Auf geht's

Educational

TSM + ADX Trend PowerLogic Behind This Indicator This indicator combines two momentum/trend tools to identify strong, reliable trends in price movement: 1. TSM (Time Series Momentum) What it does: Measures the difference between the current price and a smoothed average of past prices. Formula: EMA(close - EMA(close, 14), 14) Logic: If TSM > 0 → Price is above its recent average = upward momentum If TSM < 0 → Price is below its recent average = downward momentum 2. ADX (Average Directional Index) What it does: Measures trend strength (not direction). Logic: ADX > 25 → Strong trend (either up or down) ADX < 25 → Weak or no trend (choppy/sideways market) Combined Logic (TSM + ADX) The indicator only signals a trend when both conditions are met: Condition Meaning Uptrend TSM > 0 AND ADX > 25 → Strong upward momentum Downtrend TSM < 0 AND ADX > 25 → Strong downward momentum No signal ADX < 25 → Trend is too weak to trust What It Aims to Detect Strong, sustained trends (not just noise or small moves) Filters out weak/choppy markets where momentum indicators often give false signals Entry/exit points: Green background = Strong uptrend (consider buying/holding) Red background = Strong downtrend (consider selling/shorting) No color = Weak trend (stay out or wait)
Pine Script® Indikator
von Zorgs
Crypto Mean Reversion System (Pullback & Bounce)Mean Reversion Theory The indicator operates on the principle that extreme price movements in crypto markets tend to revert toward their mean over time. Consider this a valuable aid for your dollar-cost averaging strategy, effectively identifying periods ripe for accumulating or divesting from the market. Research shows that: Short-term momentum often persists briefly after surges, but extreme moves trigger mean reversion Sharp drops exhibit strong bounce patterns, especially after capitulation events Longer timeframes (7-day) show stronger mean reversion tendencies than shorter ones (1-day) Timeframe Analysis 1-Day Timeframe Pullback probabilities: 45-85% depending on surge magnitude Bounce probabilities: 55-95% depending on drop severity Captures immediate overextension and panic selling More volatile but faster signal generation 7-Day Timeframe Pullback probabilities: 50-90% (higher confidence) Bounce probabilities: 50-90% (slightly moderated) Filters out noise and identifies sustained trends Stronger mean reversion signals due to extended moves Probability Tiers Pullback Risk (After Surges) Moderate (45-60%): 5-10% surge → Expected -3% to -12% pullback High (55-70%): 10-15% surge → Expected -5% to -18% pullback Very High (65-80%): 15-25% surge → Expected -10% to -25% pullback Extreme (75-90%): 25%+ surge → Expected -15% to -40% pullback Bounce Probability (After Drops) Moderate (55-65%): -5% to -10% drop → Expected +3% to +10% bounce High (65-75%): -10% to -15% drop → Expected +6% to +18% bounce Very High (75-85%): -15% to -25% drop → Expected +10% to +30% bounce Extreme (85-95%): -25%+ drop → Expected +18% to +45% bounce The probability ranges are derived from: Crypto volatility patterns: Higher volatility than traditional assets creates stronger mean reversion Behavioral finance: Extreme moves trigger emotional trading (FOMO/panic) that reverses Historical backtesting: Probability estimates based on typical reversion patterns in crypto markets Timeframe correlation: Longer timeframes show increased reversion probability due to reduced noise Key Features Dual-direction signals: Identifies both overbought (pullback) and oversold (bounce) conditions Multi-timeframe confirmation: 1D and 7D analysis for different trading styles Customizable thresholds: Adjust sensitivity based on asset volatility Visual alerts: Color-coded labels and table for quick assessment Risk categorization: Clear severity levels for position sizing
Pine Script® Indikator
von Zorgs
Stop Hunt Candlesticks (Liquidity Wicks)🕯️ Stop Hunt Candlesticks Wick Highlighter – Spot Extreme Wicks Instantly This indicator highlights candles where the upper or lower wick exceeds a customizable percentage of the asset’s price — perfect for quickly spotting strong rejections, liquidity grabs, stop hunts or exhaustion moves. 💡 Key Features Visual Background Highlight: Automatically colors the chart background when a wick surpasses your defined % threshold (default 1%). Customizable Threshold: Adjust wick sensitivity to suit different assets or timeframes. Upper & Lower Wick Filters: Choose whether to track upper wicks, lower wicks, or both. Dynamic Price Basis: Compare wick size relative to Close, Open, HL2, or OC2. Optional Labels: Display the exact wick percentage directly on the chart. Alerts Ready: Get notified whenever a candle shows an extreme wick condition. ⚙️ How It Works The script measures each candle’s wick size relative to your chosen price basis: Upper wick % = (High − max(Open, Close)) / Basis × 100 Lower wick % = (min(Open, Close) − Low) / Basis × 100 If the result exceeds your chosen threshold, the chart background changes color. Red for upper wicks, green for lower wicks by default. 🎯 Use Cases Identify strong rejections or stop hunts near key levels. Confirm price exhaustion or potential reversals. Filter fake breakouts or high-volatility events. 🧩 Customization Tweak colors, transparency, and label visibility to fit seamlessly into your chart setup.
