MTF Vitals Decision DashboardMTF Vitals Decision Dashboard is a multi-timeframe “vitals monitor” for the market.
Instead of guessing off one candle or one timeframe, it checks the core vitals—trend, strength, and direction—across 5 timeframes so you diagnose conditions correctly before you act.
🩺 The Vitals Concept
Think of price like a patient:
RSI = temperature (overheated / too cold / stable)
ADX = strength / urgency (is the move strong enough to matter?)
DI Net = directional pulse (bulls vs bears—who actually has control?)
Trend ribbon = posture / gait (is the market walking forward or limping sideways?)
Dir Score = diagnosis score (how many vitals agree?)
This dashboard is designed to help you avoid the most common trading mistake:
treating noisy, mixed signals like a clean trend.
What You Get (Features + Why They Matter)
1) 5-Timeframe Vitals Panel (TF1–TF5)
Defaults: 5 / 15 / 60 / 240 / D, fully editable.
Each timeframe column reports the same vitals so you can instantly see:
Alignment (multiple TFs “agree on the diagnosis”)
Conflict (mixed readings = higher risk)
Transition zones (near-flip conditions where traders get chopped)
Rows Included:
RSI (color-coded)
Green / red bias based on above/below 50
Orange highlights extremes (>70 / <30) so you know when the “patient is overheated/frozen”
ADX (strength / regime)
Two thresholds:
Anchor TF (TF5): ADX Driver
Other TFs: ADX Support
Helps you avoid acting on “weak trend” conditions that look exciting but don’t have force behind them
DI Net (directional pulse)
Shows who’s winning: DI+ vs DI−
Highlights your tight-zone threshold (near flip / indecision zone)
Dir Score (0–4)
A simple “diagnosis score” based on:
Direction agreement (trend vs DI)
RSI confirmation (above/below 50)
ADX above threshold
DI Net outside the tight-zone
Higher score = cleaner multi-factor agreement
Δ / Notes row
Includes deltas for context:
ADX2Δ, RSI2Δ, DI2Δ
Bottom-right Notes cell = TF5 Anchor MA state
“Above / Below / At MA” (default EMA length = 50)
This helps confirm if the anchor timeframe supports the current bias or conflicts with it
2) Trend Ribbon (Chart TF) — “Walk Test”
A thick band that acts like your immediate “go/no-go environment” read:
Uses HMA short vs HMA long for trend direction
Confirms with DMI alignment
Turns neutral (gray) when the diagnosis is unreliable:
DI is tight (near flip)
ADX is weak
HMA trend and DI direction disagree
Purpose: help you avoid forcing trades when the market is technically “alive” but not directionally healthy.
3) Optional Markers (Low Noise, High Meaning)
Toggle each on/off depending on your style.
RSI “R” Release markers (pressure normalization)
RSI was extreme 2 bars ago and has now returned inside normal range
Useful for identifying “pressure release” transitions without adding signal spam.
Bollinger “B” Re-entry markers (reversion context)
Price re-enters the Bollinger Band range from outside
Helpful when you want to see mean-reversion context while still respecting trend/strength.
DI Cross Diamonds (filtered)
Marks DI crossovers only when separation clears your tight-zone threshold
This reduces “false alarms” that happen when DI lines cross inside chop.
How to Use (Doctor Workflow)
Start with the Anchor (TF5):
If TF5 ADX is weak or DI Net is tight, treat conditions like a low-confidence diagnosis.
Look for stacking:
When multiple timeframes show higher Dir Scores with matching DI Net direction, conviction rises.
Check the ribbon:
Neutral ribbon = market is in a “non-diagnostic” state → be selective.
Directional ribbon + alignment = conditions are cleaner.
Use Notes (MA state):
TF5 Above/Below MA gives you one more anchor confirmation check.
Inputs You Control
TF1–TF5 timeframes
ADX thresholds:
ADX Driver (TF5)
ADX Support (TF1–TF4)
DI Net Tight-Zone (±) threshold
MA length for TF5 Notes cell
Display toggles: Ribbon / Markers / Diamonds / Table position + compact mode
Performance limiter: restrict drawing to recent history if needed
Performance & Design Intent
This script is built for clarity over clutter:
One consistent dashboard view
Optional visuals that can be disabled
A history limiter to reduce chart load if desired
Notes
This indicator is a decision support dashboard, not a predictive system.
It helps you interpret conditions across timeframes so you can avoid acting on incomplete or conflicting “vitals.”
Personal trading use only. Not investment advice.
Multitimeframe
OSVS Advanced CRT Scanner + FVG & Filter📌 Script Name
OSVS Advanced CRT Scanner + FVG & Trend Filter
📖 Description
OSVS Advanced CRT Scanner is an advanced CRT (Candle Range Theory) scanner based on ICT / Smart Money concepts, designed for multi-timeframe and multi-symbol market scanning.
The script combines multiple filters such as:
Liquidity sweeps
Fair Value Gap (FVG) interactions
Trend filter (EMA)
Risk / Reward (R:R) validation
Signal maturity (candle completion)
to identify high-quality long and short trading opportunities.
It provides both visual trade setups (Entry / SL / TP) on the chart and a dashboard for monitoring multiple markets simultaneously.
🚀 Key Features
🔎 Multi-Symbol Scanner
Scan up to 7 different symbols simultaneously
Supports cryptocurrencies, dominance indices, and futures contracts
⏱ Multi-Timeframe Analysis
Weekly (1W)
Daily (1D)
4H
1H
Each timeframe runs through an independent CRT + filtering process.
🧠 Smart Filters
✅ CRT Sweep Logic
✅ Outside Bar (Range Fill) filter
✅ Fair Value Gap (FVG) interaction confirmation
✅ Trend direction filter (EMA)
✅ Minimum Reward / Risk ratio
✅ Candle maturity (% completion) filter
📊 Trend Filter
User-defined EMA length
User-defined trend timeframe
Counter-trend signals can be optionally filtered out
🎯 Trade Setup Visualization
Automatically plotted on the chart:
Entry
Stop Loss
Take Profit (2R)
If price touches TP or SL before entering the trade, the setup is automatically invalidated (stale filter).
🟡 FVG Quality (+) Tag
A “+” quality tag is added if the signal interacts with an active Fair Value Gap (FVG)
Displayed visually on both the chart and the dashboard
📋 Dashboard (Scanning Panel)
All symbols displayed on a single screen
Color-coded based on trend direction
Long / Short / Quality status:
L / S
L+ / S+
– (no signal)
⚙️ Input Settings
🔹 Symbols
Up to 7 symbols
🔹 Visual Settings
CRT levels
Trend EMA
Trade setup drawings
FVG quality tag
🔹 Trend Filter
Enable / disable trend filter
EMA length
Trend timeframe
🔹 Risk Management
Minimum Reward / Risk ratio
🔹 Signal Timing
Candle completion percentage (% maturity)
🔹 Advanced Filters
Outside bar filter
FVG lookback bar count
🔹 Dashboard
Size (Tiny / Small / Normal)
Position (Top / Bottom)
🔔 Alert System
Triggered when an active CRT setup appears on any symbol
JSON-compatible alert message:
CRT STATUS: Setup Detected!
Compatible with bots and webhook systems.
⚠️ Disclaimer
This script is not financial advice.
It is intended for educational and analytical purposes only.
Trading financial markets involves risk.
All trading decisions are the sole responsibility of the user.
🧩 Usage Recommendation
For best performance, use with an HTF → LTF top-down approach
Signals become more selective when the trend filter is enabled
FVG (+) tagged setups are considered higher probability
-----------------------------------------------------------------------------------------------------------
G-552 STRATEGY | R-90 BARBAROS⚓ G-552 | R-90 BARBAROS PRO: MTF Data Analysis Terminal (English)
This indicator is a professional Data Monitoring Terminal designed to filter out market noise and create a strategic operation plan. It features specialized optimization for BTC, XRP, and ETHFI.
🚀 Key Features:
Dynamic Operation Protocols: Quickly switch between optimized settings for specific assets with a single click.
