Auf geht's

Indikatoren und Strategien

Hybrid Strategy: Trend/ORB/MTFHybrid Strategy: Trend + ORB + Multi-Timeframe Matrix This script is a comprehensive "Trading Manager" designed to filter out noise and identify high-probability breakout setups. It combines three powerful concepts into a single, clean chart interface: Trend Alignment, Opening Range Breakout (ORB), and Multi-Timeframe (MTF) Analysis. It is designed to prevent "analysis paralysis" by providing a unified Dashboard that confirms if the trend is aligned across 5 different timeframes before you take a trade. How it Works The strategy relies on the "Golden Trio" of confluence: 1. Trend Definition (The Setup) Before looking for entries, the script analyzes the immediate trend. A bullish trend is defined as: Price is above the Session VWAP. The fast EMA (9) is above the slow EMA (21). (The inverse applies for bearish trends). 2. The Signal (The Trigger) The script draws the Opening Range (default: first 15 minutes of the session). Buy Signal: Price breaks above the Opening Range High while the Trend is Bullish. Sell Signal: Price breaks below the Opening Range Low while the Trend is Bearish. 3. The Confirmation (The Filter) A signal is only valid if the Higher Timeframe (default: 60m) agrees with the direction. If the 1m chart says "Buy" but the 60m chart is bearish, the signal is filtered out to prevent false breakouts. Key Features The Matrix Dashboard A zero-lag, real-time table in the corner of your screen that monitors 5 user-defined timeframes (e.g., 5m, 15m, 30m, 60m, 4H). Trend: Checks if Price > EMA 21. VWAP: Checks if Price > VWAP. ORB: Checks if Price is currently above/below the Opening Range of that session. D H/L: Warns if price is near the Daily High or Low. PD H/L: Warns if price is near the Previous Daily High or Low. Visual Order Blocks The script automatically identifies valid Order Blocks (sequences of consecutive candles followed by a strong explosive move). Chart: Draws Green/Red zones extending to the right, showing where price may react. Dashboard: Displays the exact High, Low, and Average price of the most recent Order Blocks for precision planning. Risk Management (Trailing Stop) Once a trade is active, the script plots Chandelier Exit dots (ATR-based trailing stop) to help you manage the trade and lock in profits during trend runs. Visual Guide (Chart Legend) ⬜ Gray Box: Represents the Opening Range (first 15 minutes). This is your "No Trade Zone." Wait for price to break out of this box. 🟢 Green Line: The Opening Range High. A break above this line signals potential Bullish momentum. 🔴 Red Line: The Opening Range Low. A break below this line signals potential Bearish momentum. 🟢 Green / 🔴 Red Zones (Boxes): These are Order Blocks. 🟢 Green Zone: A Bullish Order Block (Demand). Expect price to potentially bounce up from here. 🔴 Red Zone: A Bearish Order Block (Supply). Expect price to potentially reject down from here. ⚪ Dots (Trailing Stop): 🟢 Green Dots: These appear below price during a Bullish trend. They represent your suggested Stop Loss. 🔴 Red Dots: These appear above price during a Bearish trend. 🏷️ Buy / Sell Labels: BUY: Triggers when Price breaks the Green Line + Trend is Bullish + HTF is Bullish. SELL: Triggers when Price breaks the Red Line + Trend is Bearish + HTF is Bearish. Settings Session: Customizable RTH (Regular Trading Hours) to filter out pre-market noise. Matrix Timeframes: 5 fixed slots to choose which timeframes you want to monitor. Order Blocks: Adjust the sensitivity and lookback period for Order Block detection. Risk: Customize the ATR multiplier for the trailing stop. Disclaimer This tool is for educational purposes only. Past performance does not guarantee future results. Always manage your risk properly.
Pine Script® Indikator
von EliasVictor
GARCH Adaptive Volatility & Momentum Predictor 💡 I. Indicator Concept: GARCH Adaptive Volatility & Momentum Predictor ----------------------------------------------------------------------------- The GARCH Adaptive Momentum Speed indicator provides a powerful, forward-looking view on market risk and momentum. Unlike standard moving averages or static volatility indicators (like ATR), GARCH forecasts the Conditional Volatility (σ_t) for the next bar, based on the principle of volatility clustering. The indicator consists of two essential components: 1. GARCH Volatility (Level): The primary forecast of the expected magnitude of price movement (risk). 2. Vol. Speed (Momentum): The first derivative of the GARCH forecast, showing whether market risk is accelerating or decelerating. This component is the main visual signal, displayed as a dynamic histogram. ⚙️ II. Key Features and Adaptive Logic ----------------------------------------------------------------------------- * Dynamic Coefficient Adaptation: The indicator automatically adjusts the GARCH coefficients (α and β) based on the chart's timeframe (TF): - Intraday TFs (M1-H4): Uses higher α and lower β for quicker reaction to recent shocks. - Daily/Weekly TFs (D, W): Uses lower α and higher β for a smoother, more persistent long-term forecast. * Momentum Visualization: The Vol. Speed component is plotted as a dynamic histogram (fill) that automatically changes color based on the direction of acceleration (Green for up, Red for down). 📊 III. Interpretation Guide ----------------------------------------------------------------------------- - GARCH Volatility (Blue Line): The predicted level of market risk. Use this to gauge overall position sizing and stop loss width. - Vol. Speed (Green Histogram): Momentum is ACCELERATING (Risk is increasing rapidly). A strong signal that momentum is building, often preceding a breakout. - Vol. Speed (Red Histogram): Momentum is DECELERATING (Risk is contracting). Indicates momentum is fading, often associated with market consolidation. 🎯 IV. Trading Application ----------------------------------------------------------------------------- - Breakout Timing: Look for a strong, high GREEN histogram bar. This suggests the volatility pressure is increasing rapidly, and a breakout may be imminent. - Consolidation: Small, shrinking RED histogram bars signal that market energy is draining, ideal for tight consolidation patterns.
