Auf geht's

Range

Range Lattice## RangeLattice RangeLattice constructs a higher-timeframe scaffolding on any intraday chart, locking in structural highs/lows, mid/quarter grids, VWAP confluence, and live acceptance/break analytics. It provides a non-repainting overlay that turns range management into a disciplined process. HOW IT WORKS Structure Harvesting – Using request.security() , the script samples highs/lows from a user-selected timeframe (default 240 minutes) over a configurable lookback to establish the dominant range. Grid Construction – Midpoint and quarter levels are derived mathematically, mirroring how institutional traders map distribution/accumulation zones. Acceptance Detection – Consecutive closes inside the range flip an acceptance flag and darken the cloud, signaling balanced auction conditions. Break Confirmation – Multi-bar closes outside the structure raise break labels and alerts, filtering the countless fake-outs that plague breakout traders. VWAP Fan Overlay – Session VWAP plus ATR-based bands provide a live measure of flow centering relative to the lattice. HOW TO USE IT Range Plays : Fade taps of the outer rails only when acceptance is active and VWAP sits inside the grid—this is where mean-reversion works best. Breakout Plays : Wait for confirmed break labels before entering expansion trades; the dashboard's Width/ATR metric tells you if the expansion has enough fuel. Market Prep : Carry the same lattice from pre-market into regular trading hours by keeping the structure timeframe fixed; alerts keep you notified even when managing multiple tickers. VISUAL FEATURES Range Tap and Mid Pivot markers provide a tape-reading breadcrumb trail for journaling. Cloud fill opacity tightens when acceptance persists, visually signaling balance compressions ready to break. Dashboard displays absolute width, ATR-normalized width, and current state (Balanced vs Transitional) so you can glance across charts quickly. Acceptance Flag toggle: Keep the repeated acceptance squares hidden until you need to audit balance. PARAMETERS Structure Timeframe (default: 240): Choose the timeframe whose ranges matter most (4H for indices, Daily for stocks). Structure Lookback (default: 60): Bars sampled on the structure timeframe. Acceptance Bars (default: 8): How many consecutive bars inside the range confirm balance. Break Confirmation Bars (default: 3): Bars required outside the range to validate a breakout. ATR Reference (default: 14): ATR period for width normalization. Show Midpoint Grid (default: enabled): Display the midpoint and quarter levels. Show Adaptive VWAP Fan (default: enabled): Toggle the VWAP channel for assets where volume distribution matters most. Show Acceptance Flags (default: disabled): Turn the acceptance markers on/off for maximum visual control. Show Range Dashboard (default: enabled): Disable if screen space is limited, re-enable during prep sessions. ALERTS The indicator includes five alert conditions: Range High Tap: Price interacted with the RangeLattice high Range Low Tap: Price interacted with the RangeLattice low Range Mid Tap: Price interacted with the RangeLattice mid Range Break Up: Confirmed upside breakout Range Break Down: Confirmed downside breakout Where it works best This indicator works best on liquid instruments with clear structural levels. On very low timeframes (1-minute and below), the structure may update too frequently to be useful. The acceptance/break confirmation system requires patience—faster traders may find the multi-bar confirmation too slow for scalping. The VWAP fan is session-based and resets daily, which may not suit all trading styles.
Pine Script® Indikator
von officialjackofalltrades
FluxPulse Beacon## FluxPulse Beacon FluxPulse Beacon applies a microstructure lens to every bar, combining directional thrust, realized volatility, and multi-timeframe liquidity checks to decide whether the tape is being pushed by real sponsorship or just noise. The oscillator's color-coded columns and adaptive burst thresholds transform complex flow dynamics into a single actionable flux score for futures and equities traders. HOW IT WORKS Momentum Extraction – Price differentials over a configurable pulse distance are smoothed using exponential moving averages to isolate directional thrust without reacting to single prints. Volatility + Liquidity Normalization – The momentum stream is divided by realized volatility and multiplied by both local and higher-timeframe EMA volume ratios, ensuring pulses only appear when volatility and liquidity align. Adaptive Thresholding – A volatility-derived standard deviation of flux is blended with the base threshold so bursts scale automatically between low-volatility and high-volatility market conditions. Divergence Engine – Linear regression slopes compare price vs. flux to tag bullish/bearish divergences, highlighting stealth accumulation or distribution zones. HOW TO USE IT Continuation Entries : Go with the trend when histogram bars stay above the adaptive threshold, the signal line confirms, and trend bias agrees—this is where liquidity-backed follow-through lives. Fade Plays : Watch for divergence alerts and shrinking compression values; when flux prints below zero yet price grinds higher, hidden selling pressure often precedes rollovers. Session Filter : Compression percentage in the diagnostics table instantly tells you whether to trade thin overnight sessions—low compression means stand down. VISUAL FEATURES Dynamic background heat maps flux magnitude, while threshold lines provide a quick read on whether a pulse is statistically significant. Diagnostics table displays live flux, signal, adaptive threshold, and compression for quick reference. Alert-first workflow: The surface is intentionally clean—bursts and divergences are delivered via alerts instead of on-chart clutter. PARAMETERS Trend EMA Length (default: 34): Defines the macro bias anchor; increase for higher-timeframe confirmation. Pulse Distance (default: 8): Controls how sensitive momentum extraction becomes. Volatility Window (default: 21): Sample window for realized volatility normalization. Liquidity Window (default: 55): Volume smoothing window that proxies liquidity expansion. Liquidity Reference TF (default: 60): Select a higher timeframe to cross-check whether current volume matches institutional flows. Adaptive Threshold (default: enabled): Disable for fixed thresholds on slower markets; enable for high-volatility assets. Base Burst Threshold (default: 1.25): Minimum flux magnitude that qualifies as an actionable pulse. ALERTS The indicator includes four alert conditions: Bull Burst: Detects upside liquidity pulses Bear Burst: Detects downside liquidity pulses Bull Divergence: Flags bullish delta divergence Bear Divergence: Flags bearish delta divergence LIMITATIONS This indicator is designed for liquid futures and equity markets. Performance may degrade in low-volume or highly illiquid instruments. The adaptive threshold system works best on timeframes where sufficient volatility history exists (typically 15-minute charts and above). Divergence signals are probabilistic and should be confirmed with price action. INSERT_CHART_SNAPSHOT_URL_HERE --- ## RangeLattice Mapper RangeLattice Mapper constructs a higher-timeframe scaffolding on any intraday chart, locking in structural highs/lows, mid/quarter grids, VWAP confluence, and live acceptance/break analytics. It provides a non-repainting overlay that turns range management into a disciplined process. HOW IT WORKS Structure Harvesting – Using request.security() , the script samples highs/lows from a user-selected timeframe (default 240 minutes) over a configurable lookback to establish the dominant range. Grid Construction – Midpoint and quarter levels are derived mathematically, mirroring how institutional traders map distribution/accumulation zones. Acceptance Detection – Consecutive closes inside the range flip an acceptance flag and darken the cloud, signaling balanced auction conditions. Break Confirmation – Multi-bar closes outside the structure raise break labels and alerts, filtering the countless fake-outs that plague breakout traders. VWAP Fan Overlay – Session VWAP plus ATR-based bands provide a live measure of flow centering relative to the lattice. HOW TO USE IT Range Plays : Fade taps of the outer rails only when acceptance is active and VWAP sits inside the grid—this is where mean-reversion works best. Breakout Plays : Wait for confirmed break labels before entering expansion trades; the dashboard's Width/ATR metric tells you if the expansion has enough fuel. Market Prep : Carry the same lattice from pre-market into regular trading hours by keeping the structure timeframe fixed; alerts keep you notified even when managing multiple tickers. VISUAL FEATURES Range Tap and Mid Pivot markers provide a tape-reading breadcrumb trail for journaling. Cloud fill opacity tightens when acceptance persists, visually signaling balance compressions ready to break. Dashboard displays absolute width, ATR-normalized width, and current state (Balanced vs Transitional) so you can glance across charts quickly. Acceptance Flag toggle: Keep the repeated acceptance squares hidden until you need to audit balance. PARAMETERS Structure Timeframe (default: 240): Choose the timeframe whose ranges matter most (4H for indices, Daily for stocks). Structure Lookback (default: 60): Bars sampled on the structure timeframe. Acceptance Bars (default: 8): How many consecutive bars inside the range confirm balance. Break Confirmation Bars (default: 3): Bars required outside the range to validate a breakout. ATR Reference (default: 14): ATR period for width normalization. Show Midpoint Grid (default: enabled): Display the midpoint and quarter levels. Show Adaptive VWAP Fan (default: enabled): Toggle the VWAP channel for assets where volume distribution matters most. Show Acceptance Flags (default: disabled): Turn the acceptance markers on/off for maximum visual control. Show Range Dashboard (default: enabled): Disable if screen space is limited, re-enable during prep sessions. ALERTS The indicator includes five alert conditions: Range High Tap: Price interacted with the RangeLattice high Range Low Tap: Price interacted with the RangeLattice low Range Mid Tap: Price interacted with the RangeLattice mid Range Break Up: Confirmed upside breakout Range Break Down: Confirmed downside breakout LIMITATIONS This indicator works best on liquid instruments with clear structural levels. On very low timeframes (1-minute and below), the structure may update too frequently to be useful. The acceptance/break confirmation system requires patience—faster traders may find the multi-bar confirmation too slow for scalping. The VWAP fan is session-based and resets daily, which may not suit all trading styles. ---
Pine Script® Indikator
von officialjackofalltrades
