Auf geht's

Zyklen

SUMA VuManChu Cipher B Revised to V6// This indicator is an updated version of the original WuManChu Cipher B indicator, I updated it to v6 and fixed a few things that were no longer supported in v6 from the original v3 or v4. // I also made the RSI and Stoch to fully comedown to the bottom of the display panel to reflect what the rest of the parameters are doing, I adjusted the money flow to be more sensitive. // I tried to leave the logic as it was original intended to be used, // I renamed and put everything together, it was a bit challenging but Cipher B is such a great indicator that I think it deserved the update and the time I put into it.
Pine Script® Indikator
von Tulip-Bullrun
MTF Confluence Reporter - Trend & Momentum AlignmentThis indicator is a multi-timeframe confluence dashboard designed to answer one question clearly: “Across my key timeframes, is the market leaning Bullish, Bearish, or Mixed—and how strong is that lean?” It combines two separate “votes” per timeframe: 4MA Direction (trend alignment / slope bias) StochRSI State (momentum bias) Those votes are then blended into a single Confluence result, shown as a clean readout with a 0–100 Strength score, plus hysteresis to reduce flicker near the decision boundary. What you see in the table 1) 4MA This is the trend component. It summarizes whether the selected timeframes are generally Bull or Bear based on the moving-average direction logic (your 4MA engine). 2) Stoch This is the momentum component. It summarizes whether StochRSI across the selected timeframes is leaning Bull or Bear. 3) Qualified (YES/NO) A safety gate. “Qualified = YES” means the internal conditions required for a valid confluence read are met (i.e., enough alignment/consistency to treat the output as actionable). If it’s NO, treat the market as mixed / transitional and tighten risk. 4) Strength (0–100) Your blended score (trend + momentum). Higher = stronger agreement across timeframes. A simple way to interpret it: 80–100: Strong alignment (clean regime) 60–79: Moderate alignment (tradable, but expect chop) 50–59: Weak / transitioning (be cautious) < 50: Bearish side of the regime logic (or mixed turning down) 5) Strength Bar A visual “battery meter” for the Strength score. This is meant to be read at a glance during fast decision-making. 6) Confluence (BULL/BEAR) The actual regime output. This is the “final answer” based on the Strength score and hysteresis rules. 7) Hysteresis (Enter / Exit thresholds) This is the anti-flicker system. Example shown on the chart: Enter > 60 Exit < 50 Meaning: The script only “flips ON” a Bull regime when strength becomes convincingly Bullish (above 60). It won’t “flip OFF” until strength meaningfully weakens (below 50). This reduces rapid flipping during 50/50 conditions. How to use it (practical workflow) Step 1 — Use Confluence as your “market mode” BULL: Favor longs, trend-following entries, buying pullbacks. BEAR: Favor defense, shorts/hedges (if you trade them), or wait for reset. Qualified = NO: Reduce size, tighten stops, or wait—conditions are not clean. Step 2 — Use Strength to time aggressiveness Strength rising: Momentum is joining trend → entries tend to have better follow-through. Strength falling: Alignment is fading → take profit quicker or tighten risk. Step 3 — Use hysteresis as your “noise filter” If you’re a swing trader, hysteresis is your friend: Don’t overreact to a single bar change. Let the regime confirm and stay confirmed. Best use-cases Swing trading / position bias (daily/weekly context) Hedge decisions (when alignment flips and stays flipped) Filtering entries from other tools (only take signals that match the regime) Settings notes: This script is designed to be flexible: You can choose which timeframes matter most to you (commonly 1H / 4H / 1D / 1W / 1M). If your version includes weighting, you can tune weights to match your trading style (short-term vs swing). Thresholds (Enter/Exit) can be tightened for faster flips or widened for smoother regimes. Important notes / disclaimer (TradingView-safe) This tool is an informational confluence dashboard, not financial advice. No indicator can predict the future. Always confirm with market structure, risk management, and your own plan. Past behavior on a chart does not guarantee future results. How I Use This Indicator (Example Workflow) I use this tool primarily as a market-bias and risk-filter, not as a standalone entry signal. Establish the regime first I start by checking the Confluence row: BULL: I focus on long-side ideas and bullish continuation setups. BEAR: I become defensive, avoid counter-trend trades, or look for short/hedge opportunities where applicable. Qualified = NO: I treat the market as transitional and reduce risk. Use Strength to adjust aggressiveness When Strength is elevated and rising, I am more comfortable holding positions and allowing trades more room to develop. When Strength is declining, I tighten stops, reduce position size, or manage trades more actively. Let hysteresis do the work I do not react to every minor fluctuation near the midpoint. The built-in hysteresis thresholds help me stay aligned with the prevailing regime instead of over-trading during indecision. Entries come from other tools Actual entries are taken using price structure, support/resistance, or other indicators. This dashboard simply tells me whether the broader environment supports that idea or not. In short, I treat this indicator as a context and confirmation layer—it helps answer when to be aggressive, cautious, or patient.
