Auf geht's

Indikatoren und Strategien

Altcoin Market Share vs ETH/BTCIdea from x.com on X Each colored line represents the percentage share of different altcoin baskets (excluding stablecoins) or ETH relative to either the ETH or BTC market cap (can add more, e.g. SOL or create different dashboards with Memes, AI, DeFi, you name it) I know: At first glance, this may seem noisy and complex, but it all depends on the questions you want to answer. Once you define those, much of the noise becomes irrelevant, allowing you to simplify the analysis and focus only on what matters to you. What I’ve done here is provide a few initial insights that I found useful (will isolate a couple of them in future). This analysis doesn’t tell you which specific coins to buy, but rather provides a broad market overview as a foundation. It helps guide you toward areas of relative strength or weakness. I’ve included a lot of information here, but the key is to extract the signal from the noise by asking the right questions, for example: At what point do altcoins become overvalued or undervalued against Ethereum? However, when asking these questions, it's important to remember that an overvaluation or undervaluation of Ethereum relative to altcoins tells you little about its valuation against Bitcoin or USD. These are separate questions further down the process.
Pine Script® Indikator
von privatekapperaza
UniqueHorn - MA Indicator with SMI📊 Overview The UniqueHorn MA-SMI Indicator is a comprehensive trading tool that combines multiple Moving Averages with the Stochastic Momentum Index (SMI) in a clean, organized display. Designed for traders who need clear visual analysis of trend, momentum, and potential reversal points. ✨ Key Features Moving Averages (8 Total) 3 EMAs: 5, 10, 20 (for quick trend detection) 5 SMAs: 30, 40, 50, 65, 200 (for medium to long-term trends) Smart Timeframe Adaptation Daily & Lower: EMA 5, 10, 20 | SMA 50, 65, 200 Weekly Chart: EMA 10, 20 | SMA 30, 40, 50, 200 Automatic display optimization based on timeframe SMI Integration (Stochastic Momentum Index) Visual signals directly on main chart Overbought/Oversold markers Bullish/Bearish crossover signals Optional background coloring for extreme zones Current SMI value as label Climax Detection Buying Climax: New 52-week high with red candle (weakness signal) Selling Climax: New 52-week low with green candle (strength signal) Works optimally on weekly charts 📈 Usage & Strategies Trend Following Use MAs as dynamic support/resistance EMA crossovers for entry/exit signals SMA 200 as primary trend filter Momentum Trading SMI < -40: Oversold zone → Potential long opportunity SMI > 40: Overbought zone → Potential short opportunity SMI crossovers as early trend reversal signals Climax Trading Buying Climax: Warning of potential top formation Selling Climax: Indication of potential bottom formation ⚙️ Customization Options Individual color selection for each MA Separate line widths for EMA 5, 10, and other MAs Show/Hide individual components Fully adjustable SMI parameters Optional info table with status overview Comprehensive alert system for all signals 🎯 Ideal For Swing Traders: Use the combination of MAs and SMI for optimal entries/exits Position Traders: Focus on longer-term MAs and weekly chart signals Day Traders: Fast EMAs with SMI momentum for short-term setups 📝 Notes Climax signals work exclusively on weekly charts SMI signals are available in all timeframes Timeframe-specific MA display reduces visual clutter Combine multiple signals for higher probability trades 🔔 Alert Functions The indicator provides alerts for: Buying/Selling Climaxes SMI Overbought/Oversold zones SMI Bullish/Bearish crossovers EMA crossovers Price-SMA200 crossovers Version: 1.0 Pine Script: v6 Author: UniqueHorn This indicator is the result of careful development and optimization for professional trading. For questions or suggestions, please use the comments section.
Pine Script® Indikator
von darkidark
Inside Bar Ind/Alert with High/Low MarkersThis indicator identifies inside bar candles, a common price action pattern where the current candle's range is completely within the range of the previous candle. ✨ Enhancements in this version: When an inside bar is detected, the script marks the high and low of the major candle (the candle immediately before the inside bar). These high/low levels act as a temporary range to visualize market compression. If price breaks above the high or below the low of the major candle, the marker disappears, signaling a potential breakout. Green inside bars indicate bullish body; Red inside bars indicate bearish body. 📍 Visuals: Inside bars are marked with colored bar highlights and triangle shapes. The major candle's high/low are marked using gray cross shapes above/below the chart. 🔔 Alert Included: An alert triggers when a new inside bar is detected. This tool is especially useful for traders tracking consolidation and breakout patterns within price action.
