total 1m volume for 200 periods. It should act as a resistance line since it is unusual for 100% of volume to be up volume or down volume. This indicator only works on the 1m chart. The higher timeframe must be set to 15m. If anyone knows how to make this indicator work on any timeframe that would be great!
Pine Script® Indikator
von WhiteWaterRambler
3
High volume zone█ OVERVIEW Show high volume zone in a lower timeframe. █ CONCEPTS 1- Choose an amount of volume (1 000 by default) 2- Choose a timeframe (1 minute by default) 3- It highlight every zone where volume was > 1000 in less than one minute █ OTHER SECTIONS Limitation: - Unfortunately, I didn't find a way to make it in a lower timeframe than 1 minute with Pinescript - It is truncate by minute so a high volume between two lower tf candles may not be count If you have a solution for these, glad to hear it.
Pine Script® Indikator
von remilhoste
3
Volume OximeterOVERVIEW The Volume Oximeter (VOXI) is a technical indicator that gauges the amount of volume currently present in the market, relative to the historical volume that was present before. The purpose of this indicator is to filter out with-trend signals during ranging/non-trending conditions. CONCEPTS This indicator assumes that trends are more likely to start during periods of high volume, compared to during periods of low volume. This is because high volume indicates that there are bigger players currently in the market, which is necessary to begin a sustained trending move. So, to determine whether the current volume is "high", it is compared to an average volume for however number of candles back the user specifies. If the current volume is greater than the average volume, it is reasonable to assume we are in a high volume period. Thus, this is the ideal time to enter a trending trade due to the assumption that trends are more likely to start during these high volume periods. The default values in the indicator are designed for use on the daily chart but can be applied to any timeframe. The default volume lookback period is 259 since there are usually 259 daily candles in a year on Forex daily charts. This means that the average volume will represent the average volume over the past year. This would be 365 on Crypto daily charts, since the Crypto is open 24/7 instead of 24/5). This is what the current volume will be compared to. The default smoothing lookback period is 10, but this can be adjusted depending on the indicator that's giving you your with-trend signals. After my backtesting, 10 was the best value for my with-trend indicator, so you should do your own testing to see which value works best with your with-trend indicator. HOW DO I READ THIS INDICATOR? If the VOXI line is above or equal to zero (indicated by the blue color), the current volume is greater than the historical average volume. This is a good time to take with-trend signals since high volume is necessary for sustained trending moves to begin. If the VOXI line is below zero (indicated by the red color), the current volume is less than the historical average volume. This is a good time to ignore with-trend signals since an absence of volume indicates that there aren't big market participants to participate in a new trending move.
Pine Script® Indikator
von bjr117
Volume Filtered *All Candlestick Patterns* [KT] Hello! This script uses TradingView's *All Candlestick Patterns* indicator and includes a volume filter. The frequency of each candlestick pattern is recorded in addition to the subsequent session's outcome - higher or lower close. The requisite volume for the pattern is configurable; formations will not be distinguished when volume is less than the defined lower threshold. For example, setting the volume threshold to 10% forces the script to identify candlestick patterns in which volume for the session (candle) is 10% greater than the volume moving average. All candlestick patterns with volume less than (1.10 * volume MA) are discounted. The script counts the frequency of each pattern - the number of times the pattern occurred - in addition to the next candle's outcome. Pertinent statistics are displayed in the table, which can be hidden. I plan on working on the script quite a bit more; please comment a suggestion if you have one! What else should be included?
Pine Script® Indikator
von KioseffTrading
19
Volumetric colored candles with matching pivot point linesCandles are split into 10 categories based on their volume, and can be changed in the options. By default and in the images, white is very high volume, reds are high volume, yellows are medium volume, greens are low and dark-grey is very low. Adjustments for scale are included in the options. The Magnitude option is a 10x multiplier, so 1=10, 2=100, 3=1000, etc., up to 9. There is also a Multiplier selection option where 1=1, 2=2, 3=3, 4=4, etc. To attenuate for a given chart, these multipliers will need to be changed. In general, all white means you need to increase the Magnitude and all dark-grey means you need to decrease the magnitude. Somewhere between those two, the Multiplier can be used for further calibration. All this color coating is relational, like a spectrum. As you adjust you will see them maintaining their proportions as the candles switch color (ex. green become yellow while yellow becomes red). I have also included pivot lines that follow the same logic for color coding. Two options exist for adjusting the pivot high and pivot low points respectively. They do not always correspond to the exact color of the candle producing them, but they should be a rough average (ie. red and green bars making yellow lines). They make for good indicators of how much liquidity may be at a certain support/resistance level. The lines can also be turned off altogether. If your candles aren't looking right, go to settings of both regular candles and heikin-ashi, and uncheck both border and wick. I still have some code to clean up and I plan on expanding upon this study. If you like my work consider tipping!