Pine Script® Indikator
von Dinjin
Multi TF Volume ATRThis indicator measures volatility using ATR applied to volume across multiple timeframes. It helps identify when real momentum enters the market by showing volume spikes on 1h, 4h, 12h, and Daily charts. When several timeframes spike at the same time, it often signals strong moves, breakouts, or major shifts in volatility. The script calculates Volume ATR for 1h, 4h, 12h, and 1D. Each timeframe generates its own spike condition. The indicator then checks for alignment between timeframes. The 1h histogram changes color based on the strength of the signal. Red means multi timeframe alignment. This is the strongest signal and shows that several timeframes are spiking together. Yellow means a 1h spike only. This is an early warning of local volatility. Blue means no spike. The indicator also plots higher timeframe ATR lines for context. These include 4h ATR, 12h ATR, and 1D ATR. When these lines rise together, volatility is building. Spike markers appear at the top of the pane when higher timeframes trigger. You can choose how strict the alignment should be. Options include all three timeframes (1h, 4h, 12h), at least two timeframes, or including the daily timeframe for even stronger confirmation. The script includes alert conditions for 1h spikes, multi timeframe alignment spikes, and daily spikes. These alerts help you stay ahead of volatility without watching charts constantly. This indicator is useful for many trading styles. Breakout traders use red bars to confirm momentum. Mean reversion traders use daily spikes to confirm volatility conditions. Trend traders watch rising 4h and 12h ATR lines. Scalpers use yellow bars as early warnings. Volume ATR shows how quickly volume is expanding. When several timeframes spike together, it often signals institutional activity, liquidity events, volatility shifts, breakouts, or reversals. This provides information that price alone cannot show.
Pine Script® Indikator
von Blaiise
LEVENT: Lifetime Estimation via Efficiency-Regime EventLEVENT — Lifetime Estimation via Efficiency-Regime Event Transitions LEVENT is a research-grade indicator that estimates the remaining structural lifetime of the current market regime. Unlike trend, volatility, or momentum tools, LEVENT does not measure price movement — it measures how long the current market structure is likely to survive before breaking. This script implements the LEVENT model published on Zenodo (Bülent Duman, 2026) and is built on top of the open-source DERYA (Dynamic Efficiency Regime Yield Analyzer) microstructural efficiency framework. What LEVENT measures LEVENT outputs a single continuous variable L that represents the remaining survival capacity of the active efficiency regime. High L → the current regime has strong structural endurance Falling L → the regime is consuming its capacity L → 0 → regime exhaustion and elevated probability of transition This makes LEVENT a forward-looking structural time variable, not a price indicator. What is inside this script This implementation contains the following components: 1. DERYA (open-source microstructure efficiency) DERYA is computed from OHLC data as: Net close-to-close movement divided by total intrabar range It is smoothed with an EMA and normalized over a rolling window to produce a bounded efficiency state (0–100). This is an open-source indicator and is explicitly credited in the LEVENT paper. 2. Transition Strength (S) S measures how unstable the regime is by combining: the slope of DERYA the acceleration of DERYA This is not RSI, MACD, or ATR — it is a state-transition intensity metric. 3. Regime Engine Markets are classified into four structural regimes: Expansion Exhaustion Collapse Base / Recovery A debounce + persistence filter is used to avoid noise-based flickering. 