Session Opening Range Breakout (ORBO)This strategy automates a classic Opening Range Breakout (ORBO) approach: it builds a price range for the first minutes after the market opens, then looks for strong breakouts above or below that range to catch early directional moves. Concept The idea behind ORBO is simple: The first minutes after the session open are often highly informative. Price forms an “opening range” that acts as a mini support/resistance zone. A clean breakout beyond this zone can lead to high-momentum moves. This script turns that logic into a fully backtestable strategy in TradingView. How the strategy works Opening Range Session Default session: 09:30–09:50 (exchange time) During this window, the script tracks: orHigh → highest high within the session orLow → lowest low within the session This forms your Opening Range for the day. Breakout Logic (after the window ends) Once the defined session ends: Long Entry: If the close crosses above the Opening Range High (orHigh), → strategy.entry("OR Long", strategy.long) is triggered. Short Entry: If the close crosses below the Opening Range Low (orLow), → strategy.entry("OR Short", strategy.short) is triggered. Only one opening range per day is considered, which keeps the logic clean and easy to interpret. Daily Reset At the start of a new trading day, the script resets: orHigh := na orLow := na A fresh Opening Range is then built using the next session’s 09:30–09:50 candles. This ensures entries are always based on today’s structure, not yesterday’s. Visuals & Inputs Inputs: Opening range session → default: "0930-0950" Show OR levels → toggle visibility of OR High / Low lines Fill range body → optional shaded zone between OR High and OR Low Chart visuals: A green line marks the Opening Range High. A red line marks the Opening Range Low. Optional yellow fill highlights the entire OR zone. Background shading during the session shows when the range is currently being built. These visuals make it easy to see: Where the OR sits relative to current price How clean / noisy the breakout was How often price respects or rejects the opening zone Backtesting & Optimization Because this is written as a strategy(): You can use TradingView’s Strategy Tester to view: Win rate Net profit Drawdown Profit factor Equity curve Ideas to experiment with: Change the session window (e.g., 09:15–09:45, 10:00–10:30) Apply to different: Markets: indices, FX, crypto, stocks Timeframes: 1m / 5m / 15m Add your own: Stop Loss & Take Profit levels Time filters (only trade certain days / times) Volatility filters (e.g., ATR, range size thresholds) Higher-timeframe trend filter (e.g., only take longs above 200 EMA)
Pine Script® Strategie
von AIScripts
Superior-Range Bound Renko - Alerts - 11-29-25 - Signal LynxSuperior-Range Bound Renko – Alerts Edition with Advanced Risk Management Template Signal Lynx | Free Scripts supporting Automation for the Night-Shift Nation 🌙 1. Overview This is the Alerts & Indicator Edition of Superior-Range Bound Renko (RBR). The Strategy version is built for backtesting inside TradingView. This Alerts version is built for automation: it emits clean, discrete alert events that you can route into webhooks, bots, or relay engines (including your own Signal Lynx-style infrastructure). Under the hood, this script contains the same core engine as the strategy: Adaptive Range Bounding based on volatility Renko Brick Emulation on standard candles A stack of Laguerre Filters for impulse detection K-Means-style Adaptive SuperTrend for trend confirmation The full Signal Lynx Risk Management Engine (state machine, layered exits, AATS, RSIS, etc.) The difference is in what we output: Instead of placing historical trades, this version: Plots the entry and RM signals in a separate pane (overlay = false) Exposes alertconditions for: Long Entry Short Entry Close Long Close Short TP1, TP2, TP3 hits (Staged Take Profit) This makes it ideal as the signal source for automated execution via TradingView Alerts + Webhooks. 2. Quick Action Guide (TL;DR) Best Timeframe: 4H and above. This is a swing-trading / position-trading style engine, not a micro-scalper. Best Assets: Volatile but structured markets, e.g.: BTC, ETH, XAUUSD (Gold), GBPJPY, and similar high-volatility majors or indices. Script Type: indicator() – Alerts & Visualization Only No built-in order placement All “orders” are emitted as alerts for your external bot or manual handling Strategy Type: Volatility-Adaptive Trend Following + Impulse Detection using Renko-like structure and multi-layer Laguerre filters. Repainting: Designed to be non-repainting on closed candles. The underlying Risk Management engine is built around previous-bar data (close , high , low ) for execution-critical logic. Intrabar values can move while the bar is forming (normal for any advanced signal), but once a bar closes, the alert logic is stable. Recommended Alert Settings: Condition: one of the built-in signals (see section 3.B) Options: “Once Per Bar Close” is strongly recommended for automation Message: JSON, CSV, or simple tokens – whatever your webhook / relay expects 3. Detailed Report: How the Alerts Edition Works A. Relationship to the Strategy Version The Alerts Edition shares the same internal logic as the strategy version: Same Adaptive Lookback and volatility normalization Same Range and Close Range construction Same Renko Brick Emulator and directional memory (renkoDir) Same Fib structures, Laguerre stack, K-Means SuperTrend, and Baseline signals (B1, B2) Same Risk Management Engine and layered exits In the strategy script, these signals are wired into strategy.entry, strategy.exit, and strategy.close. In the alerts script: We still compute the final entry/exit signals (Fin, CloseEmAll, TakeProfit1Plot, etc.) Instead of placing trades, we: Plot them for visual inspection Expose them via alertcondition(...) so that TradingView can fire alerts. This ensures that: If you use the same settings on the same symbol/timeframe, the Alerts Edition and Strategy Edition agree on where entries and exits occur. (Subject only to normal intrabar vs. bar-close differences.) B. Signals & Alert Conditions The alerts script focuses on discrete, automation-friendly events. Internally, the main signals are: Fin – Final entry decision from the RM engine CloseEmAll – RM-driven “hard close” signal (for full-position exits) TakeProfit1Plot / 2Plot / 3Plot – One-time event markers when each TP stage is hit On the chart (in the separate indicator pane), you get: plot(Fin) – where: +2 = Long Entry event -2 = Short Entry event plot(CloseEmAll) – where: +1 = “Close Long” event -1 = “Close Short” event plot(TP1/TP2/TP3) (if Staged TP is enabled) – integer tags for TP hits: +1 / +2 / +3 = TP1 / TP2 / TP3 for Longs -1 / -2 / -3 = TP1 / TP2 / TP3 for Shorts The corresponding alertconditions are: Long Entry alertcondition(Fin == 2, title="Long Entry", message="Long Entry Triggered") Fire this to open/scale a long position in your bot. Short Entry alertcondition(Fin == -2, title="Short Entry", message="Short Entry Triggered") Fire this to open/scale a short position. Close Long alertcondition(CloseEmAll == 1, title="Close Long", message="Close Long Triggered") Fire this to fully exit a long position. Close Short alertcondition(CloseEmAll == -1, title="Close Short", message="Close Short Triggered") Fire this to fully exit a short position. TP 1 Hit alertcondition(TakeProfit1Plot != 0, title="TP 1 Hit", message="TP 1 Level Reached") First staged take profit hit (either long or short). Your bot can interpret the direction based on position state or message tags. TP 2 Hit alertcondition(TakeProfit2Plot != 0, title="TP 2 Hit", message="TP 2 Level Reached") TP 3 Hit alertcondition(TakeProfit3Plot != 0, title="TP 3 Hit", message="TP 3 Level Reached") Together, these give you a complete trade lifecycle: Open Long / Short Optionally scale out via TP1/TP2/TP3 Close remaining via Close Long / Close Short All while the Risk Management Engine enforces the same logic as the strategy version. C. Using This Script for Automation This Alerts Edition is designed for: Webhook-based bots Execution relays (e.g., your own Lynx-Relay-style engine) Dedicated external trade managers Typical setup flow: Add the script to your chart Same symbol, timeframe, and settings you use in the Strategy Edition backtests. Configure Inputs: Longs / Shorts enabled Risk Management toggles (SL, TS, Staged TP, AATS, RSIS) Weekend filter (if you do not want weekend trades) RBR-specific knobs (Adaptive Lookback, Brick type, ATR vs Standard Brick, etc.) Create Alerts for Each Event Type You Need: Long Entry Short Entry Close Long Close Short TP1 / TP2 / TP3 (optional, if your bot handles partial closes) For each: Condition: the corresponding alertcondition Option: “Once Per Bar Close” is strongly recommended Message: You can use structured JSON or a simple token set like: {"side":"long","event":"entry","symbol":"{{ticker}}","time":"{{timenow}}"} or a simpler text for manual trading like: LONG ENTRY | {{ticker}} | {{interval}} Wire Up Your Bot / Relay: Point TradingView’s webhook URL to your execution engine Parse the messages and map them into: Exchange Symbol Side (long/short) Action (open/close/partial) Size and risk model (this script does not position-size for you; it only signals when, not how much.) Because the alerts come from a non-repainting, RM-backed engine that you’ve already validated via the Strategy Edition, you get a much cleaner automation pipeline. D. Repainting Protection (Alerts Edition) The same protections as the Strategy Edition apply here: Execution-critical logic (trailing stop, TP triggers, SL, RM state changes) uses previous bar OHLC: open , high , low , close No security() with lookahead or future-bar dependencies. This means: Alerts are designed to fire on states that would have been visible at bar close, not on hypothetical “future history.” Important practical note: Intrabar: While a bar is forming, internal conditions can oscillate. Bar Close: With “Once Per Bar Close” alerts, the fired signal corresponds to the final state of the engine for that candle, matching your Strategy Edition expectations. 4. For Developers & Modders You can treat this Alerts script as an ”RM + Alert Framework” and inject any signal logic you want. Where to plug in: Find the section: // BASELINE & SIGNAL GENERATION You’ll see how B1 and B2 are built from the RBR stack and then combined: baseSig = B2 altSig = B1 finalSig = sigSwap ? baseSig : altSig To use your own logic: Replace or wrap the code that sets baseSig / altSig with your own conditions: e.g., RSI, MACD, Heikin Ashi filters, candle patterns, volume filters, etc. Make sure your final decision is still: 2 → Long / Buy signal -2 → Short / Sell signal 0 → No trade finalSig is then passed into the RM engine and eventually becomes Fin, which: Drives the Long/Short Entry alerts Interacts with the RM state machine to integrate properly with AATS, SL, TS, TP, etc. Because this script already exposes alertconditions for key lifecycle events, you don’t need to re-wire alerts each time — just ensure your logic feeds into finalSig correctly. This lets you use the Signal Lynx Risk Management Engine + Alerts wrapper as a drop-in chassis for your own strategies. 5. About Signal Lynx Automation for the Night-Shift Nation 🌙 Signal Lynx builds tools and templates that help traders move from: “I have an indicator” → “I have a structured, automatable strategy with real risk management.” This Superior-Range Bound Renko – Alerts Edition is the automation-focused companion to the Strategy Edition. It’s designed for: Traders who backtest with the Strategy version Then deploy live signals with this Alerts version via webhooks or bots While relying on the same non-repainting, RM-driven logic We release this code under the Mozilla Public License 2.0 (MPL-2.0) to support the Pine community with: Transparent, inspectable logic A reusable Risk Management template A reference implementation of advanced adaptive logic + alerts If you are exploring full-stack automation (TradingView → Webhooks → Exchange / VPS), keep Signal Lynx in your search. License: Mozilla Public License 2.0 (Open Source). If you build improvements or helpful variants, please consider sharing them back with the community.