Pine Script® Indikator
von mellowmichellehe
14
Simple Volume Oscillator (SVO), by @BlueJayBirdSimple Volume Oscillator, or SVO. I came up with this idea while studying Spread Volume Analysis (SVA). It uses the Trading View's built-in RSI function to simplify volume values for further interpretation. // -------------------- ENGLISH, Inglés How to Use: - When there's little volume activity, expect the oscillator to be closer to the zero line. - Wait for a probable sudden increment up to close 100 when volume enters into the market. - It works pretty much as a volatility oscillator, but it eliminates the noise of the price, and the noise of the volume bars, always so vertical and linear, which sometimes are hard to understand at first glance. - As any oscillator, it suffers from some lagging when compared to the price action, but for the most part is pretty accurate. - Remember the cyclical nature of markets: If things are quite, something is coming. - NOTE: The oscillator WILL NOT indicate market direction, that bias is up to the analyst to find out. - Like. Follow. Comment. // -------------------- SPANISH, Español Cómo usar: - Cuando hay poca actividad de volumen, el oscilador debería estar cercano a cero. - Esperá por un posible incremento repentino hasta 100 cuando entre volumen en el mercado. - Funciona de manera similar a un oscilador de volatilidad, pero elimina cualquier ruido del precio, y el ruido de las barras de volumen, siempre tan verticales y lineales, lo que las hace difícil de descifrar a simple vista. - Como cualquier oscilador, sufre de un ligero retraso respecto de la acción del precio, pero por lo demás, es bastante preciso. - Recordá la naturaleza cíclica de los mercados: Si las cosas están quietas, es porque algo está por suceder. - NOTA: Este oscilador NO VA A decirte qué dirección va a seguir el precio; eso es algo que vas a tener que descubrir por tu cuenta. - Like, seguí, comentá.
Pine Script® Indikator
von BlueJayBird
6
Up/Down Volume RatioUp/Down Volume Ratio is calculated by summing volume on days when it closes up and divide that total by the volume on days when the stock closed down. High volume up days are typically a sign of accumulation(buying) by big players, while down days are signs of distribution(selling) by big market players. The Up Down volume ratio takes this assumption and turns it into a tangible number that's easier for the trader to understand. My formula is calculated using the past 50 periods, be warned it will not display a value for stocks with under 50 periods of trading history. This indicator is great for identify accumulation of growth stocks early on in their moves, most of the time you would like a growth stocks U/D value to be above 2, showing institutional sponsorship of a stock. Up/Down Volume value interpretation: U/D < 1 -> Bearish outlook, as sellers are in control U/D = 1 -> Sellers and Buyers are equal U/D > 1 -> Bullish outlook, as buyers are in control U/D > 2 -> Bullish outlook, significant accumulation underway by market makers U/D >= 3 -> MONSTER STOCK ALERT, market makers can not get enough of this stock and are ravenous to buy more U/D values greater than 2 are rare and typically do not last very long, and U/D >= 3 are extremely rare one example I kind find of a stock's U/D peaking above 3 was Google back in 2005. MAKE SURE TO HIT THE SETTINGS WHEEL AND CHECK THE BOX NEXT TO PLOT IN ORDER TO GET RID OF THE PLOTTED LINE.
Pine Script® Indikator
von monkaOMEGA
6
Open-source Buy and Sell VolumeVersión open source de scripts anteriores / Open source version of previous scripts Confío en que esta vez no esté violando ninguna de las reglas... A pesar de que el volumen simplemente son operaciones que se realizan en un determinado espacio de tiempo, este indicador intenta separar dentro de una vela el volumen de compra y de venta. Una vez separado el volumen de cada vela el indicador se calcula en base a la media simple (larga) menos la media exponencial (corta) Los puntos azules indican posibles zonas de soporte o resistencia. ---------------------------------------------------------- Although the volume is simply operations carried out in a certain period of time, this indicator tries to separate the long and short volume into a candle. Once the volume of each candle is separated, the indicator is calculated based on the simple average (long length) minus the exponential average (short length) The blue dots indicate possible areas of support or resistance.