4. Structural Lifetime (LEVENT L) Each regime is assigned a capacity (Λ) and a fragility (α). LEVENT then evolves as a jump-and-countdown survival process: On regime change → L resets to full capacity Inside a regime → L decays deterministically High instability → faster decay This is not a moving average, oscillator, or probability estimate — it is a structural survival clock. How to use LEVENT LEVENT is designed to be used as a regime-health overlay, not a buy/sell trigger. Typical uses: Detect late-stage trends when L is low Avoid initiating positions when the regime is near collapse Compare structural stability across assets Combine with price, trend, or volume systems Do not use LEVENT alone as a trading signal. LEVENT tells you “how long the structure may last”, not “where price will go.” Visuals Background colors show the current regime The LEVENT line shows remaining structural lifetime A table displays the active regime and current L value Important notes LEVENT is not RSI, MACD, ATR, or trend LEVENT does not predict price direction LEVENT does not issue entry/exit signals LEVENT is a research-grade structural model The DERYA component used here is an open-source microstructural efficiency estimator and is credited accordingly. Risk and disclaimer This script is provided for research and analytical purposes only. It is not financial advice and must not be used as a standalone trading system. Markets are uncertain. All trading decisions and risks remain entirely the responsibility of the user. LEVENT: Lifetime Estimation via Efficiency-regime Event Transitions Introducing a Regime-Dependent Structural Lifetime Estimator for Financial Markets Using OHLC Data Author: DUMAN,Bülent Affiliation: Independent Researcher zenodo.org
Pine Script® Indikator
von blntduman
Long + Short + Signal//@version=6 indicator("Long + Short + Signal", overlay=true) Buy = input.bool(false, "Buy ") Sell = input.bool(false, "Sell ") // ================= INPUTS ================= // ---- LONG ---- periodK_Long = 50 smoothK_Long = 3 periodD_Long = 3 // ---- SHORT ---- periodK_Short = 14 smoothK_Short = 3 periodD_Short = 3 // ================= FUNCTIONS ================= f_stoch_long(tf) => k = request.security(syminfo.tickerid, tf, ta.sma(ta.stoch(close, high, low, periodK_Long), smoothK_Long)) d = request.security(syminfo.tickerid, tf, ta.sma(k, periodD_Long)) k > 50 and d > 50 ? color.green : k < 40 and d < 40 ? color.red : color.gray f_stoch_short(tf) => k = request.security(syminfo.tickerid, tf, ta.sma(ta.stoch(close, high, low, periodK_Short), smoothK_Short)) d = request.security(syminfo.tickerid, tf, ta.sma(k, periodD_Short)) k > 60 and d > 60 ? color.green : k < 40 and d < 40 ? color.red : color.gray // ================= TABLE ================= // 2 rows × 8 columns var table t = table.new(position.top_right, 8, 2, border_width=3) if barstate.islast // ===== HEADINGS (BIGGER) ===== table.cell( t, 0, 0, "Short", bgcolor=color.black, text_color=color.white, text_size=size.large, text_halign=text.align_center ) table.cell( t, 0, 1, "Long", bgcolor=color.black, text_color=color.white, text_size=size.large, text_halign=text.align_center ) // ===== LONG ROW ===== table.cell(t, 1, 0, "1m", bgcolor=f_stoch_short("1"), text_color=color.white, text_size=size.normal) table.cell(t, 2, 0, "5m", bgcolor=f_stoch_short("5"), text_color=color.white, text_size=size.normal) table.cell(t, 3, 0, "15m", bgcolor=f_stoch_short("15"), text_color=color.white, text_size=size.normal) table.cell(t, 4, 0, "60m", bgcolor=f_stoch_short("60"), text_color=color.white, text_size=size.normal) table.cell(t, 5, 0, "D", bgcolor=f_stoch_short("D"), text_color=color.white, text_size=size.normal) table.cell(t, 6, 0, "W", bgcolor=f_stoch_short("W"), text_color=color.white, text_size=size.normal) table.cell(t, 7, 0, "M", bgcolor=f_stoch_short("M"), text_color=color.white, text_size=size.normal) // ===== SHORT ROW ===== table.cell(t, 1, 1, "1m", bgcolor=f_stoch_long("1"), text_color=color.white, text_size=size.normal) table.cell(t, 2, 1, "5m", bgcolor=f_stoch_long("5"), text_color=color.white, text_size=size.normal) table.cell(t, 3, 1, "15m", bgcolor=f_stoch_long("15"), text_color=color.white, text_size=size.normal) table.cell(t, 4, 1, "60m", bgcolor=f_stoch_long("60"), text_color=color.white, text_size=size.normal) table.cell(t, 5, 1, "D", bgcolor=f_stoch_long("D"), text_color=color.white, text_size=size.normal) table.cell(t, 6, 1, "W", bgcolor=f_stoch_long("W"), text_color=color.white, text_size=size.normal) table.cell(t, 7, 1, "M", bgcolor=f_stoch_long("M"), text_color=color.white, text_size=size.normal) lengthK = 14 lengthD = 3 lengthEMA = 3 