Pine Script® Indikator
von AGreatEscape
Aladin Pair Trading System v1Aladin Pair Trading System v1 What is This Indicator? The Aladin Pair Trading System is a sophisticated tool designed to help traders identify profitable opportunities by comparing two related stocks that historically move together. Think of it as finding when one twin is running ahead or lagging behind the other - these moments often present trading opportunities as they tend to return to moving together. Who Should Use This? Beginners: Learn about statistical arbitrage and pair trading Intermediate Traders: Execute mean-reversion strategies with confidence Advanced Traders: Fine-tune parameters for optimal pair relationships Portfolio Managers: Implement market-neutral strategies 💡 What is Pair Trading? Imagine two ice cream shops next to each other. They usually have similar customer traffic because they're in the same area. If one day Shop A is packed while Shop B is empty, you might expect this imbalance to correct itself soon. Pair trading works the same way: You find two stocks that normally move together (like TCS and Infosys) When one stock moves too far from the other, you trade expecting them to realign You buy the lagging stock and sell the leading stock When they come back together, you profit from both sides Key Features 1. Z-Score Analysis What it is: A statistical measure showing how far the price relationship has deviated from normal What it means: Z-Score near 0 = Normal relationship Z-Score at +2 = Stock A is expensive relative to Stock B (Sell A, Buy B) Z-Score at -2 = Stock A is cheap relative to Stock B (Buy A, Sell B) 2. Multiple Timeframe Analysis Long-term Z-Score (300 bars): Shows the big picture trend Short-term Z-Score (100 bars): Shows recent movements Signal Z-Score (20 bars): Generates quick trading signals 3. Statistical Validation The indicator checks if the pair is suitable for trading: Correlation (must be > 0.7): Confirms the stocks move together 1.0 = Perfect positive correlation 0.7 = Strong correlation Below 0.7 = Warning: pair may not be reliable ADF P-Value (should be < 0.05): Tests if the relationship is stable Low value = Good for pair trading High value = Relationship may be random Cointegration: Confirms long-term equilibrium relationship YES = Pair tends to revert to mean NO = Pair may drift apart permanently Visual Elements Explained Chart Zones (Color-Coded Areas) Yellow Zone (-1.5 to +1.5) Normal Zone: Relationship is stable Action: Wait for better opportunities Blue Zone (±1.5 to ±2.0) Entry Zone: Deviation is significant Action: Prepare for potential trades Green/Red Zone (±2.0 to ±3.0) Opportunity Zone: Strong deviation Action: High-probability trade setups Beyond ±3.0 Risk Limit: Extreme deviation Action: Either maximum opportunity or structural break Signal Arrows Green Arrow Up (Buy A + Sell B): Stock A is undervalued relative to B Buy Stock A, Short Stock B Red Arrow Down (Sell A + Buy B): Stock A is overvalued relative to B Sell Stock A, Buy Stock B Settings Guide Symbol Inputs Pair Symbol (Symbol B): Choose the second stock to compare Default: NSE:INFY (Infosys) Example pairs: TCS/INFY, HDFCBANK/ICICIBANK, RELIANCE/ONGC Z-Score Parameters Long Z-Score Period (300): Historical context Short Z-Score Period (100): Recent trend Signal Period (20): Trading signals Z-Score Threshold (2.0): Entry trigger level Higher = Fewer but stronger signals Lower = More frequent signals Statistical Parameters Correlation Period (240): How many bars to check correlation Hurst Exponent Period (50): Measures mean-reversion tendency Probability Lookback (100): Historical probability calculations Trading Parameters Entry Threshold (0.0): Minimum Z-score for entry Risk Threshold (1.5): Warning level Risk Limit (3.0): Maximum deviation to trade How to Use (Step-by-Step) Step 1: Choose Your Pair Add the indicator to your chart (this becomes Stock A) In settings, select Stock B (the comparison stock) Choose stocks from the same sector for best results Step 2: Verify Pair Quality Check the Statistics Table (top-right corner): ✅ Correlation > 0.70 (Green = Good) ✅ ADF P-value < 0.05 (Green = Good) ✅ Cointegrated = YES (Green = Good) If all three are green, the pair is suitable for trading! Step 3: Wait for Signals BUY SIGNAL (Green Arrow Up) Z-Score crosses above -2.0 Action: Buy Stock A, Sell Stock B Exit: When Z-Score returns to 0 SELL SIGNAL (Red Arrow Down) Z-Score crosses below +2.0 Action: Sell Stock A, Buy Stock B Exit: When Z-Score returns to 0 Step 4: Risk Management Yellow Zone: Monitor only Blue Zone: Prepare for entry Green/Red Zone: Active trading zone Beyond ±3.0: Maximum risk - use caution ⚠️ Important Warnings Not All Pairs Work: Always check the statistics table first Market Conditions Matter: Correlation can break during market stress Use Stop Losses: Set stops at Z-Score ±3.5 or beyond Position Sizing: Trade both legs with appropriate hedge ratios Transaction Costs: Factor in brokerage and slippage for both stocks Example Trade Scenario: TCS vs INFOSYS Correlation: 0.85 ✅ Z-Score: -2.3 (TCS is cheap vs INFY) Action to be taken: Buy 1lot of TCS Future Sell 1lot of INFOSYS Future Expected Outcome: As Z-Score moves toward 0, TCS outperforms INFOSYS Close both positions when Z-Score crosses 0 Profit from the convergence Best Practices Test Before Trading: Use paper trading first Sector Focus: Choose pairs from the same industry Monitor Statistics: Check correlation daily Avoid News Events: Don't trade pairs during earnings/major news Size Appropriately: Start small, scale with experience Be Patient: Wait for high-quality setups (±2.0 or beyond) What Makes This Indicator Unique? Multi-timeframe Z-Score analysis: Three different perspectives Statistical validation: Built-in correlation and cointegration tests Visual risk zones: Easy-to-understand color-coded areas Real-time statistics: Live pair quality monitoring Beginner-friendly: Clear signals with educational zones Technical Background The indicator uses: Engle-Granger Cointegration Test: Validates pair relationship ADF (Augmented Dickey-Fuller) Test: Tests stationarity Pearson Correlation: Measures linear relationship Z-Score Normalization: Standardizes deviations Log Returns: Handles price differences properly Support & Community For questions, suggestions, or to share your pair trading experiences: Comment below the indicator Share your successful pair combinations Report any issues for quick fixes Disclaimer This indicator is for educational and informational purposes only. It does not constitute financial advice. Pair trading involves risk, including the risk of loss. Always: Do your own research Understand the risks Trade with money you can afford to lose Consider consulting a financial advisor 📌 Quick Reference Card Z-ScoreInterpretationAction-3.0 to -2.0A very cheap vs BStrong Buy A, Sell B-2.0 to -1.5A cheap vs BBuy A, Sell B-1.5 to +1.5Normal rangeHold/Wait+1.5 to +2.0A expensive vs BSell A, Buy B+2.0 to +3.0A very expensive vs BStrong Sell A, Buy B Good Pair Statistics: Correlation: > 0.70 ADF P-value: < 0.05 Cointegration: YES Version: 1.0 Last Updated: 10th October 2025 Compatible: TradingView Pine Script v6 Happy Trading!
Pine Script® Indikator
von kingshukghosh71
8
Adaptive Nexus LineAdaptive Nexus Line Overview The Adaptive Nexus Line is not just another moving average. It's a next-generation, composite indicator designed to provide a comprehensive and visually intuitive baseline for trend analysis and momentum. At its core, the Adaptive Nexus Line synthesizes a "cluster" of multiple moving averages into a single, cohesive line. This "average of averages" approach reduces market noise and provides a more stable and reliable representation of the trend than a traditional, single MA. The name reflects its core strengths: "Adaptive" for its intelligent Kalman filter smoothing, and "Nexus" because it serves as a central point, bringing together a wide array of moving average types. ________________________________________ Key Features • Composite Engine: Instead of a single MA, the Adaptive Nexus Line averages a user-defined cluster of MAs (e.g., 20 MAs with lengths from 5 to 105). This significantly smooths out price action and reduces false signals. • Universal MA Selection: The engine supports a comprehensive suite of moving average types, including SMA, EMA, WMA, HMA, VWMA, RMA, ZLMA, and ZMA. • Momentum Gradient: The indicator's most unique feature is its visual momentum coloring. The line smoothly transitions from red (bearish momentum) through yellow (neutral/indecision) to green (bullish momentum) based on the real-time ratio of rising vs. falling MAs within the cluster. • Change-Point Signals: A white dot is plotted at the very start of a color change, and a yellow dot is plotted at the end, providing clear signals of potential shifts in momentum. • Multi-Timeframe (MTF) Support: View the Adaptive Nexus Line from any timeframe directly on your current chart (e.g., plot the 4H line on a 15m chart) to get a better perspective of the higher-level trend. • Adaptive Kalman Filter: An optional, switchable Kalman filter is included to provide an additional layer of intelligent, adaptive smoothing to the final output line. Its sensitivity is fully adjustable. ________________________________________ Settings Explained • Moving Average Settings: Control the core engine. Choose your preferred MA Type, the Number of MAs in the cluster, the Start Length, and the Step between lengths. • Time Frame: Set the indicator to a higher timeframe for a broader market view. Leave blank to use your chart's current timeframe. • Kalman Filter Settings: Toggle the Use Kalman Filter on or off. Adjust the Kalman Smoothing Period (higher = smoother) to fine-tune the adaptive smoothing to your preference.