Pine Script® Indikator
von s_d_t
FX Session High/Low Bands - Last 5 EST Days FX Session High/Low Bands - Last 5 Days Description: This indicator plots horizontal bands representing the high and low price levels from the major forex trading sessions over the last 5 days. It helps traders identify key support and resistance zones based on recent session activity. Features: Multiple Session Tracking: Displays high/low levels for major FX sessions: Asian Session (Tokyo) European Session (London) US Session (New York) 5-Day Lookback: Captures the highest high and lowest low from each session over the previous 5 trading days Visual Bands: Clear horizontal lines or filled zones showing session boundaries Dynamic Updates: Automatically recalculates as new session data becomes available How to Use: Support/Resistance: Previous session highs/lows often act as key price levels Breakout Trading: Watch for price breaking above/below session bands Range Trading: Trade within the bands during consolidation periods Session Overlap: Pay attention to multiple session bands converging Ideal For: Forex day traders Session-based trading strategies Support/resistance identification Multi-timeframe analysis
Pine Script® Indikator
von drlicht1
NY LONDON LUNCH AUTO**NY London Lunch Auto** is a precision session-anchor indicator designed for traders who focus on institutional timing and liquidity behavior. This script automatically marks the **high and low of three key 15-minute New York session candles**: • **3:00 AM NY** — London session expansion • **8:00 AM NY** — New York open / kill zone • **2:00 PM NY** — NY lunch / power hour transition Each time one of these candles prints on the **15-minute chart**, the script captures its exact high and low and extends them forward as horizontal levels. The levels remain **locked and unchanged** until the next key session candle appears, ensuring clean, non-repainting reference zones. ### Key Features • Works **exclusively on the 15-minute timeframe** • Automatically updates at **3AM, 8AM, and 2PM NY time** • Levels stay fixed — no drifting or recalculation • Clean, minimal design with customizable colors • Ideal for liquidity sweeps, displacement, and ICT-style execution models This indicator is built for traders who want **clarity, patience, and structure**, not clutter. It pairs seamlessly with liquidity sweep, displacement, and fair value gap strategies.
Pine Script® Indikator
von wilsonne14
Timeframe Overlay 24HrDaily High–Low Box (00:00–23:59) This indicator highlights each trading day with a shaded box spanning from 00:00 to 23:59 (based on the selected timezone) and covering the day’s highest and lowest price. • Green box when the day closes above its open • Red box when the day closes below its open • Historical days are fully drawn for easy comparison • Current day box builds dynamically as new candles form Useful for visualising daily range, market bias, and intraday structure across all timeframes.
