Auf geht's

On Balance Volume (OBV)

Phantom Support & Resistance Auto [PT-IND-SR.001]Overview Phantom Support & Resistance Auto is a context-focused support and resistance indicator designed to visualize price interaction zones derived from multiple market behaviors. The script does not generate buy or sell signals. Instead, it provides a structured map of potential reaction areas, allowing traders to better understand where price has historically reacted, consolidated, or extended liquidity. This indicator is intended to be used as a decision-support and contextual analysis tool, not as a standalone trading system. How the Script Works The indicator combines several independent but complementary methods of identifying support and resistance. Each method captures a different type of market behavior, and all components can be enabled or disabled independently. 1) High / Low Zones (Range Extremes) This module tracks the highest high and lowest low over a configurable lookback period. These levels represent recent range boundaries, which often act as reaction zones during consolidation or pullbacks. They are visualized as extended horizontal levels to preserve historical context. 2) Pivot Zones (Filtered & Merged Levels) Pivot zones are derived from confirmed pivot highs and lows. To avoid excessive and overlapping levels, the script applies a merge tolerance based on either: ATR distance, or Percentage distance from price Nearby pivot levels are merged into a single zone, and each zone tracks how many times price has interacted with it. This interaction count adjusts visual strength, creating a relative importance hierarchy rather than treating all levels equally. An optional higher-timeframe source can be used to project structurally significant levels onto lower timeframes. 3) Wick Liquidity Zones This module detects candles with disproportionately large wicks relative to their bodies. Such candles often indicate liquidity grabs, stop runs, or rejection areas. Detected wick levels are extended forward to highlight areas where liquidity was previously absorbed. This component focuses on price rejection behavior, not trend direction. 4) PR Levels (Volatility-Adjusted Predicted Ranges) PR levels are derived from a volatility-adjusted average price model. Using ATR as a normalization factor, the script calculates a central average along with upper and lower projected zones. These levels are adaptive, expanding and contracting with volatility, and are intended to represent probabilistic price ranges, not fixed targets. 5) MACD-Based Support & Resistance (Heikin Ashi Source) This module derives dynamic support and resistance levels based on MACD momentum shifts, calculated from Heikin Ashi price data to reduce noise. When MACD momentum transitions occur, recent highs and lows are captured and projected as potential reaction zones. This component focuses on momentum-driven structural changes, rather than static price levels. Why These Components Are Combined Each component captures a different dimension of market behavior: High / Low zones → Range extremes Pivot zones → Structural reaction points Wick zones → Liquidity and rejection behavior PR levels → Volatility-normalized price ranges MACD S&R → Momentum-based structural shifts By combining these sources, the indicator provides a layered view of support and resistance, allowing traders to evaluate confluence, alignment, or divergence between different types of levels instead of relying on a single method. The script does not assume all levels are equal; visual weighting helps distinguish structural levels from situational ones. Visualization & Outputs Color-coded horizontal zones with strength-based opacity Optional glow effects for visual clarity Independent toggles for each S&R source A table showing percentage distances between projected PR levels, helping users contextualize price location within its current range All visual components are configurable and can be selectively disabled to reduce chart clutter. How to Use Use this indicator as a context and mapping tool Observe areas where multiple zone types align for higher contextual significance Combine with your own entry logic, confirmations, and trade management rules Suitable for multi-timeframe analysis and market structure studies Risk Management Notice This indicator should always be used as part of a well-defined risk management plan. Support and resistance zones represent areas of potential interaction, not guaranteed reactions. Users are responsible for applying appropriate: Position sizing Stop placement Risk-to-reward rules The indicator does not manage risk automatically and should not replace proper risk management practices. What This Script Is NOT It is not a buy/sell signal generator It does not predict future price direction It does not guarantee reactions at every level It should not be used as a standalone trading strategy Originality & Purpose The originality of this script lies in its structured integration of multiple support and resistance methodologies, each preserved as a distinct analytical layer rather than blended into a single opaque output. The purpose is to help traders understand where price has interacted with liquidity, structure, and volatility, not to automate trade decisions.
Pine Script® Indikator
von Phantom_Trader_Global
Ranked Exchange Volume (REV)📊 Ranked Exchange Volume (REV) - Multi-Venue Volume Distribution Visualizer ## Stop Guessing Where the Real Volume Is. See It. Most traders look at aggregate volume and miss the critical story: **where** that volume actually traded. Ranked Exchange Volume (REV) solves this by revealing the complete liquidity landscape across multiple trading venues in a single, elegant visualization. This isn't just another volume indicator—it's a **dynamic stratified histogram** that automatically reorganizes exchange layers by magnitude on every bar, showing you **instant market dominance** at a glance. --- ## 🎯 The Core Innovation: Self-Organizing Volume Layers REV displays volume from up to 10 different exchanges as **stacked, color-coded bars** where the largest volume source literally rises to the top. Watch as exchanges compete for dominance in real-time: - **Largest volume = Top of the bar** (most visible position) - **Smallest volume = Bottom of the bar** (foundation layer) - **Everything in between = Automatically sorted on every candle** This visual hierarchy makes it instantly obvious which venues are leading the market—no mental math required. --- ## ✨ Key Features ### 🔄 **Dynamic Layer Sorting** Unlike static stacked charts, REV uses real-time stratification. If Binance had 60% of volume last bar but Coinbase takes 70% this bar, you'll see Coinbase jump to the top. The hierarchy reflects current reality, not a fixed order. ### 🎨 **10 Fully Customizable Exchange Slots** Each exchange slot offers complete control: - **Enable/Disable toggle** - Turn exchanges on/off without losing your configuration - **Custom prefix** - Track ANY exchange on TradingView (BINANCE, KRAKEN, OANDA, FXCM, etc.) - **Custom suffix** - Specify quote currency (USDT, USD, EUR, or leave blank for stocks/forex) - **Display name** - Control how exchanges appear in the rankings table - **Color selection** - Match your chart theme or use brand colors for instant recognition ### 📊 **Live Rankings Table** A real-time leaderboard shows: - **Rank** - Current position (1 = highest volume) - **Exchange name** - With color-coded background - **Volume** - Intelligently formatted with K/M/B units - **Percentage** - Exact market share **Table positioning:** Choose from 9 screen positions (top/middle/bottom × left/center/right) to keep your chart clean. ### 🧮 **Intelligent Volume Formatting** REV automatically detects volume magnitude and applies the appropriate scale: - **Billions** - Displays as "1.5B" for readability - **Millions** - Displays as "342.8M" - **Thousands** - Displays as "45.2K" - **Full numbers option** - Toggle to see complete values (23,456,789) The scale adjusts per-bar, so you always see the clearest representation. ### 🚨 **Three Built-In Alert Conditions** 1. **Exchange Dominance Alert (>50%)** - Triggers when a single venue controls majority of volume - Signals potential liquidity concentration risk or exchange-specific events 2. **Volume Spike Alert (>2x average)** - Detects unusual aggregate activity across all venues - Catches breakouts, news events, or institutional flow 3. **Liquidity Migration Alert** - Fires when market leadership shifts between exchanges - Reveals arbitrage opportunities or changing market structure ### 📈 **Optional Total Volume Line** Display aggregate volume from all exchanges as a reference overlay with customizable color. --- ## 🌍 Market Compatibility: Beyond Crypto While optimized for cryptocurrency (its primary design), REV works across multiple asset classes: ### ✅ **Cryptocurrency (Perfect Fit)** **Why it excels:** Crypto trades 24/7 across dozens of global exchanges simultaneously. REV reveals true price discovery. **Example configurations:** - **BTC/USDT:** Compare Binance, Coinbase, OKX, Bybit, Kraken, Bitget - **ETH/USD:** Track institutional venues (Coinbase, Kraken, Gemini) vs retail (Binance, Gate.io) - **Altcoins:** Identify which exchanges have the deepest liquidity before placing large orders **Trading applications:** - **Arbitrage detection** - Spot when volume migrates between venues (price differential opportunities) - **Exchange risk** - Don't trade on exchanges with suspiciously low volume - **Whale tracking** - Sudden Coinbase dominance often signals institutional activity - **Market maker identification** - Consistent Binance leadership suggests MM concentration ### ✅ **Forex (Excellent Fit)** **Why it works:** Forex doesn't have centralized exchanges—it trades OTC across multiple broker feeds. REV shows which data providers are seeing the action. **Example configurations:** - **EUR/USD:** Compare OANDA, FXCM, FOREX.COM, FX_IDC, CAPITALCOM - **GBP/JPY:** Track volatility across broker feeds - **Exotics:** Verify liquidity before trading thin pairs **Setup notes:** - Leave **suffix field blank** for forex - Use broker prefixes: OANDA, FXCM, FOREXCOM, FX_IDC, SAXO - Symbol constructs as "OANDA:EURUSD" **Trading applications:** - **Spread verification** - Higher volume feeds typically offer tighter spreads - **News event tracking** - See which brokers capture the most flow during announcements - **Session analysis** - Watch London/NY volume shifts across different providers ### ⚠️ **Stocks (Limited But Useful)** **Where it works:** - **Dual-listed stocks** - Canadian companies on TSX and NYSE - **International ADRs** - Same company, different exchanges - **ETF arbitrage** - Compare volume across regional listings **Example configurations:** - **Shopify (SHOP):** Compare TSX vs NYSE volume - **Alibaba (BABA):** NYSE vs HKEX volume - **European stocks:** Compare primary exchange vs secondary listings **Setup notes:** - Leave **suffix field blank** - Use exchange prefixes: NYSE, NASDAQ, TSX, LSE, XETRA - Note: TradingView doesn't show per-venue volume for U.S. equities (NYSE vs BATS vs ARCA all aggregate) **Limitations:** Most stocks trade primarily on one exchange, so REV is less valuable than in crypto/forex. ### ❌ **Futures (Not Recommended)** Futures contracts differ by exchange (CME's ES ≠ EUREX's FESX), so volume isn't comparable. --- ## 📚 Practical Use Cases ### 1. **Pre-Trade Liquidity Analysis** Before entering a large position, check which exchanges have sufficient volume to fill your order without slippage. **Example:** You want to sell 50 BTC. REV shows Binance has 2,340 BTC volume this hour while a smaller exchange has only 87 BTC. Route your order to Binance for better execution. ### 2. **Exchange Risk Management** Identify "fake volume" or wash trading by comparing venues. **Red flag pattern:** An exchange consistently shows 10x the volume of competitors but with minimal price impact—likely artificial. ### 3. **Arbitrage Opportunity Detection** When volume suddenly concentrates on one exchange, price premiums/discounts often appear. **Alert pattern:** Liquidity Migration alert fires → Check price differences → Execute arb if spread exceeds fees. ### 4. **Institutional Flow Tracking** In crypto, institutions typically use regulated exchanges (Coinbase, Kraken, Gemini). **Pattern to watch:** Coinbase volume spikes to 60%+ dominance → Often precedes directional moves as institutions position. ### 5. **Market Structure Analysis** Watch long-term trends in exchange dominance to understand market evolution. **Example insight:** "Binance's market share has dropped from 70% to 45% over 6 months as traders diversify to OKX and Bybit." ### 6. **Event Response Comparison** During major news events, see which exchanges react first. **Analysis:** If one exchange shows volume spike 5 minutes before others, that feed may have faster news incorporation. --- ## ⚙️ Technical Specifications - **Maximum exchanges:** 10 simultaneous venues - **Sorting algorithm:** Bubble sort (O(n²) but optimal for n=10, prioritizes stability) - **Update frequency:** Real-time, every bar - **Data handling:** Gracefully ignores invalid symbols, treats NA as zero - **Chart type:** Non-overlay (separate pane below price) - **Performance:** Lightweight, no lag on any timeframe --- ## 🚀 Getting Started ### Quick Setup (5 Minutes) **For Crypto Traders (Default Configuration):** 1. Add indicator to any crypto chart (BTC, ETH, SOL, etc.) 2. Works immediately—top 10 exchanges pre-configured 3. Customize colors if desired 4. Position table to your preference **For Forex Traders:** 1. Open any forex pair (EUR/USD, GBP/JPY, etc.) 2. Go to Exchange 1 settings 3. Change prefix to "OANDA" (or your preferred broker) 4. **Clear the suffix field** (leave it blank) 5. Repeat for other exchanges (FXCM, FOREXCOM, FX_IDC, etc.) 6. Disable any unused exchange slots **For Stock Traders (Dual-Listed):** 1. Open a dual-listed stock (e.g., SHOP on TSX) 2. Exchange 1: Prefix = "TSX", Suffix = blank, Name = "Toronto" 3. Exchange 2: Prefix = "NYSE", Suffix = blank, Name = "New York" 4. Disable exchanges 3-10 5. Compare volume distribution ### Advanced Customization **Tracking Regional Markets:** Want to compare Korean vs Japanese crypto exchanges? - Exchange 1: UPBIT (Korean) - Exchange 2: BITHUMB (Korean) - Exchange 3: BITFLYER (Japanese) - Exchange 4: COINCHECK (Japanese) **Isolating Institutional Volume:** Focus only on regulated U.S. exchanges: - Enable: Coinbase, Kraken, Gemini - Disable: All others - Watch for >50% dominance alerts --- ## 👥 Who Is This For? ### ✅ **Perfect for:** - **Crypto day traders** - Need to know where liquidity actually is - **Arbitrage traders** - Spot cross-exchange inefficiencies - **Institutional traders** - Validate execution venues before large orders - **Forex scalpers** - Compare broker feeds for best execution - **Market structure analysts** - Track long-term exchange dominance trends ### ❌ **Less useful for:** - **Long-term investors** who don't care about short-term liquidity - **Single-exchange traders** who never compare venues - **Futures traders** (contracts differ by exchange) --- ## 🎓 Understanding the Visualization **What each colored segment means:** Each horizontal stripe represents one exchange's volume contribution. The **height** of each stripe shows that exchange's volume relative to others. **Reading the pattern:** - **Dominant top layer** (50%+ of bar) = Clear market leader - **Evenly distributed layers** (10-15% each) = Fragmented liquidity - **Sudden layer reorganization** = Liquidity migration event - **Shrinking bottom layers** = Exchanges losing market share **Color coding strategy:** The indicator defaults to exchange brand colors for instant recognition: - Yellow = Binance (their signature gold) - Blue = Coinbase (their brand blue) - Purple = Kraken (their brand purple) - etc. You can customize all colors to match your chart theme. --- ## 🔧 Configuration Tips ### **Best Practices:** 1. **Start with defaults** - Test on BTC/USDT to understand behavior 2. **Disable unused exchanges** - Cleaner visualization, faster computation 3. **Match your trading venues** - Only track exchanges you actually use 4. **Use brand colors initially** - Helps build visual pattern recognition 5. **Enable alerts strategically** - Don't spam yourself; focus on actionable signals ### **Common Mistakes to Avoid:** ❌ Tracking too many irrelevant exchanges (creates visual noise) ❌ Forgetting to clear suffix for forex/stocks (symbol won't construct properly) ❌ Using the same color for multiple exchanges (defeats instant recognition) ❌ Hiding the table permanently (you lose the percentage data) --- ## 📊 Performance Notes - **Lightweight computation** - No impact on chart performance - **Works on all timeframes** - 1-minute to monthly - **Historical analysis** - Full bar history available (max_bars_back=5000) - **Multi-monitor friendly** - Table positioning adapts to any screen layout --- ## 🆕 Future Enhancements (Planned) While the current version is feature-complete, potential additions include: - Volume-weighted average price (VWAP) overlay per exchange - Historical dominance charts (which exchange led most this week/month) - Correlation matrix (do exchanges move together or independently?) **User feedback shapes development** - Comment with your requests! --- ## 💡 Pro Tips ### **Tip 1: The "Whale Exchange" Filter** In crypto, institutions use Coinbase/Kraken. Enable ONLY these two exchanges to isolate professional flow and ignore retail noise. ### **Tip 2: The "Arbitrage Scanner"** Set Liquidity Migration alert on 1-minute timeframe. When it fires, check price across exchanges—often there's a temporary premium/discount. ### **Tip 3: The "Liquidity Gauge"** Before placing a large market order, switch to 5-minute timeframe and check last 10 bars. If your target exchange consistently has <20% of volume, you'll face slippage. ### **Tip 4: The "Market Structure Tracker"** Take screenshots of the table weekly. Over time, you'll see exchange market share trends that reveal fundamental shifts in trader preferences. ### **Tip 5: The "News Event Validator"** During major announcements (Fed decisions, earnings, etc.), watch which exchange shows volume first. That's where informed traders are positioned. --- ## 🎯 Summary **Ranked Exchange Volume (REV) transforms volume analysis from a single number into a complete market microstructure view.** Instead of seeing "1.2M volume," you see: - Binance: 640K (53%) - Coinbase: 280K (23%) - OKX: 180K (15%) - Bybit: 100K (9%) **That's actionable intelligence.** Whether you're executing a large crypto trade, arbitraging forex across brokers, or validating liquidity before buying a dual-listed stock, REV shows you **where the market actually is**—not where you assume it is. --- ## 📖 Quick Reference Card | Feature | What It Does | Why It Matters | |---------|-------------|----------------| | **Dynamic Sorting** | Largest volume rises to top | Instant dominance identification | | **10 Custom Slots** | Track any exchanges | Works for YOUR trading venues | | **Live Rankings** | Real-time leaderboard | Precise market share data | | **Smart Formatting** | Auto K/M/B scaling | Always readable, never cluttered | | **Dominance Alert** | Warns at >50% concentration | Risk management for large orders | | **Migration Alert** | Fires on leadership change | Arbitrage opportunity signal | | **Spike Alert** | Detects 2x volume surges | Breakout/news confirmation | | **Total Line** | Shows aggregate volume | Reference for overall activity | | **Table Positioning** | 9 screen locations | Adapts to your layout | | **Full/Short Toggle** | Complete vs abbreviated numbers | Flexibility for different assets | --- ## ✅ Installation & Support **Install:** Add to your TradingView favorites, apply to any chart **Updates:** Automatic through TradingView **Support:** Comment with questions—active developer community **Like this indicator?** Leave a ⭐ rating and share with fellow traders who need better volume intelligence. --- **🚀 Start seeing the complete volume picture. Add Ranked Exchange Volume to your charts today.**