Pine Script® Indikator
von arun_mhetre
Risk-Reward Position SizerRisk-Reward Position Sizer – Features Checklist Purpose: A visual calculator and position sizing tool for day traders, providing realistic risk, stop-loss, take-profit, and reward-to-risk information based on account size and position constraints. Features: Flexible Risk Settings Set risk as a percentage of your account or a fixed dollar amount per trade. Automatically calculates position size based on desired risk and stop distance. Stop Loss Options Stop distance can be defined as a percent of entry price or a fixed price. Automatically adjusts stop distance when position is cash-limited to achieve your target risk. Take Profit Options TP can be defined as a fixed R multiple (e.g., 2R) or fixed absolute price. Cash-Limited Position Handling Optional “Cap Position to Account Size” prevents buying more shares than your cash allows. Shows actual achievable risk if your cash limits position size. Realistic Risk / Reward Calculations Calculates Actual Risk $ based on position size and stop distance. Calculates Projected Win $ based on take profit and position size. Calculates Actual Reward-to-Risk (R:R) ratio using actual stop and TP. Position Metrics Estimated quantity of shares/contracts to buy. Estimated position value. Estimated leverage used relative to account size. Top-Right Table Display Clear, compact table showing: Account size Target risk $ Actual risk $ Stop distance Quantity Position value Take profit and stop-loss prices Projected win $ and % Projected loss % Actual R:R Leverage Trading Decision Aid Gives traders a realistic snapshot of achievable risk and reward before entering a trade. Helps avoid the common trap of setting tight stops that don’t actually match desired account risk. Why It’s Useful: This indicator turns abstract risk/reward concepts into concrete, actionable numbers, helping day traders size positions safely, plan stops and targets realistically, and maintain consistent risk management across trades.
Pine Script® Indikator
von rovangosen
Nifty vs Nifty Fut Premium indicator This indicator compares Nifty Spot and Nifty Futures prices in real-time, displaying the premium (or discount) between them at the top of the pane. Trading applications: Arbitrage opportunities: When the premium becomes unusually high or low compared to fair value (based on cost of carry), traders can exploit the mispricing through cash-futures arbitrage Market sentiment: A rising premium often indicates bullish sentiment as traders are willing to pay more for futures, while a declining or negative premium suggests bearish sentiment Rollover strategy: Near expiry, monitoring the premium helps traders decide optimal timing for rolling positions from current month to next month contracts Risk assessment: Sudden spikes in premium can signal increased demand for leveraged long positions, potentially indicating overbought conditions or strong momentum
Pine Script® Indikator
von manishchaks
Machine Learning Price Predictor: Ridge AR [Bitwardex]🔹Machine Learning Price Predictor: Ridge AR is a research-oriented indicator demonstrating the use of Regularized AutoRegression (Ridge AR) for short-term price forecasting. The model combines autoregressive structure with Ridge regularization , providing stability under noisy or volatile market conditions. The latest version introduces Bull and Bear signals , visually representing the current momentum phase and model direction directly on the chart. Unlike traditional linear regression, Ridge AR minimizes overfitting, stabilizes coefficient dynamics, and enhances predictive consistency in correlated datasets. The script plots: Fit Line — in-sample fitted data; Forecast Line — out-of-sample projection; Trend Segments — color-coded bullish/bearish sections; Bull/Bear Labels 🐂🐻 — dynamic visual signals showing directional bias. Designed for researchers, students, and developers, this tool helps explore regularized time-series forecasting in Pine Script™. 🧩 Ridge AR Settings Training Window — number of bars used for model training; Forecast Horizon — forecast length (bars ahead); AR Order — number of lags used as features; Ridge Strength (λ) — regularization coefficient; Damping Factor — exponential trend decay rate; Trend Length — period for trend/volatility estimation; Momentum Weight — strength of the recent move; Mean Reversion — pullback intensity toward the mean. 🧮 Data Processing Prefilter: None — raw close price; EMA — exponential smoothing; SuperSmoother — Ehlers filter for noise reduction. EMA Length, SuperSmoother Length — smoothing parameters. 🖥️ Display Settings Update Mode: Lock — static model; Update Once Reached — rebuild after forecast horizon; Continuous — update every bar. Forecast Color — projection line color; Bullish/Bearish Colors — colors for trend segments. 🐂🐻 Bull/Bear Signal System The Bull/Bear Signal System adds directional visual cues to highlight local momentum shifts and model-based trend confirmation. Bull (🐂) — appears when upward momentum is confirmed (momentum > 0) . Displayed below the bar, colored with Bullish Color. Bear (🐻) — appears when downward momentum is dominant (momentum < 0) . Displayed above the bar, colored with Bearish Color. Signals are generated during model recalculations or when the directional bias changes in Continuous mode. These visual markers are analytical aids , not trading triggers. 🧠 Core Algorithmic Components Regularized AutoRegression (Ridge AR): Solves: (X′X+λI)−1X′y to derive stable regression coefficients. Matrix and Pseudoinverse Operations — implemented natively in Pine Script™. Prefiltering (EMA / Ehlers SuperSmoother) — stabilizes noisy data. Forecast Dynamics — integrates damping, momentum, and mean reversion. Trend Visualization — color-coded bullish/bearish line segments. Bull/Bear Signal Engine — visualizes real-time impulse direction. 📊 Applications Academic and educational purposes; Demonstration of Ridge Regression and AR models; Analysis of bull/bear market phase transitions; Visualization of time-series dependencies. ⚠️ Disclaimer This script is provided for educational and research purposes only. It does not provide trading or investment advice. The author assumes no liability for financial losses resulting from its use. Use responsibly and at your own risk.