emaEma(source, length) => ta.ema(ta.ema(source, length), length) highestHigh = ta.highest(lengthK) lowestLow = ta.lowest(lengthK) highestLowestRange = highestHigh - lowestLow relativeRange = close - (highestHigh + lowestLow) / 2 smi = 200 * (emaEma(relativeRange, lengthD) / emaEma(highestLowestRange, lengthD)) // ===== BUY / SELL CONDITIONS ===== buyEntry = ta.crossover(smi, 50) buyExit = ta.crossunder(smi, 50) sellEntry = ta.crossunder(smi, -40) sellExit = ta.crossover(smi, -40) // ===== PLOTS ===== plotshape( Buy and buyEntry, title="BUY", style=shape.triangleup,location=location.belowbar, color=color.green,size=size.small, text="BUY") plotshape( Buy and buyExit, title="EXIT BUY", style=shape.triangledown, location=location.abovebar, color=color.lime,size=size.tiny, text="EXIT") plotshape( Sell and sellEntry,title="SELL", style=shape.triangledown, location=location.abovebar, color=color.red, size=size.small, text="SELL") plotshape( Sell and sellExit, title="EXIT SELL", style=shape.triangleup, location=location.belowbar, color=color.orange, size=size.tiny, text="EXIT") shortest = ta.ema(close, 9) shortEMA = ta.ema(close, 21) longer = ta.ema(close, 50) longest = ta.ema(close, 200) plot(shortest, color=color.red, title="EMA 9") plot(shortEMA, color=color.orange, title="EMA 21") plot(longer, color=color.aqua, title="EMA 50") plot(longest, color=color.blue, title="EMA 200")
Pine Script® Indikator
von GunjanShah
Yield Curve Widget (Nasdaq) 📊 Yield Curve Risk Widget — Nasdaq (MNQ) 🔍 What this indicator does This indicator is a macro risk widget designed for Nasdaq (MNQ) traders. It combines the US Treasury yield curve (10Y vs 2Y) with price confirmation from Nasdaq itself to provide a directional bias. ⚠️ This is NOT an entry signal. It is a context and risk filter to help you decide which side of the market to prioritize. 🧠 What each element means 🔹 10Y (e.g. 4.17) The 10-year US Treasury yield, expressed as annual percentage (%). Tech stocks and Nasdaq are highly sensitive to the 10Y Falling 10Y → supportive for Nasdaq Rising 10Y → pressure on Nasdaq 🔹 2Y (e.g. 3.54) The 2-year US Treasury yield, closely tied to Federal Reserve expectations. 🔹 Spread (10Y − 2Y) Represents the slope of the yield curve. Spread expanding → curve normalizing → healthier macro environment Spread contracting → curve flattening or inverting → higher risk 🔹 10Y slope / Spread slope (▲ ▼ •) Shows the recent direction of movement: ▲ Rising ▼ Falling • Flat / neutral 👉 Direction matters more than absolute level. 🔹 Regime (BULL / BEAR / NEUT) Structural interpretation of the yield curve: BULL → rates favor risk assets BEAR → rates pressure risk assets NEUT → mixed macro signals 🔹 RISK ON / RISK OFF / NEUTRAL Combination of macro (yield curve) and price confirmation (Nasdaq trend): RISK ON → Favorable curve and Nasdaq above its trend EMA RISK OFF → Unfavorable curve and Nasdaq below its trend EMA NEUTRAL → No confirmation 🔹 Intensity (0–100) Measures the strength of the current regime. 0–40 → weak / noisy environment 40–60 → transition phase 60–100 → strong macro regime 🔹 Trade Bias (BUY / SELL / WAIT) This is the practical conclusion of the indicator: BUY NASDAQ → Risk ON confirmed + intensity above threshold SELL NASDAQ → Risk OFF confirmed + intensity above threshold WAIT → Mixed conditions, no clear edge ⚠️ This is NOT a trade trigger, only a directional filter. 🎯 How to use it (the right way) ✅ Use it as a FILTER BUY NASDAQ → prioritize long setups only SELL NASDAQ → prioritize short setups only WAIT → trade only A+ setups or stay flat ❌ What NOT to do Do not enter trades solely because BUY/SELL appears Do not ignore your own risk management rules Do not rely on it during major news events (CPI, FOMC, NFP) ⚙️ Suggested settings (MNQ) Day Trading (1m / 5m) MNQ Trend EMA: 200 Slope lookback: 5–10 Min Risk Intensity: 55–65 Intraday / Swing Yields TF: 15m or 60m Min Risk Intensity: 60–75 🧩 Quick summary 📉 Falling rates → Nasdaq tends to rise 📈 Rising rates → Nasdaq tends to fall 🧠 Yield curve + price confirmation = directional edge 🎯 Use as a filter, not as an entry signal Disclaimer: This indicator provides macro context only. Always combine it with your own technical setups, execution rules, and risk management.