Pine Script® Indikator
von KevinSvenson_
1
Anchored OBV + A/DAnchored OBV + A/D is a single-pane indicator that allows On-Balance Volume (OBV) and Accumulation/Distribution (A/D) to be plotted together using a period-anchored approach. OBV and A/D are cumulative by nature, which makes their full-history absolute values arbitrary and often incomparable when plotted side-by-side . This script addresses that limitation by anchoring each indicator to a user-defined period (daily, weekly, monthly, etc.) and plotting their relative change from that baseline rather than their raw values. The result is a comparison that preserves each indicator’s internal structure (trends, inflections, and divergences) while minimizing scale conflicts. How it Works At the start of each selected anchor period, the script records the current OBV and A/D values as baselines. All subsequent values are plotted as changes relative to those baselines: - Percent mode measures the % change from the baseline. - Delta mode measures the absolute change from the baseline. Optional anchor markers and a zero line make it easy to see when resets occur and how each indicator behaves relative to the period’s starting point. Advantages vs using OBV and A/D separately - Direct visual comparison: Both indicators are on the same anchored scale, making relative movement immediately readable. - Preserved analytical structure: Trends, inflections, and divergences remain intact; time-based shape is not distorted. - Cleaner workflow: One indicator, one pane, and less chart clutter. Interpretation - Values above zero indicate net accumulation or positive volume pressure since the anchor. - Values below zero indicate net distribution or negative volume pressure since the anchor. - Trend confirmation: Rising price accompanied by rising anchored OBV and A/D suggests healthy participation. - Price Divergence: Price making new highs or lows while one or both indicators fail to confirm can indicate weakening participation or a potential change in behavior. - OBV vs A/D Interaction: When both move together, volume and close-location effects broadly agree. When they diverge, it highlights differences between net up/down volume (OBV) and intrabar accumulation/distribution (A/D). Warnings! - Percent mode can become visually unstable when baseline OBV or A/D values are near zero due to division effects inherent in percent-change calculations. - It is not recommended to interpret structure across periods as each period is relative to a different baseline. Structure is not preserved across periods - only within each individual period. Credits This script is inspired by Multi-Ticker Anchored Candles (MTAC) by @SamRecio . MTAC's anchored-baseline concept and open-source nature provided an important conceptual foundation for adapting the same idea to OBV and A/D. Many thanks to @SamRecio for publishing his work openly.
Pine Script® Indikator
von Zeallot
On Balance Volume (with Candles)OBV+ is an enhanced On Balance Volume indicator that visualizes volume flow either as a line or candlestick-style OBV bars. It shows whether volume is accumulating or distributing, and includes optional moving-average smoothing and Bollinger Bands on OBV to identify trend direction, consolidation, and breakout strength. Use-Cases This indicator is especially useful for: Bullish setup: Price sideways + OBV rising → accumulation Bearish setup: Price rising + OBV flat/falling → distribution Breakout confirmation: Price breakout + OBV breaking BB → high conviction move Options selling filter: Flat OBV + compressed BB → range-bound market
Pine Script® Indikator
von ganeshb9001
SNIPER Initial Balance V1SNIPER INITIAL BALANCE V1 ### What It Does Draws the first hour's high/low range with extensions and breakout signals. ### IB Times (Auto-Selected) | Market Type | IB Period (ET) | |-------------|----------------| | Index (ES/NQ/YM) | 9:30 - 10:30 | | Gold (GC/MGC) | 8:30 - 9:30 | | Energy (CL) | 9:00 - 10:00 | ### Levels Drawn | Level | Style | Purpose | |-------|-------|---------| | IB High | Solid | Resistance | | IB Low | Solid | Support | | IB Mid | Dashed | Mean reversion | | 50% Ext | Dotted | Target 1 | | 100% Ext | Dotted | Target 2 | | 1SD (1.28x) | Dashed | 80% range | | 2SD (2.0x) | Dashed | 95% range | ### Signals | Signal | Meaning | Action | |--------|---------|--------| | `IB↑` | Breakout above IB High | Look for long | | `IB↓` | Breakout below IB Low | Look for short | | `RT↑` | Retest long entry | **BEST ENTRY** - Go long | | `RT↓` | Retest short entry | **BEST ENTRY** - Go short | | `FK` | Fakeout warning | **AVOID** - Don't enter | ### Entry Requirements (All Must Be True) - ✅ Close above/below level (not just wick) - ✅ Volume ≥ 1.3x average - ✅ Body ≥ 60% of candle - ✅ Minimal adverse wick ### Quick Trade Plan ``` LONG: Wait for RT↑ → SL below IB Low → TP at 50% or 100% ext SHORT: Wait for RT↓ → SL above IB High → TP at 50% or 100% ext ``` ---
Pine Script® Indikator
von alexandrodisla
HTF BIAS FILTER🧭HTF Bias Filter Indicator: 5 in 1 indicator Technical Overview The Bias Filter is a comprehensive multi-timeframe tool designed to confirm directional bias using five key indicators before entering a trade. It plots higher-timeframe Moving Averages directly on the chart and provides an immediate status summary via a static dashboard. The more confluence on the dashboard, the greater the probability of the direction of the trade. 1. 📊 Display Components A. Plotted Lines The indicator uses the request.security function to draw Moving Averages from higher timeframes onto your current chart: 1H EMA 21 (Purple): The 21-period Exponential Moving Average calculated on the 1-Hour (60 min) chart. Plotted using a step-line style. 4H EMA 50 (Red): The 50-period Exponential Moving Average calculated on the 4-Hour (240 min) chart. Plotted using a step-line style. B. Directional Dashboard A fixed-position summary table is anchored to the bottom-right corner of the chart, providing a quick glance at the current status of all five filters. 2. 🎨 Colour Logic Each of the five indicators is assigned a colour based on its current directional signal. The more indicators that show the same colour (confluence), the stronger the signal and the higher the likelihood of a high-probability trade. 🟢 Green indicators are signaling UP/BUY (Bullish momentum or trend). 🔴 Red indicators are signaling DOWN/SELL (Bearish momentum or trend). ⚫ Gray indicators are signaling Mixed or flat directions (neutral or undecided). Note: The dashboard's main header color is determined by a strict confluence logic (All four 4H filters must align for Green/Red), while individual indicator colors follow the simple rules above. 3. 📋 Indicator Breakdown and Logic The dashboard provides the direction of five different filters. 3.1. Higher-Timeframe (HTF) Trend Indicators These two signals determine the immediate slope and direction of the primary Moving Averages: 4H EMA 50: Timeframe: 4-Hour (240 min) Logic: Compares the current EMA value to the value two bars ago on the 4H chart. Output: UP ↑, DOWN ↓, or FLAT ⏸ 1H EMA 21: Timeframe: 1-Hour (60 min) Logic: Compares the current EMA value to the value two bars ago on the 1H chart. Output: UP ↑, DOWN ↓, or FLAT ⏸ 3.2. 4-Hour Confluence Filters These three indicators provide supplementary confirmation on Volume, Price Position, and Momentum, all calculated on the 4-Hour (240 min) chart: 4H OBV (Smoothed): Timeframe: 4-Hour (240 min) Logic: Direction is based on the current value of the 21-bar smoothed On-Balance Volume (OBV) compared to its value nine bars ago. Output: UP ↑, DOWN ↓, or FLAT ⏸ 4H ATR DIR (EMA Proxy): Timeframe: 4-Hour (240 min) Logic: Determines the price position by comparing the current Close price against the 4H EMA 50. Output: BUY 🟢 (Close > EMA 50), SELL 🔴 (Close < EMA 50), or FLAT ⏸️ (Close = EMA 50). 4H RSI (14): Timeframe: 4-Hour (240 min) Logic: Momentum check comparing the 14-period Relative Strength Index (RSI) value against the 50 level. Output: BUY 🟢 (RSI > 50), SELL 🔴 (RSI < 50), or FLAT ⏸️ (RSI = 50).