Pine Script® Indikator
von bitwardex
Market Structure ICT Screener [TradingFinder] BoS ChoCh🔵 Introduction Market Structure is the foundation of every Smart Money and ICT based trading model. It describes how price moves through a sequence of highs and lows, forming clear phases of expansion, retracement and reversal. Understanding this structure allows traders to read institutional order flow and align their positions with the true direction of liquidity. Two of the most critical components in Market Structure are the Break of Structure (BOS) and Change of Character (CHOCH). A BOS represents trend continuation, confirming strength within the current direction. In contrast, CHOCH also known as a Market Structure Shift (MSS) signals the first sign of a trend reversal or liquidity shift where order flow begins to change from bullish to bearish or vice versa. Because the market is fractal, structure can exist at multiple levels known as Major (External) and Minor (Internal). Major structure defines the overall trend on higher timeframes while minor or internal structure reveals short term swings and early reversals within that larger move. 🔵 How to Use Understanding Market Structure starts with identifying how price interacts with previous swing highs and swing lows. Every trend in the market, whether bullish or bearish, is built from a sequence of impulsive and corrective moves. Impulsive legs show strong displacement in the direction of liquidity flow, while corrective legs represent temporary pullbacks as the market rebalances before the next expansion. Recognizing these sequences is essential for reading the story of price and anticipating what may happen next. A Break of Structure (BOS) occurs when price decisively moves beyond a previous structural point by breaking above the last high in an uptrend or falling below the last low in a downtrend. This event confirms that the current trend remains intact and that liquidity has been successfully taken from one side of the market. A BOS acts as confirmation of continuation and reflects strength within the existing directional bias. A Change of Character (CHOCH) appears when price violates structure in the opposite direction of the prevailing trend. This is the first signal that market sentiment and order flow may be shifting. For example, during a downtrend if price breaks above a previous high, it indicates that sellers are losing control and a potential bullish reversal may be developing. In an uptrend, when price drops below a recent low, it suggests a possible bearish transition. Because the market is fractal, structure exists across multiple layers. Major structure reflects the dominant movement visible on higher timeframes and defines the broader directional bias. Minor or internal structure represents smaller swings within that move and helps identify early transitions before they appear on the higher timeframe. When internal and external structures align, they offer a high probability signal for trend continuation or reversal. By observing BOS and CHOCH across both internal and external structures, traders can clearly visualize when the market is expanding, contracting or preparing to shift direction. This structured understanding of price movement forms the foundation for precise trend analysis and high quality decision making in any Smart Money or ICT based trading approach. 🔵 Settings 🟣 Display Settings Table on Chart : Allows users to choose the position of the signal dashboard either directly on the chart or below it, depending on their layout preference. Number of Symbols : Enables users to control how many symbols are displayed in the screener table, from 10 to 20, adjustable in increments of 2 symbols for flexible screening depth. Table Mode : This setting offers two layout styles for the signal table : Basic : Mode displays symbols in a single column, using more vertical space. Extended : Mode arranges symbols in pairs side-by-side, optimizing screen space with a more compact view. Table Size : Lets you adjust the table’s visual size with options such as: auto, tiny, small, normal, large, huge. Table Position : Sets the screen location of the table. Choose from 9 possible positions, combining vertical (top, middle, bottom) and horizontal (left, center, right) alignments. 🟣 Symbol Settings Each of the 20 symbol slots comes with a full set of customizable parameters : Symbol : Define or select the asset (e.g., XAUUSD, BTCUSD, EURUSD, etc.). Timeframe : Set your desired timeframe for each symbol (e.g., 15, 60, 240, 1D). Pivot Period : Set the length used to detect swing highs and lows. Shorter values increase sensitivity, longer ones focus on major structures. 🔵 Conclusion Mastering Market Structure and understanding the relationship between BOS and CHOCH allows traders to see the market with greater clarity and confidence. These two elements reveal how liquidity moves through different phases of expansion and retracement and how institutional order flow shifts between accumulation and distribution. By analyzing both internal and external structures, traders can align short term and long term perspectives and anticipate where price is most likely to react. The ability to read these structural shifts helps identify continuation points, reversals and areas where liquidity is engineered or collected. Incorporating Market Structure into a consistent trading process transforms the way a trader views the chart. Instead of reacting to random movements, each swing, break and shift becomes part of a logical framework that reflects the true behavior of the market. Understanding BOS and CHOCH is not just a concept but a complete language of price that guides every professional decision in Smart Money and ICT based trading.
Pine Script® Indikator
von TFlab
8
Custom Text Display📋 Custom Text Display - User Guide Overview This indicator allows you to display custom text anywhere on your TradingView chart with full control over appearance and positioning. Features 📝 Text Settings Custom Text: Write any text you want to display on your chart. Can be multiple lines. Text Alignment: Choose how your text is aligned within the box Left Center Right Text Color: Pick any color for your text Background Color: Choose the background color of the text box (includes transparency control) Text Size: Select from 5 different text sizes Tiny Small Normal Large Huge 📍 Position Settings Table Position: Choose where the text box appears on your chart Top Left Top Center Top Right Bottom Left Bottom Center Bottom Right Vertical Offset (0-20): Fine-tune the vertical position 0 = Default position (no offset) Higher values = Move the text box further down Use this to avoid overlapping with other indicators or chart elements How to Use Add the indicator to your TradingView chart Open the settings by clicking the gear icon next to the indicator name Enter your text in the "Custom Text" field Customize appearance: Choose your preferred colors for text and background Select text size and alignment Position the box: Select one of the 6 main positions Use "Vertical Offset" to fine-tune the exact position (add empty space above the text) Click OK to apply changes Use Cases 📊 Display trading notes or reminders 📈 Show key levels or targets 💡 Add strategy descriptions ⚠️ Display risk warnings 📝 Create custom labels for specific chart setups 🎯 Mark important price zones with descriptions Tips Use transparent backgrounds (adjust the transparency slider) for a cleaner look Vertical Offset is useful when you have multiple indicators at the top/bottom and need to avoid overlap Large/Huge text works well for important notes you want to see at a glance Combine different text alignments with different positions for better layout control Note: The text box updates in real-time as you change settings, so you can preview your changes before applying them.
Pine Script® Indikator
von kobiko3030
2
Adaptive Square Levels (Prev + Curr Month, Configurable) The Adaptive Square Levels (Configurable Edition) indicator dynamically plots price levels based on perfect squares — a concept derived from harmonic market behavior and geometric scaling. Each month, the script automatically detects the new monthly open and generates square levels both above and below the opening price. This version introduces full configurability, allowing traders to adjust how many square levels they want to visualize on either side of the base level. The indicator also visually separates previous and current month levels for easy reference. ⚙️ Features 🔢 User-Configurable Range: Choose how many levels to plot above and below the base level. 🧮 Mathematically Derived Levels: Based on perfect squares up to a user-defined max price. 📅 Monthly Auto-Reset: Automatically refreshes at the start of each new month. 🎨 Color-Coded Levels: Orange → Major levels (square roots divisible by 3) Yellow → Regular levels Star (★) → Base level (nearest to monthly open) 🕰️ Dual Month Display: Shows both current and previous month levels for trend comparison. 💡 How to Use Add the indicator to any symbol and timeframe (preferably daily or higher). Adjust: Max Price Level → The upper bound of your price universe. Number of Levels Each Side → Controls the density of levels. Observe how price reacts around these mathematically significant zones. Use in confluence with your own price action, volume, or support/resistance analysis. 📊 Ideal For Swing traders analyzing monthly trend reversals Price structure and geometry enthusiasts Traders exploring market harmonics or square-of-nine–based frameworks 🧠 Note The script doesn’t provide buy/sell signals — it offers a structural map of key levels derived from square relationships. Use it as a visual guide to align entries and exits with natural market geometry.