Pine Script® Indikator
von MFX1111
Volumetric Support and Resistance [BackQuant]Volumetric Support and Resistance What this is This Overlay locates price levels where both structure and participation have been meaningful. It combines classical swing points with a volume filter, then manages those levels on the chart as price evolves. Each level carries: • A reference price (support or resistance) • An estimate of the volume that traded around that price • A touch counter that updates when price retests it • A visual box whose thickness is scaled by volatility The result is a concise map of candidate support and resistance that is informed by both price location and how much trading occurred there. How levels are built Find structural pivots uses ta.pivothigh and ta.pivotlow with a user set sensitivity. Larger sensitivity looks for broader swings. Smaller sensitivity captures tighter turns. Require meaningful volume computes an average volume over a lookback period and forms a volume ratio for the current bar. A pivot only becomes a level when the ratio is at least the volume significance multiplier. Avoid clustering checks a minimum level distance (as a percent of price). If a candidate is too close to an existing level, it is skipped to keep the map readable. Attach a volume strength to the level estimates volume strength by averaging the volume of recent bars whose high to low range spans that price. Levels with unusually high strength are flagged as high volume. Store and draw levels are kept in an array with fields for price, type, volume, touches, creation bar, and a box handle. On the last bar, each level is drawn as a horizontal box centered at the price with a vertical thickness scaled by ATR. Borders are thicker when the level is marked high volume. Boxes can extend into the future. How levels evolve over time • Aging and pruning : levels are removed if they are too old relative to the lookback or if you exceed the maximum active levels. • Break detection : a level can be removed when price closes through it by more than a break threshold set as a fraction of ATR. Toggle with Remove Broken Levels. • Touches : when price approaches within the break threshold, the level’s touch counter increments. Visual encoding • Boxes : support boxes are green, resistance boxes are red. Box height uses an ATR based thickness so tolerance scales with volatility. Transparency is fixed in this version. Borders are thicker on high volume levels. • Volume annotation : show the estimated volume inside the box or as a label at the right. If a level has more than one touch, a suffix like “(2x)” is appended. • Extension : boxes can extend a fixed number of bars into the future and can be set to extend right. • High volume bar tint : bars with volume above average × multiplier are tinted green if up and red if down. Inputs at a glance Core Settings • Level Detection Sensitivity — pivot window for swing detection • Volume Significance Multiplier — minimum volume ratio to accept a pivot • Lookback Period — window for average volume and maintenance rules Level Management • Maximum Active Levels — cap on concurrently drawn levels • Minimum Level Distance (%) — required spacing between level prices Visual Settings • Remove Broken Levels — drop a level once price closes decisively through it • Show Volume Information on Levels — annotate volume and touches • Extend Levels to Right — carry boxes forward Enhanced Visual Settings • Show Volume Text Inside Box — text placement option • Volume Based Transparency and Volume Based Border Thickness — helper logic provided; current draw block fixes transparency and increases border width on high volume levels Colors • Separate colors for support, resistance, and their high volume variants How it can be used • Trade planning : use the most recent support and resistance as reference zones for entries, profit taking, or stop placement. ATR scaled thickness provides a practical buffer. • Context for patterns : combine with breakouts, pullbacks, or candle patterns. A breakout through a high volume resistance carries more informational weight than one through a thin level. • Prioritization : when multiple levels are nearby, prefer high volume or higher touch counts. • Regime adaptation : widen sensitivity and increase minimum distance in fast regimes to avoid clutter. Tighten them in calm regimes to capture more granularity. Why volume support and resistance is used in trading Support and resistance relate to willingness to transact at certain prices. Volume measures participation. When many contracts change hands near a price: • More market players hold inventory there, often creating responsive behavior on retests • Order flow can concentrate again to defend or to exit • Breaks can be cleaner as trapped inventory rebalances Conditioning level detection on above average activity focuses attention on prices that mattered to more participants. Alerts • New Support Level Created • New Resistance Level Created • Level Touch Alert • Level Break Alert Strengths • Dual filter of structure and participation, reducing trivial swing points • Self cleaning map that retires old or invalid levels • Volatility aware presentation using ATR based thickness • Touch counting for persistence assessment • Tunable inputs for instrument and timeframe Limitations and caveats • Volume strength is an approximation based on bars spanning the price, not true per price volume • Pivots confirm after the sensitivity window completes, so new levels appear with a delay • Narrow ranges can still cluster levels unless minimum distance is increased • Large gaps may jump past levels and immediately trigger break conditions Practical tuning guide • If the chart is crowded: increase sensitivity, increase minimum level distance, or reduce maximum active levels • If useful levels are missed: reduce volume multiplier or sensitivity • If you want stricter break removal: increase the ATR based break threshold in code • For instruments with session patterns: tailor the lookback period to a representative window Interpreting touches and breaks • First touch after creation is a validation test • Multiple shallow touches suggest absorption; a later break may then travel farther • Breaks on high current volume merit extra attention Multi timeframe usage Levels are computed on the active chart timeframe. A common workflow is to keep a higher timeframe instance for structure and a lower timeframe instance for execution. Align trades with higher timeframe levels where possible. Final Thoughts This indicator builds a lightweight, self updating map of support and resistance grounded in swings and participation. It is not a full market profile, but it captures much of the practical benefit with modest complexity. Treat levels as context and decision zones, not guarantees. Combine with your entry logic and risk controls.