Pine Script® Indikator
von The_Tokyo_Protocol
On Balance VolumeThis indicator provides an implementation of the classic On Balance Volume (OBV) momentum indicator, enhanced with a built-in divergence detection engine. Key Features: Full Divergence Suite (Class A, B, C): The primary feature is the integrated divergence engine. It automatically detects and plots all three major types of divergences: Regular (A): Signals potential trend reversals. Hidden (B): Signals potential trend continuations. Exaggerated (C): Signals weakness at double tops/bottoms. Divergence Filtering and Visualization: Price Tolerance Filter: Divergence detection is enhanced with a percentage-based price tolerance (pivPrcTol) to filter out insignificant market noise, leading to more robust signals. Persistent Visualization: Divergence markers are plotted for the entire duration of the signal and are visually anchored to the OBV level of the confirming pivot. Note on Confirmation (Lag): Divergence signals rely on a pivot confirmation method to ensure they do not repaint. The Start of a- divergence is only detected after the confirming pivot is fully formed (a delay based on Pivot Right Bars). The End of a divergence is detected either instantly (if the signal is invalidated by price action) or with a delay (when a new, non-divergent pivot is confirmed). Multi-Timeframe (MTF) Capability: MTF OBV Line: The OBV line itself can be calculated on a higher timeframe, with standard options to handle gaps (Fill Gaps) and prevent repainting (Wait for...). Limitation: The Divergence detection engine (pivDiv) is disabled if a timeframe other than the chart's timeframe is selected. Divergences are only calculated on the active chart timeframe. Integrated Alerts: Includes 12 comprehensive alerts that trigger on the start and end of all 6 divergence types (e.g., "Regular Bullish Started", "Regular Bullish Ended"). DISCLAIMER For Informational/Educational Use Only: This indicator is provided for informational and educational purposes only. It does not constitute financial, investment, or trading advice, nor is it a recommendation to buy or sell any asset. Use at Your Own Risk: All trading decisions you make based on the information or signals generated by this indicator are made solely at your own risk. No Guarantee of Performance: Past performance is not an indicator of future results. The author makes no guarantee regarding the accuracy of the signals or future profitability. No Liability: The author shall not be held liable for any financial losses or damages incurred directly or indirectly from the use of this indicator. Signals Are Not Recommendations: The alerts and visual signals (e.g., crossovers) generated by this tool are not direct recommendations to buy or sell. They are technical observations for your own analysis and consideration.
Pine Script® Indikator
von AustrianTradingMachine
OBV (Delta or regular)This is a quite simple script to apply some choices to OBV. You can choose to use regular OBV values or you can choose to use delta OBV values. Delta OBV values calculates the delta between selling volume and buying volume per bar to find discrepancies. You can make the OBV a smoothed line or just keep the normal rigid line. Rigid line is default. A secondary smoothed OBV line is added automatically with color change if the OBV is above or below the smoothed line. You can set your desired MA from SMA, EMA, VWMA and WMA, The same will be applied to both lines if chosen to smooth them both. Both lines are editable from the styles tab (visibility, color and line type) If you for some reason don't want color change on the secondary line, chose the same color for both color 1 and 2. Simple delta OBV example: If a red bar has a long lower wick, OBV will calculate the entire bar towards bearish volume, while the delta will check if there's more buying or selling happening in total. Some times you'll be able to catch divergences in the volume which implies a reversal might be in the making. For instance more selling on a green candle making the OBV drop instead of increasing or vise versa. Hopefully someone finds is useful.
Pine Script® Indikator
von GizmoTheInvestor
1
Divergences: Price × RSI × OBV The Triple Confirmation Divergence indicator is a sophisticated momentum and volume-based tool designed to identify high-probability trend exhaustion points and potential reversals. It moves beyond traditional single-indicator divergence analysis by synthesizing signals from three core pillars of technical analysis: Price Action, Momentum, and Volume Flow. This indicator works better on the time frames: 1H, 4H, 1D, 1W and 1M.
Pine Script® Indikator
von ElliotAlgo
1
OBV Cloud v1.0 [PriceBlance]🌐 English OBV Cloud v1.0 – Free & Open-Source OBV Cloud v1.0 integrates On-Balance Volume (OBV) with a Cloud model and enhanced trend filters. It helps traders quickly identify: Money Flow Trend: OBV Cloud acts as a dynamic support/resistance zone. Trend Filters: EMA9 (short-term) and WMA45 (medium-term) directly applied on OBV. OBV–Price Divergence: Detects both regular and hidden bullish/bearish divergences. Trend Strength: Measured with ADX calculated on OBV. OBV Cloud is suitable for both swing and day trading, allowing traders to spot breakouts, reversals, or sustained trends through volume-based analysis.
Pine Script® Indikator
von priceblancetrading
2
Nirvana True Duel전략 이름 열반의 진검승부 (영문: Nirvana True Duel) 컨셉과 철학 “열반의 진검승부”는 시장 소음은 무시하고, 확실할 때만 진입하는 전략입니다. EMA 리본으로 추세 방향을 확인하고, 볼린저 밴드 수축/확장으로 변동성 돌파를 포착하며, OBV로 거래량 확인을 통해 가짜 돌파를 필터링합니다. 전략 로직 매수 조건 (롱) 20EMA > 50EMA (상승 추세) 밴드폭 수축 후 확장 시작 종가가 상단 밴드 돌파 OBV 상승 흐름 유지 매도 조건 (숏) 20EMA < 50EMA (하락 추세) 밴드폭 수축 후 확장 시작 종가가 하단 밴드 이탈 OBV 하락 흐름 유지 진입·청산 손절: ATR × 1.5 배수 익절: 손절폭의 1.5~2배에서 부분 청산 시간 청산: 설정한 최대 보유 봉수 초과 시 강제 청산 장점 ✅ 추세·변동성·거래량 3중 필터 → 노이즈 최소화 ✅ 백테스트·알람 지원 → 기계적 매매 가능 ✅ 5분/15분 차트에 적합 → 단타/스윙 트레이딩 활용 가능 주의점 ⚠ 횡보장에서는 신호가 적거나 실패 가능 ⚠ 수수료·슬리피지 고려 필요 📜 Nirvana True Duel — Strategy Description (English) Name: Nirvana True Duel (a.k.a. Nirvana Cross) Concept & Philosophy The “Nirvana True Duel” strategy focuses on trading only meaningful breakouts and avoiding unnecessary noise. Nirvana: A calm, patient state — waiting for the right opportunity without emotional trading. True Duel: When the signal appears, enter decisively and let the market reveal the outcome. In short: “Ignore market noise, trade only high-probability breakouts.” 🧩 Strategy Components Trend Filter (EMA Ribbon): Stay aligned with the main market trend. Volatility Squeeze (Bollinger Band): Detect volatility contraction & expansion to catch explosive moves early. Volume Confirmation (OBV): Filter out false breakouts by confirming with volume flow. ⚔️ Entry & Exit Conditions Long Setup: 20 EMA > 50 EMA (uptrend) BB width breaks out from recent squeeze Close > Upper Bollinger Band OBV shows positive flow Short Setup: 20 EMA < 50 EMA (downtrend) BB width breaks out from recent squeeze Close < Lower Bollinger Band OBV shows negative flow Risk Management: Stop Loss: ATR × 1.5 below/above entry Take Profit: 1.5–2× stop distance, partial take-profit allowed Time Stop: Automatically closes after max bars held (e.g. 8h on 5m chart) ✅ Strengths Triple Filtering: Trend + Volatility + Volume → fewer false signals Mechanical & Backtestable: Ideal for objective trading & performance validation Adaptable: Works well on Bitcoin, Nasdaq futures, and other high-volatility markets (5m/15m) ⚠️ Things to Note Low signal frequency or higher failure rate in sideways/range markets Commission & slippage should be factored in, especially on lower timeframes ATR multiplier and R:R ratio should be optimized per asset
Pine Script® Strategie
von fkgkekd1122
Bias + VWAP Pullback — v4 (PA + BOS/CHOCH)Simple idea: I identify the trend (bias) from the larger timeframe, and only trade pullbacks to the VWAP/EMA during liquidity (London/New York). When the trend is clear, gold moves strongly, and its pullbacks to the balance lines provide clear opportunities. Timeframe and Sessions (Cairo Time) Analysis: H1 to determine the trend. Implementation: 5m (or 1m if professional). Trading window: London Opening: 10:00–12:30 New York Opening: 16:30–19:00 (avoid the rest of the day unless there is exceptional traffic). Direction determination (BIAS) On H1: If the price is above the 200 EMA and the daily VWAP is bullish and the price is above it → uptrend (long-only). If the price is below the 200 EMA and the daily VWAP is bearish and the price is below it → bearish trend (short-only). Determine your levels: yesterday's high/low (PDH/PDL) + approximate Asia range (03:00–09:30). Entry Rules (Setup A: Trend Continuation) Asia range breakout towards Bias during liquidity window. Wait for a withdrawal to: Daily VWAP, or EMA50 on 5m frame (best if both cross). Confirmation: Confirmation low/high on 5m (HL buy/LH sell) + clear impulse candle (Body is greater than average of last 10 candles). Entry: Buy: When the price returns above VWAP/EMA50 with a confirmation candle close. Sell: The exact opposite. Stop Loss (SL): Below/above the last confirmation low/high or ATR(14, 5m) x 1.5 (largest). Objectives: TP1 = 1R (Close 50% and move