Pine Script® Indikator
von SignalLynx
Superior-Range Bound Renko - Strategy - 11-29-25 - SignalLynxSuperior-Range Bound Renko Strategy with Advanced Risk Management Template Signal Lynx | Free Scripts supporting Automation for the Night-Shift Nation 🌙 1. Overview Welcome to Superior-Range Bound Renko (RBR) — a volatility-aware, structure-respecting swing-trading system built on top of a full Risk Management (RM) Template from Signal Lynx. Instead of relying on static lookbacks (like “14-period RSI”) or plain MA crosses, Superior RBR: Adapts its range definition to market volatility in real time Emulates Renko Bricks on a standard, time-based chart (no Renko chart type required) Uses a stack of Laguerre Filters to detect genuine impulse vs. noise Adds an Adaptive SuperTrend powered by a small k-means-style clustering routine on volatility Under the hood, this script also includes the full Signal Lynx Risk Management Engine: A state machine that separates “Signal” from “Execution” Layered exit tools: Stop Loss, Trailing Stop, Staged Take Profit, Advanced Adaptive Trailing Stop (AATS), and an RSI-style stop (RSIS) Designed for non-repainting behavior on closed candles by basing execution-critical logic on previous-bar data We are publishing this as an open-source template so traders and developers can leverage a professional-grade RM engine while integrating their own signal logic if they wish. 2. Quick Action Guide (TL;DR) Best Timeframe: 4 Hours (H4) and above. This is a high-conviction swing-trading system, not a scalper. Best Assets: Volatile instruments that still respect market structure: Bitcoin, Ethereum, Gold (XAUUSD), high-volatility Forex pairs (e.g., GBPJPY), indices with clean ranges. Strategy Type: Volatility-Adaptive Trend Following + Impulse Detection. It hunts for genuine expansion out of ranges, not tiny mean-reversion nibbles. Key Feature: Renko Emulation on time-based candles. We mathematically model Renko Bricks and overlay them on your standard chart to define: “Equilibrium” zones (inside the brick structure) “Breakout / impulse” zones (when price AND the impulse line depart from the bricks) Repainting: Designed to be non-repainting on closed candles. All RM execution logic uses confirmed historical data (no future bars, no security() lookahead). Intrabar flicker during formation is allowed, but once a bar closes the engine’s decisions are stable. Core Toggles & Filters: Enable Longs and Shorts independently Optional Weekend filter (block trades on Saturday/Sunday) Per-module toggles: Stop Loss, Trailing Stop, Staged Take Profits, AATS, RSIS 3. Detailed Report: How It Works A. The Strategy Logic: Superior RBR Superior RBR builds its entry signal from multiple mathematical layers working together. 1) Adaptive Lookback (Volatility Normalization) Instead of a fixed 100-bar or 200-bar range, the script: Computes ATR-based volatility over a user-defined period. Normalizes that volatility relative to its recent min/max. Maps the normalized value into a dynamic lookback window between a minimum and maximum (e.g., 4 to 100 bars). High Volatility: The lookback shrinks, so the system reacts faster to explosive moves. Low Volatility: The lookback expands, so the system sees a “bigger picture” and filters out chop. All the core “Range High/Low” and “Range Close High/Low” boundaries are built on top of this adaptive window. 2) Range Construction & Quick Ranges The engine constructs several nested ranges: Outer Range: rangeHighFinal – dynamic highest high rangeLowFinal – dynamic lowest low Inner Close Range: rangeCloseHighFinal – highest close rangeCloseLowFinal – lowest close Quick Ranges: “Half-length” variants of those, used to detect more responsive changes in structure and volatility. These ranges define: The macro box price is trading inside Shorter-term “pressure zones” where price is coiling before expansion 3) Renko Emulation (The Bricks) Rather than using the Renko chart type (which discards time), this script emulates Renko behavior on your normal candles: A “brick size” is defined either: As a standard percentage move, or As a volatility-driven (ATR) brick, optionally inhibited by a minimum standard size The engine tracks a base value and derives: brickUpper – top of the emulated brick brickLower – bottom of the emulated brick When price moves sufficiently beyond those levels, the brick “shifts”, and the directional memory (renkoDir) updates: renkoDir = +2 when bricks are advancing upward renkoDir = -2 when bricks are stepping downward You can think of this as a synthetic Renko tape overlaid on time-based candles: Inside the brick: equilibrium / consolidation Breaking away from the brick: momentum / expansion 4) Impulse Tracking with Laguerre Filters The script uses multiple Laguerre Filters to smooth price and brick-derived data without traditional lag. Key filters include: LagF_1 / LagF_W: Based on brick upper/lower baselines LagF_Q: Based on HLCC4 (high + low + 2×close)/4 LagF_Y / LagF_P: Complex averages combining brick structures and range averages LagF_V (Primary Impulse Line): A smooth, high-level impulse line derived from a blend of the above plus the outer ranges Conceptually: When the impulse line pushes away from the brick structure and continues in one direction, an impulse move is underway. When its direction flips and begins to roll over, the impulse is fading, hinting at mean reversion back into the range. 5) Fib-Based Structure & Swaps The system also layers in Fib levels derived from the adaptive ranges: Standard levels (12%, 23.6%, 38.2%, 50%, 61%, 76.8%, 88%) from the main range A secondary “swap” set derived from close-range dynamics (fib12Swap, fib23Swap, etc.) These Fibs are used to: Bucket price into structural zones (below 12, between 23–38, etc.) Detect breakouts when price and Laguerre move beyond key Fib thresholds Drive zSwap logic (where a secondary Fib set becomes the active structure once certain conditions are met) 6) Adaptive SuperTrend with K-Means-Style Volatility Clustering Under the hood, the script uses a small k-means-style clustering routine on ATR: ATR is measured over a fixed period The range of ATR values is split into Low, Medium, High volatility centroids Current ATR is assigned to the nearest centroid (cluster) From that, a SuperTrend variant (STK) is computed with dynamic sensitivity: In quiet markets, SuperTrend can afford to be tighter In wild markets, it widens appropriately to avoid constant whipsaw This SuperTrend-based oscillator (LagF_K and its signals) is then combined with the brick and Laguerre stack to confirm valid trend regimes. 7) Final Baseline Signals (+2 / -2) The “brain” of Superior RBR lives in the Baseline & Signal Generation block: Two composite signals are built: B1 and B2: They combine: Fib breakouts Renko direction (renkoDir) Expansion direction (expansionQuickDir) Multiple Laguerre alignments (LagF_Q, LagF_W, LagF_Y, LagF_Z, LagF_P, LagF_V) They also factor in whether Fib structures are expanding or contracting. A user toggle selects the “Baseline” signal: finalSig = B2 (default) or B1 (alternate baseline) finalSig is then filtered through the RM state machine and only when everything aligns, we emit: +2 = Long / Buy signal -2 = Short / Sell signal 0 = No new trade Those +2 / -2 values are what feed the Risk Management Engine. B. The Risk Management (RM) Engine This script features the Signal Lynx Risk Management Engine, a proprietary state machine built to separate Signal from Execution. Instead of firing orders directly on indicator conditions, we: Convert the raw signal into a clean integer (Fin = +2 / -2 / 0) Feed it into a Trade State Machine that understands: Are we flat? Are we in a long or short? Are we in a closing sequence? Should we permit re-entry now or wait? Logic Injection / Template Concept: The RM engine expects a simple integer: +2 → Buy -2 → Sell Everything else (0) is “no new trade” This makes the script a template: You can remove the Superior RBR block Drop in your own logic (RSI, MACD, price action, etc.) As long as you output +2 or -2 into the same signal channel, the RM engine can drive all exits and state transitions. Aggressive vs Conservative Modes: The input AgressiveRM (Aggressive RM) governs how we interpret signals: Conservative Mode (Aggressive RM = false): Uses a more filtered internal signal (AF) to open trades Effectively waits for a clean trend flip / confirmation before new entries Minimizes whipsaw at the cost of fewer trades Aggressive Mode (Aggressive RM = true): Reacts directly to the fresh alert (AO) pulses Allows faster re-entries in the same direction after RM-based exits Still respects your pyramiding setting; this script ships with pyramiding = 0 by default, so it will not stack multiple positions unless you change that parameter in the strategy() call. The state machine enforces discipline on top of your signal logic, reducing double-fires and signal spam. C. Advanced Exit Protocols (Layered Defense) The exit side is where this template really shines. Instead of a single “take profit or stop loss,” it uses multiple, cooperating layers. 