Pine Script® Indikator
von civiljeeva
1
15-Min RSI Scalper [SwissAlgo]15-Min RSI Scalper Tracks RSI Momentum Loss and Gain to Generate Signals ------------------------------------------------------- WHAT THIS INDICATOR CALCULATES This indicator attempts to identify RSI directional changes (RSI momentum) using a step-by-step "ladder" method. It reads RSI(14) from the next higher timeframe relative to your chart. On a 15-minute chart, it uses 1-hour RSI. On a 5-minute chart, it uses 15-minute RSI, and so on. How the ladder logic works: The indicator doesn't track RSI all the time. It only starts tracking when RSI crosses into potentially extreme territory (these are called "events" in the code): For sell signals : when RSI crosses above a dynamic upper threshold (typically between 60-80, calculated as the 90th percentile of recent RSI) For buy signals : when RSI crosses below a dynamic lower threshold (typically between 20-40, calculated as the 10th percentile of recent RSI) Once tracking begins, RSI movement is divided into 2-point steps (boxes). The indicator counts how many boxes RSI climbs or falls. A signal generates only when: RSI reverses direction by at least 2 boxes (4 RSI points) from its extreme RSI holds that reversal for 3 consecutive confirmed bars Example: Dynamic threshold is at 68. RSI crosses above 68 → tracking starts. RSI climbs to 76 (4 boxes up). Then it drops back to 72 and stays below that level for 3 bars → sell signal prints. The buy signal works the same way in reverse. ------------------------------------------------------- SIGNAL GENERATION METHODOLOGY Sell Signal (Red Triangle) RSI crosses above a dynamic start level (calculated as the 90th percentile of the last 1000 bars, constrained between 60-80) Indicator tracks upward progression in 2-point boxes RSI reverses and drops below a boundary 2 boxes below the highest box reached RSI remains below that boundary for 3 confirmed bars Red triangle plots above price Reset condition: RSI returns below 50 Buy Signal (Green Triangle) RSI crosses below a dynamic start level (10th percentile of last 1000 bars, constrained between 20-40) Indicator tracks downward progression in 2-point boxes RSI reverses and rises above a boundary 2 boxes above the lowest box reached RSI remains above that boundary for 3 confirmed bars Green triangle plots below price Reset condition: RSI returns above 50 ------------------------------------------------------- TECHNICAL PARAMETERS All parameters are hardcoded: RSI Period: 14 Box Size: 2 RSI points Reversal Threshold: 2 boxes (4 RSI points) Confirmation Period: 3 bars Reset Level: RSI 50 Sell Start Range: 60-80 (dynamic) Buy Start Range: 20-40 (dynamic) Lookback for Percentile: 1000 bars Note: Since the code is open source, users can modify these hardcoded values directly in the script to adjust sensitivity. For example, increasing the confirmation period from 3 to 5 bars will produce fewer but more conservative signals. Decreasing the box size from 2 to 1 will make the indicator more responsive to smaller RSI movements. ------------------------------------------------------- KEY FEATURES Automatic Higher Timeframe RSI When applied to a 15-minute chart, the indicator automatically reads 1-hour RSI data. This is the next standard timeframe above 15 minutes in the indicator's logic. Dynamic Adaptive Start Levels Sell signals use the 90th percentile of RSI over the last 1000 bars, constrained between 60-80. Buy signals use the 10th percentile, constrained between 20-40. These thresholds recalculate on each bar based on recent data. Ladder Box System RSI movements are tracked in 2-point boxes. The indicator requires a 2-box reversal followed by 3 consecutive bars maintaining that reversal before generating a signal. Dual Signal Output Red down-triangles plot above price when the sell signal conditions are met. Green up-triangles plot below the price when buy signal conditions are met. ------------------------------------------------------- REPAINTING This indicator does not repaint. All calculations use "barstate.isconfirmed" to ensure signals appear only on closed bars. The request.security() call uses lookahead=barmerge.lookahead_off to prevent forward-looking bias. ------------------------------------------------------- INTENDED CHART TIMEFRAME This indicator is designed for use on 15-minute charts. The visual reminder table at the top of the chart indicates this requirement. On a 15-minute chart: RSI data comes from the 1-hour timeframe Signals reflect 1-hour momentum shifts 3-bar confirmation equals 45 minutes of price action Using it on other timeframes will change the higher timeframe RSI source and may produce different behavior. ------------------------------------------------------- WHAT THIS INDICATOR DOES NOT DO Does not predict future price movements Does not provide entry or exit advice Does not guarantee profitable trades Does not replace comprehensive technical analysis Does not account for fundamental factors, news events, or market structure Does not adapt to all market conditions equally ------------------------------------------------------- EDUCATIONAL USE This indicator demonstrates one approach to momentum reversal detection using: Multi-timeframe analysis Adaptive thresholds via percentile calculation Step-wise momentum tracking Multi-bar confirmation logic It is designed as a technical study, not a trading system. Signals represent calculated conditions based on RSI behavior, not trade recommendations. Always do your own analysis before taking market positions. ------------------------------------------------------- RISK DISCLOSURE Trading involves substantial risk of loss. This indicator: Is for educational and informational purposes only Does not constitute financial, investment, or trading advice Should not be used as the sole basis for trading decisions Has not been tested across all market conditions May produce false signals, late signals, or no signals in certain conditions Past performance of any indicator does not predict future results. Users must conduct their own analysis and risk assessment before making trading decisions. Always use proper risk management, including stop losses and position sizing appropriate to your account and risk tolerance. MIT LICENSE This code is open source and provided as-is without warranties of any kind. You may use, modify, and distribute it freely under the MIT License.