Pine Script® Indikator
von BackQuant
Dual Stochastic with Trend FilterThe "Dual Stochastic with Trend Filter" is an oscillator indicator designed to provide clearer, trend-aligned trading signals. It uses two distinct stochastic oscillators to identify potential entry points and incorporates an optional EMA-based trend filter to ensure that you are trading in the direction of the broader market momentum. How It Works and How to Use It This indicator combines two key technical analysis concepts: momentum (via stochastics) and trend (via moving averages). Core Components: Dual Stochastic Oscillators: Signal Line 1 (Blue): A standard stochastic oscillator. Signal Line 2 (Red): A second stochastic oscillator, often using a different source (like hlcc4) to provide a smoother, more reliable signal. A buy signal is generated when the Blue Line (d1) crosses above the Red Line (d2). A sell signal is generated when the Blue Line (d1) crosses below the Red Line (d2). Trend Filter (Optional): This feature uses a fast and a slow Exponential Moving Average (EMA) to determine the overall market trend. When the fast EMA is above the slow EMA, the background will turn green, indicating an uptrend. When the fast EMA is below the slow EMA, the background will turn red, indicating a downtrend. This filter can be toggled on or off in the indicator settings. How to Use: With Trend Filter Enabled (Recommended): Long (Buy) Entry: Look for a green triangle buy signal (▲). This signal only appears when: The Blue Signal Line crosses above the Red Signal Line. The market is in a confirmed uptrend (green background). Short (Sell) Entry: Look for a red triangle sell signal (▼). This signal only appears when: The Blue Signal Line crosses below the Red Signal Line. The market is in a confirmed downtrend (red background). Exit Signal: A yellow circle (●) appears to suggest closing an open trade. This signal is triggered for a long position if either the stochastics have a bearish cross or the trend flips to a downtrend. Conversely, for a short position, it's triggered by a bullish stochastic cross or a trend flip to an uptrend. With Trend Filter Disabled: If you turn off the "Use Trend Filter" option, the indicator will function as a simple dual stochastic crossover system. A green triangle (▲) will appear every time the Blue Line crosses above the Red Line. A red triangle (▼) will appear every time the Blue Line crosses below the Red Line. The background coloring and exit signals based on trend flips will be deactivated. This mode is more sensitive but may produce more false signals in choppy markets. Key Visuals: Blue Line: The primary signal line. Red Line: The secondary, often smoother, signal line. Green Triangle (▲): Bullish entry signal. Red Triangle (▼): Bearish entry signal. Yellow Circle (●): Suggested trade exit/stop. Green/Red Background: Visual confirmation of the current uptrend or downtrend. By filtering stochastic signals with the dominant trend, this indicator helps traders avoid common pitfalls like entering short positions during a strong uptrend or buying into a bearish market. This alignment of momentum and trend is key to improving signal quality. Disclaimer This indicator is provided for educational and informational purposes only and should not be considered as financial advice or a recommendation to buy or sell any asset. All trading and investment decisions are your own sole responsibility. Trading financial markets involves a high level of risk, and you may lose more than your initial investment. Past performance is not indicative of future results. The signals generated by this indicator are not guaranteed to be accurate, and you should always use this tool in conjunction with other forms of analysis and sound risk management practices. Before using this indicator in a live trading environment, it is strongly recommended that you backtest it thoroughly and practice with it on a demo account. The author is not responsible for any financial losses you may incur from using this script.
