Auf geht's

Indikatoren und Strategien

Highs & LowsIntroduction: This indicator marks highs and lows from the previous New York, Asian, and London sessions, including the daily high and low. It is made to be as user friendly/adjustable as possible. It was designed around trading during the New York morning session, using the 1 hour and 1 minute(or similar) timeframes in conjunction. Settings: Common settings for the cleanest viewing are as follows: 1 Hour Chart Settings: Box #3 "Label Vertical Offset" to "18". Box #4 "Label X Offset" to "2". 1 Minute Chart Settings: Box #3 "Label Vertical Offset" to "2". Box #4 "Label X Offset" to "0". Note: Adjusting text to the darkest "black" setting may provide the best contrast.
Pine Script® Indikator
von Montycarlo1993
MSO - Market Stress Oscillator [WavesUnchained]MSO - Market Stress Oscillator Bidirectional stress oscillator built on WVF + Z-score, with JMA/ADX filters, regime bias, and validated follow-through. Designed to expose downside panic vs upside euphoria and measure whether the market accepts or rejects each stress event. Quick Setup - Stress Color Mode : Intuitive (Downside=green, Upside=red) or Technical (classic colors). CORE CONCEPT - Downside stress : price flushes below WVF baseline (panic) - Upside stress : price stretches above WVF baseline (euphoria) - Stress is normalized via Z-score for cross-asset/timeframe robustness ENGINE (BI-WVF + Z-SCORE) - WVF Long and Short computed separately (panic vs euphoria) - Z-score window normalizes extremes - Thresholds are TF-aware (15m / 1h / 4h / D / W / M) QUALITY FILTERS - JMA trend filter (slope-based, low-lag) - ADX minimum for trend strength - Min Extreme Duration to avoid 1-bar noise - Cooldown to prevent signal clustering ACCEPT / REJECT LOGIC - Events are evaluated after reactBars (forward follow-through) - Accepted : follow-through >= minFollowATR - Rejected : follow-through < minFollowATR - Scores (0..1) optionally plotted as acceptance strength BIAS / REGIME CONTEXT - Bias line : zL - zS (who dominates) - Bias band : regime threshold (only meaningful outside band) - HTF Wind : higher-timeframe bias flip (JMA smoothed) - Clarity Label : regime entry aligned with HTF + absBias threshold VISUALIZATION - Stress Lines : Red = downside stress (panic), Green = upside stress (euphoria) - Bias Line : zL - zS (who dominates). Neutral inside band, colored outside. - Bias Band : regime threshold. Fill shows when bias is usable. - Zones : boxes at peak events (history preserved, FIFO capped) - Chart Labels : DA/DR/UA/UR (or LA/LR/SA/SR) at peaks - Lines : reaction window + peak level lines (FIFO capped) STRESS COLOR MODE - Intuitive : Downside stress = green, Upside stress = red (opportunity mapping) - Technical : Downside stress = red, Upside stress = green (classic convention) - This setting is visual only ; logic, bias, and signals are unchanged HOW TO USE 1. Read the stress lines : red spikes = panic risk, green spikes = euphoria risk. 2. Check bias : outside the band = usable regime; inside = noise. 3. Use DA/DR/UA/UR : - DA/UA = stress accepted (follow-through confirmed) - DR/UR = stress rejected (weak follow-through) 4. Add HTF wind : prefer signals aligned with HTF bias. 5. Tune presets by TF; use manual TF override for testing. PRESETS & UI - Full TF preset table (15m / 1h / 4h / D / W / M) - Manual TF override for testing - Preset summary panel (optional) LOGGING (CSV) - Pivot and stress logs for validation - Early/First-pivot classification options - Label IDs included for chart-to-log tracing BEST USE CASES - Panic/euphoria detection with follow-through validation - Regime-aware context (bias + HTF wind) - Multi-timeframe stress mapping (15m to Weekly) Version: 1.0.0 Author: WavesUnchained Pine Script: v6 Educational use only. Test thoroughly before live trading.