Pine Script® Indikator
von SwissAlgo
Algo Trading Signals - Buy/Sell System# 📊 Algo Trading Signals - Dynamic Buy/Sell System ## 🎯 Overview **Algo Trading Signals** is a sophisticated intraday trading indicator designed for algorithmic traders and active day traders. This system generates precise buy and sell signals based on a dynamic box breakout strategy with intelligent position management, add-on entries, and automatic target adjustment. The indicator creates a reference price box during a specified time window (default: 9:15 AM - 9:45 AM IST) and generates high-probability signals when price breaks out of this range with confirmation. --- ## ✨ Key Features ### 📍 **Smart Signal Generation** - **Primary Entry Signals**: Clear buy/sell signals on confirmed breakouts above/below the reference box - **Confirmation Bars**: Reduces false signals by requiring multiple bar confirmation before entry - **Cooldown System**: Prevents overtrading with configurable cooldown periods between trades - **Add-On Positions**: Automatically identifies optimal pullback entries for scaling into positions ### 📦 **Dynamic Reference Box** - Creates a high/low range during your chosen time window - Automatically updates after each successful trade - Visual box display with color-coded boundaries (red=resistance, green=support) - Mid-level reference line for market structure analysis ### 🎯 **Intelligent Position Management** - **Automatic Target Calculation**: Sets profit targets based on average move distance - **Add-On System**: Up to 3 additional entries on optimal pullbacks - **Position Tracking**: Monitors active trades and remaining add-on capacity - **Auto Box Shift**: Adjusts reference box after target hits for continued trading ### 📊 **Visual Clarity** - **Color-Coded Labels**: - 🟢 Green for BUY signals - 🔴 Red for SELL signals - 🔵 Blue for ADD-ON buys - 🟠 Orange for ADD-ON sells - ✓ Yellow for Target hits - **TP Level Lines**: Dotted lines showing current profit targets - **Hover Tooltips**: Detailed information on entry prices, targets, and add-on numbers ### 📈 **Real-Time Statistics** Live performance dashboard showing: - Total buy and sell signals generated - Number of add-on positions taken - Take profit hits achieved - Current trade status (LONG/SHORT/None) - Cooldown timer status ### 🔔 **Comprehensive Alerts** Built-in alert conditions for: - Primary buy entry signals - Primary sell entry signals - Add-on buy positions - Add-on sell positions - Buy take profit hits - Sell take profit hits --- ## 🛠️ Configuration Options ### **Time Settings** - **Box Start Hour/Minute**: Define when to begin tracking the reference range - **Box End Hour/Minute**: Define when to lock the reference box - **Default**: 9:15 AM - 9:45 AM (IST) - Perfect for Indian market opening range ### **Trade Settings** - **Target Points (TP)**: Average move distance for profit targets (default: 40 points) - **Breakout Confirmation Bars**: Number of bars to confirm breakout (default: 2) - **Cooldown After Trade**: Bars to wait after closing position (default: 3) - **Add-On Distance Points**: Minimum pullback for add-on entry (default: 40 points) - **Max Add-On Positions**: Maximum additional positions allowed (default: 3) ### **Display Options** - Toggle buy/sell signal labels - Show/hide trading box visualization - Show/hide TP level lines - Show/hide statistics table --- ## 💡 How It Works ### **Phase 1: Box Formation (9:15 AM - 9:45 AM)** The indicator tracks the high and low prices during your specified time window to create a reference box representing the opening range. ### **Phase 2: Breakout Detection** After the box is locked, the system monitors for: - **Bullish Breakout**: Price closes above box high for confirmation bars - **Bearish Breakout**: Price closes below box low for confirmation bars ### **Phase 3: Signal Generation** When confirmation requirements are met: - Entry signal is generated with clear visual label - Target price is calculated (Entry ± Target Points) - Position tracking activates - Cooldown timer starts ### **Phase 4: Position Management** During active trade: - **Add-On Logic**: If price pulls back by specified distance but stays within favorable range, additional entry signal fires - **Target Monitoring**: Continuously checks if price reaches TP level - **Box Adjustment**: After TP hit, box automatically shifts to new range for next opportunity ### **Phase 5: Trade Exit & Reset** On target hit: - Position closes with TP marker - Statistics update - Box repositions for next setup - Cooldown activates - System ready for next signal --- ## 📌 Best Use Cases ### **Ideal For:** - ✅ Intraday breakout trading strategies - ✅ Algorithmic trading systems (via alerts/webhooks) - ✅ Opening range breakout (ORB) strategies - ✅ Index futures (Nifty, Bank Nifty, Sensex) - ✅ High-liquidity stocks with clear ranges - ✅ Automated trading bots - ✅ Scalping and day trading ### **Markets:** - Indian Stock Market (NSE/BSE) - Futures & Options - Forex pairs - Cryptocurrency (adjust timing for 24/7 markets) - Global indices --- ## ⚙️ Integration with Algo Trading This indicator is **algo-ready** and can be integrated with automated trading systems: 1. **TradingView Alerts**: Set up alert conditions for each signal type 2. **Webhook Integration**: Connect alerts to trading platforms via webhooks 3. **API Automation**: Use with brokers supporting TradingView integration (Zerodha, Upstox, Interactive Brokers, etc.) 4. **Signal Data Access**: All signals are plotted for external data retrieval --- ## 📖 Quick Start Guide 1. **Add Indicator**: Apply to your chart (works best on 1-5 minute timeframes) 2. **Configure Time Window**: Set your desired box formation period 3. **Adjust Parameters**: Tune confirmation bars, targets, and add-on settings to your trading style 4. **Set Alerts**: Create alert conditions for automated notifications 5. **Backtest**: Review historical signals to validate strategy performance 6. **Go Live**: Enable alerts and start receiving real-time trading signals --- ## ⚠️ Risk Disclaimer This indicator is a **tool for analysis** and does not guarantee profits. Trading involves substantial risk of loss. Always: - Use proper position sizing - Implement stop losses (not included in this indicator) - Test thoroughly before live trading - Understand market conditions - Never risk more than you can afford to lose - Consider your risk tolerance and trading experience **Past performance does not indicate future results.** ## 🔄 Version History **v1.0** - Initial Release - Dynamic box formation system - Confirmed breakout signals - Add-on position management - Visual signal labels and statistics - Comprehensive alert system - Auto-adjusting target boxes --- ## 📞 Support & Feedback If you find this indicator helpful: - ⭐ Please leave a like/favorite - 💬 Share your feedback in comments - 📊 Share your results and improvements - 🤝 Suggest features for future updates --- ## 🏷️ Tags `breakout` `daytrading` `signals` `algo` `automated` `intraday` `ORB` `opening-range` `buy-sell` `scalping` `futures` `nifty` `banknifty` `algorithmic` `box-strategy` *Remember: The best indicator is combined with proper risk management and trading discipline.* Use it at your own rist, not as financial advie
Pine Script® Indikator
von vkpk1401