Pine Script® Indikator
von EduWarlock
Wx Gann WindowsWx Gann Windows — Seasonal Time Windows & Forward Markers Wx Gann Windows highlights the handful of Gann-style seasonal dates that matter most, without cluttering your chart. It draws subtle “time windows” around key dates each year and optionally projects the next 12 months of dates into the future so you can keep them in mind when planning trades or options spreads. What it shows 1. Seasonal Windows (background bands) • Equinox / Solstice windows (Spring, Summer, Autumn, Winter). • Optional midpoint (cross-quarter) windows: early Feb / May / Aug / Nov. • Each window is a small number of days (default 3) centered on the approximate calendar date, with a soft background band so price action remains in focus. 2. On-Chart Labels (optional) • Small labels like “Spring Eq.”, “Winter Sol.”, “Feb Mid” printed just above the current chart’s price range. • One label per window, on the first bar of the window. 3. Future Projections (next 12 months) • For each key date, the script projects the next occurrence into the future. • Draws a vertical dotted line from near the chart low to above the chart high, plus a label such as “Spring Eq. (next)” or “Aug Mid (next)”. • This gives you a 12-month “time roadmap” for cycles-sensitive planning (e.g., options, swing trades) without manual date marking. Inputs Window Settings • Equinox / Solstice Window (days) – size of the seasonal bands (default 3 days). • Midpoint Window (days) – size of the mid-Feb / May / Aug / Nov bands. Visibility • Show Equinox & Solstice Windows – toggle main seasonal bands on/off. • Show Midpoint Windows (Feb/May/Aug/Nov) – toggle cross-quarter bands. • Show Labels (on windows) – show/hide the on-chart labels above price. Future Projections • Project Next 12 Months (future markers) – toggle the forward vertical lines + “(next)” labels. How to use it • Treat these dates as awareness windows, not prediction signals. • Use them to: • Be extra alert for potential turns, accelerations, or exhaustion. • Tighten risk or avoid opening new positions right into a window if your system suggests caution. • Plan options expiries or swing entries with time structure in mind. Always confirm decisions with your own system (trend, structure, volume, breadth, macro), not the dates alone. Notes & Disclaimer • Dates are approximate calendar anchors inspired by Gann’s seasonal and cross-quarter work, using simple ±N-day windows. • Works on any symbol and timeframe; windows are based on calendar dates, not bar count. • This tool is educational and informational only. It does not place orders and is not financial advice. Always test and integrate with your own strategy and risk management.
Pine Script® Indikator
von WesPX
UT Bot Alerts with R-Targets & Results< DONE BY RM ALOWAIS > Indicator Overview This indicator provides rule-based BUY and SELL signals with automatic risk management levels. Each trade setup includes a predefined Stop Loss and up to three Take Profit targets (TP1, TP2, TP3), allowing traders to manage risk and scale exits systematically. How It Works BUY and SELL signals are generated based on internal market conditions. Each signal plots: Entry point Stop Loss (SL) Take Profit levels (TP1, TP2, TP3) After price action completes, the indicator displays the actual result of the trade: Result: TP1 / TP2 / TP3 / SL Exit labels may appear when a trade is closed early due to invalidation or opposite conditions. Key Features Non-repainting signals Built-in risk-to-reward structure Visual trade tracking with clear outcomes Suitable for intraday and swing trading Works on multiple markets and timeframes Usage Notes This indicator is a decision-support tool, not financial advice. Best results are achieved when used with proper risk management and higher-timeframe confirmation. Performance may vary depending on market conditions (trend vs range). Disclaimer This script is provided for educational and informational purposes only. The author is not responsible for any financial losses. Always test and validate before using in live trading.
Pine Script® Indikator
von RMALOWAIS
2
VIX Option Hedge Monitor# VIX Option Hedge Monitor Inspired by Cem Karsan The VIX Option Hedge Monitor is a specialized indicator designed to detect unusual hedging activity in VIX call options that may signal impending market volatility or potential market crashes. By monitoring deep out-of-the-money (OTM) VIX calls that are 1-2weeks out—typically 150-170% OTM with premiums around $0.05-$0.10—this indicator identifies when institutional players are aggressively hedging for tail risk events. ## What It Does This indicator tracks the intraday percentage change of a specific VIX option contract from its daily opening price and provides two distinct alert levels: - **🟠 Orange Alert (200%+ increase)**: "Increased Hedging" - Indicates elevated hedging activity - **🔴 Red Alert (400%+ increase)**: "Crash Imminent" - Suggests extreme hedging behavior often seen before major market dislocations ## Why This Matters Deep OTM VIX calls are typically used by institutional investors as insurance against severe market crashes. When these options suddenly spike in price, it often indicates that sophisticated market participants are positioning for significant volatility. Historically, extreme spikes in these types of options have preceded major market corrections. ## How to Use ### Initial Setup 1. **Add the Indicator** - Open TradingView and click on "Indicators" at the top of your chart - Search