Pine Script® Indikator
von WavesUnchained
Trend Dip-BuyerThis strategy is a simplified, high-probability Dip Buying System designed for active growth stocks. Instead of chasing breakouts at the top, it waits for the stock to take a "breather" (pullback) within an uptrend and buys the discount. It combines a classic Trend Filter (50 EMA) with a sensitive Momentum Oscillator (RSI 2) to pinpoint the exact moment a pullback is likely to reverse back up. How It Works: 1. The Trend Filter (50 EMA) The strategy ONLY trades Long. It requires the price to be above the 50-period Exponential Moving Average (EMA) (Blue Line). This ensures you are trading with the momentum of the market, not against it. 2. The Dip Signal (RSI 2) It uses a fast 2-period RSI. When RSI(2) drops below 50, it signals that the stock is temporarily "oversold" or resting. This is your cue that a discount entry is available. 3. Dynamic Exits Profit Taking: The primary target is dynamic. The strategy looks to exit when RSI(2) spikes above 70, allowing you to capture the bulk of the momentum swing. (A fixed ATR target option is also included). Safety: A 3x ATR Stop Loss protects the trade from sudden reversals. ✅ Simple Entry Checklist Before taking a trade, ensure all 3 boxes are checked: Trend Check: Is the current price ABOVE the Blue Line (50 EMA)? Dip Check: Is the RSI (2) value BELOW 50? Time Check: Is it past 12:00 PM? (Recommended for cleaner trends, but optional). 👉 If YES to all: Enter Long on the next candle open. Best Settings (Customizable): RSI Threshold: Default is 50 (Balanced). Lower to 30 for fewer, higher-quality trades. Exit Method: "RSI > 70" is recommended for maximizing wins in strong trends. Time Filter: "Trade > 12pm" is enabled by default to avoid morning volatility.
Pine Script® Strategie
von ctrchris08
Session Opening Bar RangeSession Opening Bar Range (OBR) - Advanced Opening Range Indicator with Statistical Analysis Overview The Session First Bar Range (FBR) indicator is a comprehensive tool that captures and projects key levels based on the first bar of a user-defined trading session. Unlike traditional daily opening range indicators, this script allows traders to focus on specific session windows (New York RTH, London, Asia, etc.) and analyze price behavior relative to the initial momentum established in that session's opening bar. What makes this indicator unique is its combination of three distinct projection methodologies: statistical analysis based on historical range data, Fibonacci extensions, and fixed-point rotation levels commonly used by institutional traders. To our knowledge, this is the only opening range indicator that incorporates statistical standard deviation levels calculated from historical first bar ranges, making it both a technical and probabilistic tool. Core Concept The opening range concept is based on the principle that the initial price action of a trading session often sets the tone for the remainder of that session. Professional traders have long observed that: The first bar's high and low act as key reference points Price often respects or breaks these levels with significance Expansion beyond the opening range tends to occur in measurable increments This indicator takes these observations and enhances them with: Historical probability analysis - "Based on the last 60 sessions, price typically extends X standard deviations beyond the opening range" Proportional projections - Fibonacci-based extensions showing where measured moves typically target Fixed-point rotations - Institutional rotation levels (e.g., 65 points for NQ, 15 points for ES) How It Works Session Detection & First Bar Capture The indicator uses Pine Script's time() function with timezone support to precisely detect when a trading session begins. When the first bar of the selected timeframe occurs within the session window, the script captures: High (H): The high of the first bar Low (L): The low of the first bar Mid (M): The midpoint (hl2) of the first bar Critical Detail: These levels are fixed from the first bar only - they do not update as the session progresses. This differs from many "opening range" indicators that use a time period (e.g., first 30 minutes). Here, you select the bar timeframe (default 5-minute), and only that single first bar's