Multi-Timeframe (MTF) Radar: Monitors 1m, 3m, 5m, 15m, and 30m intervals simultaneously. Track the status of each "Fleet" (timeframe) on the top-right dashboard.
Central Decision Engine: Signals are generated based on a consensus across multiple timeframes, significantly reducing false signals.
Live Operation Log: Follow real-time system analysis in a military-style report format on the bottom-right panel.
⚠️ NOT / DISCLAIMER: Yatırımlarınız kendi sorumluluğunuzdadır. Bu araç bir yatırım tavsiyesi değil, teknik bir veri izleme ve analiz stratejisidir.
VPG Multi TF Framework Analysis📊 VPG – Multi TF Framework Analysis
VPG – Multi TF Framework Analysis is a multi-timeframe market status dashboard designed to help traders quickly understand price direction, swing conditions, and candle timing across several timeframes in one compact table.
This indicator works on any symbol and is especially useful for scalpers, day traders, and swing traders who need a fast overview of market structure.
🚀 Key Features
🔹 Multi-Timeframe Price Status (1m, 5m, 15m, 30m, 1H, 4H, D, W)
Each timeframe is classified in real-time as:
RALLY → current price above previous candle close
BASE → current price equal to previous close (with tolerance option)
DROP → current price below previous candle close
Color-coded for quick visual recognition.
🔹 Swing Detection (Peak / Valley / Up / Down)
A dedicated Swing row shows market structure per timeframe using:
PEAK → local high (based on last 2 closed candles + current price)
VALLEY → local low
UP → trending upward when no swing detected
DOWN → trending downward when no swing detected
This avoids empty “-” states and always provides meaningful structure information.
Swing row can be turned ON/OFF from settings.
🔹 Previous Close Row (Optional)
Displays the previous candle close price for each timeframe.
Can be enabled or disabled from settings.
🔹 Countdown Timer to Candle Close
Shows remaining time until each timeframe candle closes:
Normal color when time is sufficient
Orange background when ≤ 10 minutes remaining
Red background when ≤ 5 minutes remaining
Helps traders prepare for candle close decisions.
Timer row can be enabled or disabled from settings.
🔹 Trend Strength Badge
A floating badge summarizes overall trend strength based on multi-timeframe alignment:
WEAK / MODERATE / STRONG / VERY STRONG
RALLY or DROP
MIXED state when conditions are unclear
Includes optional blinking bullet for non-mixed trends.
Position of the badge can be configured (top/center/bottom & left/center/right).
🔹 Alert System
Two types of alerts:
Structure alerts
Trigger when a timeframe changes into RALLY or DROP (or any state change)
Timer alerts
Trigger when remaining time drops below a chosen minute threshold
Includes a Test Alert button to verify alert functionality.
🔹 Full UI Customization
Table position: top / center / bottom & left / center / right
Font size: tiny / small / normal / large
Background opacity (0–100)
Toggle rows individually (PrevClose, Swing, Timer)
Trend badge position & blink speed
🎯 Who This Indicator Is For
Scalpers monitoring lower timeframes (1m–15m)
Day traders aligning 15m–4H structure
Swing traders watching Daily & Weekly bias
Anyone who wants a clean multi-TF dashboard without cluttering the chart
⚠ Notes
Works on any market (Forex, Gold, Crypto, Indices, Stocks).
Daily timer uses New York close (17:00 NY time).
Uses request.security() for accurate multi-timeframe data.
📌 Summary
This dashboard combines:
✅ Price direction
✅ Market structure (swing)
✅ Time-to-close
✅ Trend strength
✅ Alerts
✅ Full visual customization
into one lightweight and practical trading tool.
Meer SMC Pro [Smart Structure, Probability Zones & Mitigation]Meer SMC Pro is an all-in-one institutional trading suite designed to filter out noise and visualize high-probability Smart Money Concepts (SMC) setups. Unlike standard indicators that clutter the chart with infinite lines, this script uses a Predictive Scoring Engine to rate zones, validate market structure, and automatically identify "King of the Hill" volume levels.
It is specifically optimized for Gold (XAUUSD) and volatile pairs but works on all assets.
🛠️ Key Features & Logic Breakdown
1. 💎 Smart Zone Consolidation (Predictive "Jackpot" Logic)
Instead of showing individual, weak Order Blocks, the script uses an algorithm to merge overlapping zones within a specific ATR range. It then scores these zones based on Confluence:
⚖️ Normal: A standard valid Order Block.
🔥 STRONG: Valid Zone + High Volume (1.5x Average).
💎 JACKPOT: The highest probability zone. It combines High Volume + FVG + Structural Liquidity Sweep.
Logic: Helps traders identify which level to place a limit order on versus which level to wait for confirmation.
2. 📉 Advanced Market Structure (Real vs. Fake BOS)
The script maps ZigZag Highs/Lows (HH, HL, LH, LL) and identifies Break of Structure (BOS) with a built-in Validity Filter:
✅ Real BOS (Dashed Line): Validated by Displacement (Body close), Momentum, and Volume.
⚠️ Fake BOS (Dotted Line): Weak breaks that lack volume or displacement, often signaling a trap.
Visuals: Labels are placed centrally on the structure lines for clarity.
3. 🛡️ Mitigation & Breaker Blocks (Auto 50% EQ)
When an Order Block fails (gets violated), it flips its role:
Breaker Block: Formed when price sweeps liquidity before breaking the zone.
Mitigation Block: Formed on a failure swing (no sweep) before breaking.
✨ Auto-Equilibrium: The script automatically draws a White Dotted Line at the 50% Center of these blocks.
Logic: Institutions often mitigate their positions exactly at the 50% equilibrium of a failed block.
4. ⚡ Extreme Order Block ("King of the Hill")
To avoid analysis paralysis, this feature tracks only the Single Highest Volume Candle in the current trend leg.
Logic: It constantly compares volume. If a new candle beats the previous record, the "Extreme OB" box updates. This highlights the area of maximum institutional interest.
5. 🧹 Touch & Go System (Chart Cleanup)
Keeps the chart professional and clean.
Logic: Zones and lines do not extend infinitely. They extend for a fixed number of bars (e.g., 40). If price touches/mitigates a zone, or if the zone becomes invalid, the script automatically deletes the box and lines to prevent clutter.
6. 🎯 Liquidity Targets
BSL (Buy-Side Liquidity): Unmitigated Swing Highs.
SSL (Sell-Side Liquidity): Unmitigated Swing Lows.
These act as magnets for price before a reversal.
⚙️ How to Trade with Meer SMC Pro
Trend Identification: Follow the HH/HL (Bullish) or LH/LL (Bearish) labels. Wait for a Real BOS (Dashed Line) to confirm direction.
Entry Strategy:
Aggressive: Place limit orders at 💎 JACKPOT zones.
Conservative: Wait for price to tap a ⚖️ Normal zone and print a lower timeframe Choch.
Recovery: If a zone fails, look for a retest of the Mitigation Block's 50% Dotted Line.
Stop Loss: Place SL below the "Extreme OB" or the consolidated zone low.
🔧 Settings Guide
Smart Zone Consolidation: Keep ON for cleaner charts.
ATR Multiplier:
Use 0.5 for Volatile assets (Gold, Crypto, Indices).
Use 1.0 for Stable Forex pairs (EURUSD).
Structure Lookback: Default is 10. Increase to 20 for higher timeframe Swing Trading.
Disclaimer: This tool is for educational analysis of market structure. Past performance does not guarantee future results. Always manage your risk.
UTC+7 Time Highlight// // Input
// session1 = input.session("0600-0601", "Time Slot 1 (UTC+7)")
// session2 = input.session("0800-0801", "Time Slot 2 (UTC+7)")
Multi Confluence Trading System by MKRPShort Description
A highly configurable multi-indicator confluence system that combines momentum, trend, volatility, and price-structure signals into clear Buy/Sell indications.
________________________________________
📖 Full Description
MKRP – Multi-Confluence Indicator is designed for traders who prefer confirmation-based trading instead of relying on a single indicator.
This script brings together multiple popular technical indicators and allows users to enable, disable, and combine them dynamically to generate high-confidence Buy and Sell signals.