1) Hard Stop Loss A classic percentage-based Stop Loss (SL) relative to the entry price. Acts as a final “catastrophic protection” layer for unexpected moves. 2) Standard Trailing Stop A percentage-based Trailing Stop (TS) that: Activates only after price has moved a certain percentage in your favor (tsActivation) Then trails price by a configurable percentage (ts) This is a straightforward, battle-tested trailing mechanism. 3) Staged Take Profits (Three Levels) The script supports three staged Take Profit levels (TP1, TP2, TP3): Each stage has: Activation percentage (how far price must move in your favor) Trailing amount for that stage Position percentage to close Example setup: TP1: Activate at +10% Trailing 5% Close 10% of the position TP2: Activate at +20% Trailing 10% Close another 10% TP3: Activate at +30% Trailing 5% Close the remaining 80% (“runner”) You can tailor these quantities for partial scaling out vs. letting a core position ride. 4) Advanced Adaptive Trailing Stop (AATS) AATS is a sophisticated volatility- and structure-aware stop: Uses Hirashima Sugita style levels (HSRS) to model “floors” and “ceilings” of price: Dungeon → Lower floors → Mid → Upper floors → Penthouse These levels classify where current price sits within a long-term distribution. Combines HSRS with Bollinger-style envelopes and EMAs to determine: Is price extended far into the upper structure? Is it compressed near the lower ranges? From this, it computes an adaptive factor that controls how tight or loose the trailing level (aATS / bATS) should be: High Volatility / Penthouse areas: Stop loosens to avoid getting wicked out by inevitable spikes. Low Volatility / compressed structure: Stop tightens to lock in and protect profit. AATS is designed to be the “smart last line” that responds to context instead of a single fixed percentage. 5) RSI-Style Stop (RSIS) On top of AATS, the script includes a RSI-like regime filter: A McGinley Dynamic mean of price plus ATR bands creates a dynamic channel. Crosses above the top band and below the lower band change a directional state. When enabled (UseRSIS): RSIS can confirm or veto AATS closes: For longs: A shift to bearish RSIS can force exits sooner. For shorts: A shift to bullish RSIS can do the same. This extra layer helps avoid over-reactive stops in strong trends while still respecting a regime change when it happens. D. Repainting Protection Many strategies look incredible in the Strategy Tester but fail in live trading because they rely on intrabar values or future-knowledge functions. This template is built with closed-candle realism in mind: The Risk Management logic explicitly uses previous bar data (open , high , low , close ) for the key decisions on: Trailing stop updates TP triggers SL hits RM state transitions No security() lookahead or future-bar access is used. This means: Backtest behavior is designed to match what you can actually get with TradingView alerts and live automation. Signals may “flicker” intrabar while the candle is forming (as with any strategy), but on closed candles, the RM decisions are stable and non-repainting. 4. For Developers & Modders We strongly encourage you to mod this script. To plug your own strategy into the RM engine: Look for the section titled: // BASELINE & SIGNAL GENERATION You will see composite logic building B1 and B2, and then selecting: baseSig = B2 altSig = B1 finalSig = sigSwap ? baseSig : altSig You can replace the content used to generate baseSig / altSig with your own logic, for example: RSI crosses MACD histogram flips Candle pattern detectors External condition flags Requirements are simple: Your final logic must output: 2 → Buy signal -2 → Sell signal 0 → No new trade That output flows into the RM engine via finalSig → AlertOpen → state machine → Fin. Once you wire your signals into finalSig, the entire Risk Management system (Stops, TPs, AATS, RSIS, re-entry logic, weekend filters, long/short toggles) becomes available for your custom strategy without re-inventing the wheel. This makes Superior RBR not just a strategy, but a reference architecture for serious Pine dev work. 5. About Signal Lynx Automation for the Night-Shift Nation 🌙 Signal Lynx focuses on helping traders and developers bridge the gap between indicator logic and real-world automation. The same RM engine you see here powers multiple internal systems and templates, including other public scripts like the Super-AO Strategy with Advanced Risk Management. We provide this code open source under the Mozilla Public License 2.0 (MPL-2.0) to: Demonstrate how Adaptive Logic and structured Risk Management can outperform static, one-layer indicators Give Pine Script users a battle-tested RM backbone they can reuse, remix, and extend If you are looking to automate your TradingView strategies, route signals to exchanges, or simply want safer, smarter strategy structures, please keep Signal Lynx in your search. License: Mozilla Public License 2.0 (Open Source). If you make beneficial modifications, please consider releasing them back to the community so everyone can benefit.
Pine Script® Strategie
von SignalLynx
Liquidity ThermometerThis is a universal indicator that assesses market liquidity based on five key market parameters: volume, volatility, candlestick range, body size, and price momentum. The indicator does not use open interest data and is suitable for all markets, including spot, futures, and Forex. This indicator normalizes each metric historically and creates a composite index between 0 and 1, where higher values ​​correspond to a stable and calm market environment, and lower values ​​indicate periods of increased risk and potential liquidity stress. LT generates an integral liquidity index in the range based on five normalized components: -nVol — normalized volume, reflecting trading density and activity. -nATR — the volatility component (ATR), inverted, as high volatility is typically associated with declining liquidity. -nRange — the normalized candlestick range, also inverted to assess the structural narrowness of the price movement. -nBody — the normalized candlestick body size (|close − open|), inverted to assess the balance of supply and demand. -nMove — the normalized value of the price impulse movement (|Δclose|), reflecting short-term price spikes. Each metric is linearly normalized over a sliding window (200 bars) using the formula: norm(x) = (x − min) / (max − min), where at max = min, the value is fixed at 0.5 to ensure stability. The ALT index is calculated as a weighted combination: ALT = 0.35 nVol + 0.20 (1 − nATR) + 0.20 (1 − nRange) + 0.15 (1 − nBody) + 0.10 (1 − nMove) The result is further smoothed using EMA(3) to reduce micronoise. Red Zone (MLI < 0.25) — Risk, Thin Liquidity When the indicator falls into the red zone, it means the market is extremely volatile: Characteristics: Low volume — small trades have a strong impact on the price. High volatility — candlesticks rise or fall sharply. Wide candlestick range — the market is "breathing heavily," easily breaking price extremes. Impulsive movements — small market shocks lead to sharp spikes. Thin liquidity — few orders in the order book, large orders "eat up" the market. What this means for a trader: 🔥 High risk of spikes and false breakouts. ⚠ Possible series of liquidations on leverage. ❌ It is not recommended to enter long or short positions without a filter or protection. ✅ Can be used for short scalping strategies if you know the entry point, but very carefully. Green Zone (MLI > 0.75) — High Liquidity, Safe Zone When the indicator rises into the green zone, it means the market is stable and balanced: Characteristics: High volume — the market is deep, orders are executed without a strong impact on the price. Low volatility — candlesticks are stable, no sharp spikes. Narrow candlestick range — price moves calmly. Weak impulse movements — no sharp surges. Sufficient liquidity — the market can handle large orders. What this means for a trader: ✅ Safe zone for opening positions. 🔄 Easier to set stop-loss and take-profit orders. 💡 You can trade both up and down, the risk of sharp movements is minimal. ⚡ Under these conditions, there is a lower risk of spikes and accidental liquidations. It does not predict price movements or guarantee results. It is an analytical tool intended for additional research into market structure.