Pine Script® Indikator
von EkaSanatani
1
DM Impulse Enhanced [BackQuant]DM Impulse Enhanced What this is (and what it isn’t) DM Impulse Enhanced is a signal-driven overlay that classifies market action into two practical regimes: Long (risk-on) and Cash (risk-off). It’s built around a proprietary impulse model from the directional-movement family, wrapped in a persistence test and a state machine. Because this script is private, the core mechanics are intentionally abstracted here; what follows explains how to read and use it without revealing the protected calculation. Why traders use it Many tools oscillate or describe “how stretched” price is; fewer make a firm, operational call that you can automate. DM Impulse Enhanced aims to do exactly that declare when upside pressure is broad and durable enough to justify a long bias, and when deterioration is strong enough to stand aside (cash/short discretion). The emphasis is on impulse persistence rather than one-off spikes. What you see on the chart • Long / Cash markers – Green up-triangles (Long) and red down-triangles (Cash) plot at the bar where the regime changes. • Regime-tinted bars (optional) – Candles can be softly shaded green during Long and red during Cash for at-a-glance context. • Trend ribbon (context only) – A narrow ribbon (fast/slow moving averages) is tinted by the current regime to show trend alignment; it does not generate signals on its own. • No separate sub-pane – Signals are intended to sit directly on price for immediate decision-making. How the logic behaves (high-level) Impulse core – A directional-movement–based engine estimates the strength of buying vs. selling pressure over a user-defined horizon. Persistence gate – Instead of reacting to a single reading, the model evaluates how consistently that impulse dominates across a configurable lookback range. State machine – When persistence clears (or fails) a pair of thresholds, the model flips and stays in that regime until evidence justifies a change. This “stickiness” is intentional; it reduces whipsaws in choppy tape. Inputs & controls Calculation Settings • DM Length – The base horizon for the impulse engine. Longer = smoother/steadier; shorter = quicker/more reactive. • Start / End – Defines the span of the persistence check. Expanding the span asks the market to prove itself against more history before changing regime. Signal Settings • Long Threshold – The persistence level required to promote the model into Long. • Short Threshold – The level that, once crossed to the downside, demotes the model into Cash. Using a cross-under event for risk-off helps avoid premature exits on noise. Visual Settings • Long / Short colours – Customize marker and shading hues. • Color Bars? – Toggle candle tinting by regime (off if you prefer a clean chart). Reading the signals • Long prints only when the model observes sustained upside pressure across the configured span. Treat this as permission to engage with pullbacks, breakouts, or your preferred setups in the direction of the trend. • Cash prints when downside deterioration is strong enough to invalidate the prior regime. It’s a risk-off directive—flatten, hedge, or switch to short strategies according to your plan. • Regime persistence is a feature: once Long, the model won’t flip on minor dips; once Cash, it won’t re-arm on minor bounces. If you want more flips, shorten the spans and relax thresholds; if you want fewer, do the opposite. Practical tuning guide Match DM Length to your timeframe   – Intraday: smaller length for timely response.   – Swing/Position: larger length to filter desk-noise and track higher-timeframe flows. Size the persistence span to your goal   – Narrow span: faster regime changes, more trades, more noise.   – Wide span: fewer, higher-conviction calls, longer holds. Set realistic thresholds   – The Long threshold should be reachable with your chosen span; the Short threshold should be low enough to catch genuine deterioration but not so tight that it flips on every dip. Decide on cosmetics   – Turn on bar tinting for discretionary reading, or keep it off when exporting screenshots or running other overlays. Suggested workflows • Trend-following with discipline – Trade only in the Long regime; use structure (higher lows, anchored VWAP, or pullbacks to your MA stack) for entries and the Cash flip as a portfolio-level exit. • Risk overlay – Keep your normal strategy, but: reduce size when Cash appears; re-enable full risk only after Long reasserts. • Multi-timeframe gating – Require Long on a higher timeframe (e.g., 4H or 1D), then take entries on a lower one. If the high-TF posts Cash, stand down. How the ribbon fits in The ribbon visualizes short- vs. intermediate-term trend in the same colour as the regime. It’s deliberately “dumb”: it does not change the signal, it just helps you see when price action and regime are in harmony (e.g., pullbacks during Long that hold above the ribbon). Alerts included • DM Impulse LONG – Triggers as the persistence measure clears the Long threshold. • DM Impulse CASH – Triggers when deterioration crosses the Short threshold from above. Configure alerts to fire on bar close if you want final (non-intrabar) decisions. Strengths • Actionable binary output – Long/Cash is unambiguous and easy to automate. • Persistence-aware – Focuses on runs that endure, not one-bar excitement. • Asset/timeframe agnostic – Works anywhere you trust directional-movement concepts (equities, futures, crypto, FX). Limitations & cautions • Not a reversal caller – It’s a regime classifier. If you need early bottoms/tops, pair it with your own exhaustion or liquidity tools. • Parameter feasibility matters – If your thresholds are set beyond what your span can reasonably achieve, signals may rarely (or never) trigger. • Chop happens – In mean-reverting or news-driven tape, expect more frequent flips unless you widen spans and thresholds. • Intrabar movement – Like any responsive model, provisional intrabar states can appear before the bar closes. Use “bar close” alerts for finality. Getting started (safe defaults you can adapt) • Intraday bias – Shorter DM Length, modest span, moderately tight thresholds. • Swing filter – Longer DM Length, wider span, stricter Long and sufficiently low Short. • Conservative overlay – Keep thresholds firm and spans wide; use signals to scale risk rather than flip directions frequently. Summary DM Impulse Enhanced is a persistence-focused regime classifier built on directional-movement concepts. It answers a narrow question clearly “Risk-on or risk-off?” and stays with that answer until the evidence meaningfully changes. Use it as a bias switch, a portfolio risk overlay, or a gate for your existing entry logic, and size its spans/thresholds to the cadence of the market you trade.