range is captured. Statistical Level Calculation The indicator maintains a rolling array of the last N session's first bar ranges (default: 60 sessions). For each new session, it calculates: Average Range: Mean of historical first bar ranges Standard Deviation: Volatility of those ranges Projection Levels: High/Low ± (Average Range + Std Dev × Multiplier) This provides probability-based levels. For example, a +2σ level suggests: "Historically, price extending this far beyond the opening range is a 2-standard-deviation event (approximately 95th percentile)." Fibonacci Extensions Using the first bar range as the base unit (100%), the indicator projects Fibonacci levels: 100% extension: One full range above the high / below the low 1.618x extension: (Default) Golden ratio projection 2.618x, 3.618x extensions: Additional Fibonacci levels Calculation: Range = H - L, then Target = H + (Range × Multiplier) for upside projections. OR Rotation Levels These are fixed-point increments from the first bar's high and low. Unlike percentage-based methods, rotations use absolute point values: NQ traders often use 65-point increments ES traders often use 15-point increments Gold/bonds use different values The indicator draws 5 levels above the high (R+1 through R+5) and 5 below the low (R-1 through R-5), each separated by your specified point increment. Features: Session Options Pre-configured Sessions: New York RTH (9:30am - 4:00pm) New York Futures (8:00am - 5:00pm) London (2:00am - 8:00am) Asia (7:00pm - 2:00am) Midnight to 5pm ZB/Gold/Silver OR (8:20am - 4:00pm) CL OR (9:00am - 4:00pm) Custom Session: Define your own start/end times in HHMM format Timezone Support: All sessions respect the selected timezone (default: America/New_York) Customizable Timeframe Select any timeframe for the first bar (1min, 5min, 15min, etc.) Default: 5-minute bars Important: This is the timeframe for the first bar capture, independent of your chart's timeframe Display Options Historical Ranges: Show/hide past session ranges (with configurable limit to manage performance) Line Styles: Choose between Solid, Dashed, or Dotted for range lines and midline Label Position: Left or Right side of range Show Prices: Optionally display actual price values on labels Custom Colors: Fully customizable colors for all components Statistical Levels Lookback Period: Number of historical sessions to analyze (default: 60) Two Multiplier Levels: Default 1σ and 2σ, fully adjustable Separate styling: Different line styles (dashed vs dotted) for each sigma level Optional Labels: Show/hide sigma notation labels Fibonacci Extensions Four Extension Levels: 100%, 1.618x, 2.618x, 3.618x (all customizable) Bidirectional: Projections both above and below the opening range Optional Labels: Toggle percentage/multiplier labels OR Rotation Levels Configurable Increment: Set the point value for your instrument Five Levels Each Direction: R±1 through R±5 Dynamic Labels: Show both rotation number and point value (e.g., "R+1 (65)") Three Line Styles: Solid, Dashed, or Dotted How to Use Setup Add the indicator to your chart Select your trading session from the dropdown Set the timeframe for first bar capture (typically 5-15 minutes) Configure which projection methods you want to see (Statistical, Fibonacci, and/or Rotations) For Day Traders Scenario: Trading NQ during New York RTH Session: Select "New York RTH (9:30am - 4:00pm)" Timeframe: 5-minute (captures 9:30-9:35 bar) Enable: OR Rotations with 65-point increments Strategy: Watch for acceptance/rejection at rotation levels Use R+1/R-1 as initial profit targets R+2/R-2 as extended targets Statistical levels show when price is in "outlier" territory and rotation levels Performance Notes The indicator limits objects to stay within TradingView's constraints (500 max) If you enable all features, reduce "Maximum Historical Ranges" to prevent slowdown Typical configuration: 10-20 historical ranges with all features enabled works well Settings Guide Session Settings Session: Choose from pre-configured sessions or "Custom" Custom Session Start/End: HHMM format (e.g., "0930" for 9:30am) Timezone: Critical for accurate session detection Opening Bar Format Timeframe: The bar size for capturing the first bar's range Show Midline: Toggle the mid-point line Show Historical