Pine Script® Indikator
von Zdorman
Forex Session TrackerForex Session Tracker - Professional Trading Session Indicator The Forex Session Tracker is a comprehensive and visually intuitive indicator designed specifically for forex traders who need precise tracking of major global trading sessions. This powerful tool helps traders identify active market sessions, monitor session-specific price ranges, and capitalize on volatility patterns unique to each trading period. Understanding when major financial centers are active is crucial for forex trading success. This indicator provides real-time visualization of the Tokyo, London, New York, and Sydney trading sessions, allowing traders to align their strategies with peak liquidity periods and avoid low-volatility trading windows. --- Key Features 📊 Four Major Global Trading Sessions The indicator tracks all four primary forex trading sessions with precision: - Tokyo Session (Asian Market) - Captures the Asian trading hours, ideal for JPY, AUD, and NZD pairs - London Session (European Market) - Monitors the most liquid trading period, perfect for EUR, GBP pairs - New York Session (American Market) - Tracks US market hours, essential for USD-based currency pairs - Sydney Session (Pacific Market) - Identifies the opening of the trading week and AUD/NZD activity Each session is fully customizable with individual color schemes, making it easy to distinguish between different market periods at a glance. 🎯 Session Range Visualization For each active trading session, the indicator automatically: - Draws rectangular boxes that highlight the session's time period - Tracks and displays session HIGH and LOW price levels in real-time - Creates horizontal lines at session extremes for easy reference - Positions session labels at the center of each trading period - Updates dynamically as new highs or lows are formed within the session This visual approach helps traders quickly identify: - Session breakout opportunities - Support and resistance zones formed during specific sessions - Range-bound vs. trending session behavior - Key price levels that institutional traders are watching 📱 Live Information Dashboard A sleek, professional information panel displays: - Real-time session status - Instantly see which sessions are currently active - Color-coded indicators - Green dots for active sessions, gray for closed sessions - Timezone information - Confirms your current timezone settings - Customizable positioning - Place the dashboard anywhere on your chart (Top Left, Top Right, Bottom Left, Bottom Right) - Adjustable size - Choose from Tiny, Small, Normal, or Large text sizes for optimal visibility The dashboard provides at-a-glance awareness of market conditions without cluttering your chart analysis. ⚙️ Extensive Customization Options Every aspect of the indicator can be tailored to your trading preferences: Session-Specific Controls: - Enable/disable individual sessions - Customize colors for each trading period - Adjust session times to match your broker's server time - Toggle background highlighting on/off - Show/hide session high/low lines independently General Settings: - UTC Offset Control - Adjust timezone from UTC-12 to UTC+14 - Exchange Timezone Option - Automatically use your chart's exchange timezone - Background Transparency - Fine-tune the opacity of session highlighting (0-100%) - Session Labels - Show or hide session name labels - Information Panel - Toggle the live status dashboard on/off Style Settings: - Turn session backgrounds ON/OFF directly from the Style tab - Maintain clean charts while keeping all analytical features active 🔔 Built-in Alert System Stay informed about session openings with customizable alerts: - Tokyo Session Started - London Session Started - New York Session Started - Sydney Session Started Set up notifications to never miss important market opening periods, even when you're away from your charts. --- How to Use This Indicator For Day Traders: 1. Identify High-Volatility Periods - Focus your trading during London and New York session overlaps for maximum liquidity 2. Monitor Session Breakouts - Watch for price breaks above/below session highs and lows 3. Avoid Low-Volume Periods - Recognize when major sessions are closed to avoid false signals For Swing Traders: 1. Mark Key Levels - Use session highs and lows as support/resistance zones 2. Track Multi-Session Patterns - Observe how price behaves across different trading sessions 3. Plan Entry/Exit Points - Time your trades around session openings for better execution For Currency-Specific Traders: 1. JPY Pairs - Focus on Tokyo session movements 2. EUR/GBP Pairs - Monitor London session activity 3. USD Pairs - Track New York session volatility 4. AUD/NZD Pairs - Watch Sydney and Tokyo sessions --- Technical Specifications - Pine Script Version: 5 - Overlay Indicator: Yes (displays directly on price chart) - Maximum Bars Back: 500 - Drawing Objects: Up to 500 lines, boxes, and labels - Performance: Optimized for real-time data processing - Compatibility: Works on all timeframes (recommended: 5m to 1H for session tracking) --- Installation & Setup 1. Add to Chart - Click "Add to Chart" after copying the script to Pine Editor 2. Configure Timezone - Set your UTC offset or enable "Use Exchange Timezone" 3. Customize Colors - Choose your preferred color scheme for each session 4. Adjust Display - Enable/disable features based on your trading style 5. Set Alerts - Create alert notifications for session starts --- Best Practices ✅ Combine with Price Action - Use session ranges alongside candlestick patterns for confirmation ✅ Watch Session Overlaps - The London-New York overlap (1300-1600 UTC) typically shows highest volatility ✅ Respect Session Highs/Lows - These levels often act as intraday support and resistance ✅ Adjust for Your Broker - Verify session times match your broker's server clock ✅ Use Multiple Timeframes - View sessions on both lower (15m) and higher (1H) timeframes for context --- Why Choose Forex Session Tracker Pro? ✨ Professional Grade Tool - Built with clean, efficient code following TradingView best practices ✨ Beginner Friendly - Intuitive design with clear visual cues ✨ Highly Customizable - Adapt every feature to match your trading style ✨ Performance Optimized - Lightweight code that won't slow down your charts ✨ Actively Maintained - Regular updates and improvements ✨ No Repainting - All visual elements are fixed once the session completes --- Support & Updates This indicator is designed to provide reliable, accurate session tracking for forex traders of all experience levels. Whether you're a scalper looking for high-volatility windows or a position trader marking key institutional levels, the Forex Session Tracker Pro delivers the insights you need to make informed trading decisions. Happy Trading! 📈 --- Disclaimer This indicator is a tool for technical analysis and should be used as part of a comprehensive trading strategy. Past performance does not guarantee future results. Always practice proper risk management and never risk more than you can afford to lose. Trading forex carries a high level of risk and may not be suitable for all investors.
Pine Script® Indikator
von humayunmha
Range Oascilator + LessDivergences + MACD+StochRSIRange Oscillator + EMA Filter Calculates a custom oscillator based on the highest high and lowest low over a chosen period. Generates BUY signals when the oscillator crosses up from the oversold zone and price is above the EMA. Generates SELL signals when the oscillator crosses down from the overbought zone and price is below the EMA. MACD (3‑10‑16 EMA Settings) Uses fast EMA = 3, slow EMA = 10, signal EMA = 16. Detects bullish and bearish crossovers. These crossovers only trigger a single unified buy/sell signal if they coincide with Stochastic RSI being in oversold (for buy) or overbought (for sell) zones. Stochastic RSI Standard calculation with %K and %D smoothing. Defines oversold (<20) and overbought (>80) zones. Used both for divergence detection and as a filter for MACD signals. Divergence Detection RSI Divergence: Price makes a lower low but RSI makes a higher low (bullish), or price makes a higher high but RSI makes a lower high (bearish). MACD Histogram Divergence: Price makes a lower low but MACD histogram makes a higher low (bullish), or price makes a higher high but MACD histogram makes a lower high (bearish). Stochastic RSI Divergence: Similar logic applied to %K line. Divergences are flagged only once per pivot to avoid repetitive signals. Visuals EMA plotted on chart. BUY/SELL signals shown as triangles above/below bars. Divergences shown as labels (e.g., “RSI BullDiv”, “MACD BearDiv”). Unified MACD+Stoch RSI signals shown in distinct colors (lime for buy, orange for sell).
Pine Script® Indikator
von hakantugurlu77
Range breaking indicatorDescription Bull/Bear Area Ratio (last N candles) helps identify potential end-of-range situations by analyzing the relative strength of bullish vs bearish candles over a rolling window of N bars. Instead of simply counting up or down candles, this script measures the "area" of each candle — the absolute distance between open and close, optionally weighted by volume. By summing these areas over the last N bars, it calculates the percentage of bullish and bearish energy within that period. When both sides become balanced (near 50/50), it often signals range exhaustion or possible trend transition. How it works Calculates the bullish and bearish area of each candle (abs(close - open), optionally × volume). Maintains rolling buffers of the last N bars to compute running totals. Plots both Bullish % (green) and Bearish % (red). Highlights possible range-ending zones when the bullish ratio nears 50% ± threshold. Displays a label showing the current balance. Includes an alert condition when equilibrium is detected. Inputs Number of candles (N) – Rolling window length. Use volume weighting – Multiplies each candle’s area by its volume. Balance threshold (%) – Sensitivity for detecting equilibrium (default: 10%). Best use Combine with volume or volatility indicators to confirm market compression or expansion. Use on higher timeframes (H1, H4, D1) to detect early signs of accumulation or distribution. Works across all asset types: crypto, forex, stocks, indices, etc. Alerts An alert is triggered when: “The range of the last N candles is balanced (possible end of range).”
Pine Script® Indikator
von sudo_delete_evil
Range Percentage Analyzer This indicator is a tool for analyzing the market range and trend. It calculates the extent of price movement between a specified starting point and the current price, displaying it as a percentage. The calculation can be based on a fixed lookback period (e.g., the last 30 candles) or from a fixed start date. It also provides a clear table that shows the general trend in "Trend" mode, and the relative strength of the base and quote currencies of forex pairs (e.g., EURUSD) in "Forex" mode. User Guide Calculation Method This setting determines how the indicator defines the starting point for the calculation. Lookback Period: In this mode, the indicator uses the last N candles (the number can be specified in the "Lookback Period (bars)" field, maximum 250). The starting point is "floating," meaning it shifts with each new candle. For example, with a setting of 30, the 30th candle from the current one will always be the starting point. Date Based: In this mode, the calculation starts from a fixed date and time you select. This mode is ideal for measuring performance from a specific event (e.g., news, start of a week/month). Note: If you select a date in "Date Based" mode for which no data is available on the current timeframe (e.g., switching to a very low timeframe), the indicator will automatically use the earliest available candle as the starting point. Start Date & Time This setting is only active in "Date Based" mode. Here you can specify the fixed starting point for the calculation. The specified time is in the Exchange timezone. Important limitation: Due to TradingView platform limits, visual elements (box, line) are only drawn for a maximum of 250 candles back. If the set date is older than this, the calculation still applies to the entire period (from the set date), but the drawing only covers the last 250 candles. When switching to a higher timeframe, the range may restart from a slightly later bar due to TradingView's bar alignment. For best accuracy, set your timeframe first, then select the start date. Table Mode This setting controls what data the information table displays. Trend: This is the default mode, which works on any symbol (stock, index, crypto, etc.). It displays information related to the trend. Forex: This is a special mode used to measure the strength of currency pairs. It only works on symbols with exactly 6 characters (e.g., "EURUSD", "BTCUSD"). It treats the first 3 characters as the base currency (e.g., EUR) and the last 3 as the quote currency (e.g., USD). If the symbol does not have 6 characters, the table will automatically display in "Trend" mode. Extremes Trend Row If this is enabled, the table displays an additional row that determines the trend based on the formation order of the high and low within the analyzed range. The logic is as follows: Bullish: Indicated if the low was formed before the high. (Or if they formed on the same candle, which was a bullish candle). Bearish: Indicated if the high was formed before the low. (Or if they formed on the same candle, which was a bearish candle). Neutral: Indicated if the high and low formed on the same candle, and it was a "doji" candle (close = open). Upper & Lower Threshold These settings control the logic for the "Change Trend" and "Forex Display" rows at the top of the table. They determine when the total percentage change for the entire period is considered "Bullish/Strong", "Bearish/Weak", or "Neutral". Upper Threshold (%): The percentage value (default 0.1%) above which the indicator considers the change "Bullish/Strong". Lower Threshold (%): The percentage value (default -0.1%) below which the indicator considers the change "Bearish/Weak". If the change is between the two, the signal is Neutral.