Pine Script® Indikator
von Knotty0807
MA20 ATR Trend Failure FilterA volatility-adaptive filter designed to identify early trend invalidation. This indicator combines a 20-period Moving Average (MA20) with Average True Range (ATR) to dynamically define a lower volatility boundary. When price closes below this boundary, it signals that the current trend is no longer valid and risk is increasing. Core Concept（核心思想） MA defines the trend baseline ATR measures current market volatility MA − k × ATR forms a dynamic risk threshold A close below this threshold = trend failure 👉 中文补充： 这不是反转指标，而是趋势失效过滤器，用于避免在趋势已经被破坏后继续持仓或加仓。 How It Works Calculate MA20 as the trend reference Calculate ATR(14) as volatility proxy Build adaptive bands: Upper Band = MA20 + k × ATR Lower Band = MA20 − k × ATR If close < Lower Band, trend is considered failed The ATR multiplier k automatically adjusts the tolerance based on volatility, avoiding rigid fixed-percentage rules. Visual Elements Yellow line: MA20 Green band: MA20 + k × ATR Red band: MA20 − k × ATR (key risk boundary) Red triangle + “FAIL” label: Trend failure signal Optional background shading to highlight risk zones Typical Use Cases Trend-following strategies (exit / reduce exposure) Breakout strategies (filter false continuation) Risk management overlay (non-intrusive, no repaint) Combine with HMA, SuperTrend, structure-based entries 👉 中文补充： 非常适合作为**“不该再拿”的客观判断条件**，而不是频繁交易信号。 Why This Indicator Volatility-adaptive (ATR-based) No future data, no repaint Simple logic, strong risk control Works across stocks, crypto, futures, indices This tool is designed to answer one question only: Is the current trend still valid? Parameters MA Length (default: 20) ATR Length (default: 14) ATR Multiplier k (default: 0.8) Lower k → stricter risk control Higher k → more tolerance, fewer false signals SSE:600595
Pine Script® Indikator
von LuckyFirst
Rainbow MA Cloud█ OVERVIEW Rainbow MA Cloud displays 8 Moving Averages as a gradient-colored cloud to visualize trend direction and strength. The "rainbow" effect shows momentum through ribbon width, while perfect MA alignment signals strong trending conditions. █ CONCEPTS The indicator uses 8 MAs with Fibonacci-based default lengths (8, 13, 21, 34, 55, 89, 144, 233) to create a layered view of price momentum across multiple timeframes. Perfect Alignment Detection: • Bullish Alignment — All 8 MAs in ascending order (MA1 > MA2 > ... > MA8) Indicates strong uptrend with momentum across all timeframes • Bearish Alignment — All 8 MAs in descending order (MA1 < MA2 < ... < MA8) Indicates strong downtrend with aligned selling pressure • Mixed — MAs are not in sequential order, suggesting consolidation or transition Ribbon Width: • Widening ribbon = Trend acceleration, increasing momentum • Narrowing ribbon = Trend weakening, potential reversal or consolidation █ FEATURES 1 — MA Configuration Choose from EMA, SMA, WMA, VWMA, or HMA calculation methods. All 8 MA lengths are fully customizable. 2 — Color Themes Five built-in themes: Rainbow, Warm, Cool, Neon, Mono. Creates visually distinct gradient from fast to slow MAs. 3 — Alignment Background Green background during bullish alignment. Red background during bearish alignment. Helps quickly identify strong trending periods. 4 — Trend Signals Labels appear when perfect alignment forms. "BULL ALIGN" for bullish, "BEAR ALIGN" for bearish. 5 — Information Panel Real-time display of alignment status, trend strength percentage, ribbon width, price position relative to cloud, and MA values. █ HOW TO USE Entry Signals: • Look for alignment signals (BULL/BEAR ALIGN) as trend confirmation • Enter long when bullish alignment forms with price above cloud • Enter short when bearish alignment forms with price below cloud Trend Following: • Stay in position while alignment background color persists • Widening ribbon confirms trend continuation • Exit or reduce when alignment breaks (background disappears) Support/Resistance: • Cloud edges act as dynamic support (bullish) or resistance (bearish) • Price entering cloud suggests consolidation or potential reversal █ LIMITATIONS • Alignment signals are lagging by nature (based on MA crossovers) • Works best on trending markets; generates mixed signals during ranging periods • Ribbon width measurement uses outer MAs only (MA1 vs MA8) █ COMPANION INDICATOR Use "Rainbow MA Width" indicator for detailed Z-Score analysis of ribbon expansion/contraction patterns.
Pine Script® Indikator
von viva_lee
3SPC Three Candle Price Action Setup3SPC (Three Candle Price Action Setup) is an open-source indicator designed to detect a simple and clearly defined three-candle price action pattern. The logic is based on the following structure: • The first two candles move in the same direction (bullish or bearish). • The third candle interacts with the real bodies of both previous candles, which may indicate a short-term liquidity sweep or price reaction. • A bullish setup is confirmed when price holds above the open of the first candle. • A bearish setup is confirmed when price holds below the open of the first candle. This script does not use oscillators or lagging indicators. It is intended as a visual aid for discretionary traders and should be used together with market context, risk management and higher timeframe analysis. The script is published as open-source for educational and transparency purposes. UI Labels Translation: - نمایش ستاپ صعودی: Show bullish setups - نمایش ستاپ نزولی: Show bearish setups
Pine Script® Indikator
von KittipathSukkho