the rest Break-even). TP2 = 2.5R to 3R or at an important HTF level (PDH/PDL/Bid/Demand Zone). Entry Rules (Setup B: Reversion to VWAP – “Mean Reversion”) Use with extreme caution, once daily maximum: Price deviation from VWAP by more than ~1.5 x ATR(14, 5m) with rejection candles appearing near PDH/PDL. Reverse entry towards the return of VWAP. SL small behind rejection top/bottom. Main target: VWAP. (Don't get greedy — this scenario is for extended periods only.) News Filtering and Risk Management Avoid trading 15–30 minutes before/after strong US news (CPI, NFP, FOMC). Maximum daily loss: 1.5–2% of account balance. Risk per trade: 0.25–0.5% (if you are learning) or 0.5–1% (if you are experienced). Do not exceed two consecutive losing trades per day. Don't chase the market after the opportunity has passed — wait for the next pullback. Smart Deal Management After TP1: Move stop to entry point + trail the rest with EMA20 on 5m or ATR Trailing = ATR(14)×1.0. If the price touches a strong daily level (PDH/PDL) and fails to break, consider taking additional profit. If VWAP starts to flatten and breaks against the trend on H1, stop trading for the day. Quick Checklist (Before Entry) H1 trend is clear and consistent with 200EMA + VWAP. Penetrating the Asia range towards Bias. Clean pull to VWAP/EMA50 on 5m. Confirmation candle and real push. SL is logical (behind swing/ATR×1.5) and R :R ≥ 1:2. No red news coming soon. Example of "ready-made" settings EMA: 20, 50, 200 on 5m, 200 only on H1. VWAP: Daily (reset daily). ATR: 14 on 5m. Levels: PDH/PDL + Asia Band (03:00–09:30 Cairo). Gold Notes Gold is fast and sharp at the open; don't get in early — wait for the draw. Fakeouts are common before news: it is best to call with the trend after the price returns above/below VWAP. Don't expect 80% consistent wins every day — the advantage comes from discipline, filtering out bad days, and only withdrawing when you're on the right track. تعتبر شركة الماسة الألمانية أحد المؤسسات العاملة بالمملكة العربية السعودية ولها تاريخ طويل من الخدمات الكثيرة والمتنوعة التى مازالت تقدمها للكثير من العملاء داخل جميع مدن وأحياء المملكة حيث نقدم أفضل ما لدينا من خلال مجموعة الشركات التالية والتي من خلالها ستتلقي كل ما تحتاج إلية في كل المجال المختلفة فنحن نعمل منذ عام 2015 ولنا سابقات اعمال فى مختلف المجالات الحيوية التى نخدم من خلالها عملائنا ونوفر لهم أرخص الأسعار وبأعلى جودة من الممكن توفرها فى المجالات التالية :- خدمات تنظيف المنازل والفلل والشقق خدمات عزل الخزانات تنظيف غسيل صيانة اصلاح خدمات جلي البلاط والرخام والسيراميك خدمات نقل العفش عمالة فلبينية مدربة خدمات مكافحة الحشرات بجدة كل هذة الخدمات وأكثر نوفرها لكل المتعاقدين بأفضل الطرق مع توفير خطط وبرامج متنوعة لأتمام العمل المسنود إلينا بأفضل وأحدث الطرق الحديثة والعصرية سواء فى شركات النظافة بجدة ومكة المكرمة أو شركات نقل العفش بجدة عمالة فلبينية وباقى الخدمات مثل جلي وتلميع الرخام بمكة وجدة ولا ننسي شركة مكافحة حشرات بجدة التى ساعدت آلاف المواطنين على تنظيف منازلهم من الحشرات بأفضل مبيدات حشرية.
Pine Script® Indikator
von worldforhost
2
Triple Confirmation StrategyTriple Confirmation Strategy (TCS) This indicator combines three different technical tools to provide more reliable entry signals: RSI + Moving Average crossover → momentum confirmation MACD line & signal crossover → trend direction signal OBV + EMA crossover → volume-based confirmation A signal is valid only if all three conditions occur within a given number of bars (default: 5). Optionally, it can be set to trigger only when the third confirmation happens at the current bar. ✨ Features BUY / SELL markers on the chart Alertcondition support → alerts can be set instantly Grouped settings (RSI, MACD, OBV, Logic) Diagnostic overlay (WSCD-style): RSI, MACD, and OBV visualized on a normalized –100…100 scale for easier monitoring 🎯 Usage Suitable for both intraday and swing trading with default settings. Parameters are fully customizable (lookback periods, bar window, diagnostic overlay). Signals should not be used as a standalone trading system but are most effective when combined with broader context and other forms of analysis.
Pine Script® Indikator
von BorondePali
T-Virus Sentiment [hapharmonic]🧬 T-Virus Sentiment: Visualize the Market's DNA Remember the iconic T-Virus vial from the first Resident Evil? That powerful, swirling helix of potential has always fascinated me. It sparked an idea: what if we could visualize the market's underlying health in a similar way? What if we could capture the "genetic code" of market sentiment and contain it within a dynamic, 3D indicator? This project is the result of that idea, brought to life with Pine Script. The indicator's main goal is to measure the strength and direction of market sentiment by analyzing the "genetic code" of price action through a variety of trusted indicators. The result is displayed as a liquid level within a DNA helix, a bubble density representing buying pressure, and a T-Virus mascot that reflects the overall mood. 🧐 Core Concept: How It Works The primary output of the indicator is the "Active %" gauge you see on the right side of the vial. This percentage represents the overall sentiment score, calculated as an average from 7 different technical analysis tools. Each tool is analyzed on every bar and assigned a score from 1 (strong bearish pressure) to 5 (strong bullish potential). In this indicator, we re-imagine market dynamics through the lens of a viral outbreak. A strong bear market is like a virus taking hold, pulling all technical signals down into a state of weakness. Conversely, a powerful bull market is like an antiviral serum ; positive signals rise and spread toward the top of the vial, indicating that the system is being injected with strength. This is not just another line on a chart. It's a comprehensive sentiment dashboard designed to give an immediate, at-a-glance understanding of the confluence between 7 classic technical indicators. The incredible 3D model of the vial itself was inspired by a design concept found here . ⚛️ The 4 Core Elements of T-Virus Sentiment These four elements work in harmony to give a complete, multi-faceted picture of market sentiment. Each component tells a different part of the story. The Virus Mascot: An instant emotional cue. This character provides the quickest possible read on the overall market mood, combining sentiment with volume pressure. The Antiviral Serum Level: The main quantitative output. This is the liquid level in the DNA helix and the percentage gauge on the right, representing the average sentiment score from all 7 indicators. Buy Pressure & Bubble Density: This visualizes volume flow. The density of bubbles represents the intensity of accumulation (buying) versus distribution (selling). It's the "power" behind the move. The Signal Distribution: This shows the confluence (or dispersion) of sentiment. Are all signals bullish and clustered at the top, or are they scattered, indicating a conflicted market? The position of the indicator labels is crucial, as each is assigned to one of five distinct zones: Base Bottom: The market is at its weakest. Signals here suggest strong bearish control and distribution. Lower Zone: The market is still bearish, but signals may be showing early signs of accumulation or bottoming. Neutral Core (Center): A state of balance or sideways consolidation. The market is waiting for a new direction. Upper Zone: Bullish momentum is becoming clear. Signals are strengthening and showing bullish control. Top Cap: The market is "heating up" with strong bullish sentiment, potentially nearing overbought conditions. 🐂🐻 The Virus Mascot: The At-a-Glance Indicator This character acts as a shortcut to confirm market health. It combines the sentiment score with volume, preventing false confidence in a low-volume rally. Its state is determined by a dual-check: the overall "Antiviral Serum Level" and the "Buy Pressure" must both be above 50%. Green & Smiling: The 'all clear' signal. This means that not only is the overall technical sentiment bullish, but it's also being supported by real buying pressure. This is a sign of a healthy bull market. Red & Angry: A warning sign. This appears if either the sentiment is weak, or a bullish sentiment is not being confirmed by buying volume. The latter could indicate a potential "bull trap" or an exhaustive move. This mascot can be disabled from the settings page under "Virus Mascot Styling" if a cleaner look is preferred. 