for "VIX Option Hedge Monitor" - Click to add it to your chart 2. **Find Your VIX Option Ticker** - Go to VIX options chain in TradingView - Find an expiration date that is more than 1 week out but less than 4 weeks out - Locate a call strike approximately 168% OTM (these typically trade at $0.05-$0.10) - Note the exact option ticker symbol (e.g., VIX260121C37.0) 3. **Configure the Indicator** - Click on the gear icon next to "VIX Option Hedge Monitor" in your indicator list - In the "VIX Option Symbol" field, paste your option ticker - Adjust thresholds if desired (default: 200% orange, 400% red) - Click "OK" ### Setting Up Alerts (Recommended) 1. Click the three dots (⋮) next to the indicator name 2. Select "Add alert on VIX Option Hedge Monitor" 3. Choose your alert condition: - "Increased Hedging Alert" for the 200% threshold - "Crash Hedge Behavior Alert" for the 400% threshold 4. Configure how you want to receive alerts (popup, email, SMS, etc.) 5. Click "Create" ### Ongoing Maintenance **Rolling to New Expiration:** When your current option is within 7 days of expiration, you'll need to update to a new option: 1. Find a new VIX call option meeting the criteria (1-3 weeks out, ~168% OTM) 2. Open the indicator settings (gear icon) 3. Update the "VIX Option Symbol" field with the new ticker 4. Click "OK" The indicator will immediately begin tracking the new option. ## Understanding the Display ### Info Table (Top Right) - **Option**: Current option ticker being monitored - **Current Price**: Real-time option price - **Day Open**: Option's opening price for the current trading day - **% Change**: Percentage increase from day open - **Status**: Current alert level (Normal, Increased Hedging, or Crash Imminent) ### Chart Elements - **Blue Line**: Option price movement - **White Line**: Percentage change from daily open - **Orange Dashed Line**: 200% threshold marker - **Red Dashed Line**: 400% threshold marker - **Triangle Markers**: Appear when thresholds are crossed - **Background Color**: Changes to orange or red when alerts are triggered ## Settings & Customization ### Adjustable Parameters **VIX Option Symbol** (Required) - The exact ticker of the VIX option you want to monitor - Must be updated manually when rolling to new expirations - Example: VIX250131C00055000 **Orange Alert Threshold** (Default: 200%) - Percentage increase from day open to trigger "Increased Hedging" alert - Adjust higher for fewer false positives or lower for earlier warnings **Red Alert Threshold** (Default: 400%) - Percentage increase from day open to trigger "Crash Imminent" alert - Represents extreme hedging behavior **Show % Change Line** (Default: On) - Toggle visibility of the percentage change line **Show Price Line** (Default: On) - Toggle visibility of the option price line ## Trading Strategy Considerations ### This Indicator Is: - A early warning system for potential market volatility - A tool to monitor institutional hedging behavior - Most effective when combined with other technical and fundamental analysis ### This Indicator Is NOT: - A standalone trading signal - A guarantee of market crashes - A timing tool (alerts may come hours or days before events) ### Best Practices: 1. **Don't trade solely on this indicator** - Use it as one input among many 2. **Monitor throughout the day** - Set alerts but also check manually 3. **Consider market context** - High VIX environments may see more false signals 4. **Roll options weekly** - Keep your monitored option in the 1-3 week window 5. **Track multiple strikes** - Consider monitoring 2-3 different strikes for confirmation ## Technical Notes - The indicator uses daily open as the baseline for percentage calculations - Price data refreshes based on your chart timeframe - Works best on intraday timeframes (1min - 15min) for quick alerts - Requires TradingView access to options data for the ticker you specify ## Interpretation Guide **Normal Operation** (0-199% increase) - Market functioning normally - Standard hedging activity - No action required **Increased Hedging** (200-399% increase) - Heightened caution warranted - Consider reviewing portfolio hedges - Monitor closely for further escalation - May indicate near-term volatility concerns **Crash Imminent** (400%+ increase) - Extreme hedging activity detected - Institutional players positioning for severe downside - Consider defensive positioning - Review stop losses and portfolio allocation - Historical precedent suggests elevated crash risk ## Limitations - Requires manual option ticker updates - Cannot automatically select optimal strikes - Low liquidity options may show erratic price movements - False signals possible during high volatility periods - Past performance does not guarantee future results ## Support & Updates For questions, suggestions, or to report issues, please leave a comment on the indicator page. ## Disclaimer This indicator is for informational and educational purposes only. It does not constitute financial advice, investment recommendations, or trading signals. Always conduct your own research and consult with a qualified financial advisor before making investment decisions. Options trading carries significant risk and may not be suitable for all investors. --- **Version**: 1.0 **Last Updated**: January 2026 **Compatible With**: TradingView Pine Script v5
Pine Script® Indikator
von surfgurujeff