Pine Script® Indikator
von nzsolti18
Session Streaks [LuxAlgo]The Session Streaks tool allows traders to identify whether a session is bullish or bearish on the chart. It also shows the current session streak, or the number of consecutive bullish or bearish sessions. The tool features a dashboard with information about the session streaks of the underlying product on the chart. 🔶 USAGE Analyzing session streaks is commonly used for market timing by studying the number of consecutive sessions over time and how long they last before the market changes direction. We identify a bullish session as one in which the closing price is equal to or greater than the opening price, and a bearish session as one in which the closing price is below the opening price. Each session is labeled according to its bias (bullish or bearish) and the number of consecutive sessions of the same type that conform the current streak. 🔹 Dashboard The dashboard at the top shows information about the current session. Under the "Streaks" header, historical information about session streaks is displayed, divided into bullish and bearish categories. Number: Total number of streaks. Median: The average duration of those streaks. We chose the median over the mean to avoid misrepresentation due to outliers. Mode: The most common streak duration. As the image shows, for this particular market, there are more bullish streaks than bearish ones. Bullish streaks have an average duration that is longer than that of bearish streaks, and both have the same most common streak duration. If the current session is bullish and the median streak duration for bullish sessions is three, then we could consider scenarios in which the next two sessions are bullish. 🔶 DETAILS 🔹 Streaks On Larger Timeframes On timeframes lower than or equal to Daily, the tool identifies each consecutive session, but this behavior changes on larger timeframes. On timeframes larger than daily, the tool identifies the last session of each bar. Let's use the chart in the image as a reference. At the top of the image, there is a daily chart where each session corresponds to each candle. One candle equals one day. In the middle, we have a weekly chart where each session is the last session of each week, which is usually Friday for the Nasdaq 100 futures contract. The levels and labels displayed correspond to the last session within each candle, which is the last day of each week. The levels and labels on the monthly chart correspond to the last session of each month, which is the last day of each month. 🔹 Gradient Style Traders can choose between two different color gradients for the session background. Each gradient provides different information about price behavior within each session. Horizontal: Green indicates prices at the top of the session range and red indicates prices at the bottom. Vertical: Green indicates prices that are equal to or greater than the open price and red indicates prices that are below the open price of the session. 🔶 SETTINGS 🔹 Dashboard Dashboard: Enable or disable the dashboard. Position: Select the location of the dashboard. Size: Select the dashboard size. 🔹 Style Bullish: Select a color for bullish sessions. Bearish: Select a color for bearish sessions. Transparency: Select a transparency level from 100 to 0. Gradient: Select a horizontal or vertical gradient.
Pine Script® Indikator
von LuxAlgo
15
VWAP Composites📊 VWAP Composite - Advanced Multi-Period Volume Weighted Average Price Indicator ═══════════════════════════════════════════════════════════════════ 🎯 OVERVIEW VWAP Composite is an advanced volume-weighted average price (VWAP) indicator that goes beyond traditional single-period VWAP calculations by offering composite multi-period analysis and unprecedented customization. This indicator solves a common problem traders face: traditional VWAP resets at arbitrary intervals (session start, day, week), but significant price action and volume accumulation often spans multiple periods. VWAP Composite allows you to anchor VWAP calculations to any timeframe—or combine multiple periods into a single composite VWAP—giving you a true representation of average price weighted by volume across the exact periods that matter to your analysis. ═══════════════════════════════════════════════════════════════════ ⚙️ HOW IT WORKS - CALCULATION METHODOLOGY 📌 CORE VWAP CALCULATION The indicator calculates VWAP using the standard volume-weighted formula: • Typical Price = (High + Low + Close) / 3 • VWAP = Σ(Typical Price × Volume) / Σ(Volume) This calculation is performed across user-defined time periods, ensuring each bar's contribution to the average is proportional to its trading volume. 📌 STANDARD DEVIATION BANDS The indicator calculates volume-weighted standard deviation to measure price dispersion around the VWAP: • Variance = Σ / Σ(Volume) • Standard Deviation = √Variance • Upper Band = VWAP + (StdDev × Multiplier) • Lower Band = VWAP - (StdDev × Multiplier) These bands help identify overbought/oversold conditions relative to the volume-weighted mean, with high-volume price excursions having greater impact on band width than low-volume moves. 📌 COMPOSITE PERIOD METHODOLOGY (Auto Mode) Unlike traditional VWAP that resets at fixed intervals, Auto Mode creates composite VWAPs by combining the current period with N previous periods: • Period Span = 1: Current period only (standard VWAP behavior) • Period Span = 2: Current period + 1 previous period combined • Period Span = 3: Current period + 2 previous periods combined • And so on... Example: A 3-period Weekly composite VWAP calculates from the start of 2 weeks ago through the current week's end, creating a single VWAP that represents 21 days of continuous price and volume data. This provides context about where price stands relative to the volume-weighted average over multiple weeks, not just the current week. ═══════════════════════════════════════════════════════════════════ 🔧 KEY FEATURES & ORIGINALITY ✅ DUAL OPERATING MODES 1️⃣ MANUAL MODE (5 Independent VWAPs) Define up to 5 separate VWAP calculations with custom start/end times: • Perfect for anchoring VWAP to specific events (earnings, Fed announcements, major reversals) • Each VWAP has independent color settings for lines and deviation band backgrounds • Individual control over calculation extension and visual extension (explained below) • Useful for tracking multiple institutional accumulation/distribution zones simultaneously 2️⃣ AUTO MODE (Composite Period VWAP) Automatically calculates VWAP across combined time periods: • Supported periods: Daily, Weekly, Monthly, Quarterly, Yearly • Configurable period span (1-20 periods) • Always up-to-date, recalculates on each new bar • Ideal for systematic analysis across consistent timeframes ✅ DUAL EXTENSION SYSTEM (Manual Mode Innovation) Most VWAP indicators only offer "on/off" for extending calculations. This indicator provides two distinct extension options: 🔹 EXTEND CALCULATION TO CURRENT BAR When enabled, continues including new bars in the VWAP calculation after the defined end time. The VWAP value updates dynamically as new volume enters the market. Use case: You anchored VWAP to a major low 3 weeks ago. You want the VWAP to continue evolving with new volume data to track ongoing institutional positioning. 🔹 EXTEND VISUAL LINE ONLY When enabled (and calculation extension is disabled), projects the "frozen" VWAP value forward as a reference line. The VWAP value remains fixed at what it was at the end time, but the line and deviation bands visually extend to current price. Use case: You want to see how price is behaving relative to the VWAP that existed at a specific point in time (e.g., "Where is price now vs. the 5-day VWAP that existed at last Friday's close?"). This dual system gives you unprecedented control over whether you're tracking a "living" VWAP that incorporates new data or using historical VWAP levels as static reference points. ✅ CUSTOMIZABLE STANDARD DEVIATION BANDS • Adjustable multiplier (0.1 to 5.0) • Independent background colors with opacity control for each VWAP • Dashed band lines for easy visual distinction from main VWAP • Bands extend when visual extension is enabled, maintaining zone visibility ✅ COMPREHENSIVE LABELING SYSTEM Each VWAP displays: • Current VWAP value • Upper deviation band value (High) • Lower deviation band value (Low) • Extension status indicator (Calc Extended / Visual Extended) • Color-coded for quick identification ═══════════════════════════════════════════════════════════════════ 📖 HOW TO USE THIS INDICATOR 🎯 SCENARIO 1: EVENT-ANCHORED VWAP (Manual Mode) Use case: A stock gaps down 15% on earnings and you want to track where institutions are positioning during the recovery. Setup: 1. Switch to Manual Mode 2. Enable VWAP 1 3. Set Start Time to the earnings gap bar 4. Set End Time to current time (or leave far in future) 5. Enable "Extend Calculation to Current Bar" 6. Watch how price respects the VWAP as a dynamic support/resistance Interpretation: • Price above VWAP = buyers in control since the event • Price testing VWAP from above = potential support • Volume-weighted standard deviation bands show normal price range • Price outside bands = potential exhaustion/mean reversion setup 🎯 SCENARIO 2: MULTI-WEEK INSTITUTIONAL ACCUMULATION ZONE (Auto Mode) Use case: You trade swing setups and want to identify where institutions have been accumulating over the past 3 weeks. Setup: 1. Switch to Auto Mode 2. Select "Weekly" period type 3. Set Period Span to 3 4. Enable standard deviation bands Interpretation: • 3-week composite VWAP shows the true average institutional entry • Price bouncing off VWAP repeatedly = strong support (institutions defending their average) • Price breaking below VWAP on high volume = potential distribution • Deviation bands contracting = consolidation; expanding = volatility increase 🎯 SCENARIO 3: COMPARING MULTIPLE TIME HORIZONS (Manual Mode) Use case: You want to see short-term vs medium-term vs long-term VWAP alignments. Setup: 1. Switch to Manual Mode 2. VWAP 1: Last 5 trading days (blue) 3. VWAP 2: Last 10 trading days (orange) 4. VWAP 3: Last 20 trading days (purple) 5. Enable "Extend Calculation" for all 6. Set different background colors for visual separation Interpretation: • All VWAPs aligned upward = strong trend across all timeframes • Price between VWAPs = finding equilibrium between different trader timeframes • Short-term VWAP crossing long-term VWAP = momentum shift • Price rejecting at higher-timeframe VWAP = that timeframe's traders defending their average 🎯 SCENARIO 4: HISTORICAL VWAP REFERENCE LEVELS (Manual Mode) Use case: You want to see where the 1-month VWAP was at each month-end as static reference levels. Setup: 1. Switch to Manual Mode 2. VWAP 1: Set to last month's start/end dates 3. VWAP 2: Set to 2 months ago start/end dates 4. VWAP 3: Set to 3 months ago start/end dates 5. Disable "Extend Calculation" 6. Enable "Extend Visual Line Only" Interpretation: • Each VWAP represents the volume-weighted average for that complete month • These become static support/resistance levels • Price returning to old monthly VWAPs = institutional memory/gap fill behavior • Useful for identifying longer-term value areas ═══════════════════════════════════════════════════════════════════ 🎨 CUSTOMIZATION OPTIONS GENERAL SETTINGS • Show/hide labels • Line style: Solid, Dashed, or Dotted • Standard deviation multiplier (impacts band width) • Toggle standard deviation bands on/off MANUAL MODE (Per VWAP) • Custom start and end times • Line color picker • Background color picker (with transparency control) • Extend calculation option • Extend visual option • Show/hide individual VWAPs AUTO MODE • Period type selection (Daily/Weekly/Monthly/Quarterly/Yearly) • Period span (1-20 periods) • Line color • Background color (with transparency control) ═══════════════════════════════════════════════════════════════════ 💡 TRADING APPLICATIONS ✓ Mean Reversion: Use deviation bands to identify stretched prices likely to return to VWAP ✓ Trend Confirmation: Price sustained above VWAP = bullish bias; below = bearish bias ✓ Support/Resistance: VWAP often acts as dynamic S/R, especially on higher volume periods ✓ Institutional Positioning: Multi-day/week VWAPs show where large players have established positions ✓ Entry Timing: Wait for pullbacks to VWAP in trending markets ✓ Stop Placement: Use VWAP ± standard deviation as volatility-adjusted stop levels ✓ Breakout Confirmation: Breakouts from consolidation with price reclaiming VWAP = stronger signal ✓ Multi-Timeframe Analysis: Compare short vs long-period VWAPs to gauge momentum alignment ═══════════════════════════════════════════════════════════════════ ⚠️ IMPORTANT NOTES • The indicator redraws on each bar to maintain accurate visual representation (uses `barstate.islast`) • Maximum lookback is limited to 5000 bars for performance optimization • Time range calculations work across all timeframes but are most effective on intraday to daily charts • Standard deviation bands assume volume-weighted distribution; extreme events may violate assumptions • Auto mode always calculates to current bar; use Manual mode for fixed historical periods ═══════════════════════════════════════════════════════════════════ This indicator is open-source. Feel free to examine the code, learn from it, and adapt it to your needs.