🫧 Bubble Density: Gauging Buy vs. Sell Pressure The bubbles visualize the battle between buyers and sellers. There are two modes to control how this is calculated: Mode 1: Visible Range (The 'Big Picture' View) This default mode is best for getting a broad, contextual understanding of the current session. It dynamically analyzes the volume of every single candlestick currently visible on the screen to calculate the buy/sell pressure ratio. It answers the question: "Over the entire period I'm looking at, who is in control?" As you zoom in or out, the calculation adapts. Mode 2: Custom Lookback (The 'Precision' View) This mode is for traders who need to analyze short-term pressure. You can define a fixed number of recent bars to analyze, which is perfect for scalping or understanding the volume dynamics leading into a key level. It answers the question: "What is happening right now ?" In the example above, a lookback of 2 focuses only on the most recent action, clearly showing intense, immediate selling pressure (few bubbles) and a corresponding drop in the sentiment score to 29%. ℹ️ Interactive Tooltips: Dive Deeper We believe in transparency, not 'black box' indicators. This feature transforms the indicator from a visual aid into an active learning tool. Simply hover the mouse over any indicator label (like EMA, OBV, etc.) to get a detailed tooltip. It will explain the specific data points and thresholds that signal met to be placed in its current zone. This helps build trust in the signals and allows users to fine-tune the indicator settings to better match their own trading style. 🎯 The Scoring Logic Breakdown The "Antiviral Serum Level" gauge is the average score from 7 technical analysis tools. Each is graded on a 5-point scale (1=Strong Bearish to 5=Strong Bullish). Here’s a detailed, transparent look at how each "gene" is evaluated: Relative Strength Index (RSI) Measures momentum and overbought/oversold conditions. Group 1 (Strong Bearish): RSI > 80 (Extreme Overbought) Group 2 (Bearish): 70 < RSI ≤ 80 (Overbought) Group 3 (Neutral): 30 ≤ RSI ≤ 70 Group 4 (Bullish): 20 ≤ RSI < 30 (Oversold) Group 5 (Strong Bullish): RSI < 20 (Extreme Oversold) Exponential Moving Averages (EMA) Evaluates the trend's strength and structure based on the alignment of multiple EMAs (9, 21, 50, 100, 200, 250). Group 1 (Strong Bearish): A perfect bearish sequence (9 < 21 < 50 < ...) Group 2 (Bearish Transition): Early signs of a potential reversal (e.g., 9 > 21 but still below 50) Group 3 (Neutral / Mixed): MAs are intertwined or showing a partial bullish sequence. Group 4 (Bullish): A strong bullish sequence is forming (e.g., 9 > 21 > 50 > 100) Group 5 (Strong Bullish): A perfect bullish sequence (9 > 21 > 50 > 100 > 200 > 250) Moving Average Convergence Divergence (MACD) Analyzes the relationship between two moving averages to gauge momentum. Group 1 (Strong Bearish): MACD & Histogram are negative and momentum is falling. Group 2 (Weakening Bearish): MACD is negative but the histogram is rising or positive. Group 3 (Neutral / Crossover): A crossover event is occurring near the zero line. Group 4 (Bullish): MACD & Histogram are positive. Group 5 (Strong Bullish): MACD & Histogram are positive, rising strongly, and accelerating. Average Directional Index (ADX) Measures trend strength, not direction. The score is based on both ADX value and the dominance of DI+ vs DI-. Group 1 (Bearish / No Trend): ADX < 20 and DI- is dominant. Group 2 (Developing Bearish Trend): 20 ≤ ADX < 25 and DI- is dominant. Group 3 (Neutral / Indecision): Trend is weak or DI+ and DI- are nearly equal. Group 4 (Developing Bullish Trend): 25 ≤ ADX ≤ 40 and DI+ is dominant. Group 5 (Strong Bullish Trend): ADX > 40 and DI+ is dominant. Ichimoku Cloud (IKH) A comprehensive indicator that defines support/resistance, momentum, and trend direction. Group 1 (Strong Bearish): Price is below the Kumo, Tenkan < Kijun, and Chikou is below price. Group 2 (Bearish): Price is inside or below the Kumo, with mixed secondary signals. Group 3 (Neutral / Ranging): Price is inside the Kumo, often with a Tenkan/Kijun cross. Group 4 (Bullish): Price is above the Kumo with strong primary signals. Group 5 (Strong Bullish): All signals are aligned bullishly: price above Kumo, bullish Tenkan/Kijun cross, bullish future Kumo, and Chikou above price. Bollinger Bands (BB) Measures volatility and relative price levels. Group 1 (Strong Bearish): Price is below the lower band. Group 2 (Bearish Territory): Price is between the lower band and the basis line. Group 3 (Neutral): Price is hovering around the basis line. Group 4 (Bullish Territory): Price is between the basis line and the upper band. Group 5 (Strong Bullish): Price is above the upper band. On-Balance Volume (OBV) Uses volume flow to predict price changes. The score is based on OBV's trend and its position relative to its moving average. Group 1 (Strong Bearish): OBV is below its MA and falling. Group 2 (Weakening Bearish): OBV is below its MA but showing signs of rising. Group 3 (Neutral): OBV is very close to its MA. Group 4 (Bullish): OBV is above its MA and rising. Group 5 (Strong Bullish): OBV is above its MA, rising strongly, and showing signs of a volume spike. 🧭 How to Use the T-Virus Sentiment Indicator IMPORTANT: This indicator is a sentiment dashboard , not a direct buy/sell signal generator. Its strength lies in showing confluence and providing a quick, holistic view of the market's technical health. Confirmation Tool: Use the "Active %" gauge to confirm a trade setup from your primary strategy. For example, if you see a bullish chart pattern, a high and rising sentiment score can add confidence to your trade. Momentum & Trend Gauge: A consistently high score (e.g., > 75%) suggests strong, established bullish momentum. A consistently low score (< 25%) suggests strong bearish control. A score hovering around 50% often indicates a ranging or indecisive market. Divergence & Warning System: Pay attention to divergences. If the price is making new highs but the sentiment score is failing to follow or is actively decreasing, it could be an early warning sign that the underlying momentum is weakening. ⚙️ Settings & Customization The indicator is highly customizable to fit any trading style. Position & Anchor: Control where the vial appears on the chart. Styling (Vial, Helix, etc.): Nearly every visual element can be color-customized. Signals: This is where the real power is. All underlying indicator parameters (RSI length, MACD settings, etc.) can be fine-tuned to match a personal strategy. The text labels can also be disabled if the chart feels cluttered. Enjoy visualizing the market's DNA with the T-Virus Sentiment indicator
Pine Script® Indikator
von hapharmonic
18
Volume-Weighted Money Flow [sgbpulse]Overview The VWMF indicator is an advanced technical analysis tool that combines and summarizes five leading momentum and volume indicators (OBV, PVT, A/D, CMF, MFI) into one clear oscillator. The indicator helps to provide a clear picture of market sentiment by measuring the pressure from buyers and sellers. Unlike single indicators, VWMF provides a comprehensive view of market money flow by weighting existing indicators and presenting them in a uniform and understandable format. Indicator Components VWMF combines the following indicators, each normalized to a range of 0 to 100 before being weighted: On-Balance Volume (OBV): A cumulative indicator that measures positive and negative volume flow. Price-Volume Trend (PVT): Similar to OBV, but incorporates relative price change for a more precise measure. Accumulation/Distribution Line (A/D): Used to identify whether an asset is being bought (accumulated) or sold (distributed). Chaikin Money Flow (CMF): Measures the money flow over a period based on the close price's position relative to the candle's range. Money Flow Index (MFI): A momentum oscillator that combines price and volume to measure buying and selling pressure. Understanding the Normalized Oscillators The indicator combines the five different momentum indicators by normalizing each one to a uniform range of 0 to 100 . Why is Normalization Important? Indicators like OBV, PVT, and the A/D Line are cumulative indicators whose values can become very large. To assess their trend, we use a Moving Average as a dynamic reference line . The Moving Average allows us to understand whether the indicator is currently trending up or down relative to its average behavior over time. How Does Normalization Work? Our normalization fully preserves the original trend of each indicator. For Cumulative Indicators (OBV, PVT, A/D): We calculate the difference between the current indicator value and its Moving Average. This difference is then passed to the normalization process. - If the indicator is above its Moving Average, the difference will be positive, and the normalized value will be above 50. - If the indicator is below its Moving Average, the difference will be negative, and the normalized value will be below 50. Handling Extreme Values: To overcome the issue of extreme values in indicators like OBV, PVT, and the A/D Line , the function calculates the highest absolute value over the selected period. This value is used to prevent sharp spikes or drops in a single indicator from compromising the accuracy of the normalization over time. It's a sophisticated method that ensures the oscillators remain relevant and accurate. For Bounded Indicators (CMF, MFI): These indicators already operate within a known range (for example, CMF is between -1 and 1, and MFI is between 0 and 100), so they are normalized directly without an additional reference line. Reference Line Settings: Moving Average Type: Allows the user to choose between a Simple Moving Average (SMA) and an Exponential Moving Average (EMA). Volume Flow MA Length: Allows the user to set the lookback period for the Moving Average, which affects the