Ranges: Display previous sessions (recommended: leave ON) Maximum Historical Ranges: Limit history to manage performance (1-500) Range Style / MidLine Style: Solid, Dashed, or Dotted Position: Label placement (Left or Right) Show Prices: Include actual price values on labels Statistical Levels Lookback Periods: How many historical first bar ranges to analyze (default: 60) Std Dev Multiplier 1/2: The sigma levels to project (default: 1.0 and 2.0) All visual settings (colors, line width, label size) Fibonacci Extensions Show Fib Extensions: Enable/disable Fibonacci projections Measured Move Extensions 1-4: The multipliers (default: 1.618, 2.618, 3.618, 4.618) Visual customization options OR Rotations Rotation Increment: The point value for your instrument NQ: 65 points ES: 15 points Adjust for other instruments based on their typical rotation behavior Show Rotation Labels: Display level numbers and point values Visual customization options Use Cases Gap Trading: When price gaps away from previous day's close, the first bar range shows the initial gap acceptance/rejection zone Breakout Confirmation: Price breaking and holding above the first bar high with volume suggests trend day potential. Rotation levels provide measured targets. Reversal Identification: Price reaching +2σ statistical level = rare event, potential exhaustion Range Bound Days: Price oscillating between first bar high/low suggests range-bound session; trade reversals at extremes Institutional Level Awareness: OR Rotations at 65 points (NQ) align with levels professional traders watch Technical Notes The indicator uses request.security() with lookahead=barmerge.lookahead_on to ensure the first bar levels are captured correctly All drawing objects (lines, labels, fills) are managed in arrays with automatic cleanup to prevent memory issues The statistical calculations use array.avg() and array.stdev() for accurate probability estimates Rotation levels use individual line variables (like Fibonacci) rather than loops for reliability Summary This indicator is original in its combination of three distinct methodologies for projecting levels from a session's opening range: Statistical Analysis - No other opening range indicator (to our knowledge) calculates standard deviation projections from historical first bar ranges Time-Based Session Flexibility - Most OR indicators use only daily or fixed time periods; this allows any custom session window Multiple Projection Methods - Traders can use statistical, Fibonacci, AND rotation levels together or separately
Pine Script® Indikator
von lucymatos
1
BTC - Institutional Cost Corridor (Overlay)BTC - Institutional Cost Corridor | RM Strategic Context The approval of Spot Bitcoin ETFs on January 11, 2024, signaled the beginning of the "Institutional Era." Since then, price discovery has shifted from being purely retail-driven to being heavily influenced by massive, off-chain equity flows. The Institutional Cost Corridor is an approach for a quantitative tool designed to solve the problem of "Institutional Blindness" by mapping the aggregate cost basis of Wall Street's entry. It allows for the identification of structural "gravity zones" where institutional capital is most likely to move from a state of profit into a state of defense. The Methodology: Data Selection & Weighting To ensure the output is statistically significant, the data engine focuses exclusively on the "Big 3" liquidity providers: BlackRock (IBIT), Fidelity (FBTC), and Bitwise (BITB). These three funds represent over 80% of total Spot ETF liquidity. A weighted ratio is applied (prioritizing BlackRock) to reflect the reality that a dollar flowing into IBIT has a significantly higher impact on market structure than a dollar in smaller, fragmented funds. This ensures the indicator follows the actual mass of institutional capital. Recalculating the Shadow: Nominal Price & AUM A common point of confusion is that Bitcoin ETFs have a completely different nominal price than Bitcoin itself (e.g., an IBIT share may trade at $50 while BTC is at $100,000). To solve this, the script does not look at the dollar price of the shares. Instead, it uses Assets Under Management (AUM) and Relative Performance Mapping . By calculating the percentage growth of the funds' underlying value since inception and projecting that growth onto the Bitcoin price axis, the script "re-scales" the institutional entry levels. This allows us to see exactly where Wall Street is "underwater" on a standard Bitcoin chart. The Mathematical Foundations: Genesis vs. Anchored The indicator utilizes two distinct mathematical approaches to triangulate the "Truth" of institutional positioning. These are not arbitrary assumptions, but forward-mapped models verified against professional financial benchmarks. 