Index Construction Tool🙏🏻 The most natural mathematical way to construct an index || portfolio, based on contraharmonic mean || contraharmonic weighting. If you currently traded assets do not satisfy you, why not make your own ones? Contraharmonic mean is literally a weighted mean where each value is weighted by itself. ... Now let me explain to you why contraharmonic weighting is really so fundamental in two ways: observation how the industry (prolly unknowably) converged to this method, and the real mathematical explanation why things are this way. How it works in the industry. In indexes like TVC:SPX or TVC:DJI the individual components (stocks) are weighted by market capitalization. This market cap is made of two components: number of shares outstanding and the actual price of the stock. While the number of shares holds the same over really long periods of time and changes rarely by corporate actions , the prices change all the time, so market cap is in fact almost purely based on prices itself. So when they weight index legs by market cap, it really means they weight it by stock prices. That’s the observation: even tho I never dem saying they do contraharmonic weighting, that’s what happens in reality. Natural explanation Now the main part: how the universe works. If you build a logical sequence of how information ‘gradually’ combines, you have this: Suppose you have the one last datapoint of each of 4 different assets; The next logical step is to combine these datapoints somehow in pairs. Pairs are created only as ratios , this reveals relationships between components, this is the only step where these fundamental operations are meaningful, they lose meaning with 3+ components. This way we will have 16 pairs: 4 of them would be 1s, 6 real ratios, and 6 more inverted ratios of these; Then the next logical step is to combine all the pairs (not the initial single assets) all together. Naturally this is done via matrices, by constructing a 4x4 design matrix where each cell will be one of these 16 pairs. That matrix will have ones in the main diagonal (because these would be smth like ES/ES, NQ/NQ etc). Other cells will be actual ratios, like ES/NQ, RTY/YM etc; Then the native way to compress and summarize all this structure is to do eigendecomposition . The only eigenvector that would be meaningful in this case is the principal eigenvector, and its loadings would be what we were hunting for. We can multiply each asset datapoint by corresponding loading, sum them up and have one single index value, what we were aiming for; Now the main catch: turns out using these principal eigenvector loadings mathematically is Exactly the same as simply calculating contraharmonic weights of those 4 initial assets. We’re done here. For the sceptics, no other way of constructing the design matrix other than with ratios would result in another type of a defined mean. Filling that design matrix with ratios Is the only way to obtain a meaningful defined mean, that would also work with negative numbers. I’m skipping a couple of details there tbh, but they don’t really matter (we don’t need log-space, and anyways the idea holds even then). But the core idea is this: only contraharmonic mean emerges there, no other mean ever does. Finally, how to use the thing: Good news we don't use contraharmonic mean itself because we need an internals of it: actual weights of components that make this contraharmonic mean, (so we can follow it with our position sizes). This actually allows us to also use these weights but not for addition, but for subtraction. So, the script has 2 modes (examples would follow): Addition: the main one, allows you to make indexes, portfolios, baskets, groups, whatever you call it. The script will simply sum the weighted legs; Subtraction: allows you to make spreads, residual spreads etc. Important: the script will subtract all the symbols From the first one. So if the first we have 3 symbols: YM, ES, RTY, the script will do YM - ES - RTY, weights would be applied to each. At the top tight corner of the script you will see a lil table with symbols and corresponding weights you wanna trade: these are ‘already’ adjusted for point value of each leg, you don’t need to do anything, only scale them all together to meet your risk profile. Symbols have to be added the way the default ones are added, one line : one symbol. Pls explore the script’s Style setting: You can pick a visualization method you like ! including overlays on the main chart pane ! Script also outputs inferred volume delta, inferred volume and inferred tick count calculated with the same method. You can use them in further calculations. ... Examples of how you can use it ^^ Purple dotted line: overlay from ICT script, turned on in Style settings, the contraharmonic mean itself calculated from the same assets that are on the chart: CME_MINI:RTY1! , CME_MINI:ES1! , CME_MINI:NQ1! , CBOT_MINI:YM1! ^^ precious metals residual spread ( COMEX:GC1! COMEX:SI1! NYMEX:PL1! ) ^^ CBOT:ZC1! vs CBOT:ZW1! grain spread ^^ BDI (Bid Dope Index), constructed from: NYSE:MO , NYSE:TPB , NYSE:DGX , NASDAQ:JAZZ , NYSE:IIPR , NASDAQ:CRON , OTC:CURLF , OTC:TCNNF ^^ NYMEX:CL1! & ICEEUR:BRN1! basket ^^ resulting index price, inferred volume delta, inferred volume and inferred tick count of CME_MINI:NQ1! vs CME_MINI:ES1! spread ... Synthetic assets is the whole new Universe you can jump into and never look back, if this is your way ... ∞
Pine Script® Indikator
von gorx1
DZDZ – Pivot Demand Zones + Trend Filter + Breadth Override + SL is a structured accumulation indicator built to identify high-probability demand areas after valid pullbacks. The script creates **Demand Zones (DZ)** by pairing **pivot troughs (local lows)** with later **pivot peaks (local highs)**, requiring a minimum **ATR (Average True Range)** gap to confirm real price displacement. Zones are drawn only when market structure confirms strength through a **trend filter** (a required number of higher highs over a recent window) or a **breadth override**, which activates after unusually large expansion candles measured as a percentage move from the prior close. In addition to pivots, the script detects **coiling price action**—tight trading ranges contained within an ATR band—and treats these as alternative demand bases. Entries require price to penetrate a defined depth into the zone, preventing shallow reactions. After the first valid entry, a **DCA (Dollar-Cost Averaging)** system adds buys every 10 bars while trend or breadth conditions persist. A **ratcheting SL (Stop-Loss)** tightens upward only, using demand structure or ATR when zones are unavailable. The focus is disciplined, volatility-aware accumulation aligned with structure.