indicator's sensitivity. The 50 line serves as the new "center line." This ensures that, even after normalization, the determination of whether a specific indicator supports a bullish or bearish trend remains clear. Settings and Visual Tools The indicator offers several customization options to provide a rich analysis experience: VWMF Oscillator (Blue Line): Represents the weighted average of all five indicators. Values above 50 indicate bullish momentum, and values below 50 indicate bearish momentum. Strength Metrics (Bullish/Bearish Strength %): Two metrics that appear on the status line, showing the percentage of indicators supporting the current trend. They range from 0% to 100%, providing a quick view of the strength of the consensus. Dynamic Background Colors: The background color of the chart automatically changes to bullish (a blue shade by default) or bearish (a default brown-gray shade) based on the trend. The transparency of the color shows the consensus strength—the more opaque the background, the more indicators support the trend. Advanced Settings: - Background Color Logic: Allows the user to choose the trigger for the background color: Weighted Value (based on the combined oscillator) or Strength (based on the majority of individual indicators). - Weights: Provides full control over the weight of each of the five indicators in the final oscillator. Using the Data Window TradingView provides a useful Data Window that allows you to see the exact numerical values of each normalized oscillator separately, in addition to the trend strength data. You can use this window to: Get more detailed information on each indicator: Viewing the precise numerical data of each of the five indicators can help in making trading decisions. Calibrate weights: If you want to manually adjust the indicator weights (in the settings menu), you can do so while tracking the impact of each indicator on the weighted oscillator in the Data Window. The indicator's default setting is an equal weight of 20% for each of the five indicators. Alert Conditions The indicator comes with a variety of built-in alerts that can be configured through the TradingView alerts menu: VWMF Cross Above 50: An alert when the VWMF oscillator crosses above the 50 line, indicating a potential bullish momentum shift. VWMF Cross Below 50: An alert when the VWMF oscillator crosses below the 50 line, indicating a potential bearish momentum shift. Bullish Strength: High But Not Absolute Consensus: An alert when the bullish trend strength reaches 60% or more but is less than 100%, indicating a high but not absolute consensus. Bullish Strength at 100%: An alert when all five indicators (MFI, OBV, PVT, A/D, CMF) show bullish strength, indicating a full and absolute consensus. Bearish Strength: High But Not Absolute Consensus: An alert when the bearish trend strength reaches 60% or more but is less than 100%, indicating a high but not absolute consensus. Bearish Strength at 100%: An alert when all five indicators (MFI, OBV, PVT, A/D, CMF) show bearish strength, indicating a full and absolute consensus. Summary The VWMF indicator is a powerful, all-in-one tool for analyzing market momentum, money flow, and sentiment. By combining and normalizing five different indicators into a single oscillator, it offers a holistic and accurate view of the market's underlying trend. Its dynamic visual features and customizable settings, including the ability to adjust indicator weights, provide a flexible experience for both novice and experienced traders. The built-in alerts for momentum shifts and trend consensus make it an effective tool for spotting trading opportunities with confidence. In essence, VWMF distills complex market data into clear, actionable signals. Important Note: Trading Risk This indicator is intended for educational and informational purposes only and does not constitute investment advice or a recommendation for trading in any form whatsoever. Trading in financial markets involves significant risk of capital loss. It is important to remember that past performance is not indicative of future results. All trading decisions are your sole responsibility. Never trade with money you cannot afford to lose.
Pine Script® Indikator
von sgbpulse
Volume Pressure Analysis - Live DataVolume Pressure Gauge and Volume Percentage Indicator – Pine Script Guide This indicator provides a simplified, real-time visualization of both volume pressure (buy vs. sell activity) and today’s trading volume in comparison to historical averages. It is designed to help traders assess whether buyers or sellers dominate the current session and whether today’s volume is significant relative to recent behaviour. ________________________________________ Key Functional Segments 1. Inputs and Configuration Users can configure the length of the Simple Moving Average (SMA) used to calculate average volume, set the position of the gauge table on the chart, and toggle the visibility of the volume pressure display. This allows flexibility in integrating the tool with various trading styles and chart layouts. 2. Volume Data Calculations The indicator calculates three key volume metrics: • volToday: The current day’s volume. • volAvg: The average volume over the user-defined SMA period (default is 20 bars). • volPct: The current volume as a percentage of the average. This enables traders to quickly recognize whether current trading activity is above or below normal, which can be a precursor to potential trend strength or weakness. 3. Volume Pressure Calculation The script estimates buying and selling pressure based on price movement and volume. It distributes volume into upward (buy) and downward (sell) segments and expresses them as percentages of the total volume. This gives an immediate sense of whether bulls or bears are more active in the current session. 4. Visual Representation (Progress Bars) The indicator renders a simplified visual gauge using horizontal bar segments (pseudo-bars) to reflect the proportion of buy and sell pressure. The length of each bar correlates with the strength of pressure from buyers or sellers, helping users assess dominance without analyzing candlestick behavior in depth. 5. Table Display A compact table is drawn on the chart showing: • Buy pressure percentage and corresponding bar. • Sell pressure percentage and corresponding bar. • Volume percentage compared to the recent average. This format makes it easy to evaluate volume dynamics at a glance, without cluttering the price chart or relying on separate overlays. ________________________________________ How Traders Benefit from This Indicator • Momentum Shift Detection: Early signs of trend reversal can be observed when volume pressure flips direction. • Breakout Validation: High volume combined with dominant pressure supports the credibility of breakout moves. • False Move Avoidance: If price moves on low volume or mixed pressure, traders can avoid low-probability entries. • Market Context Awareness: Users can assess whether a day is behaving normally in terms of participation or is unusually quiet or aggressive. ________________________________________ Basic Usage Guide 1. Add the script to your TradingView chart and set your preferred SMA length for volume comparison. 2. Customize the table’s position using the X and Y settings for clarity and alignment. 3. Interpret the outputs: o A higher red bar indicates dominant sell pressure. o A higher green bar indicates dominant buy pressure. o Volume % above 100% suggests above-average activity, while values below 100% may imply low conviction. 4. Apply to trading decisions: o High buy pressure and high volume may indicate a strong long opportunity. o High sell pressure and high volume may support short setups. o Low volume or conflicting signals may call for caution. 5. Combine with other tools such as trend indicators, support/resistance zones, or price action patterns for more reliable trade setups. ________________________________________ Practical Example • Sell Pressure: 70% → Suggests strong seller control; potential for short setups. • Buy Pressure: 30% → Weak buying interest; long trades may carry risk. • Volume Percentage: 120% → Indicates a surge in participation; movement may have greater validity. ________________________________________ Tips for New Traders • Use this indicator as a confirmation tool rather than a standalone strategy. • Begin on higher timeframes (4-hour or daily) to develop familiarity. • Compare multiple examples to identify reliable patterns over time. • Always incorporate proper risk management, including stop losses. ________________________________________ Disclaimer from aiTrendview This indicator is intended solely for educational and informational use. It does not constitute investment advice, trade signals, or financial recommendations. aiTrendview and its affiliates are not liable for any trading losses incurred through use of this tool. All trading involves risk. Past performance of any indicator does not guarantee future results. Users should conduct independent research and consult with a certified financial advisor before making any trading decisions.