Pine Script® Indikator
von oarnal
Day's Buy Sell Volume label This indicator looks simple but it was bit tricky to code and to make it work on all time frames . I have used array in this to showcase the use of array, array give you more flexibly. It works on all time frame 1m 2m 3m 5m 10m 15m 30m 60m 120m. When the time frame is greater than the or equal to "D" it will show the current bar volume only. Total volume is made up of buying volume and selling volume. Buying volume is the number of shares, contracts, or lots that were associated with buying trades, and selling volume is the number that were associated with selling trades. This indicator shows two labels green one is showing the buying volume of the current day and the red label is showing the selling volume of the current day. I am making this code available to all. This code is for Total volume is made up of buying volume and selling volume. Buying volume is the number of shares, contracts, or lots that were associated with buying trades, and selling volume is the number that were associated with selling trades. //thanks to @Doc6272 who asked to make this indicator Label
Pine Script® Indikator
von TJalam
95
Attributable VolumeA volume indicator which calculates "Attributable Volume”, the portion of volume which contributed to the direction in which the candle moved. Attributable Volume is calculated as: Total volume excluding the "counter wick" volume. Where for a green (up) candle, the "counter wick" volume is the top wick volume. In theory, Attributable Volume should better represent the effort of directional thrust of each candle. By default, this indicator displays “Attributable RVOL”, but can be set to: Attributable RVOL RVOL Attributable Volume Volume Note: RVOL = Relative Volume, the current volume divided by the Volume moving average. RVOL can be used to identify major moves, and potential starts/ends to trends.
Pine Script® Indikator
von capriole_charles
11
Relative Volume RVOL AlertsRelative Volume or RVOL is an indicator used to help determine the amount of volume change over a given period of time. It is often used to help traders determine how in-play a ticker is. General rule of thumb is the higher the RVOL, the more in play a stock is. I myself like to use it as a substitute of the volume indicator itself. Basic Calculation: Relative Volume = Current Volume / Average Volume Crossover Signals: Any time there is a volume spike which causes a crossover of the user set 'Smoothed Moving Average' or 'Threshold' a green/red dot will appear at the top. The color of the dot is dependent on closing of the candle. Therefore it does not necessarily mean price will continue in that direction since volume spikes often happen in peaks or valleys. Threshold: The level at which custom alerts and signal can be set. The higher the value, the more volume required to trigger. Built in Alerts: You can set custom alerts for the crossovers of the adjustable threshold, or the average RVOL band.
Pine Script® Indikator
von oh92
36
Ord Volume [LucF]Tim Ord came up with the Ord Volume concept. The idea is similar to Weis Wave , except that where Weis Wave keeps a cumulative tab of each wave’s successive volume columns, Ord Volume tracks the wave's average volume . Features You can choose to distinguish the area’s colors when the average is rising/falling (default). You can show an EMA of the wave averages, which is different than an EMA on raw volume. You can show (default) the last wave’s ending average over the current wave, to help in comparing relative levels. You can change the length of the trend that needs to be broken for a new wave to start, as well as the price used in trend detection. Use Cases As with Weis Wave, what I look at first are three characteristics of the waves: their length, height and slope. I then compare those to the corresponding price movements, looking for discrepancies. For example, consecutive bearish waves of equal strength associated with lesser and lesser price movements are often a good indication of an impeding reversal. Because Ord Volume uses average rather than cumulative volume, I find it is often easier to distinguish what is going on during waves, especially exhaustion at the end of waves. Tim Ord has a method for entries and exits where he uses Ord Volume in conjunction with tests of support and resistance levels. Here are two articles published in 2004 where Ord explains his technique: pr.b5z.net n.b5z.net Note Being dependent on volume information as it is currently available in Pine, which does not include a practical way to retrieve delta volume information, the indicator suffers the same lack of precision as most other Pine-built volume indicators. For those not aware of the issue, the problem is that there is no way to distinguish the buying and selling volume (delta volume) in a bar, other than by looping through inside intervals using the security() function, which for me makes performance unsustainable in day to day use, while only providing an approximation of delta volume.
Pine Script® Indikator
von LucF
7
Accumulation/Distribution Volume (ADV) [cI8DH]This is the simplified and optimized version of my original ADV indicator. It shows both regular volume bars and the accumulated/distributed (A/D) portion of them. The equation is elegant and intuitive. It calculates candle body to candle height ratio and multiplies it by volume: volume*(close-open)/(high-low). This is the building block of my three other indicators, ADL, ADP and ADMF. - The volume bars has two shades of green and red. The dark shade shows amount of A/D and the light shade shows total volume (what you see on a regular volume indicator). When money volume is enabled, volume is multiplied by price. As you can see in the chart below, trade volume in terms of USD was growing over the past years. - Blue line is the moving average of A/D and the orange line is for total volume. When "Baseline Chart" option is enabled, this moving average is identical to ADMF indicator which can be a powerful indicator for assessing buy/sell pressure as well as money flow and volume divergences. You can turn off volume bars (from style menu) for better visibility or you can use the below indicators. Please note that ADMF is now available as a part of ADP indicator as well and I recommend using the latter since ADP can also replace CMF and MFI indicators. - If you change the aggregation to cumulative (while having money volume disabled), the gray line becomes identical to On Balance Volume (OBV) and the blue line identical to my ADL indicator. The latter I would argue is more accurate than Chaikin's ADL, William's A/D and OBV.
Pine Script® Indikator
von cI8DH
25