Pine Script® Indikator
von benb1122
DTR & ATR with live zonesThis indicator is designed to help traders gauge the day's volatility in real-time. It compares the current Daily True Range (DTR)—the distance between the session's high and low—to the historical Average True Range (ATR). The main purpose is to project potential price levels where the market might reach based on its average volatility. These levels (100% ATR, 150%, 200%, etc.) can be used as price targets. For instance, if you're in a long trade, you might consider taking partial or full profits as the price approaches these upper ATR extension levels. The indicator is highly customisable, allowing you to control the appearance of the ATR lines, zones, and labels to fit your charting preferences. Core Concepts: ATR and DTR To use this indicator effectively, it's important to understand its two main components: Average True Range (ATR): This is a classic technical analysis indicator that measures market volatility. It calculates the average range of price movement over a specific period (e.g., 14 days). A higher ATR means the price is, on average, moving more, while a low ATR indicates less volatility. This script uses a higher timeframe ATR (e.g., Daily) to establish a stable volatility baseline for the current trading day. Daily True Range (DTR): This is simply the difference between the current trading session's highest high and lowest low (session high - session low). It tells you how much the price has actually moved so far today. The indicator's logic revolves around comparing the live, unfolding DTR to the historical, baseline ATR. An on-screen table conveniently shows this comparison as a percentage, to show how volatile the day has been. How It Works: The Dynamic & Locked Mechanism The most clever part of this indicator is how it draws the ATR levels. It operates in two distinct phases during the trading session: Phase 1: Dynamic Expansion (Before DTR meets ATR) At the start of the session, the DTR is small. The indicator calculates the remaining range needed to "complete" the 100% ATR level (difference = avg_atr - dtr). It then adds this remaining amount to the session high and subtracts it from the session low. This creates a "floating" 100% ATR range that expands dynamically as the session high or low is extended. Phase 2: The Lock-in (After DTR meets or exceeds ATR) Once the day's range (DTR) becomes equal to or greater than the avg_atr, the day has met its "expected" volatility. At this point, the levels lock in place. The indicator intelligently determines the anchor point for the locked range. Once this primary 100% ATR range is established (either dynamically or locked), the script projects the other levels (150%, 200%, 250%, and 300%) by adding or subtracting multiples of the avg_atr from this base. How to Use It for Trading The primary use of this indicator is to set logical, volatility-based price targets. Setting Profit Targets: If you enter a long position, the upper ATR levels (100%, 150%, 200%) serve as excellent areas to consider taking profits. A move to the 200% or 250% level often signifies an overextended or "exhaustion" move, making it a high-probability exit zone. For short positions, the lower ATR levels serve the same purpose. Assessing Intraday Momentum: The on-screen table tells you how much of the expected daily range has been used. If it's early in the session and the DTR is only at 30% of the ATR, you can anticipate more significant price movement is likely to come. Conversely, if the DTR is already at 150% of ATR, the bulk of the day's move may already be complete. Mean Reversion Signals: If the price pushes to an extreme level (e.g., 250% ATR) and shows signs of stalling (e.g., bearish divergence on an oscillator), it could signal a potential reversal or pullback, offering an opportunity for a counter-trend trade. Key Settings ATR Length & Smoothing Type: These settings control how the baseline ATR is calculated. The default 14 period and RMA smoothing are standard, but you can adjust them to your preference. Session Settings: This is crucial. You must set the Market Session and Time Zone to match the primary trading hours of the asset you are analysing (e.g., "0930-1600" for the NYSE session). Show Lines / Show Labels / Show Zones: The script gives you full control over the visual display. You can toggle each ATR level's lines, labels, and background zones individually to avoid a cluttered chart and focus only on the levels that matter to your strategy.
Pine Script® Indikator
von Mereep01
11
Renko BandsThis is renko without the candles, just the endpoint plotted as a line with bands around it that represent the brick size. The idea came from thinking about what renko actually gives you once you strip away the visual brick format. At its core, renko is a filtered price series that only updates when price moves a fixed amount, which means it's inherently a trend-following mechanism with built-in noise reduction. By plotting just the renko price level and surrounding it with bands at the brick threshold distances, you get something that works like regular volatility bands while still behaving as a trend indicator. The center line is the current renko price, which trails actual price based on whichever brick sizing method you've selected. When price moves enough to complete a brick in the renko calculation, the center line jumps to the new brick level. The bands sit at plus and minus one brick size from that center line, showing you exactly how far price needs to move before the next brick would form. This makes the bands function as dynamic breakout levels. When price touches or crosses a band, you know a new renko brick is forming and the trend calculation is updating. What makes this cool is the dual-purpose nature. You can use it like traditional volatility bands where the outer edges represent boundaries of normal price movement, and breaks beyond those boundaries signal potential trend continuation or exhaustion. But because the underlying calculation is renko rather than standard deviation or ATR around a moving average, the bands also give you direct insight into trend state. When the center line is rising consistently and price stays near the upper band, you're in a clean uptrend. When it's falling and price hugs the lower band, downtrend. When the center line is flat and price is bouncing between both bands, you're ranging. The three brick sizing methods work the same way as standard renko implementations. Traditional sizing uses a fixed price range, so your bands are always the same absolute distance from the center line. ATR-based sizing calculates brick range from historical volatility, which makes the bands expand and contract based on the ATR measurement you chose at startup. Percentage-based sizing scales the brick size with price level, so the bands naturally widen as price increases and narrow as it decreases. This automatic scaling is particularly useful for instruments that move proportionally rather than in fixed increments. The visual simplicity compared to full renko bricks makes this more practical for overlay use on your main chart. Instead of trying to read brick patterns in a separate pane or cluttering your price chart with boxes and lines, you get a single smoothed line with two bands that convey the same information about trend state and momentum. The center line shows you the filtered trend direction, the bands show you the threshold levels, and the relationship between price and the bands tells you whether the current move has legs or is stalling out. From a trend-following perspective, the renko line naturally stays flat during consolidation and only moves when directional momentum is strong enough to complete bricks. This built-in filter removes a lot of the whipsaw that affects moving averages during choppy periods. Traditional moving averages continue updating with every bar regardless of whether meaningful directional movement is happening, which leads to false signals when price is just oscillating. The renko line only responds to sustained moves that meet the brick size threshold, so it tends to stay quiet when price is going nowhere and only signals when something is actually happening. The bands also serve as natural stop-loss or profit-target references since they represent the distance price needs to move before the trend calculation changes. If you're long and the renko line is rising, you might place stops below the lower band on the theory that if price falls far enough to reverse the renko trend, your thesis is probably invalidated. Conversely, the upper band can mark levels where you'd expect the current brick to complete and potentially see some consolidation or pullback before the next brick forms. What this really highlights is that renko's value isn't just in the brick visualization, it's in the underlying filtering mechanism. By extracting that mechanism and presenting it in a more traditional band format, you get access to renko's trend-following properties without needing to commit to the brick chart aesthetic or deal with the complications of overlaying brick drawings on a time-based chart. It's renko after all, so you get the trend filtering and directional clarity that makes renko useful, but packaged in a way that integrates more naturally with standard technical analysis workflows.