Pine Script® Indikator
von Gechwindigkeitsbegrendsung
MP SESSIONS, DST, OTTMP SESSIONS, DST, OTT – What this indicator does This script is a multi-session market timing tool that: Draws full trading sessions on the chart (Asia, Sydney, Tokyo, Shanghai, Europe, London, New York, NYSE) Automatically adjusts for Daylight Saving Time (DST) for Sydney, London, and New York Shows a live info table with session times, DST status, and whether each session is currently open or closed Adds optional custom “OTT” vertical lines at user-defined intraday times (for your own models, killzones, or time blocks) Main Features (high level) 1. Market mode & time zone handling Market Mode: Forex Stock User Custom (you type your own session ranges) TFlab suggestion (predefined “optimized” session times) Time Zone Mode: UTC Session Local Time (local exchange time: Sydney, Tokyo, London, New York etc.) Your Time Zone (converts to the user-selected TZ, e.g. UTC-4:00) Handles separate time zones for: Asia, Sydney, Tokyo, Shanghai, Europe, London, New York, NYSE Has logic to recalculate session start/end depending on DST and the chosen mode. 2. Daylight Saving Time (DST) engine The function DST_Detector: Calculates when DST starts and ends for: Australia/Sydney Europe/London America/New_York Detects the correct Sunday (2nd, 4th, etc.) for start/end using day-of-week and week counts. Returns 'Active' or 'Inactive' for each region. These values are then used to shift the sessions (e.g. New York 13:00–21:00 vs 12:00–20:00 in UTC). The script can also draw vertical lines on the chart when DST starts/ends and label them: “Sydney DST Started / Ended” “London DST Started / Ended” “New York DST Started / Ended” 3. Session timing & sessions on the chart The function Market_TimeZone_Calculator: Based on Market Mode + Time Zone Mode + DST state, it returns: Time ranges for: Sydney, Tokyo, Shanghai, Asia (combined), Europe, London, New York, NYSE These ranges are in "HHMM-HHMM" format. Then the script: Converts these to time() conditions using the proper time zone Creates boolean series like On_sesAsia, On_sesEurope, On_sesNewYork, etc., which are 1 when the session is open and 0 when closed. 4. Session high/low boxes & labels The function LowHighSessionDetector: Tracks high and low of each session while it’s active. When a new session starts: Resets and starts recording the session high/low. While session is active: Updates High with the max of current bar high and previous session high. Updates Low with the min of current bar low and previous session low. When the session is "on": Draws a box from session low to high (box.new) and extends it to the right as long as the session continues. Places a label with session name (Asia, London, New York, etc.) near the high: Style depends on the session (down/right/left). You have visibility toggles per session: Asia Session, Sydney Session, Tokyo Session, Shanghai Session, Europe Session, London Session, New York Session, NYSE (for TFlab mode). So you visually see: A shaded box for each session The full H/L range for that session A text label with the session name. 5. Info table The indicator builds a table in a corner of the chart showing: Header: “FOREX Session”, “Stock Market Trading Hours”, “User Custom Session”, or “TFlab suggestion” depending on mode. Columns: Session name (Asia, Sydney, Tokyo, Shanghai, Europe, London, New York, NYSE) DST status for that region (“Active 🌞 / Inactive 🍂 / Not Observed”) Session start time Session end time Current status (“Open / Closed”, with green/red background) The function SplitFunction: Parses the "HHMM-HHMM" strings for each session. Converts them into: Either raw times (if viewing in UTC/session local) Or converted times in Your Time Zone using timestamp and hour/ minute with YourTZ. Returns formatted Start and End strings like 9:30, 13:00, etc. So the table is effectively a live session schedule that: Auto-adjusts to DST Can show times in your own time zone Shows which session is open right now. 6. OTT vertical lines (custom intraday markers) At the bottom, there is an OTT section which lets you draw up to three sets of vertical lines at specific times: Each OTT block has: Enable toggle (Enable OTT 1/2/3) Start hour & minute End hour & minute Color Global OTT settings: Line style: Solid / Dashed / Dotted Line width Toggle: “Show OTT Labels?” Logic: is_ott_time() checks if current bar’s hour and minute match the OTT input time. draw_ott(): When the bar time matches, draws a vertical line through the candle from low to high (extend.both). Optionally adds a label above the bar, like "OTT1 Start", "OTT1 End", etc. Use cases: Marking open/close of your trading session Defining killzones, news times, or custom model windows Visual anchors for your intraday routine (NY open, 10 AM candle, etc.)