Rather than enforcing one rigid strategy, MKRP lets the trader choose the trading style that best fits their market and timeframe.
________________________________________
🔀 Available Strategy Modes
🔹 Individual or Combined
Uses a confluence scoring system.
Each enabled indicator contributes one confirmation.
A Buy or Sell signal is generated when the required number of confirmations is met.
🔹 SMM
A momentum-based approach using:
• Stochastic direction
• RSI slope
• MACD slope
• EMA alignment
Best suited for trend continuation entries.
🔹 SMM + Swing
Designed for pullbacks and swing entries, combining:
• Momentum indicators
• Bollinger Band interaction
• RSI level shifts
🔹 SMM + Momentum
Focused on strong breakouts, requiring:
• Momentum expansion
• Volatility expansion
• Trend strength via ADX
🔹 EMA Crossovers
A pure EMA cluster crossover system, where multiple EMA pairs can be selected and confirmed within recent candles.
________________________________________
🧠 Indicators Used
Depending on user selection, the script may use:
• RSI (30/70 logic)
• MACD crossover
• Stochastic momentum
• ADX with +DI / −DI
• Parabolic SAR
• Bollinger Bands
• Fibonacci retracement zones
• Pivot levels
• Support & Resistance
• EMA crossovers (5 to 100)
Each indicator can be independently enabled or disabled.
________________________________________
🎯 Signal Logic Philosophy
• Signals are generated only after bar close
• No repainting of historical signals
• Designed to filter noise using confluence
• Works on any timeframe and instrument, based on user tuning
________________________________________
🛑 Stop-Loss Visualization
The indicator automatically plots reference stop-loss levels based on Bollinger Band structure and recent price movement.
These stop-loss levels are visual guides only and should be adjusted according to the trader’s own risk management rules.
________________________________________
⚠️ Important Notes for Users
• Divergence detection is basic and candle-comparison based, intended as a supporting confirmation, not a standalone divergence system.
• Pip / price movement calculations are generic and meant for visual guidance, not instrument-specific precision.
• This is an indicator, not an automated strategy.
• Always confirm signals with:
o Higher-timeframe trend
o Market structure
o Proper position sizing
________________________________________
📊 Best Suited For
• Intraday trading
• Swing trading
• Trend continuation setups
• Momentum breakouts
• EMA-based trend confirmation
________________________________________
⚖️ Disclaimer
This indicator is provided for educational and analytical purposes only.
It does not guarantee profits and should not be used as the sole basis for trading decisions.
3 EMA with AlertsThis indicator plots three key EMAs (20, 50, and 200) directly on the chart, making it easy to track short-, medium-, and long-term trends. A color-coded table is displayed in the top-right corner for quick reference.
-> YOU CAN CHANGE EMA VALUE ACCORDING YOUR TRADING STYLE.
The script also includes smart alerts that trigger only when the state changes:
• FAST EMA crossing above MEDIUM AND SLOW EMA → Bullish signal
• FAST EMA crossing below MEDIUM AND SLOW EMA → Bearish signal
This tool is designed for traders who want clean visuals, reliable alerts, and simplified trend recognition.
Axiom Engine [v10] Axiom Engine
is an institutional-style trading framework designed to filter market conditions and standardize execution quality across FX, metals, indices, and crypto.
Core logic (high level)
HTF alignment using EMA structure (trend authority)
Market regime filter using ADX (trend vs range conditions)
Momentum validation via RSI + divergence logic
Volatility awareness using ATR for adaptive thresholds
Execution locks (structure → trigger → confirmation) to avoid late or low-quality entries
Trade validity / expiry system to prevent stale setups
Visual tools
Clear on-chart bias + quality grading
Optional projected levels (multi-timeframe style)
Optional context/structure visuals (clean, minimal clutter)
🧪 Early Access — Feedback Welcome
This is a new indicator, and I’m currently collecting feedback before releasing the premium version.
If you test Axiom Engine, feel free to share your thoughts on clarity, performance, and improvements.
📩 Contact
Feedback & inquiries: AxiomEnginePro@gmail.com
Advanced SMC Market Structure with Triple HTF FVGs & Term PivotsFull-featured Smart Money Concepts indicator including:
Major / Minor Break of Structure (BOS) and Change of Character (CHOCH)
Current TF Fair Value Gaps with 50% level option
Three independent higher-timeframe FVGs (user-selectable: 15m–1M)
Per-timeframe extension length control
HTF FVG source timeframe displayed directly on boxes
Short-term (ST) and Intermediate-term (IT) pivot labeling
Optimized object handling to stay within TradingView limits
Perfect for traders following institutional order flow, liquidity grabs, and multi-timeframe confirmation
[LJ] RSIM + ICT KillzonesIndicator Summary
This Pine Script indicator is a comprehensive, all-in-one toolkit designed for traders utilizing Inner Circle Trader (ICT) concepts. It visually maps out crucial time-based trading sessions, killzones, and key opening price levels directly on the chart. Alongside the time and price tools, it features a real-time "RSIM" (MTF RSI Monitor) dashboard to track market momentum across multiple timeframes, all while maintaining a lag-free chart through automated drawing cleanup.
Core Functionalities
ICT Killzones & Silver Bullets:
Visually demarcates specific high-probability trading windows—including the Asian, London, and New York (AM & PM) killzones, as well as the UK and US "Silver Bullet" times—using vertical lines and colored background highlights.
Key Opening Price Levels:
Automatically plots horizontal lines for significant opening prices, such as the New York Midnight Open (often used as true day open), CME Open, and NY AM/PM Opens. It also includes Higher Time Frame (HTF) levels for Weekly and Monthly opens.
Session High/Low Tracking:
Actively tracks and draws horizontal price levels for the High and Low of the current day, previous day, and individual Globex, Asian, London, and NY sessions.
Multi-Timeframe RSI Dashboard (RSIM):
An on-chart table that displays the current Relative Strength Index (RSI) values and a live countdown timer ("time to close") for the 5-minute, 15-minute, 1-hour, 4-hour, Daily, and Weekly timeframes.
Lunch "No-Trade-Zone":
Specifically highlights the New York Lunch period, visually warning traders of potential low-volume or erratic price action.
Automated Housekeeping:
A built-in memory management system that automatically deletes drawings (lines and labels) older than a user-defined number of days to prevent chart clutter and performance lag.
Built-in Debug Logger:
An optional on-chart logging table that tracks session triggers and script events, helping traders verify that times and levels are plotting correctly for their selected asset.
HOANO All inOne BS Link indicator : t.me
=====================================
HOANO All inOne BS: is a special, custom-designed indicator. It is a private (invite-only) indicator, created specifically for analysis and testing purposes.
This indicator is not intended for public use and requires the author’s permission before being applied to any chart. There are no guarantees or assurances of profit. The indicator is provided “as is” and is for educational and reference purposes only.
If you wish to be granted access, please contact the author directly.
MTF CPRThe Central Pivot Range (CPR) is a technical indicator used to identify key price levels, trend direction, and market volatility.
This script provides a comprehensive MTF CPR engine that tracks Daily, Weekly, and Monthly levels simultaneously. It identifies "Fair Value" through the Central Pivot Range, allowing traders to maintain a clear structural bias across multiple timeframes without switching charts.
Unlike fixed-ratio pivots, these Standard Deviations are projected based on the internal width of each specific CPR. This dynamic calculation ensures that volatility targets (SD levels) are relative to the market's current compression or expansion, providing more accurate exhaustion points.
The indicator offers total control over every timeframe independently. Users can customize the number of SD levels, the specific step-multiplier for each timeframe, and all visual properties including line width, color, and style to ensure maximum chart clarity.
Use it with VWAP for additional confluence.
Cumulative Moving Average (Anchored)Title:
Cumulative Moving Average (Anchored) – Timeframe & Source Flexible Trend Analysis
Description:
The Cumulative Moving Average (Anchored) provides an anchored view of price averages, accumulating values from a user-defined start time. This approach emphasizes long-term trend context while allowing flexible timeframe and price source selection, helping traders identify the cumulative effect of price action over a specified period.