ICT/SMC HUDOverview This indicator is an ICT/SMC-inspired market structure tool that detects: Swing Structure (pivot-based) BOS (Break of Structure) and CHoCH (Change of Character) Liquidity Sweeps (buy-side & sell-side) Premium/Discount filter using a simple equilibrium (EQ) midpoint A Hold Score (0–5) system calculated from a higher timeframe (HTF) Optional TP/SL visualization box (with TP2 expansion when Hold Score is strong) ⚠️ This is an educational tool, not a guaranteed trading system. Core Logic (Where signals come from) This script builds a simplified ICT/SMC framework using 3 layers: 1) Market Structure via Swings (Pivot High/Low) The script finds swing highs/lows using: ta.pivothigh(high, swingLen, swingLen) ta.pivotlow(low, swingLen, swingLen) These swings become the reference points for structure breaks. 2) BOS / CHoCH Detection BOS Up = price closes above the last swing high BOS Down = price closes below the last swing low trend updates to 1 (bullish) or -1 (bearish) based on BOS CHoCH triggers when BOS occurs against the current trend CHoCH Up = trend was bearish, then BOS Up happens CHoCH Down = trend was bullish, then BOS Down happens 3) Liquidity Sweep + Premium/Discount Filter Sell-side sweep: low breaks below last swing low, but closes back above it Buy-side sweep: high breaks above last swing high, but closes back below it Equilibrium (EQ) midpoint is: (lastSwingHigh + lastSwingLow) / 2 Discount = price below EQ Premium = price above EQ Signal Rules (Buy / Sell) Buy Signal Sell-side sweep + (CHoCH Up or BOS Up) OR BOS Up while price is in Discount Sell Signal Buy-side sweep + (CHoCH Down or BOS Down) OR BOS Down while price is in Premium Hold Score System (0–5) — HTF confirmation The script calculates a Hold Score from HTF using 5 checks: HTF EMA Bias Bullish hold bias: EMA Fast > EMA Mid Bearish hold bias: EMA Fast < EMA Mid Volatility Expansion Uses HTF Bollinger Band width; if width is increasing, expansion is “OK” Mid Acceptance HTF close relative to HTF BB basis (SMA) Follow-through after Entry Requires N consecutive bars closing in favor of the entry direction No Opposite Break Avoid holding if opposite BOS/CHoCH appears Hold Score = sum of the 5 checks (0–5) TP/SL Box (Optional) When a new Buy/Sell signal occurs: Entry is set at current close SL uses: Swing-based stop (lowest/ highest of last N bars) optional ATR buffer TP1 and TP2 are set using Risk:Reward ratios TP2 Expansion (Optional) If Hold Score ≥ threshold: TP2 RR increases by extraRRonHold Can be set to expand only (never shrink) Auto-hide TP/SL Drawings (Optional) If enabled, the TP/SL box/lines/labels will automatically disappear after N bars. This is useful for clean charts while still keeping Hold Score logic running. Best Use Cases ✅ Works best during liquidity sessions: London Killzone New York Killzone ✅ Recommended timeframes: Structure: 15m / 1h Entry refinement: 5m / 1m Hold Score HTF: 1h or 4h Inputs Guide (Quick) Swing length (Structure): controls swing sensitivity (higher = fewer swings) Hold Score HTF: HTF used for Hold Score confirmation TP/SL Box: visualization tool, not order execution Auto-hide: removes drawings after N bars for clean charts TP2 Expand: increases TP2 target when Hold Score is strong Disclaimer This indicator does not place trades and does not guarantee profits. Always manage risk, backtest, and validate with your own strategy.
Pine Script® Indikator
von Roongee
ICT IPDA LookbackThis description is tailored for the TradingView community, using the specific terminology associated with Michael Huddleston's (ICT) Interbank Price Delivery Algorithm (IPDA). 📜 TradingView Indicator Description ICT IPDA Lookback Engine (20-40-60 Day Cycles) Overview This indicator automates the IPDA Data Range lookback periods as taught by Michael J. Huddleston (ICT). In the Interbank Price Delivery Algorithm, time is the primary filter. The algorithm references specific lookback windows—20, 40, and 60 trading days—to seek liquidity and rebalance inefficiencies. Instead of manually counting bars every morning, this tool plots precise vertical anchors to help you identify the Institutional Order Flow and the "Draw on Liquidity" (DOL) within the current dealing range. 🛠️ Key Features Rolling Lookback Anchors: Automatically plots red vertical lines at the 20, 40, and 60-day intervals. Time-Based Accuracy: Calculated using calendar-adjusted trading days to ensure the lines land on the correct institutional data points, regardless of weekends or holidays. Multi-Asset Support: Works seamlessly across Forex, Futures, Indices, and Commodities. Real-Time Movement: The lines shift dynamically with the current candle, maintaining the exact IPDA window as the algorithm processes new data. 💡 How to Use (ICT IPDA Logic) Define the Context: Look back at the 20-day range (Short-term), 40-day range (Intermediate-term), and 60-day range (Long-term). Identify PD Arrays: Use these vertical lines to anchor your search for Old Highs/Lows, Fair Value Gaps (FVG), and Order Blocks (OB) within those specific windows. Determine Premium vs. Discount: Check where the current price sits relative to the Highs and Lows of these three ranges to establish your Daily Bias. Quarterly Shifts: Monitor how price reacts as it reaches the extremity of the 60-day lookback, often signaling a potential "Quarterly Shift" in institutional direction. 📖 Technical Details Indicator Type: Overlay Calculations: Uses timenow and millisecond conversion for precise "Calendar Day" placement. Best Timeframes: Designed for the Daily (1D) chart but can be used on lower timeframes (H4, H1, M15) to visualize the higher-timeframe data ranges while scalping.