Pine Script® Indikator
von BackQuant
13
TEEREX COUNTDOWN BY N' TEEREX HOONJONGPANG Features: Price Flip Detection – identifies initial buy/sell setups based on close price comparisons to previous bars. Setup Phase (1–9) – counts consecutive bars fulfilling Teerex number conditions; plots numbers on each candle. Cd Phase (1–13) – continues counting after Setup 9; highlights potential reversal points. Signals – marks Setup 9 and Countdown 13 with clear labels and arrows (“LONG” / “SELL”). TDST Lines – draws dynamic support (Buy TDST) or resistance (Sell TDST) lines based on Setup 9 highs/lows. These lines help identify potential breakout or bounce zones. Customizable Display – options to show/hide numbers, signals, and TDST lines; color-coded for clarity. Usage: Monitor Setup 9 and Countdown 13 labels for strong buy/sell signals. Use TDST lines as reference for support/resistance, target levels, or confirmation of trend continuation. Visuals: Numbers 1–9/1–13 appear on the chart for precise counting. Arrows and labels indicate Setup 9 completion and Cd 13 completion. TDST lines extend to the right, updating with each new Setup 9.
Pine Script® Indikator
von hoonjongpang
FBTBBT (Filtered Black Two Bar Break Through)📘 FBTBBT (Filtered Black Two Bar Break Through) Overview FBTBBT is a filtered breakout indicator based on the classical Two Bar Break Through (TBBT) concept. It generates Buy and Sell signals when price breaks above or below the previous bar’s high/low, but only displays the **first signal in a run** to avoid noise and duplicates. - Buy Signal → Break above previous high - Sell Signal → Break below previous low - Filtered → Only the first signal in a consecutive streak is shown --- Key Features 1. Filtered Signals • Avoids repeated identical signals. • Example: 3 consecutive bars breaking the previous low → only the first bar shows a Sell signal. 2. Confirmation Options • Real-Time Mode: signals appear intrabar as soon as the breakout happens. • Close Confirmation: signals appear only after bar close beyond previous high/low (reduces repainting). 3. Visual Aids • Green “Buy” labels below breakout bars. • Red “Sell” labels above breakout bars. • Optional lines for previous bar’s high/low levels. 4. Alerts • Alerts trigger only on the first filtered signal in each run. • Messages specify breakout above (Buy) or below (Sell). --- How to Use • Add FBTBBT to your TradingView chart. • Choose Real-Time or Close-Confirmed signals depending on your style. • Focus on the **first breakout signal**; ignore duplicates until the opposite side appears. • Combine with trend filters, volume, or higher timeframe context for stronger accuracy. --- 👉 In short: **FBTBBT = Clean, filtered breakout signals with no noise.** Perfect for traders who want **precise first-bar breakouts** while avoiding repeated alerts.
Pine Script® Indikator
von turtlekim
Vegas Touch EMA12 切換 EMA-12 Based Switching Rules (No RSI) For Long trades: Tunnel Mode → If EMA-12 is between EMA-144 and EMA-169 → use the Tunnel (144/169) lines as the touch reference. Base Mode → If EMA-12 is below EMA-169 but still above EMA-676 → use the Base (576/676) lines as the touch reference. No Long → If EMA-12 is below EMA-676, no long trade is allowed. For Short trades (mirror logic): Tunnel Mode → If EMA-12 is between EMA-144 and EMA-169 → use the Tunnel (144/169) lines as the touch reference. Base Mode → If EMA-12 is above EMA-169 but still below EMA-676 → use the Base (576/676) lines as the touch reference. No Short → If EMA-12 is above EMA-676, no short trade is allowed.