Key Features:
• Anchored Averages: Starts accumulation from a custom date/time to analyze long-term price trends.
• Multi-Source Support: Choose from Close, Open, High, Low, HL2, HLC3, OHLC4, or High & Low for versatile analysis.
• Higher-Timeframe Support: Optionally calculate averages using a higher timeframe while plotting on the current chart.
• Separate High/Low Averages: When using "High & Low" mode, displays cumulative high and low averages to visualize the price range evolution.
• Lightweight & Transparent: Simple cumulative logic keeps charts clear and responsive.
Inputs & Settings:
• Calculation Timeframe (default = chart timeframe)
• Start Date / Time for anchored averaging
• Source selection for price calculation (Close/Open/High/Low/HL2/HLC3/OHLC4/High & Low)
Usage:
This indicator helps traders:
• Observe long-term trend behavior anchored from a specific date
• Compare cumulative high and low trends against price action
• Confirm trend direction over custom periods for strategy alignment
• Integrate anchored averages into multi-timeframe analysis
Technical Notes:
• Start time defines the beginning of cumulative calculation; resetting requires adjusting the date/time input. (click 3 dots next to indicator, select re-set points)
• Works best on standard OHLC charts; non-standard chart types may yield inconsistent results.
• Past trends do not guarantee future performance; always apply proper risk management.
cephxs + fadi / Previous Time Based Dealing RangesPREVIOUS TIME BASED DEALING RANGES
Visualize previous and current higher timeframe dealing ranges with dual-box OHLC representation, extending reference lines, and HTF candle displays.
Open Source Fork of @fadizeidan 's HTF Candles Indicator
OVERVIEW
This indicator displays time-based dealing ranges from higher timeframes directly on your chart. It shows the complete price action structure of previous (or current/forming) periods using a dual-box system: one box for the full High-Low range and another for the Open-Close body. Reference lines extend from key levels to help identify potential support, resistance, and mean reversion zones.
Perfect for traders who use ICT concepts, market structure analysis, or any methodology that relies on understanding where price has been relative to previous dealing ranges.
KEY FEATURES
Dual-Box Range Visualization: Each range displays two boxes - the full H-L range (outer) and the O-C body (inner) - giving immediate visual context of candle structure
Multiple Timeframes: Support for 90m, 4H, 6H, 1D, 1W, 1M, and 3M ranges
Previous/Current Mode: View completed ranges (Previous) or the forming range (Current) with real-time updates
Auto Mode: Automatically selects the appropriate range based on your chart timeframe
Reference Lines: Extending lines from High, Mid, Low (or Quadrants: H/75/M/25/L) with trade-into detection
HTF Candle Display: Visual HTF candles positioned to the right of price for context
6H Session Support: Session-aware ranges for Asia, London, NY AM, and NY PM with labeled names
Open Line: Vertical line marking the range's opening price/time
Imbalance Detection: Fair Value Gaps and Volume Imbalances highlighted on HTF candles
MODE OPTIONS
Previous/Current: Previous shows the last completed range. Current shows the forming range with dynamic H/L/C updates
Auto/Manual: Auto selects range by chart TF. Manual lets you choose specific ranges
Extend Box (Current): In Current mode, extends the box's right edge as price develops
AUTO MODE TIMEFRAME LOGIC
Auto mode now selects up to 3 ranges automatically based on chart timeframe, providing multi-timeframe context:
Chart ≤ 3m → 90m + 6H + 1D
Chart 4m-14m → 6H + 1D + 1W
Chart 15m-59m → 1D + 1W (+ 1M available)
Chart 1H-3H → 1D + 1W + 1M
Chart 4H-23H → 1W + 1M + 3M
Chart ≥ 1D → 1M + 3M
INPUTS
Mode
Mode: Previous/Current - Choose completed or forming range
Auto/Manual: Auto selects range by chart TF, Manual lets you choose
Extend Box (Current): Extends box right edge with price (Current mode only)
Show Range Boxes: Toggle box visibility (lines remain visible when off)
Filter Lines by Distance: When boxes are hidden, hide reference lines that are too far from current price (Really Close / Balanced / Slightly Far)
Previous Ranges
Range 1: Enable/disable, select timeframe (90m/4H/6H/1D/1W/1M/3M), max display count (1-2)
Range 2: Second range layer for multi-timeframe analysis
Range 3: Third range layer for additional context
Reference Lines
Line Mode: Levels (H/M/L) or Quadrants (H/75/M/25/L)
Line Style: Solid, dashed, or dotted
Line Thickness: 1-4 pixels
Show Labels: Toggle reference line labels
Label Offset: Distance of labels from current price (1-20 bars)
HTF Candle Levels: Show mini H/M/L lines on HTF candles
Open Line: Vertical line at range open with customizable style
Range Boxes & Colors
Per-Range Colors: Customize box and line colors for each timeframe (90m, 4H, 6H, 1D, 1W, 1M, 3M)
HTF Candle Styling
Show HTF Candles: Toggle HTF candle display
Body/Border/Wick Colors: Customize bull and bear candle appearance
Padding/Buffer/Width: Control candle spacing and size
Labels
HTF Label: Show timeframe label above/below candles
Remaining Time: Countdown timer to candle close
Label Position: Top, Bottom, or Both
Label Alignment: Align across timeframes or follow individual candles
Imbalance
Fair Value Gap: Highlight FVGs on HTF candles
Volume Imbalance: Highlight VIs on HTF candles
HOW TO USE
Add the indicator to your chart
Choose Previous or Current mode based on your analysis preference
Use Auto mode for intelligent range selection, or Manual to select specific timeframes
Reference lines extend from range levels - watch for price reactions at H/M/L
In Current mode, observe how the range develops with real-time updates
Use the HTF candles on the right for quick multi-timeframe context
REFERENCE LINE LABELS
Labels follow this format:
Previous mode: pD-H (previous Daily High), pW-M (previous Weekly Mid), p6H-London-L (previous 6H London Low)
Current mode: D-H (Daily High), W-M (Weekly Mid), 6H-Asia-L (6H Asia Low)
6H SESSION NAMES
Asia: 18:00-00:00 ET
London: 00:00-06:00 ET
NYAM: 06:00-12:00 ET
NYPM: 12:00-18:00 ET
RECOMMENDED TIMEFRAMES
Tick/Second charts: 90m ranges
1-5 minute charts: 6H or 1D ranges
15-60 minute charts: 1D or 1W ranges
4H charts: 1W or 1M ranges
Daily charts: 1M or 3M ranges
Or simply use Auto mode to let the indicator choose the optimal range.
TIPS
The Mid (M) level often acts as equilibrium - watch for mean reversion plays
High and Low levels are natural support/resistance zones
In Current mode, watch how price interacts with the forming range boundaries
Combine with your existing analysis for confluence
The Open Line helps identify the "true open" of each range for gap analysis
DISCLAIMER
This indicator is for educational and informational purposes only.
Past performance does not guarantee future results.
Always use proper risk management and never risk more than you can afford to lose.
Trading involves substantial risk of loss and is not suitable for all investors.
CREDITS
Original indicator by @fadizeidan.
Enhanced by cephxs/fstarcapital
CHANGELOG
Pro + v1.1: Reupload + Added 90m ranges for ultra-low timeframe analysis, distance-based line filtering (lines-only mode), third range slot.
Open sourced so users can add more slots.
Enjoy 🤙
Bandz HTF Candles (PSP+SMT+T-Spot+CISD)Bandz HTF Candles (PSP + SMT + T-Spot + CISD)
This indicator is a Higher Timeframe (HTF) candle overlay that draws live HTF candles on your chart and integrates PSP triad mismatch, SMT divergence, T-Spot zones, CISD breaks, projection levels, and PFVGs into a single HTF framework.
It is designed for index trading, with primary intent for MNQ, while comparing relative behavior against MES and MYM.
The goal of this tool is to provide clear HTF context on a lower-timeframe chart by showing how correlated markets behave relative to one another while an HTF candle is forming.