Pine Script® Indikator
von aiTrendview-Charting-System
1
Volume Pressure Gauge + Volume %Volume Pressure Gauge and Volume Percentage Indicator – Pine Script Guide This indicator provides a simplified, real-time visualization of both volume pressure (buy vs. sell activity) and today’s trading volume in comparison to historical averages. It is designed to help traders assess whether buyers or sellers dominate the current session and whether today’s volume is significant relative to recent behaviour. ________________________________________ Key Functional Segments 1. Inputs and Configuration Users can configure the length of the Simple Moving Average (SMA) used to calculate average volume, set the position of the gauge table on the chart, and toggle the visibility of the volume pressure display. This allows flexibility in integrating the tool with various trading styles and chart layouts. 2. Volume Data Calculations The indicator calculates three key volume metrics: • volToday: The current day’s volume. • volAvg: The average volume over the user-defined SMA period (default is 20 bars). • volPct: The current volume as a percentage of the average. This enables traders to quickly recognize whether current trading activity is above or below normal, which can be a precursor to potential trend strength or weakness. 3. Volume Pressure Calculation The script estimates buying and selling pressure based on price movement and volume. It distributes volume into upward (buy) and downward (sell) segments and expresses them as percentages of the total volume. This gives an immediate sense of whether bulls or bears are more active in the current session. 4. Visual Representation (Progress Bars) The indicator renders a simplified visual gauge using horizontal bar segments (pseudo-bars) to reflect the proportion of buy and sell pressure. The length of each bar correlates with the strength of pressure from buyers or sellers, helping users assess dominance without analyzing candlestick behavior in depth. 5. Table Display A compact table is drawn on the chart showing: • Buy pressure percentage and corresponding bar. • Sell pressure percentage and corresponding bar. • Volume percentage compared to the recent average. This format makes it easy to evaluate volume dynamics at a glance, without cluttering the price chart or relying on separate overlays. ________________________________________ How Traders Benefit from This Indicator • Momentum Shift Detection: Early signs of trend reversal can be observed when volume pressure flips direction. • Breakout Validation: High volume combined with dominant pressure supports the credibility of breakout moves. • False Move Avoidance: If price moves on low volume or mixed pressure, traders can avoid low-probability entries. • Market Context Awareness: Users can assess whether a day is behaving normally in terms of participation or is unusually quiet or aggressive. ________________________________________ Basic Usage Guide 1. Add the script to your TradingView chart and set your preferred SMA length for volume comparison. 2. Customize the table’s position using the X and Y settings for clarity and alignment. 3. Interpret the outputs: o A higher red bar indicates dominant sell pressure. o A higher green bar indicates dominant buy pressure. o Volume % above 100% suggests above-average activity, while values below 100% may imply low conviction. 4. Apply to trading decisions: o High buy pressure and high volume may indicate a strong long opportunity. o High sell pressure and high volume may support short setups. o Low volume or conflicting signals may call for caution. 5. Combine with other tools such as trend indicators, support/resistance zones, or price action patterns for more reliable trade setups. ________________________________________ Practical Example • Sell Pressure: 70% → Suggests strong seller control; potential for short setups. • Buy Pressure: 30% → Weak buying interest; long trades may carry risk. • Volume Percentage: 120% → Indicates a surge in participation; movement may have greater validity. ________________________________________ Tips for New Traders • Use this indicator as a confirmation tool rather than a standalone strategy. • Begin on higher timeframes (4-hour or daily) to develop familiarity. • Compare multiple examples to identify reliable patterns over time. • Always incorporate proper risk management, including stop losses. ________________________________________ Disclaimer from aiTrendview This indicator is intended solely for educational and informational use. It does not constitute investment advice, trade signals, or financial recommendations. aiTrendview and its affiliates are not liable for any trading losses incurred through use of this tool. All trading involves risk. Past performance of any indicator does not guarantee future results. Users should conduct independent research and consult with a certified financial advisor before making any trading decisions.
Pine Script® Indikator
von aiTrendview-Charting-System
3
Intraday vs Overnight OBV🔍 Purpose This indicator provides a volume-weighted cumulative flow model that mimics On-Balance Volume (OBV) logic but splits the volume impact into intraday vs. overnight sessions. It allows traders to track how volume contributes to price movement in each session and identify whether buying/selling pressure is stronger during or outside of regular trading hours. This indicator attempts to alleviate some of the downfalls of the standard OBV indicator, which only looks at total volume and total direction. The price of stocks generally behaves extremely differently during market hours and outside market hours, and many of the large moves happen outside of regular market hours on low volume. ⚙️ Core Features 1) OBV-style calculation: If price increases → volume is added to the OBV stream. If price decreases → volume is subtracted. If price is flat → OBV remains unchanged. 2) Session splitting: Intraday session: movement from today's open to close. Overnight session: movement from yesterday’s close to today’s open. Volume is split proportionally between these two periods based on user input. 3) Four visualization modes: "Intraday" — plots only OBV from intraday price movement. "Overnight" — plots only OBV from overnight price movement. "Aggregate" — plots the sum of intraday and overnight OBV for a holistic view. "Both Intraday and Overnight" — plots intraday and overnight OBV separately on the same chart. 📐 Inputs 1) Synthetic OBV Type: "Intraday" — Show OBV from open to close only. "Overnight" — Show OBV from prior close to today's open only. "Aggregate" — Show a single line combining both. "Both Intraday and Overnight" — Show both lines on the same chart. 2) Estimated Overnight Volume %: Percentage of total daily volume assumed to occur during extended hours. The rest is allocated to regular session (intraday). Default: 20% overnight, 80% intraday. 🧮 How It Works Volume Splitting: Total bar volume is split into overnight Volume and intraday Volume: Intraday change is the difference between today’s close and open. Overnight change is the difference between today’s open and yesterday’s close. Session OBV Calculations: OBV is incremented/decremented by the session's allocated volume, depending on whether the session’s price change was positive or negative. Aggregate OBV: Combines both session deltas for a holistic volume flow view. 📊 Interpretation Rising OBV (any stream) suggests accumulation; falling OBV suggests distribution. Divergences between price and OBV lines (especially overnight vs. intraday) can reveal where hidden buying/selling is occurring. Comparing intraday vs overnight OBV can help: Spot whether institutional demand is building off-hours. Detect retail vs. institutional behavior (retail trades often dominate intraday; institutional may prefer after-hours). 💡 Use Cases Identify whether overnight gaps are supported by overnight volume momentum. Detect accumulation in low-volume overnight sessions. Compare intraday and overnight strength during earnings season or news events. Complement traditional OBV by seeing session-based breakdowns.
Pine Script® Indikator
von TheUltimator5
OBV Strength Relative to Volume (Lakhs View)OBV Strength Relative to Volume (Lakhs View) Description: to provide a compact yet powerful insight into volume momentum and price conviction. It's tailored for traders and analysts in markets like India, where high-volume stocks are often better interpreted in lakhs. 💡 Key Features: OBV Calculation: Cumulative OBV is computed based on price movement direction and volume contribution. OBV Strength (%): Measures the percentage strength of OBV relative to total volume over a user-defined period. It reflects how strongly volume is contributing to price movements. Lakhs View: Both OBV and Volume are scaled to lakhs for cleaner readability and practical analysis in high-volume securities. Historical Table Display: Displays date-wise OBV, Volume, and OBV Strength for the last N candles (customizable). Automatically updates every 5 bars or on each bar for real-time analysis. Color-coded cells for quick visual recognition. ⚙️ Inputs: OBV Strength Period: Number of bars used to calculate OBV strength (default = 5). Number of Days in Table: Number of recent bars shown in the on-chart table (default = 5). 📈 Plots: OBV (Lakhs) – Aqua line. Volume (Lakhs) – Orange columns. OBV Strength (%) – Green line indicating momentum strength based on volume. 📍 Ideal Use: Use this indicator to: Spot divergences between OBV and price. Assess the strength of volume behind a trend. Track consistency and spikes in volume-backed price moves. Quickly scan recent trends with a clear numerical and visual table.
Pine Script® Indikator
von raghavprakash05
OBV with MA & Bollinger Bands by Marius1032OBV with MA & Bollinger Bands by Marius1032 This script adds customizable moving averages and Bollinger Bands to the classic OBV (On Balance Volume) indicator. It helps identify volume-driven momentum and trend strength. Features: OBV-based trend tracking Optional smoothing: SMA, EMA, RMA, WMA, VWMA Optional Bollinger Bands with SMA Potential Combinations and Trading Strategies: Breakouts: Look for price breakouts from the Bollinger Bands, and confirm with a rising OBV for an uptrend or falling OBV for a downtrend. Trend Reversals: When the price touches a Bollinger Band, examine the OBV for divergence. A bullish divergence (price lower low, OBV higher low) near the lower band could signal a reversal. Volume Confirmation: Use OBV to confirm the strength of the trend indicated by Bollinger Bands. For example, if the BBs indicate an uptrend and OBV is also rising, it reinforces the bullish signal. 1. On-Balance Volume (OBV): Purpose: OBV is a momentum indicator that uses volume flow to predict price movements. Calculation: Volume is added on up days and subtracted on down days. Interpretation: Rising OBV suggests potential upward price movement. Falling OBV suggests potential lower prices. Divergence: Divergence between OBV and price can signal potential trend reversals. 2. Moving Average (MA): Purpose: Moving Averages smooth price fluctuations and help identify trends. Combination with OBV: Pairing OBV with MAs helps confirm trends and identify potential reversals. A crossover of the OBV line and its MA can signal a trend reversal or continuation. 3. Bollinger Bands (BB): Purpose: BBs measure market volatility and help identify potential breakouts and trend reversals. Structure: They consist of a moving average (typically 20-period) and two standard deviation bands. Combination with OBV: Combining BBs with OBV allows for a multifaceted approach to market analysis. For example, a stock hitting the lower BB with a rising OBV could indicate accumulation and a potential upward reversal. Created by: Marius1032
Pine Script® Indikator
von Marius1032