Pine Script® Indikator
von allen7326288
Vegas ema 過濾 Vegas Channel with EMA-Filter — Trading Rules Components Tunnel: EMA 144 & 169 (upper = max, lower = min). Base: EMA 576 & 676 (upper = max, lower = min). Fast filter: EMA12. Touch threshold: ATR-based or % of the reference line. Long touch = low ≤ line + thr; Short touch = high ≥ line − thr. Trend gate LongTrendOK: EMA144 > EMA576 and EMA169 > EMA676 and close > BaseUpper. ShortTrendOK: EMA144 < EMA576 and EMA169 < EMA676 and close < BaseLower. Price-action pattern (either one) Pin40: bullish pin = close>open & lower wick ≥ 40% of range; bearish pin = close 169 → use Base. Else → use Tunnel. EMA12 hard locks (coarse filter) Lock longs if EMA12 < 676 (no long signals at all). Lock shorts if EMA12 > 676 (no short signals at all). (Optional) Tunnel lock/unlock (fine filter) Lock longs when EMA12 drops below TunnelLower; unlock when A) EMA12 crosses back above 144/169/TunnelUpper, or B) a bullish Pin/Eng appears at BaseUpper and EMA12 is back ≥ TunnelLower. Lock shorts when EMA12 breaks above TunnelUpper; unlock when A) EMA12 crosses back below 144/169/TunnelLower, or B) a bearish Pin/Eng appears at BaseLower and EMA12 is ≤ TunnelUpper. Final signal LONG fires when: Close-bar confirmed ∧ Cooldown passed ∧ LongTrendOK ∧ ActiveBand lower touch ∧ Pin40 or Eng60 ∧ not hard-locked ∧ (not tunnel-locked if enabled). SHORT symmetrical with upper touch. Quality-of-life Close-bar confirmation to avoid repaint. Cooldown (e.g., 10 bars) to prevent signal clusters. Alerts include a compact lock status string (LckL/LckS/HardL/HardS). Optional “BLOCK:” labels show why a bar didn’t trigger (noTouch, EMA12<676/>676, TunnelLock, cooldown, notClose). Suggested defaults ATR(14), ATR multiplier 0.35 (or 0.20% if using Percent mode). autoSwitchByEMA12_* = ON, hardLockBelow676/Above676 = ON, useTunnelLock* = OFF. useCloseBar = ON, signalCooldown = 10. Design intent Tunnel (144/169) captures the working trend; Base (576/676) defines the structural bias. EMA12 drives regime selection (Tunnel vs Base) and hard locks to keep signals sparse and aligned with momentum.
Pine Script® Indikator
von allen7326288
ATR% Multiples from SMA/EMAInspired by the indicator ATR% multiple from 50-MA by @jfsrev, this tool measures how far price is extended from a Moving Average using an ATR% multiple. What’s added vs. ATR% multiple from 50-MA indicator: Downside multiples — flags extensions below and above the MA. Timeframe selection — compute on Daily/Weekly/Monthly or intraday, independent of your chart. EMA/SMA toggle — choose the MA type (EMA/SMA). Multi-thresholds — set several ATR% multiple levels. How to use the indicator: I find the ATR multiple to be a very versatile tool that can be used for profit taking, mean reverting, and to make better assumption about what market environment to expect. Which thresholds should you use? It's up to you really. Personally I use them in a quite discretionary manner where I will change inputs depending on market and it's current regime - E.g. if we are in a strong uptrend I might use higher multiples to the upside and lower multiples to the downside, and if the market is in a range I will use them in a different manner. Be creative, test things, and work out what makes sense to you and the market and timeframe you are trading in.
Pine Script® Indikator
von CalmConsistent
Sessions & Key LevelsAn indicator made to show: - Session Open & Close Breaks - Session Ranges/Outline (Lower transparency % in settings to show) Session times are editable in settings. - Session High's & Low's - H1 High's & Low's These are aligned with the Session Open & Close times. (Takes the H/L between the input times) Lines will fade once price touches & will be deleted once the current session ends. User can edit H1 pivot strength in settings. - Session Activity Dashboard Used to show which sessions are currently active. (Toggled off by default)
Pine Script® Indikator
von tkytrades