Pine Script® Indikator
von The_Peaceful_Lizard
37
3/4-Bar GRG / RGR Pattern (Conditional 4th Candle)This indicator can be used to identify the Green-Red-Green or Red-Green-Red pattern. It is a price action indicator where a price action which identifies the defeat of buyers and sellers. If the buyers comprehensively defeat the sellers then the price moves up and if the sellers defeat the buyers then the price moves down. In my trading experience this is what defines the price movement. It is a 3 or 4 candle pattern, beyond that i.e, 5 or more candles could mean a very sideways market and unnecessary signal generation. How does it work? Upside/Green signal Say candle 1 is Green, which means buyers stepped in, then candle 2 is Red or a Doji, that means sellers brought the price down. Then if candle 3 is forming to be Green and breaks the closing of the 1st candle and opening of the 2nd candle, then a green arrow will appear and that is the place where you want to take your trade. Here the buyers defeated the sellers. Sometimes candle 3 falls short but candle 4 breaks candle 1's closing and candle 2's opening price. We can enter on candle 4. Important - We need to enter the trade as soon as the price moves above the candle 1 and 2's body and should not wait for the 3rd or 4th candle to close. Ignore wicks. I have restricted it to 4 candles and that is all that is needed. More than that is a longer sideways market. I call it the +-+ or GRG pattern. Stop loss can be candle 2's mid for safe traders (that includes me) or candle 2's body low for risky traders. Back testing suggests that body low will be useless and result in more points in loss because for the bigger move this point will not be touched, so why not get out faster. Downside/Red signal Say candle 1 is Red, which means sellers stepped in, then candle 2 is Green or a Doji, that means buyers took the price up. Then if candle 3 is forming to be Red and breaks the closing of the 1st candle and opening of the 2nd candle then a Red arrow will appear and that is the place where you want to take your trade. Sometimes candle 3 falls short but candle 4 breaks candle 1's closing and candle 2's opening price. We can enter on candle 4. We need to enter the trade as soon as the price moves below the candle 1 and 2's body and should not wait for the 3rd or 4th candle to close. I have restricted it to 4 candles and that is all that is needed. More than that is a longer sideways market. I call it the -+- or RGR pattern. Stop loss can be candle 2's mid for safe traders ( that includes me) or candle 2's body high for risky traders. Back testing suggests that body high will be useless and result in more points in loss because for the bigger move this point will not be touched, so why not get out faster. Important Settings You can enable or disable the 4th candle signal to avoid the noise, but at times I have noticed that the 4th candle gives a very strong signal or I can say that the strong signal falls on the 4th candle. This is mostly a coincidence. You can also configure how many previous bars should the signal be generated for. 10 to 30 is good enough. To backtest increase it to 2000 or 5000 for example. Rest are self explanatory. Pointers If after taking the trade, the next candle moves in your direction and closes strong bullish or bearish, then move SL to break even and after that you can trail it. If a upside trade hits SL and immediately a down side trade signal is generated on the next candle then take it. Vice versa is true. Trades need to be taken on previous 2 candle's body high or low combined and not the wicks. The most losses a trader takes is on a sideways day and because in our strategy the stop loss is so small that even on a sideways day we'll get out with a little profit or worst break even. Hold targets for longer targets and don't panic. If last 3-4 days have been sideways then there is a good probability that day will be trending so we can hold our trade for longer targets. Target to hold the trade for whole day and not exit till the day closes. In general avoid trading in the middle of the day for index and stocks. Divide the day into 3 parts and avoid the middle. Use Support/Resistance, 10, 20, 50, 200 EMA/SMA, Gaps, Whole/Round numbers(very imp) for identifying targets. Trail your SL. For indexes I would use 5 min and 15 min timeframe. For commodities and crypto we can use higher timeframe as well. Look for signals during volatile time durations and avoid trading the whole day. Signal usually gives good targets on those times. If a GRG or RGR pattern appears on a daily timeframe then this is our time to go big. Minimum Risk to Reward should be 1:2 and for longer targets can be 1:4 to 1:10. Trade with small lot size. Money management will happen automatically. With small lot size and correct Risk-Re ward we can be very profitable. Don't trade with big lot size. Stay in the market for longer and collect points not money. Very imp - Watch market and learn to generate a market view. Very imp - Only 4 candles are needed in trading - strong bullish, strong bearish, hammer, inverse hammer and doji. Go big on bearish days for option traders. Puts are better bought and Calls are better sold. Cluster of green signals can lead to bigger move on the upside and vice versa for red signals. Most of this is what I learned from successful traders (from the top 2%) only the indicator is mine.
Pine Script® Indikator
von pranayjha
28
Total Points Range by exp3rtsThis indicator measures and displays the true intraday movement of a market by approximating tick-level activity using 1-second data aggregation. Instead of only looking at net candle movement, it sums every price change during a session, giving traders a more accurate picture of market effort and volatility. Total Points Moved (TPM) – Captures the full distance traveled by price, not just the net gain/loss. Bullish vs. Bearish Movement – Separates upward and downward moves so you can see who dominated the session. Custom Sessions – Define your own session start/end times and time zone for precise tracking. End-of-Session Summary – Automatically plots a label at session completion with totals for TPM, bullish, and bearish movement. Visual Session Highlighting – Background shading makes it easy to see when the chosen session is active. This tool is useful for: Understanding the true effort vs. result of price movement Comparing volatility across sessions Identifying whether bulls or bears contributed more to market swings Supporting order flow and tick-based trading strategies
Pine Script® Indikator
von exp3rts
Time Range by exp3rtsTime Window highlights a custom time range directly on your chart, helping you focus on specific market sessions or trading hours. Key Features: Highlights a custom time range with a shaded background Fully adjustable start and end time (hour & minute) Supports multiple time zones (e.g., GMT, UTC, Europe/Berlin) Optional market color shading inside the window (bull/bear neutral tone) Use Cases: Mark London Open, New York Session, or any session overlap Focus on high-probability trading hours Visualize your backtesting timeframe or algo activity window Track premarket or after-hours activity for futures or indices Customization: Set the beginning and end time in your local or exchange time zone Choose your timezone string (e.g., "GMT", "Etc/UTC", "America/New_York") Automatically colors candles in the time window for easy visibility
Pine Script® Indikator
von exp3rts
Atlantean Sideways / Range Regime DetectorPurpose When using trend based indicators, you can skip the false signals when there is a sideways action, protecting you from the false signals. Flags likely sideways/range phases using three checks: Weak trend (ADX from DMI) Price compression (Bollinger Band Width, normalized) Low volatility (NATR = ATR/Price%) Logic isSideways = (ADX < adxThresh) AND (bbNorm < 0.25) AND (NATR < natrMax) When true: bars + background turn teal and a provisional Range High/Low (rolling rangeWin) is drawn. Key Inputs DMI: diLen(22) Optimized for 15 mins Bitcoin, could change it to 14 for more general approach ADX: adxSmooth(14), adxThresh(18) Volatility: lenATR(14), natrMax(1.8) Visuals: rangeWin(20), bar/range toggles Quick Tuning More signals: raise adxThresh to 20–25, raise natrMax to 2.5–4.0, increase BB cutoff by editing bbNorm < 0.25 --> 0.35–0.50. Smoother range lines: increase rangeWin to 30–40. Use Cases Mean reversion inside teal ranges. Breakout prep when price closes outside the drawn range after teal ends. Could be used as a signal although not suggested. Filter trend systems: skip trades when sidewaysCond is true. This is the main purpose, for it to be combined with trend based indicators, like Supertrend. Alert “Sideways Detected” triggers when isSideways is true. Script could be expanded upon your requests.
Pine Script® Indikator
von Atlantean_Trade
Opening Candle Zone with ATR Bands by nkChartsThis indicator highlights the opening range of each trading session and projects dynamic ATR-based zones around it. Key Features Plots high and low levels of the opening candle for each new daily session. Extends these levels across the session, providing clear intraday support and resistance zones. Adds ATR-based offset bands above and below the opening range for volatility-adjusted levels. Customizable colors, ATR length, and multiplier for flexible use across markets and timeframes. Adjustable session history limit to control how many past levels remain on the chart. How to Use: The opening range high/low often acts as strong intraday support or resistance. The ATR bands give an adaptive volatility buffer, useful for breakout or mean-reversion strategies. Works on any market with clear session opens. This tool is designed for traders who want to combine session-based price action with volatility insights, helping identify potential breakouts, reversals, or consolidation areas throughout the day. ⚠️ Disclaimer: This indicator is for educational purposes only. It does not provide financial advice or guarantee profits. Always perform your own analysis before making trading decisions.
Pine Script® Indikator
von nkCharts
88-Key Piano Range - Musical Price Levels88-Key Piano Range - Musical Price Levels Description: Explore price analysis through musical harmony! This educational indicator maps price movements to the standard 88-key piano keyboard (A0 to C8), offering a creative way to visualize market ranges and explore harmonic price relationships with authentic keyboard-style background fills. 🎹 KEY FEATURES: • Complete 88-Key Mapping - Full piano range from A0 to C8 mapped to your price range • Piano-Style Visual Design - Clean background fills distinguishing white keys, black keys, and octaves • Dual Anchor System - Set two time/price points to define your analytical range • Flexible Display Options - Show all 88 keys, octaves only (C notes), or custom selections • Harmonic Exploration - Explore consonant/dissonant key relationships based on music theory • Real-time Price Note - See what musical note your current price represents • Customizable Interface - Adjust colors, line widths, fills, and visual elements 🎵 EDUCATIONAL CONCEPTS: • Octave Levels - C notes as harmonic reference points (similar to round numbers) • Key Classifications - Natural notes (white keys) vs chromatic notes (black keys) • Harmonic Intervals - Musical relationships applied to price analysis • Creative Visualization - Alternative way to view price ranges and movements ⚙️ HOW TO USE: 1. Select Your Price Leg - Choose an upleg, downleg, or significant price movement to explore 2. Set Anchor A - Place at the start of your selected leg (swing low for upleg, swing high for downleg) 3. Set Anchor B - Place at the end of your selected leg (swing high for upleg, swing low for downleg) 4. Configure Display - Select all keys, octaves only, or enable background fills 5. Explore Harmonics - Enable harmony coloring to see musical relationships 6. Study Patterns - Observe how price movements align with musical intervals 🎼 CREATIVE APPLICATIONS: • Experimental Analysis - Try a musical approach to leg analysis • Educational Tool - Learn about mathematical relationships in both music and markets • Alternative Perspective - View support/resistance through a musical lens • Pattern Recognition - Explore if harmonic levels show interesting price behavior • Fun Learning - Combine musical knowledge with trading concepts 📊 EXPERIMENTAL USE: • Creative alternative to traditional Fibonacci levels • Educational exploration of mathematical harmony in markets • Interesting way to visualize price ranges and retracements • Novel approach for musicians interested in trading concepts Important Note: This is an educational and experimental tool that applies musical theory concepts to price analysis. It should be used for learning and exploration purposes alongside proven technical analysis methods. The musical relationships are mathematically based but not validated as reliable trading signals.
Pine Script® Indikator
von geneclash
2