Cnagda Pure Price ActionCnagda Pure Price Action (CPPA) indicator is a pure price action-based system designed to provide traders with real-time, dynamic analysis of the market. It automatically identifies key candles, support and resistance zones, and potential buy/sell signals by combining price, volume, and multiple popular trend indicators. How Price Action & Volume Analysis Works Silver Zone – Logic, Reason, and Trade Planning Logic & Visualization: The Silver Zone is created when the closing price is the lowest in the chosen window and volume is the highest in that window. Visually, a large silver-colored box/rectangle appears on the chart. Thick horizontal lines (top and bottom) are drawn at the high and low of that candle/bar, extending to the right. Reasoning: This combination typically occurs at strong “accumulation” or support areas: Sellers push the price down to the lowest point, but aggressive buyers step in with high volume, absorbing supply. Indicates potential exhaustion of selling and likely shift in market control to buyers. How to Plan Trades Using Silver Zone: Watch if price returns to the Silver Zone in the future: It often acts as powerful support. Bullish entries (buys) can be planned when price tests or slightly pierces this zone, especially if new buy signals occur (like yellow/green candle labels). Place your stop-loss below the bottom line of the Silver Zone. Target: Look for the nearest resistance or opposing zone, or use indicator’s bullish label as confirmation. Extra Tip: Multiple touches of the Silver Zone reinforce its importance, but if price closes deeply below it with high volume, that’s a caution signal—support may be breaking. Black Zone – Logic, Reason, and Trade Planning (as CPPA): Logic & Visualization: The Black Zone is created when the closing price is the highest in the chosen window and volume is the lowest in that window. Visually, a large black-colored box/rectangle appears on the chart, along with thick horizontal lines at the top (high) and bottom (low) of the candle, extending to the right. Reasoning: This combination signals a strong “distribution” or resistance area: Buyers push the price up to a local high, but low volume means there is not much follow-through or conviction in the move. Often marks exhaustion where uptrend may pause or reverse, as sellers can soon step in. How to Plan Trades Using Black Zone: If price revisits the Black Zone in the future, it often acts as major resistance. Bearish entries (sells) are considered when price is near, testing, or slightly above the Black Zone—especially if new sell signals appear (like blue/red candle labels). Place your stop-loss just above the top line of the Black Zone. Target: Nearest support zone (such as a Silver Zone) or next indicator’s bearish label. Extra Tip: Multiple touches of the Black Zone make it stronger, but if price closes far above with rising volume, be cautious—resistance might be breaking. Support Line – Logic, Reason, and Trade Planning (as Cppa): Logic & Visualization: The Support Line is a dynamically drawn dashed line (usually blue) that marks key price levels where the market has previously shown significant buying interest. The line is generated whenever a candle forms a high price with high volume (orange logic). The script checks for historical pivot lows, past support zones, and even higher timeframe (HTF) supports, and then extends a blue dashed line from that price level to the right, labeling it (sometimes as “Prev Support Orange, HTF”). Reasoning: This line helps you visually identify where demand has been strong enough to hold price from falling further—essentially a floor in the market used by professional traders. If price approaches or re-tests this line, there’s a good chance buyers will defend it again. How to Plan Trades Using Support Line: Watch for price to approach the Support Line during down moves. If you see a bullish candlestick pattern, buy labels (yellow/green), or other indicators aligning, this can be a high-probability entry zone. Great for planning stop-loss for long trades: place stops just below this line. Target: Next resistance zone, Black Zone, or the top of the last swing. Extra Tip: Multiple confirmations (support line + Silver Zone + bullish label) provide powerful entry signals. If price closes strongly below the Support Line with volume, be cautious—support may be breaking, and a trend reversal or deeper correction could follow. Resistance Line – Logic, Reason, and Trade Planning (from CPPA): Logic & Visualization: The Resistance Line is a dynamically drawn dashed line (usually purple or red) that identifies price levels where the market has previously faced significant selling pressure. This line is created when a candle reaches a high price combined with high volume (orange logic), or from a historical pivot high/resistance, The script also tracks higher timeframe (HTF) resistance lines, labeled as “Prev Resistance Orange, HTF,” and extends these dashed lines to the right across the chart. Reasoning: Resistance Lines are visual markers of “supply zones,” where buyers previously failed, and sellers took control. If the price returns to this line later, sellers may get active again to defend this level, halting the uptrend. How to Plan Trades Using Resistance Line: Watch for price to approach the Resistance Line during up moves. If you see bearish candlestick patterns, sell labels (blue/red), or bearish indicator confirmation, this becomes a strong shorting opportunity. Perfect for placing stop-loss in short trades—put your stop just above the Resistance Line. Target: Next support zone (Silver Zone) or bottom of the last swing. If the price breaks above with high volume, avoid shorting—resistance may be failing. Extra Tip: Multiple resistances (Resistance Line + Black Zone + bearish label) make short signals stronger. Choppy movement around this line often signals indecision; wait for a clear rejection before entering trades. Bullish / Bearish Label – Logic, Reason, and Trade Planning: Logic & Visualization: The indicator constantly calculates a "Bull Score" and a "Bear Score" based on several factors: Trend direction from price slope Confirmation by popular indicators (RSI, ADX, SAR, CMF, OBV, CCI, Bollinger Bands, TWAP) Adaptive scoring (higher score for each bullish/bearish condition met) If Bull Score > Bear Score, the chart displays a green "BULLISH" label (usually below the bar). If Bear Score > Bull Score, the chart displays a red "BEARISH" label (usually above the bar). If neither dominates, a "NEUTRAL" label appears. Reasoning: The labels summarize complex price action and indicator analysis into a simple, actionable sentiment cue: Bullish: Majority of conditions indicate buying strength; trend is up. Bearish: Majority signals show selling pressure; trend is down. How to Use in Trade Planning: Use the Bullish label as confirmation to enter or hold long (buy) positions, especially if near support/Silver Zone. Use the Bearish label to enter/hold short (sell) positions, especially if near resistance/Black Zone. For best results, combine with candle color, volume analysis, or other labels (yellow/green for buys, blue/red for sells). Avoid trading against these labels unless you have strong confluence from zones/support levels. Yellow Label (Buy Signal) – Logic, Reason & Trade Planning: Logic & Visualization: The yellow label appears below a candle (label.style_label_up, yloc.belowbar) and marks a potential buy signal. Script conditions: The candle must be a “yellow candle” (which means it’s at the local lowest close, not a high, with normal volume). Volume is decreasing for 2 consecutive candles (current volume < previous volume, previous volume < second previous). When these conditions are met, a yellow label is plotted below the candle. Reasoning: This scenario often marks the end of selling pressure and start of possible accumulation—buyers may be stepping in as sellers exhaust. Decreasing volume during a local price low means selling is slowing, possibly hinting at a reversal. How to Trade Using Yellow Label: Entry: Consider buying at/just above the yellow-labeled candle’s close. Stop-loss: A bit below the candle’s low (or Silver Zone line, if present). Target: Next resistance level, Black Zone, or chart’s bullish label. Extra Tip: If the yellow label is found at/near a Silver Zone or Support Line, and trend is “Bullish,” the setup gets even stronger. Avoid trading if overall indicator shows “Bearish.” Green Label (Buy with Increasing Volume) – Logic, Reason & Trade Planning: Logic & Visualization: The green label is plotted below a candle (label.style_label_up, yloc.belowbar) and marks a strong buy signal. Script conditions: The candle must be a “yellow candle” (at the local lowest close, normal volume). Volume is increasing for 2 consecutive candles (current volume > previous volume, previous volume > second previous). When these conditions are met, a green label is plotted below the candle. Reasoning: This scenario signals that buyers are stepping in aggressively at a local price low—the end of a downtrend with strong, rising activity. Increasing volume at a price low is a classic sign of accumulation, where institutions or large players may be buying. How to Trade Using Green Label: Entry: Consider buying at/just above the green-labeled candle’s close for a momentum-based reversal. Stop-loss: Slightly below the candle’s low, or the Silver Zone/support line if present. Target: Nearest resistance zone/Black Zone, indicator’s bullish label, or next swing high. Extra Tip: If the green label is near other supports (Silver Zone, Support Line), the