What this indicator helps visualize
The structure and direction of the current HTF candle in real time
Where the HTF candle opened (via optional open trace line)
When MNQ, MES, and MYM are not aligned in HTF polarity (PSP)
When MNQ sweeps a prior HTF high or low while MES and/or MYM fail to confirm (SMT)
Where HTF-based T-Spot zones form and optionally extend forward
When a CISD-style break occurs and where projected expansion levels may appear
Where the first HTF FVG (PFVG) presents during a new HTF cycle
Core: HTF Candle Overlay
HTF candle rendering
Draws a row of HTF candles to the right of price (template style)
Candle bodies and wicks update in real time until the HTF candle closes
Optional vertical HTF start line
Optional HTF label and remaining-time label
HTF selection
Auto mode selects an HTF based on the current chart timeframe
Custom mode allows a fixed HTF (e.g., 1H, 4H, 1D, 1W)
Visual context inside HTF candles
Log-based midpoint guide lines
Template sweep visualization (HTF high/low raid with close back inside)
HTF Fair Value Gaps (FVG) and Volume Imbalances (VI)
FVG: imbalance between candle 1 and candle 3
VI: imbalance between candle 1 and candle 2 using body relationships
Open Trace Line
When enabled, a dotted line extends from the HTF candle open to the candle template, making the HTF open level visible without changing chart zoom.
PSP (Triad Mismatch)
Definition
PSP represents a polarity mismatch between three correlated instruments:
Chart symbol (intended for MNQ)
MES
MYM
A PSP condition occurs when the HTF candle polarity (bullish, bearish, or doji) is not aligned across the three instruments.
Detection logic
Polarity is determined by HTF open vs HTF close
If MNQ polarity differs from MES or MYM, the candle may qualify as PSP
Optional Turtle Soup filter
When enabled, PSP is only highlighted if MNQ also performs a prior-HTF high or low raid, helping reduce noise and focus on sweep-based context.
Display
PSP is displayed by tinting the HTF candle body:
Bullish PSP color
Bearish PSP color
Doji PSP color
Opacity is user-controlled.
SMT (HTF Divergence)
Definition
SMT (Smart Money Technique) divergence is identified when MNQ sweeps a prior HTF high or low while MES and/or MYM fail to confirm the same move.
Bearish SMT (took high)
MNQ takes a prior HTF swing high
MES and/or MYM do not take their corresponding high
Bullish SMT (took low)
MNQ takes a prior HTF swing low
MES and/or MYM do not take their corresponding low
Controls
Users can adjust SMT strictness using:
HTF lookback length
Minimum sweep distance (ticks)
Reference-level deduplication
Optional close-back-inside requirement
Optional requirement for both MES and MYM divergence
Optional persistence of SMTs
Display
A line connects the reference HTF level to the sweep level
Labels indicate which market diverged: MES, MYM, or MES/MYM
Labels are auto-positioned away from price for clarity
T-Spot Boxes
Definition
T-Spot is an HTF box system designed to highlight specific sweep, close, and midpoint-based HTF behaviors.
Features
Detects bullish and bearish T-Spot patterns
Optional directional bias filter (Bullish, Bearish, or Both)
Optional extension of the most recent box to the current bar
Optional “latest only” mode to reduce chart clutter
Display
T-Spots are drawn as translucent boxes:
Bullish T-Spot color
Bearish T-Spot color
CISD + Projections
CISD detection
When applicable (within the script logic), CISD-style breaks are detected using short candle sequences.
Detection can optionally use candle bodies instead of wicks.
Projection levels
When enabled, projected expansion levels are drawn from the CISD range.
Common projection ratios such as 0.5, 1.0, 1.5, and 2.0 can be configured and optionally extended forward.
PFVG (First Presented FVG)
PFVG highlights the first HTF Fair Value Gap that forms during a new HTF candle cycle.
Options include:
Showing or hiding PFVGs
Limiting the number of displayed PFVGs
Showing all or only the most recent PFVG
Extending the most recent PFVG until the HTF window ends
Best use
Recommended symbol: MNQ (with MES and MYM comparisons)
Recommended setup: Lower-timeframe chart with a higher HTF selected
Designed as a context and structure tool, not a signal generator
To reduce visual clutter:
Disable VI or FVG if not needed
Hide HTF sweep lines
Enable “show only latest T-Spot”
Reduce max display counts
Notes and disclaimers
This is a visual and structural analysis tool, not an automated trading strategy.
HTF candles, PSP, SMT, and related visuals may update while the HTF candle is still forming and finalize only after HTF close.
Always validate observations using your own execution model, session context, and risk management.
Credits and originality
This script builds upon prior higher-timeframe candle visualization concepts originally explored by Fadi (HTF candles), TradrKeo (GxT profiling concepts), and Cephxs.
The implementation here is original and significantly expanded. It integrates real-time HTF candle construction with multi-symbol SMT divergence, PSP triad mismatch, T-Spot logic, CISD break detection with projections, and PFVG identification into a single, unified framework. The logic, integration, and behavior of these components are custom and purpose-built for this script.
Core Of My Desire {xqweasdzxcv}
Creator's Notes
Developer: xqweasdzxcv or x²
Current Version: 2.8.3.4
Telegram: t.me
For access requests:
If anyone wants access to this indicator then DM me
Core Of My Desire - Trading Indicator Documentation
Overview
Core Of My Desire is a comprehensive trading indicator system engineered for advanced technical analysis across all markets and timeframes, with no dependency on a single asset class, trading style, or market condition. Developed by xqweasdzxcv (x²), the indicator is designed as a unified analytical framework rather than a collection of disconnected tools. It combines multiple analytical methodologies into a single, coherent system, allowing traders to evaluate price action through structure, trend, volume, momentum, and contextual market behavior simultaneously.
The system integrates market structure analysis to identify continuation and reversal phases, trend logic to establish directional bias, volume-based sentiment to validate participation, and momentum dynamics to detect acceleration or exhaustion. Supply and demand principles are incorporated to highlight areas of historical imbalance and potential reaction, while adaptive signal generation adjusts responsiveness based on changing market conditions rather than static rules. Sensitivity-based logic allows the indicator to scale between faster, more reactive behavior and slower, confirmation-driven behavior depending on user calibration.
Risk management is not treated as an external concept but is embedded directly into the indicator’s design. Dynamic support and resistance references, projected take-profit structures, re-entry logic, and exhaustion detection are provided to assist with trade planning, position management, and exit decision-making. Signals are designed to function as informational guidance within a broader discretionary process, emphasizing confluence and context over isolated triggers.
Core Of My Desire is intended for disciplined traders who understand that no indicator can predict the market. Its purpose is to organize complex market information into a readable, adaptive framework that supports structured analysis, informed execution, and consistent decision-making across varying market environments.
Core Philosophy
This indicator provides confluence from multiple analytical perspectives:
• Market structure defines context
• Trend determines directional bias
• Volume confirms participation
• Momentum identifies continuation or exhaustion
• Supply and demand highlight reaction zones
• Risk management governs execution
No single component is intended to be used in isolation.