1. Conservative Floor (Genesis Mode) • The Logic: This model uses a Cumulative Inflow VWAP . It treats every dollar that has entered the ETFs since Day 1 as part of a single, massive ledger. • Scientific Justification: This approach maps to the "Fortress Zone" of early, high-conviction capital. Historical AUM performance data suggests that the largest influx of structural capital occurred during the launch phase of 2024. This logic identifies the Ultimate Floor —the level where the entire ETF cohort would flip to a net loss. In late 2025 research (e.g., Glassnode "True Market Mean"), this model consistently aligns with the deepest structural support of the bull cycle. 2. Wall Street Entry (Anchored Mode) • The Logic: This model utilize a Relative Performance Anchor . It synchronizes the Bitcoin price on Launch Day with the growth performance of the ETF fund shares. • Scientific Justification: This approach identifies the "Active Participant Basis." It reflects the entry price for the capital that fueled the most recent expansion cycles. It maps directly to the "Active Investors' Realized Price" cited by institutional research firms, identifying the immediate psychological "pain threshold" for the current market majority. 3. Institutional Mean (Hybrid Mode) • The Logic: A 50/50 mathematical blend of the Conservative Floor and the Wall Street Entry . • Justification: This is the "Equilibrium Zone." It serves as a neutral baseline by balancing early-stage "Genesis" conviction with late-cycle volatility. It represents the median cost basis of all current institutional holders. 4. The Shadow Corridor (Full Range) • The Logic: Visualizes the entire spread between the Conservative Floor and the Wall Street Entry. • Justification: The "Structural Support Cloud." Instead of a single price, it defines a regime . As long as Bitcoin remains above this cloud, the institutional trend remains in an "Expansion Phase." A re-entry into this corridor suggests a transition from a trending market into a value-accumulation phase. Tactical Playbook: Scenario Logic The Shadow Corridor (Full Range) visualizes the area between these two models, creating an "Institutional War Zone." • Active Support Test: When price tests the Wall Street Entry (upper boundary), it indicates the active institutional majority is at breakeven. Expect significant defensive buying (bids) as funds protect their yearly performance reports. • Deep Value Regime: Trading inside the Corridor is defined as a "Value Regime." This is where institutional accumulation historically absorbs retail capitulation. • The Premium Trap: When the distance between price and the Corridor exceeds 35-40%, the market is "speculatively overextended," signaling a high probability of mean-reversion. • Macro Breakdown: A Weekly (1W) candle closing below the Conservative Floor (lower boundary) signals a structural trend shift, indicating the majority of ETF-era capital is officially in a drawdown. Operational Recommendation Best viewed on the Daily (1D) timeframe for macro structural analysis, providing the most reliable signal for institutional defense zones. Tags: bitcoin, btc, etf, blackrock, ibit, institutional, cost-basis, vwap, macro, cycle, realized-price, Rob Maths
Pine Script® Indikator
von Rob_Maths