Pine Script® Indikator
von markoparkhomenko
Advanced Rainbow EMA + SMMA SystemAdvanced Rainbow EMA + SMMA System This custom indicator overlays eight rainbow‑colored EMAs (20, 25, 30, 35, 40, 45, 50, 55) together with two Smoothed Moving Averages (SMMA 50 in white, SMMA 200 in red). Features: 🌈 Rainbow EMAs: Smooth gradient from yellow → gold → orange → dark orange → tomato → crimson → red → blue, showing short‑ to medium‑term momentum. ⚪🔴 Smoothed Moving Averages: Thick white SMMA (50) and thick red SMMA (200) for long‑term trend context. 🟩🟥 Background shading: Green when EMAs align bullish and SMMA 50 > SMMA 200, red when bearish. 📈📉 Signal arrows: “BUY” labels on Golden Cross (SMMA 50 crossing above SMMA 200), “SELL” labels on Death Cross (SMMA 50 crossing below SMMA 200). 🔔 Alerts: Built‑in TradingView alerts for Golden/Death Cross and for strong bullish/bearish EMA alignment. Use case: This tool helps traders quickly visualize short‑term momentum against long‑term smoothed trend direction. It highlights strong trending conditions, potential reversals, and crossover signals, making it suitable for swing trading, trend following, and confirmation of entries/exits.
Pine Script® Indikator
von Timbuktu49
Liquidity Sweep Reentry ToolkitHere’s a clear breakdown of what your Liquidity Sweep Reentry Toolkit script does, and how you can use it on your charts: 🔎 Script Breakdown 1. Visual Controls (Inputs) • : Master toggle to turn all visuals on/off. • : Show labels when a liquidity sweep + ChoCh condition occurs. • : Plot green/red triangles for bullish/bearish reentry signals. • : Prevent multiple signals within the same swing. • : Show HH/HL/LL/LH market structure letters. • : Slider to adjust how dim the background of HH/HL/LL/LH labels appear. 2. Core Conditions • Defines simple bullish () and bearish () candles. • is a placeholder for your Change of Character logic. 3. Sweep Detection • : Detects when price makes a new high compared to the last 5 bars. • : Detects when price makes a new low compared to the last 5 bars. 4. Restriction Flags • Tracks whether a sweep signal has already triggered in the current swing. • Resets when sweeps end, so new signals can appear. 5. Composite Triggers • : Fires when bullish candle + buy-side sweep + ChoCh condition align. • : Fires when bearish candle + sell-side sweep + ChoCh condition align. 6. Visual Labels • Gold labels mark “BS Sweep + ChoCh” or “SS Sweep + ChoCh” events. • Green triangle below bar = bullish reentry. • Red triangle above bar = bearish reentry. • Blue HH/HL/LL/LH labels narrate market structure pivots, with adjustable transparency. 7. Alerts • Alerts can be set for bullish or bearish sweep reentry triggers, so you get notified when conditions align. 📘 How to Use It 1. Apply to Chart Add the script to your TradingView chart (works best on intraday timeframes like 5‑minute). 2. Configure Visuals • Use the Visual Controls panel to toggle features on/off. • Adjust the Label Transparency slider to dim or brighten the HH/HL/LL/LH labels. 3. Interpret Signals • Gold labels show when a sweep + ChoCh condition occurs. • Triangles mark potential reentry points (green = bullish, red = bearish). • HH/HL/LL/LH labels narrate market structure shifts for clarity. 4. Set Alerts • Use the built‑in alert conditions to get notified when bullish or bearish sweep reentry triggers fire. 👉 In short: this toolkit helps you spot liquidity sweeps, confirm with ChoCh, and visualize reentry signals, while also narrating market structure pivots. It’s modular, so you can toggle features depending on how much visual clutter you want. 🛠 Workflow Example 1. Setup • Apply the script to your chart (e.g., 5‑minute S&P futures). • In the indicator settings, decide which visuals you want: • Turn on Sweep + ChoCh labels if you want to see gold tags narrating liquidity events. • Keep Entry triangles on to highlight actionable reentry points. • Adjust the Label Transparency slider so HH/HL/LL/LH structure labels are dim enough not to clutter. 2. Watch for Sweeps • As price pushes above recent highs → a Buy‑side Sweep is detected. • As price dips below recent lows → a Sell‑side Sweep is detected. • If ChoCh logic is true at the same time, you’ll see a gold label (“BS Sweep + ChoCh” or “SS Sweep + ChoCh”). 3. Confirm Reentry • If conditions align (bullish candle + buy‑side sweep + ChoCh), you’ll see a green triangle below the bar. • If bearish candle + sell‑side sweep + ChoCh, you’ll see a red triangle above the bar. • These triangles are your potential reentry triggers. 4. Narrate Market Structure • HH/HL/LL/LH labels appear at pivots, giving you a running commentary of structure shifts. • Example: HH → HL → HH shows bullish continuation; LH → LL → LH shows bearish pressure. • Use the transparency slider to keep these labels subtle but visible. 5. Alerts • Set alerts for “Bullish Sweep Reentry” or “Bearish Sweep Reentry” so you don’t miss signals even if you’re away from the screen. 📘 How to Use in Practice • Intraday trading: On a 5‑minute chart, use the toolkit to spot liquidity grabs and confirm reentry points. • Narration: The HH/HL/LL/LH labels help you keep track of structure without manually marking pivots. • Decision making: Gold labels + triangles = potential trade setups. Structure labels = context for trend bias. • Customization: Dim labels when you want a cleaner chart, brighten them when you’re focused on structure. 