Key Features
Adaptive Signal Generation
• Primary Buy and Sell signals with adjustable sensitivity
• Optional Trend Cloud filter for directional confirmation
• Configurable confirmation latency
• Strength-based labeling for signal quality
Market Structure Analysis
• Swing and Internal structure tracking
• Dynamic and Manual analysis modes
• BOS, CHoCH, and CHoCH+ detection
• Equal Highs and Lows identification
• Structural labeling (HH, HL, LH, LL)
Multi-Timeframe Dashboard
• Volume sentiment across 8 timeframes (1m to Daily)
• Market state detection (Trending or Ranging)
• Volatility awareness
• Active position tracking
• Trading session identification:
• Sydney
• Tokyo
• London
• New York
Supply and Demand Zones
• Preset configurations:
• Standard
• Majors
• Nearest
• Custom
• Automatic validation on price interaction
• Visual feedback based on zone strength
• Progressive fading of invalidated zones
• Automatic cleanup for chart performance
Risk Management System
• Dynamic Support and Resistance bands
• Three Take-Profit levels with configurable ratios
• Peak Profit alerts for position management
• Three-tier Re-Entry signals
• Reversal detection near key price areas
Technical Analysis Suite
• Nine moving average types
• Zero-Lag EMA
• Fibonacci retracement levels
• Fair Value Gaps (FVG)
• Multi-timeframe Support and Resistance
• Trendline breakout detection
• Structure breakout confirmation
• Divergence-based tactical signals
• Momentum fluctuation detection
Visual Customization
• Multiple candle coloring modes
• Adaptive bands with overbought and oversold markers
• Trend Cloud visualization
• Optional background coloring
• Fully customizable color themes
Signal Classification
Primary Entry Signals
• BUY and SELL labels
• Strength tiers:
• Buy
• Strong Buy
• Very Strong Buy
• Optional Trend Cloud confirmation
• Intended for core trade entries
Directional Bias Signals
• Up Trend and Down Trend indicators
• Macro trend context
• Adjustable sensitivity (0.1–20.0)
• Optional Heikin Ashi smoothing
Reversal Signals
• Three intensity levels
• Exhaustion and exit indications
• Counter-trend opportunity identification
Peak Profit Signals
• Extreme condition alerts
• Trade-aware and position-specific
• Designed to protect unrealized gains
• Frequently precede reversals
Re-Entry Signals
• Small arrow markers
• Three progressive entry levels
• Pullback-based continuation entries
• Displayed only during active trades
Structure Breakout Signals
• Triangle markers
• Body-close confirmation logic
• Adjustable lookback period (5–50)
• Used to confirm decisive breaks
Tactical Signals
• Divergence-based arrows
• Contrarian in nature
• Higher risk, higher reward profile
Fluctuation Signals
• Momentum-based arrows
• Volume or Volatility modes
• Rapid shift detection
• Best suited for scalping conditions
Settings Guide
Sensitivity
• Default: 4.5
• Range: 0.1–20.0
Behavior:
• Lower values produce faster signals with increased noise
• Higher values reduce signal frequency but improve confirmation
Adjustment guidelines:
• Excessive false signals → Increase sensitivity
• Missed opportunities → Decrease sensitivity
Trend Cloud Filter
• Multiplier: 4.3
• ATR Length: 27
• Confirmation latency: 2–20 bars (default 5)
Purpose:
• Enforces trend alignment
• Reduces counter-trend signals
• Introduces intentional confirmation delay
Supply and Demand Presets
• Standard: Balanced, suitable for most use cases
• Majors: Key levels only, ideal for higher timeframes
• Nearest: Recent price focus, optimal for scalping
• Custom: Full user-defined control
Risk Management (Take-Profit Structure)
• TP1: Fixed at 1:1
• TP2 Multiplier: 0.5 (default)
• TP3 Multiplier: 1.5 (default)
Common configurations:
• Conservative: 0.5 / 1.0
• Balanced: 1.0 / 2.0
• Aggressive: 1.5 / 3.0
Performance Notes
• High computational complexity
• Optimized for 1m–4H timeframes
• No repainting on closed candles
• Certain signals intentionally wait for confirmation
Final Thoughts
Core Of My Desire is a professional-grade analytical framework that requires understanding and practice. It's not a "magic button" - it's a sophisticated toolset for serious traders.
Your success depends on:
Proper calibration for your specific market
Understanding what each signal represents
Having a solid trading plan
Disciplined risk management
Continuous learning and adaptation
Legal Disclaimer
Educational and informational purposes only. Trading involves substantial risk of loss and is not suitable for every investor. Past performance is not indicative of future results.
You acknowledge:
You trade at your own risk
No profitability guarantees
Never risk more than you can afford to lose
Risk management is your responsibility
This is a tool, not financial advice
Top 40 Best Performing Nasdaq Stocks with Advanced Stats ScreenWelcome to the CustomQuantLabs Advanced Stats Screener. This dashboard is designed for traders who need more than just price action—it provides a comprehensive, institutional-grade view of the "Top 40" performing assets in the Nasdaq (or any watchlist of your choice) at a single glance.
Instead of flipping through 40 different charts, this screener aggregates Performance Metrics and Advanced Statistical Risk Models into one clean, heatmap-style dashboard. It helps you instantly identify outliers, trend leaders, and potential mean-reversion setups.
Key Features
1. Multi-Timeframe Performance Heatmap Instantly spot momentum. The dashboard tracks returns across 5 key timeframes, color-coded with a dynamic heatmap (Bright Green for leaders, Bright Red for laggards):
Week% (Short-term momentum)
Month% & Quarter% (Medium-term trend)
6M% & 12M% (Long-term secular trend)
2. Institutional Risk Metrics (Advanced Stats) We go beyond simple percentage changes. This screener calculates complex statistical formulas for every single ticker in real-time:
Kelly Criterion (%): A money management formula used to determine optimal position size based on win probability and return ratio. A higher Kelly % suggests a statistically stronger "edge" based on recent history.
Sharpe Ratio: Measures risk-adjusted return. How much return are you getting for every unit of risk? (Values > 1.0 are generally considered good).
Sortino Ratio: Similar to Sharpe, but only penalizes downside volatility. This is crucial for distinguishing between "good volatility" (upside pumps) and "bad volatility" (crashes).
Z-Score: A mean-reversion metric. It measures how many standard deviations the current price is from its 20-day mean.
High Positive Z-Score (>2): Price may be overextended to the upside.
Low Negative Z-Score (<-2): Price may be oversold.
Volatility (%): A dynamic measure of the asset's daily range, helping you gauge the "personality" of the stock before entering.
Customization & Settings
Fully Customizable Watchlist: While pre-loaded with top Nasdaq performers (like NVDA, AMD, PLTR, MU), you can easily edit the "Symbols" input in the settings to track Crypto, Forex, or your own custom stock portfolio.
Smart Theme Detection: Includes a toggle for Dark Mode (ProjectSyndicate style) and Light Mode (Clean white style).
Compact Mode: You can toggle specific columns on or off to fit the table on smaller screens.
How to Use
Add the script to your chart.
Open Settings (Gear Icon).
Paste your list of 40 tickers into the "Ticker List" text area (separated by commas).
Use the Z-Score to find overbought/oversold setups and the Relative Strength (Week/Month) to find breakout candidates.
Disclaimer: This tool is for informational purposes only. The "Top 40" list requires manual updating if the market leaders change. All statistical metrics (Kelly, Sharpe, etc.) are based on historical data and do not guarantee future performance.
Built by CustomQuantLabs.
cephxs / Quarterly Theory [Ultimate +]QUARTERLY THEORY
Multi-cycle Sequential SMT divergence analysis with 7-layer time fractal detection, PSP swing points, CISD momentum tracking, Purge visualization, and a comprehensive alert system with preset combinations.
This indicator is subject to the terms of the Mozilla Public License 2.0.
WHAT IT DOES
The Quarterly Theory indicator maps Trader Daye's time-based market cycles—from Monthly down to Nano—and detects SSMT (Sequential SMT) divergences across correlated assets within each cycle. It tracks when your chart asset and its correlated pairs disagree on highs and lows, often preceding significant reversals.
This is NOT a signal generator. It is a divergence detection tool designed to show you WHEN correlated markets are disagreeing within the natural rhythm of time cycles—information that helps identify high-probability turning points.
-- IMAGE: Main indicator view showing SSMT lines across multiple cycles --
CORE CONCEPTS
Quarterly Theory Time Cycles
The indicator tracks 7 nested time cycles based on ICT/Daye's Quarterly Theory:
Monthly: Week-based quarters within each month (Q1-Q4)
Weekly: Daily quarters within each trading week
Daily: Session-based quarters (Asia, London, NY AM, NY PM)
90m: 90-minute cycles divided into quarters (~22.5 minutes each)
30m: 30-minute cycles (90m divided by 3)
Micro: 64 sessions per day (~22.5 minutes each)
Nano: 256 sessions per day (~5-6 minutes each) - optional high-resolution mode (basically each Micro session divided by 4)
Each cycle has its own SSMT detection, allowing you to see divergences across multiple time fractals simultaneously.