Pine Script® Indikator
von jellylungs
HMA Pro Flow [Mladen] + SignalsThis indicator is an enhanced version of the classic Hull Moving Average (HMA), based on the logic developed by Mladen. It improves upon the standard HMA by allowing users to adjust the "speed" of the curve using a custom Divisor, and it integrates a secondary Trend Filter to generate high-probability entries and distinct exit signals. The script is designed to help traders identify the trend direction while filtering out noise during choppy markets. How It Works 1. The "Mladen" Calculation The standard Hull Moving Average uses a fixed formula involving a divisor of 2 (n/2). This script exposes that divisor as a variable input. 2. Dual-HMA System This indicator runs two separate HMA calculations simultaneously: Entry HMA (Fast): Reacts quickly to price changes to generate immediate signals. Trend Filter (Slow): A longer-term HMA used to determine the overall market bias. Signal Logic The indicator generates three types of signals based on the alignment of the Fast Entry HMA and the Slow Trend Filter. 🟢 BUY Signal (Green Label) Condition: The Fast HMA turns green (rising) AND the Trend Filter is also green (rising). Meaning: Momentum and Trend are aligned. Safe to enter Long. 🔴 SELL Signal (Red Label) Condition: The Fast HMA turns red (falling) AND the Trend Filter is also red (falling). Meaning: Momentum and Trend are aligned. Safe to enter Short. ❌ STOP / CLOSE Signal (Orange 'X') Condition: The Fast HMA changes color, but it conflicts with the Trend Filter. Example (Long): You are in a Buy trade. The Fast HMA turns Red, but the Trend Filter is still Green. Meaning: This is likely a pullback, not a reversal. The indicator suggests closing the current position (Stop) but does not issue a signal to reverse into a new position. This prevents getting trapped in counter-trend trades. Settings Entry HMA Settings Entry Period: Length of the fast signal line (Default: 14). Entry Divisor: Controls smoothness. Lower values (e.g., 0.1) result in a very smooth line; higher values result in sharper turns. Trend Filter Settings Use Trend Filter: If unchecked, the indicator acts like a standard HMA (Buying/Selling on every color change). Filter Period: Length of the slow trend line (Default: 300). Show Filter: Toggles the visibility of the thick trend line on the chart. Visuals Toggle visibility for Buy, Sell, and Stop signals individually to keep your chart clean. Credits Original HMA logic by Alan Hull. Variable divisor concept adapted from Mladen's work on MT4/MT5. Custom pine scripting for trend filtering and signal logic - Vdubus
Pine Script® Indikator
von vdubus
5
CJ Oscillator Matrix PRO (Flow + Momentum + Heatmap)CJ Oscillator Matrix PRO is not a buy/sell signal indicator and does not follow price candle by candle. It is a market context and momentum analysis tool designed to help traders understand trend strength, impulse, and overall market conditions. This indicator combines momentum (TSI) and money flow (CMF) into a single oscillator, while the heatmap background highlights when the market is balanced or extended. Strong colors represent high pressure or potential exhaustion zones, not automatic entries or reversals. Use this tool to: Identify trend direction and strength Understand impulse vs. consolidation Avoid chasing price during extended moves Add context to your technical analysis Best used alongside price action, structure, EMAs, and risk management. This indicator does not predict price — it helps you understand market behavior.
Pine Script® Indikator
von CriptoJald
PLOW/PLHW (Potential weekly highs/lows)AP Capital – PLOW / PLHW (Potential Weekly Low / High) This indicator highlights Potential Weekly Lows (PLOW) and Potential Weekly Highs (PLHW) in real time, using current-week price action, session context, and confirmed candle closes. It is designed for intraday and swing traders who want early-week and late-week structure levels without repainting or hindsight bias. 🔹 How It Works Potential Weekly Low (PLOW) Detected during early week sessions Triggers when price prints the current week’s lowest low Confirmed only on candle close Typically aligns with liquidity grabs, stop runs, or accumulation Potential Weekly High (PLHW) Detected during late week sessions Triggers when price prints the current week’s highest high Confirmed only on candle close Often marks distribution or exhaustion zones 📊 Visual Elements Clean weekly high & low levels Optional weekly midpoint Session-aware confirmation Non-repainting labels Minimalist layout (no clutter) ⚙️ Key Features Works on any intraday timeframe Fully non-repainting Session-based logic (early vs late week) Optional weekly range info panel Suitable for Gold, FX, Indices, Crypto 🧠 Best Use Cases Fade moves into weekly extremes Combine with: Previous Day High / Low Liquidity sweeps Market structure shifts Identify high-probability reversals Avoid chasing price late in the week ⚠️ Important Notes This is NOT predictive — levels are confirmed from live price action Best used as context, not a standalone entry system Designed to complement price action & liquidity-based trading 📌 Disclaimer This indicator is for educational purposes only. Not financial advice. Always manage risk.
Pine Script® Indikator
von APCapitalTrading