👉 In short: this script gives you a modular toolkit — sweeps, ChoCh confirmation, reentry signals, and structure narration — all adjustable so you can tailor the visuals to your workflow. 📈 Bullish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent highs, building liquidity above. 2. Liquidity Sweep • Price spikes above the prior swing high → the script detects a buy‑side sweep. • A gold label appears: “BS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bullish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential reentry setup. 4. Reentry Trigger • The script plots a green triangle below the bar. • This marks a bullish sweep reentry signal: price grabbed liquidity and is now showing strength. 5. Market Structure Narration • At the same time, the HH/HL labels update: • The sweep bar prints a new HH. • The next pivot low prints an HL. • This narrates bullish continuation: HH → HL → HH. 6. Trade Decision • You can use the green triangle as your entry cue. • The HH/HL narration gives you confidence that structure supports the trade. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: below the HL pivot or sweep low. • Target: next liquidity pool above, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Green triangle = actionable bullish reentry trigger. • HH/HL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean. 📉 Bearish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent lows, building liquidity underneath. 2. Liquidity Sweep • Price spikes below the prior swing low → the script detects a sell‑side sweep. • A gold label appears: “SS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bearish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential bearish reentry setup. 4. Reentry Trigger • The script plots a red triangle above the bar. • This marks a bearish sweep reentry signal: price grabbed liquidity below and is now showing weakness. 5. Market Structure Narration • At the same time, the LH/LL labels update: • The sweep bar prints a new LL. • The next pivot high prints a LH. • This narrates bearish continuation: LH → LL → LH. 6. Trade Decision • You can use the red triangle as your entry cue. • The LH/LL narration gives you confidence that structure supports the short. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: above the LH pivot or sweep high. • Target: next liquidity pool below, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Red triangle = actionable bearish reentry trigger. • LH/LL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean.
Pine Script® Indikator
von dscottmuller
SMAHiLO- 2 EMA/SMA can be used for trend following default value is 50 and 200 - green box and red box incorporated to chart for visual representation for Week ,Daily, H4, H2,H1 - blue line representation for opening candle, previous low and previous high and by clicking prev. close open alert at setting it will alert if prev. low or high are reach and current opening candle is breakdown or breakout settings: - engulfing alert it will alert bullish engulfing entry if 50 is above 200 vise versa - harami alert it will alert bullish harami if 50 is above 200 vise versa - pullback alert it will alert bullish pullback if 50 is above 200 or bearish pullback if 50 below 200 - mcd ob/os alert it will display green circle above candle if macd getting weaker from bearish to bullish vise versa - spot play alert most of the time buy alert only no sell alert. - engul/harami alert it will alert if harami or engulfing is met unlike on engulfing alert and harami alert it will follow the trend if 50 above 200 vise versa.
Pine Script® Indikator
von marjemvic18
NSE Swing Breadth NSE Swing Breadth – Market Health Dashboard (0–200, % from Neutral) Overview NSE Swing Breadth – Market Health Dashboard is a market-wide health and regime indicator designed to track internal strength and participation across Large-, Mid-, and Small-cap indices in the Indian equity market. Instead of focusing on price alone, this tool measures how strongly each segment is behaving relative to its own swing trend, normalizes those movements, and combines them into a single Market Health score. The result is a clean, objective dashboard that helps traders identify Risk-On, Caution, and Risk-Off regimes. This indicator is best used for position sizing, exposure control, and timing aggressiveness, rather than individual stock entries. Data Used The indicator internally tracks three broad NSE indices: Large Caps → NIFTY100EQUALWEIGHT Mid Caps → NIFTYMIDCAP150 Small Caps → NIFTYSMLCAP250 Using equal-weighted and broad indices ensures the signal reflects true market participation, not just index heavyweights. Core Logic 1. Swing Strength Model For each index, the script calculates normalized swing strength: Price is compared to its EMA swing baseline The deviation from the EMA is normalized using the EMA of absolute deviations This creates a volatility-adjusted strength value, allowing fair comparison across market regimes This answers the question: Is this segment pushing meaningfully above or below its recent trend? 