SSMT (Sequential SMT) Divergences
SSMT tracks when correlated assets disagree on extremes within a time cycle:
Bullish SSMT: Primary asset makes a lower low while correlated asset makes a higher low
Bearish SSMT: Primary asset makes a higher high while correlated asset makes a lower high
Lines connect the divergent extremes, providing visual confirmation of market disagreement.
Normal vs Hidden Divergences
Normal: Wick-based extremes—traditional SMT comparing session highs and lows
Hidden: Body-based extremes—more selective, comparing close prices for stronger signals according to some.
You can display Normal only, Hidden only, or Both for maximum information—flexible.
All of these lines have robust labels and dual label handling for when correlations occur with two of the assets in the triad at once to avoid collision.
PSP (Precision Swing Points)
A PSP is not just a pivot—it is a pivot WITH a divergence on the closure. When one asset makes a new high or low but correlated assets FAIL to confirm, the pivot becomes a Precision Swing Point. These often mark significant turning points. It also highlights PSPs that are not divergences for even more advanced analyses and alerts.
Example: ES closes bullish on a candle, but NQ closes bearish. If this occurs at a pivot point, the C2 candle is flagged as a PSP on the chart itself. The indicator also allows one to filter PSPs based on proximity to an existing SMT Divergence.
CISD (Change In State of Delivery)
CISD identifies momentum shifts after pivot formation by detecting opposing candle stretches and confirming when price closes beyond the stretch level. This helps validate directional commitment. It uses a custom pivot system to track originating trends.
Purge Detection
Purges occur when price sweeps through a previous pivot level (liquidity grab). The indicator tracks these events with solid/dotted line visualization and optional alerts.
KEY FEATURES
7-Layer Cycle Detection: Monthly, Weekly, Daily, 90m, 30m, Micro, and Nano cycles all computed simultaneously
Auto Timeframe Gating: Automatically shows relevant cycles based on your chart timeframe. On 15m, you see Daily SSMT. On 1m, you see Micro and 30m SSMT.
Dual Detection Modes: Normal (wick) and Hidden (body) divergence detection per cycle
Automatic Asset Correlation: Uses the same AssetCorrelationUtils library as our other tools—auto-detects correlated pairs or configure manually
Per-Cycle Colors: Customize bull/bear colors for each cycle level
Pivot Time Labels: Optional time labels at swing points with key time highlighting
Purge Visualization: Solid lines for confirmed purges, dotted extensions while active
CISD with Size Filter: ATR-based filtering to ignore insignificant stretches
THE ALERT SYSTEM
The Quarterly Theory indicator provides a comprehensive alert system with multiple layers:
Individual Event Alerts
Swing High/Low: Alert when a new pivot forms
Purge High/Low: Alert when price sweeps through a pivot level
CISD Pending/Confirmed: Alert on momentum shift detection
SSMT per Cycle: Individual alerts for Monthly, Weekly, Daily, 90m, 30m, Micro divergences
CISD Model Combo Alerts
Pre-built alert presets that combine SSMT + CISD confirmation per cycle:
Monthly SSMT + CISD
Weekly SSMT + CISD
Daily SSMT + CISD
90m SSMT + CISD
30m SSMT + CISD
Micro SSMT + CISD
Stacked (multiple cycles aligning)
PSP Model Combo Alerts
Alerts when a Precision Swing Point forms with SSMT confirmation:
PSP + SSMT per cycle
PSP + Stacked SSMT (multiple cycles)
Directional filtering (bullish/bearish only)
Alert Kitchen - Custom Combos
Build your own alert conditions by combining:
Any cycle level (or multiple)
Direction (bullish/bearish/both)
Detection type (Normal/Hidden/Both)
Additional filters (CISD, PSP, Purge/Sweep)
Session Filter
Restrict alerts to specific trading sessions: Asia, London, NY AM, NY PM, London + NY, or define a custom time window.
-- IMAGE: Alert settings panel --
Will be streamlining the inputs to allow for an improved UX.
HOW TO USE IT
Getting Started (2 minutes)
Add the indicator to your chart
SSMT lines will appear automatically based on your timeframe
Each colored line represents a divergence at that cycle level
Labels show the cycle name and/or correlated asset
Understanding the Display
Lines connecting highs = Bearish SSMT (potential reversal down)
Lines connecting lows = Bullish SSMT (potential reversal up)
Solid lines = Normal divergence (wick-based)
Dotted lines = Hidden divergence (body-based)
Line color = Cycle level (customizable per cycle)
Adjusting Timeframe Visibility
Auto: Shows only the most relevant cycle for your chart TF
All: Shows all enabled cycles regardless of chart TF
Extended: Broader visibility ranges per cycle
Custom: Define exact min/max TF ranges per cycle
Configuring Asset Correlation
Go to Asset Selection settings
Set to Auto (detects correlated assets automatically)
Or set to Manual and enter custom ticker symbols
Use Invert Asset 3 for inverse correlations (e.g., DXY vs EUR/USD)
Pro Tips
Start with Auto timeframe gating to reduce clutter
Focus on one or two cycle levels until you understand the rhythm
Enable Hidden divergence for higher-probability signals
Use the Directional Bias Filter to focus on one direction only
The Status Bar shows current cycle states at a glance
-- IMAGE: Status bar showing active cycles vs when it's not active --
INPUT SETTINGS OVERVIEW
These inputs may change as updates roll out with improvements.
Visual Preset
Preset options: SSMT Only, SSMT + CISD, SSMT + Purge, CISD + Purge, All Features
Directional Bias Filter: All, Bullish only, Bearish only
SSMT Plots (Section 2)
Show SSMT master toggle
Labels toggle with size and color
Label Mode: Cycle + Asset, Cycle only, Asset only
Timeframe Gating: Auto, All, Extended, Custom
Detection Mode: Normal, Hidden, All
Per-cycle toggles and colors (Monthly through Nano)
Min/Max TF ranges for Custom mode
Pivot & PSP Settings (Section 3)
Show swing high/low shapes
Shape styles and colors
Show pivot lines with crossing style
PSP highlighting options
Pivot Time Labels (Section 3.5)
Show Time Labels toggle
Key time highlighting (macros)
Label styling options
Purge Settings (Section 4)
Show purge lines
Solid/dotted line styles
Line colors for bull/bear
CISD Settings (Section 5)
Show CISD toggle
Maximum CISDs displayed
Size filter (ATR-based)
Bull/bear colors
Alert Sections (6-11)
Master switches
Session filter
Individual event alerts
CISD model combos
PSP model combos
Alert Kitchen custom combos
Asset Selection (Section 12)
Correlation Preset: Off, Auto, Manual
Manual Asset 1/2/3 inputs
Invert Asset 3 for inverse correlations
Status Bar (Section 13)
Position, size, colors
Shows active cycle states
SUPPORTED MARKETS
The built-in correlation library automatically detects pairs for:
Index Futures: NQ/ES/YM/RTY and micro variants
Forex: EUR/GBP/DXY triad, USD/JPY/CHF triad, CAD pairs
Crypto: BTC/ETH/TOTAL3, SOL/XRP pairs, major alts
Metals: Gold/Silver/Copper
Energy: Crude/Gasoline/Heating Oil
Treasuries: ZB/ZF/ZN
For assets not covered, use Manual mode to define your own correlation group.
AUTOMATICALLY RECOMMENDED TIMEFRAMES
1m: See Micro and 30m cycles
3m-5m: See 90m and 30m cycles
15m: See Daily cycle
1H: See Weekly cycle
4H: See Monthly cycle
Use Extended or Custom mode to see multiple cycles simultaneously.
TERMINOLOGY QUICK REFERENCE
QT: Quarterly Theory (time-based cycle analysis)
SSMT: Sequential SMT (divergence within a time cycle)
SMT: Smart Money Technique (divergence between correlated assets)
PSP: Precision Swing Point (pivot with divergence)
CISD: Change In the State of Delivery (confirmed directional shift)
Purge: Liquidity sweep through a pivot level
Normal: Wick-based divergence detection
Hidden: Body-based divergence detection
Q1/Q2/Q3/Q4: Quadrants within each cycle
PERFORMANCE NOTES
Micro cycle (64 sessions) adds significant computation load and makes the tool unbearably slow—disable if not needed
30m cycle (48 sessions) is an alternative to Micro with less load
Nano cycle (256 sessions) is optional and only active below 1m timeframes
Use Auto timeframe gating to reduce unnecessary computations
A bar limiter is implemented at the bottom for performance considerations, prioritizing real-time analysis.