setup is extra strong. Use confirmation from Bullish labels or trend signals for best results. Green label setups are suitable for quick, high momentum trades due to increasing volume Blue Label (Sell Signal on Decreasing Volume) – Logic, Reason & Trade Planning: Logic & Visualization: The blue label is plotted above a candle (label.style_label_down, yloc.abovebar) as a potential sell signal. Script conditions: The candle is a “blue candle” (local highest close, but not also lowest, and volume is neither highest nor lowest). Volume is decreasing over 2 consecutive candles (current volume < previous, previous < two ago). When these match, a blue label appears above the candle. Reasoning: This typically signals buyer exhaustion at a local high: price has gone up, but volume is dropping, suggesting big players may not be buying any more at these levels. The trend is losing strength, and a reversal or pullback is likely. How to Trade Using Blue Label: Entry: Look to sell at/just below the candle with the blue label. Stop-loss: Just above the candle’s high (or above the Black Zone/resistance if present). Target: Nearest support, Silver Zone, or a swing low. Extra Tip: Blue label signals are stronger if they appear near Black Zones or Resistance Lines, or when the general market label is "Bearish." As with buy setups, always check for confirmation from trend or volume before trading aggressively. Blue Label (Sell Signal on Decreasing Volume) – Logic, Reason & Trade Planning: Logic & Visualization: The blue label is plotted above a candle (label.style_label_down, yloc.abovebar) as a potential sell signal. Script conditions: The candle is a “blue candle” (local highest close, but not also lowest, and volume is neither highest nor lowest). Volume is decreasing over 2 consecutive candles (current volume < previous, previous < two ago). When these match, a blue label appears above the candle. Reasoning: This typically signals buyer exhaustion at a local high: price has gone up, but volume is dropping, suggesting big players may not be buying any more at these levels. The trend is losing strength, and a reversal or pullback is likely. How to Trade Using Blue Label: Entry: Look to sell at/just below the candle with the blue label. Stop-loss: Just above the candle’s high (or above the Black Zone/resistance if present). Target: Nearest support, Silver Zone, or a swing low. Extra Tip: Blue label signals are stronger if they appear near Black Zones or Resistance Lines, or when the general market label is "Bearish." As with buy setups, always check for confirmation from trend or volume before trading aggressively. Here’s a summary of all key chart labels, zones, and trading logic of your Price Action script: Silver Zone: Powerful support zone. Created at lowest close + highest volume. Best for buy entries near its lines. Black Zone: Strong resistance zone. Created at highest close + lowest volume. Ideal for short trades near its levels. Support Line: Blue dashed line at historical demand; buyers defend here. Look for bullish setups when price approaches. Resistance Line: Purple/red dashed line at supply; sellers defend here. Great for bearish setups when price nears. Bullish/Bearish Labels: Summarize trend direction using price action + multiple indicator confirmations. Plan buys, holds on bullish; sells, shorts on bearish. Yellow Label: Buy signal on decreasing volume and local price low. Entry above candle, stop below, target next resistance. Green Label: Strong buy on increasing volume at a price low. Entry for momentum trade, stop below, target next zone. Blue Label: Sell signal on dropping volume and local price high. Entry below candle, stop above, target next support. Best Practices: Always combine zone/label signals for higher probability trades. Use stop-loss near zones/lines for risk management. Prefer trading in the trend direction (bullish/bearish label agrees with your entry). if Any Question, Suggestion Feel free to ask Disclaimer: All information provided by this indicator is for educational and analysis purposes only, and should not be considered financial advice.
Pine Script® Indikator
von cnagda3
11
Market Structure (BOS on Break, HH/HL/LH/LL)Market Structure (BOS on Break, HH/HL/LH/LL) is a clean and reactive market structure tool designed for traders who want clear visual feedback of trend direction and structure changes. It automatically identifies: Higher Highs (HH) Higher Lows (HL) Lower Highs (LH) Lower Lows (LL) Breaks of Structure (BOS) when price breaches previous swing levels. ✳️ Features Automatic Structure Detection: Detects swing highs/lows based on your left/right pivot settings. Break of Structure Alerts: Instantly updates bias when price breaks a previous swing level (no delay). Real-Time BOS Response: Structure flips as soon as price takes out the previous high or low. Color-Coded Bars: Bars can auto-paint white for bullish and black for bearish conditions. Optional Fading Dots: Visual fading dots track trend duration and strength for quick bias reading. Customizable Pivots: Choose how many bars to use for left/right swing confirmation. Alerts: Fully configured for HH, HL, LH, LL, BOS Up, and BOS Down events. ⚙️ Inputs Left Pivot Bars / Right Pivot Bars: Control how many candles define a valid swing point. Paint Bars by Trend: Toggle bar coloring to match bullish or bearish bias. Show Fading Trend Dots: Add fading dots that shrink and fade as a trend matures. 🔔 Alerts Break of Structure Up / Down Higher High (HH) confirmed Higher Low (HL) confirmed Lower High (LH) confirmed Lower Low (LL) confirmed 🎯 Use Case Perfect for: Price action traders Smart money concept (SMC) practitioners Trend structure analysts Scalpers and swing traders looking for quick structure flips. 🧠 Notes Works on any timeframe and any instrument. BOS signals update immediately when price breaks structure (no lag). For additional BOS markers, you can uncomment the last few lines in the script to show arrows when structure breaks.
Pine Script® Indikator
von Bmaloney
3
TokMaz – Signal Plain🧭 Overview A clean, lightweight, and non-repainting directional signal indicator built for serious traders. This version is fully optimized and locked to ensure stable performance and consistent signal output. ⚙️ Features 1. Designed to follow price precisely (no delay or offset). 2. Non-repainting structure — all signals confirmed on bar close. 3. Automatic Buy/Sell/Rejection alerts ready for webhook or automation use. 4. Minimal visual design — clear lines, direct chart attachment, no background clutter. 5. Integrated trend reference line (SMA200) for long-term view. 💡 Signal Display:- 🔵 BUY Solid – Bullish directional setup 🔴 SELL Solid – Bearish directional setup ⚪ REJ→BUY / REJ→SELL – Potential rejection or reversal zones All signals appear directly on candles for instant readability and execution timing. 📢 Alerts:- ✅ BUY Solid ✅ SELL Solid ⚡ REJ→BUY ⚡ REJ→SELL Works seamlessly with TradingView notifications or external automation. 📈 Style:- EMA50 (dynamic price reference) SMA200 (trend backbone) Clean, professional visual — perfect for live trading or educational setups.
Pine Script® Indikator
von tokmaz
Smooth Cloud + ZigZag VPOC CORE v6📌 Description The Smooth Cloud + ZigZag VPOC indicator is designed to help traders visualize market structure and potential confluence zones. Smooth Cloud: Built from smoothed moving averages (EMA, RMA, or HMA), this cloud highlights the underlying short-term trend by shading bullish and bearish phases. Pivots (ZigZag style): Marks confirmed swing highs and lows, helping to identify support/resistance and breakout areas without repainting. VPOC (Volume Point of Control): Plots the price level with the highest traded volume, either from a rolling lookback or anchored to a custom date. This often acts as a magnet or reaction level. ATR Bands: Optional dynamic bands based on volatility to frame potential extension zones. Signals & Alerts: Generates long/short labels when price breaks pivot levels in line with trend filters, with optional confluence from HTF trend, VPOC, and ATR. This tool combines trend context, structure, and volume confluence in a single view to support decision-making. ✅ Notes This script is intended for technical analysis and educational use only. It does not provide financial advice or guaranteed outcomes. Signals are purely analytical and should be combined with independent risk management.
Pine Script® Indikator
von Jaxon007