SB A / A++ ALERT ENGINE (Alerts Only)SB A / A++ Alert Engine Session-Based Level Rejection Strategy (Automation-Ready) Overview The SB A / A++ Alert Engine is a rules-based TradingView indicator designed to identify high-probability institutional-style reversal trades using Stacey Burke–inspired concepts such as previous day levels, session structure, opening ranges, and round numbers. This tool is alerts-only by design, making it ideal for: TradingView alerts Webhook automation Telegram / Discord signal delivery External trade execution systems It does not repaint and evaluates signals on confirmed bar close only. --- Core Trading Idea Price frequently reacts at important reference levels during active trading sessions. This script looks for rejection + confirmation at those levels and grades setups based on confluence and candle quality. Only A-grade and A++-grade setups are alerted. --- What the Script Detects 📌 Key Levels (Confluence Engine) Previous Day High / Low Initial Balance (Mon–Tue range, active Wed–Fri) Session Opening Range (first hour of London / NY) Round Numbers (configurable tick spacing) Each level touched contributes to confluence — without double-counting the same zone. --- 🕒 Session Control Signals are only allowed during: London Session New York Session Includes: Session resets Max alerts per session Cooldown between signals --- 🔎 Candle Confirmation Valid signals require clear rejection behavior, such as: Bullish / Bearish Engulfing candle Strong Pin Bar (wick ≥ 2× body) --- 🧠 Trade Grades A Trade Valid session ATR percentile filter passed ≥ 1 level of confluence Directional rejection A++ Trade All A-Trade rules Strong confirmation candle (engulf or pin) ≥ 2 independent confluence zones Grades are displayed visually and included in alert payloads. --- 📊 Volatility Filter (ATR Percentile) Instead of fixed ATR thresholds, the script uses an ATR percentile rank, ensuring trades only trigger when volatility is above normal for that market. This adapts automatically across: Forex Indices Futures Crypto --- Visual Output ▲ Green / Lime triangles → LONG (A / A++) ▼ Orange / Red triangles → SHORT (A / A++) Color intensity reflects trade grade Optional session shading (if enabled) --- Alerts & Automation All alerts are webhook-ready and structured for automation. Each alert includes: Symbol Timeframe Direction (LONG / SHORT) Trade grade (A or A++) Confluence count Entry price (close of signal bar) Designed to integrate with: Telegram bots Trade execution bridges Risk management engines --- What This Script Is (and Is Not) ✅ IS A high-quality signal engine Non-repainting Automation-friendly Institutional level-based logic ❌ IS NOT A scalping indicator A prediction tool A “trade every candle” system This tool favors patience, structure, and quality over frequency. --- Recommended Usage Timeframes: M5 – M15 Best markets: FX majors, indices, liquid crypto Combine with your own execution, risk, and trade management rules --- ⚠️ Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice. Always test on demo or paper trading before using live capital.
Pine Script® Indikator
von Accrue
Price Levels [TickDaddy]I hope you enjoy this indicator as much as I do! it draws out price levels to your liking, by ticks or points, how many ticks/points between levels, very customizable. it also has an info box showing how many ticks/points between levels as well as dollar amount for that level, and you can change contract size as well as micros or minis just to see if price moved that distance, what you can expect to make. any feedback greatly appreciated.
Pine Script® Indikator
von TickDaddy
Volume And ROC Surge DetectorSharing this indicator I made for myself. Volume and ROC are early indicators of long moves. When ROC + Volume happens together, it's BOOM. This indicator called, Volume + ROC Surge Detector is a real-time momentum alert indicator designed to spot early institutional activity and explosive price moves. It combines Volume Surge analysis with Price Rate of Change (ROC) to identify when price and participation align. The script monitors abnormal volume relative to a moving average and confirms direction using ROC strength. When both volume expansion and directional momentum occur together, it triggers high-confidence “Boom” signals for bullish or bearish moves. To avoid noise, the indicator includes state-based alert control, ensuring each signal fires only once per condition change and only in real-time, not on historical bars. Key Features 1. Detects bullish and bearish ROC momentum shifts 2. Identifies positive and negative volume anomalies 3. Flags combined Volume + ROC “Boom” events 4. Real-time alerts only (no repaint, no bar-close spam) 5. Duplicate alert prevention using internal state tracking 6. Clean on-chart visual markers for instant