DISCLAIMER
This indicator is for educational and informational purposes only. It does not constitute financial advice. Trading involves substantial risk of loss and is not suitable for all investors. Past performance does not guarantee future results. Always use proper risk management and conduct your own analysis before making trading decisions.
CREDITS
Developed by cephxs and fstarcapital
Uses AssetCorrelationUtils library by fstarcapital for automatic correlation detection
Conceptual Credits
This Indicator uses Concepts by the Inner Circle Trader, Michael Huddleston.
This Indicator uses concepts from Quarterly Theory as taught by TraderDaye.
VERSION
PineScript v6 | Ultimate+ Edition
HOB ArchiveHistorical HOB & PHOB Structural Archive
Distinction: Real-Time Detection vs. Historical Archiving
It is important to distinguish this tool from standard "Hidden Orderblock" detectors (including our own real-time versions). While standard indicators are designed to highlight current trade opportunities by showing only active zones, this Historical Archive is a specialized environment for Quantitative Market Structure Analysis.
Standard indicators typically remove zones once they are breached (mitigation). This script utilizes a Persistence Algorithm that maintains every detected zone, allowing traders to analyze how price interacts with "old" liquidity over hundreds of bars—a feature essential for institutional backtesting that real-time tools cannot provide.
Unique Technical Logic: The Overlap Engine
The core of this script is a unique calculation engine that evaluates the "Hidden" status of a candle based on its geometric relationship with the following Fair Value Gap (FVG):
The 100% Eclipsed Logic (HOB): The script identifies a "Hidden" block only when the entire price range of a candle (including wicks) is mathematically eclipsed by the vacuum of a subsequent FVG.
The Threshold-Based Partial Logic (PHOB) : This is where this tool becomes a standalone research utility. Users can input a specific percentage (e.g., 65%). If the FVG only covers that specific portion of the previous candle, it is logged as a PHOB. This allows for a granular study of "Leaking Liquidity," which standard HOB indicators ignore.
Standalone Value & Originality
To comply with TradingView’s House Rules on originality, this script introduces three specific functions not found in basic OB toolsets:
Non-Destructive Data Retention : Every HOB/PHOB is treated as a permanent structural pivot. This allows for the study of "S/R Flips," where an old, broken Hidden Orderblock later acts as a perfect retest level.
Adaptive Label Consolidation : Because historical data can become dense, we developed a custom logic to merge overlapping labels. This ensures that even with 500+ bars of history, the chart remains readable.
Backtest-Optimized Calculations : The script’s backend is optimized to handle high-depth history arrays, ensuring that the visual "Archive" does not cause UI lag, which is a common technical hurdle for historical indicators.
How to Use for Research
Identify Institutional Footprints: Use the HOBs to see where price was delivered so quickly that orders were "trapped" behind an FVG.
Statistical Backtesting : Scroll back through weeks of data to observe the "Sensitivity" of PHOBs compared to full HOBs.
Confluence Mapping : Overlay this with your primary strategy to see if your entries align with these historical high-volume footprints.
Note to Moderators: This script is a unique standalone tool designed for historical data analysis. It uses a proprietary percentage-based detection logic for Partial Hidden Orderblocks and a non-destructive rendering system that differs fundamentally from "live-trading" indicators that delete mitigated zones.
Multi-Exchange Liquidation Map [Composite]Multi-Exchange Liquidation Heatmap
Institutional-Grade Liquidity Mapping (Pine Script v6)
🔵 Overview
The Multi-Exchange Liquidation Heatmap is a sophisticated visualization tool designed to reveal "Price Magnets" and "Max Pain" levels where high-leverage traders are forcibly liquidated. Unlike traditional volume profiles that only show past trades, this indicator projects future risk zones based on exchange margin-call mathematics.
By aggregating real-time data from Binance, Bybit, BitMEX, Coinbase, and Bitfinex, it provides a "composite" view of the market. This allows you to spot liquidity clusters that are invisible if you only monitor a single exchange.
⚙️ How It Works: The Logic
The script operates on a deterministic mathematical model rather than a heuristic/estimated one:
Pivot Detection: It identifies significant Swing Highs and Swing Lows (Pivots) across all enabled exchanges.
Margin Mathematics: For every pivot, it calculates exact liquidation prices for 100x, 50x, and 25x leverage tiers using the standard exchange formulas:
*
Long Liquidation: Pliq=Pentry×(1−L1)
Short Liquidation: Pliq=Pentry×(1+L1)
*
Composite Aggregation: Because a "wick" might be deeper on Bybit than on Binance , the script marks both levels. This creates a more accurate and denser "Liquidity Wall."
Heatmap Visuals (Alpha Blending): Each zone is drawn with 95% transparency. When levels from different exchanges or different leverage tiers overlap at the same price, the color intensifies (darkens). These "hot zones" represent high-probability reversal or acceleration points.
Dynamic Sweeping: To keep your chart clean, the script automatically deletes a box once the market price "sweeps" through it. This ensures you only see untaken liquidity.
🛠️ How to Setup & Configure
1. Multi-Exchange Input
In the settings, you can toggle specific data feeds:
Binance & Bybit: Pre-configured for Perpetual contracts (e.g., BINANCE:BTCUSDTPERP).
BitMEX: Captures "Starved Whales" and older market participants.
Coinbase (Spot): While Spot has no liquidations, traders use Coinbase Swing points for Stop-Losses. Zoned at 25x to represent "Hedging Support."
Custom / Hyperliquid Proxy: Since Hyperliquid isn't native to TV yet, use this field to input a custom ticker (e.g., OKX:BTCUSDTPERP or BYBIT:HYPEUSDT.P).
2. Filtering & Sensitivity
Volume Filter Multiplier: Only pivots with a volume spike (e.g., 1.5x the 50-SMA) generate zones. This filters out retail "noise" and focuses on institutional entries.
Pivot Lookback: Set how many candles are required to confirm a swing. A value of 5 is ideal for intraday trading.
📈 Trading Strategy: Liquidations vs. Volatility
How to Trade:
The Magnet Effect: Price is attracted to dense "Heatmap" clusters. Use these zones as Take-Profit targets.
The Exhaustion Signal: When price slams into a 50x or 100x liquidation zone and then pulls back, it is a high-confidence signal that the "fuel" for the move has been exhausted.
The Cascade: If 100x liquidations trigger a move into 50x levels, expect a rapid "cascade" or "flash wick."
⚠️ Technical Performance
This script is built on Pine Script v6, utilizing User-Defined Types (UDT) and Matrix-based Garbage Collection for maximum efficiency.
Request Limit: TradingView limits scripts to 40 request.security calls. This script uses approximately 10-15 calls, leaving you plenty of headroom for other indicators.
Resolution: For the best results, use the 5m, 15m, or 1h timeframes.
Disclaimer: Liquidation levels are theoretical proxies based on common leverage settings. This tool should be used as confluence for price action and market structure analysis.
Multi-Timeframe Trend Indicator with RSIEnhanced version of the original Multi-Timeframe Trend Indicator by @Ox_kali
This indicator analyzes trend direction across multiple timeframes using moving average crossovers. The original version by @Ox_kali has been enhanced with RSI (Relative Strength Index) functionality for more comprehensive market analysis.
Key Features:
- Multi-Timeframe Trend Analysis : Compares short-term vs. long-term moving averages across 14 different timeframes
- RSI Enhancement : Adds RSI readings for each timeframe with configurable overbought/oversold levels
- Visual Table Display : Shows trend direction (Up/Down) and RSI values in a color-coded table
- Average Trend Calculation : Computes an overall market bias from all active timeframes
- Customizable Alerts : Notifies on trend reversals and RSI extremes
Credits:
Original Multi-Timeframe Trend Indicator by @Ox_kali • RSI enhancement added for improved momentum analysis.