2. Strength Converted to % from Neutral (Baseline = 100) Each segment’s strength is converted into percentage-style points around a neutral baseline of 100: 100 = Neutral +15 = +15% strength above neutral –20 = –20% weakness below neutral These values are plotted as three smooth lines: Blue → Large Caps Orange → Mid Caps Purple → Small Caps This makes relative leadership and divergence immediately visible. 3. Market Health Score (0–100) The indicator combines all three segments into a single Market Health score: Large Caps → 40% weight Mid Caps → 35% weight Small Caps → 25% weight Extreme values are clamped to avoid distortion, and the final score is normalized to a 0–100 scale: 70–100 → Strong, broad participation 40–69 → Mixed / unstable participation 0–39 → Weak, risk-off conditions Visual Components 📊 Market Health Histogram A vertical histogram displays Market Health (0–100) with enhanced visibility: 🟢 Green (≥ 70) → Strong Risk-On regime 🟠 Orange (40–69) → Caution / Transition 🔴 Red (< 40) → Risk-Off regime The histogram is visually compact and designed to reflect true market health, not exaggerated spikes. 📈 Strength Lines (Baseline = 100) Three strength lines show % deviation from neutral: Above 100 → Positive internal strength Below 100 → Internal weakness These lines help identify: Leadership (which segment is driving the market) Early deterioration (small/mid caps weakening first) Broad confirmation (all segments rising together) Dashboard Tables 📌 Market Regime Table (Bottom-Left) Displays the current market regime: 🟢 RISK ON 🟡 CAUTION 🔴 RISK OFF Along with the exact Market Health score (0–100). 📌 Strength Table (Top-Right) Shows Large / Mid / Small cap strength as % from neutral, for example: +18% → 18% above neutral –12% → 12% below neutral This avoids misleading interpretations and keeps values intuitive and actionable. How to Use This Indicator Risk-On (Green) Favor full position sizes, trend-following strategies, and broader participation trades. Caution (Orange) Reduce leverage, tighten stops, and be selective. Expect choppiness. Risk-Off (Red) Prioritize capital protection, reduce exposure, and avoid aggressive longs. This indicator is not an entry signal — it is a market environment filter. ⚠️ Important Style Setting (Required) For correct visualization: Settings → Style → Uncheck “Labels on price scale” This prevents the indicator’s internal 0–200 model scale from interfering with the chart’s price scale and keeps the pane clean and readable. Summary NSE Swing Breadth – Market Health Dashboard provides a clear, objective view of market internals, helping traders align their risk with the true underlying condition of the market — not just price movement. It is especially effective for: Market regime identification Exposure management Avoiding false breakouts in weak breadth environments
Pine Script® Indikator
von vikram_bains
Kinetic RSI [Vel + Accel] + AlertsThe Problem with Standard RSI Most traders use the Relative Strength Index (RSI) to see if a market is "Overbought" (above 70) or "Oversold" (below 30). The problem? A strong trend can stay overbought for days, burning short sellers, or an asset can stay oversold while price continues to crash. Standard RSI tells you where the price is, but it doesn't tell you how hard it is moving. ​The Solution: Kinetic RSI This script reimagines RSI by applying basic physics concepts: Velocity and Acceleration. Instead of asking "Is RSI below 30?", this indicator asks: "Is RSI below 35 AND did it just make a violent, high-speed turn upwards?" ​It filters out lazy, drifting price action and only signals when momentum is accelerating in a new direction. ​How It Works (The Math) ​Velocity: We calculate the speed of the RSI change (Current RSI - Previous RSI). ​Acceleration: We calculate if that speed is increasing (Current Velocity - Previous Velocity). ​The Trigger: A signal is only generated if the RSI is in an extreme zone (<35 or >65) AND it has high Velocity AND positive Acceleration. ​How to Trade It ​1. The "Kick" Signals (Background Highlights) ​🟢 Green Background (Bullish Kick): The RSI was low, but buyers stepped in aggressively. The momentum is not just positive; it is accelerating upward. This is often a "V-Bottom" catch. ​🔴 Red Background (Bearish Kick): The RSI was high, but sellers slammed the price down. Momentum is accelerating downward. ​2. The Line Color ​Lime Line: Velocity is positive (Momentum is rising). ​Fuchsia Line: Velocity is negative (Momentum is falling). ​Usage: If the background flashes Green (Buy Signal), but the line turns back to Fuchsia (Red) a few bars later, the move has failed—exit the trade. ​Settings & Alerts ​RSI Length: Standard 14 (Adjustable). ​Velocity Threshold: Controls sensitivity. ​Lower (e.g., 2-3): More signals, catches smaller reversals. ​Higher (e.g., 5+): Fewer signals, catches only massive "shocks" to the price. ​Alerts Included: You can set alerts for "Bullish Kick," "Bearish Kick," or "Any Kick" to get notified of volatility spikes. ​Best Practices ​Wait for the Close: This indicator measures the closing velocity. Always wait for the bar to close to confirm the background color signal. ​Trend Filtering: This works best as a "Reversal" indicator. If the market is in a super-strong uptrend, ignore the Bearish (Red) signals and only take the Bullish (Green) dips.
Pine Script® Indikator
von MonkeyPhone