recognition. Disable visuals for cleaner chart. Best Use Cases: 1. Catching breakouts and breakdowns early 2. Spotting smart money participation 3. Momentum confirmation for trend, intraday, and swing trading 4. Works across stocks, crypto, and indices Alerts: 1. ROC Bullish Alert When it fires: Price Rate of Change (ROC) crosses above the positive ROC threshold Alert messages: 🟢 ROC Change Bullish → TICKER @ price What it means: Price momentum has turned strongly bullish. Early sign of upside acceleration 2. ROC Bearish Alert When it fires: Price ROC crosses below the negative ROC threshold Alert message: 🔴 ROC Change Bearish → TICKER @ price What it means: Price momentum has turned strongly bearish. Early sign of downside acceleration 3. Positive Volume Surge Alert When it fires: Current volume exceeds Average Volume × Volume Surge Multiplier Alert message: 📈 +Ve Vol Change → TICKER @ volume What it means: Unusual participation / smart money activity. Strength entering the move 4. Negative Volume Alert (Volume Dry-Up) When it fires: Current volume drops below Average Volume ÷ Volume Surge Multiplier Alert message: 📉 -Ve Vol Change → TICKER @ volume What it means: Participation is fading. Trend exhaustion or consolidation risk 5. Boom Bull Alert (High-Conviction Signal) When it fires: Both conditions occur together: Bullish ROC AND Volume Surge (high participation) Alert message: 💥 Boom Volume + ROC Bull → TICKER @ price What it means: Momentum + volume alignment. Strong breakout / continuation probability 6. Boom Bear Alert (High-Conviction Signal) When it fires: Both conditions occur together: Bearish ROC AND Volume Surge (high participation) Alert message: 💣 Boom Volume + ROC Bear → TICKER @ price What it means: Momentum + volume alignment to the downside. Strong breakdown / continuation probability This indicator is built for traders who want clarity, speed, and signal discipline—not lagging confirmations or noisy alerts.
Pine Script® Indikator
von arupnj2018
BTC Valuation ZonesBTC Valuation – Distance From 200 MA This indicator provides a simple but powerful Bitcoin valuation framework based on how far price is from the 200-period Moving Average, a level that has historically acted as Bitcoin’s long-term equilibrium. Instead of predicting tops or bottoms, this tool focuses on mean-reversion behavior: When price deviates too far above the 200 MA → risk increases When price deviates deeply below the 200 MA → long-term opportunity increases
Pine Script® Indikator
von LeonardoDaTrader
SR Channel + EMA + RSI MTF + VolHighlightSR + Volume + RSI MTF – edited by Mochi This indicator combines three tools into a single script: SR Zones from Pivots Automatically detects clusters of pivot highs/lows and groups them into support and resistance zones. Zone width is tightened using a percentage of the pivot cluster range so levels are more precise and cleaner. Each zone includes: A colored box (SR area), A dashed midline, A POC line (price level with the highest traded volume inside the zone), A label showing the zone price and distance (%) from current price. Zone color is dynamic but simple and stable: If price closes below the mid of the zone → it is treated as resistance (red). If price closes above the mid of the zone → it is treated as support (green). Box, lines, and label always share the same color. Volume Inside the Zone + POC Calculates buy/sell volume for candles whose close lies inside each zone. Uses abs(buyVol − sellVol) / (buyVol + sellVol) to measure volume imbalance and control box opacity: Stronger, more one‑sided volume → darker box (stronger zone). POC is drawn as a thin line with the same color as the zone to highlight the best liquidity level for entries/TP. Multi‑Timeframe RSI Dashboard Shows RSI(14) values for multiple timeframes (1m, 5m, 15m, 30m, 1h, 4h, 8h, 1d), each can be toggled on/off. Background color of each RSI cell: RSI > 89 → red (strong overbought), 80–89 → orange (warning area), RSI < 28 → lime (strong oversold), Otherwise → white (neutral). The goal of this script is to give traders a clear view of: Key support/resistance zones, Their volume quality and POC, And multi‑TF overbought/oversold conditions via the RSI dashboard – all in one indicator to support retest/flip‑zone trading.
Pine Script® Indikator
von xmochi1