Auf geht's

Candlestick analysis

LW Outside Day Flip[SpeculationLab]Applicable Timeframe ⚠️ Note: This indicator is primarily designed for the Daily timeframe. Larry Williams’ original discussion and statistics were based on daily data. While it can technically be applied to other timeframes, results may vary. It is strongly recommended to use it on daily charts. Overview This indicator marks a classic “Outside Day + Extreme Close” price action pattern. The idea comes from Larry Williams’ Long-Term Secrets to Short-Term Trading (2nd edition, Chapter 7). The indicator does not execute trades or generate alerts — it simply plots visual markers on the chart when the pattern conditions are met, to assist research and review. Logic Outside Bar Condition Current high > previous high Current low < previous low Extreme Close Filter Long signal: Close < previous low Short signal: Close > previous high Confirmation Signals are only confirmed at bar close (barstate.isconfirmed), to avoid repainting during intrabar movement. Chart Display When a long signal is triggered, a green downward triangle is plotted above the bar. When a short signal is triggered, a red upward triangle is plotted below the bar. Signals are overlaid directly on the price chart (overlay=true) and serve only as visual cues. Usage Notes Best used as a filter or secondary confirmation tool, not as a standalone entry trigger. Consider combining with higher timeframe trend, key support/resistance, or volume analysis. Entries, stop losses, and profit targets should be defined and tested independently by the trader. Limitations and Risks In strong trending markets, these signals may fail. In low-liquidity or gapping conditions, accuracy may be reduced. A single candlestick pattern cannot ensure consistent profitability. Disclaimer This script is for educational and research purposes only. It is not financial advice. Trading carries risk, and users are solely responsible for their own decisions and results. =================== 指标适用范围 ⚠️ 特别提示：本指标主要适用于日线图（Daily Timeframe）。 Larry Williams 的原始讨论与统计均基于日线数据。虽然技术上可以在其它周期应用，但效果可能会不同，建议严格以日线作为主要参考周期。 功能概述 本指标用于在图表上标记一种经典的“外包线 + 极端收盘”的价格行为形态。思路参考 Larry Williams 在《Long-Term Secrets to Short-Term Trading》（第二版，第七章）中对日线“Outside Day”与反向收盘的讨论。指标不包含交易执行或提醒功能，仅在满足条件时绘制信号标记，用于辅助研究。 计算逻辑 外包线（Outside Bar）判定 最高价高于前一根K线的最高价； 最低价低于前一根K线的最低价。 极端收盘过滤 做多信号（Long）：收盘价低于前一根K线的最低价； 做空信号（Short）：收盘价高于前一根K线的最高价。 确认方式 仅在K线收盘后确认（避免盘中信号反复出现/消失）。 绘图说明 触发做多条件时，在K线 上方 绘制 绿色 向下三角形标记。 触发做空条件时，在K线 下方 绘制 红色 向上三角形标记。 信号直接叠加在价格图上（overlay=true），仅作提示。 使用建议 建议作为筛选条件或二次确认工具，不要单独作为入场依据； 可以配合趋势方向、关键支撑/阻力、成交量等其他因素一起使用； 入场、止损与止盈需由使用者自行定义和验证。 限制与风险 在强趋势行情中，信号可能失效； 在低流动性或跳空行情中，信号准确度下降； 单一形态不能保证稳定盈利。 免责声明 本指标仅用于教育与研究，不构成投资建议。实际交易风险由使用者自行承担。
Pine Script® Indikator
von SpeculationLab
Macias Golden ZoneThe Macias Golden Zone indicator automatically detects the most recent pivot leg and draws the key Fibonacci retracement band between 0.618 – 0.790, with the 0.706 midline highlighted. 🔑 Features:     •    Auto-detects swing legs from pivot highs/lows     •    Shaded Golden Zone for easy visualization of prime reaction areas     •    Optional 0.706 midline for sniper entries     •    Optional 0.079 retrace line for deeper confluence     •    Works with wicks (High/Low) or closes 📈 Use it to identify high-probability pullback zones where price often reacts during trending moves. ⚠️ This tool is for educational purposes only. Not financial advice. Always manage risk. From Christopher Macias and the Golden zone family
Pine Script® Indikator
von saucyboyrecords
Trend Candle CounterComplete Tutorial: Trend Candle Counter Pine ScriptTable of Contents Installation Guide Understanding the Indicator How It Works Customization Options Trading Strategies Setting Up Alerts Troubleshooting 1. Installation Guide {#installation}Step-by-Step Installation:Step 1: Open TradingView Go to www.tradingview.com Log in to your account Step 2: Access Pine Editor Click on "Pine Editor" tab at the bottom of the chart Or press Alt + E (Windows) or Option + E (Mac) Step 3: Create New Indicator Click "Open" → "New blank indicator" Delete any default code Step 4: Paste the Script Copy the entire Trend Candle Counter script Paste it into the editor Step 5: Save and Apply Click "Save" (or Ctrl + S) Give it a name: "Trend Candle Counter" Click "Add to Chart" ✅ Done! The indicator should now appear on your chart.2. Understanding the Indicator {#understanding}What Does It Do?This indicator numbers each candle based on the current trend: {scrollbar-width:none;-ms-overflow-style:none;-webkit-overflow-scrolling:touch;} ::-webkit-scrollbar{display:none}Trend TypeNumberingVisualUptrend+1, +2, +3, +4...🟢 Green labelsDowntrend-1, -2, -3, -4...🔴 Red labelsTrend ChangeResets to ±1Label color switchesVisual Components: Candle Labels - Numbers above each candle Trend Line (EMA) - Green (up) / Red (down) Background Shading - Light green/red tint Info Table - Top-right corner showing: Current trend direction Current candle number Current price 3. How It Works {#how-it-works}Trend Detection Logic:IF Close > EMA → UPTREND (positive counting) IF Close < EMA → DOWNTREND (negative counting) Counting Mechanism:Example Uptrend:Candle 1: Close > EMA → Label: +1 Candle 2: Close > EMA → Label: +2 Candle 3: Close > EMA → Label: +3 Candle 4: Close < EMA → Label: -1 (trend changed!) Example Downtrend:Candle 1: Close < EMA → Label: -1 Candle 2: Close < EMA → Label: -2 Candle 3: Close < EMA → Label: -3 Candle 4: Close > EMA → Label: +1 (trend changed!) Key Insight:The higher the absolute number, the longer the trend has been running!4. Customization Options {#customization}Accessing Settings: Click the gear icon ⚙️ next to the indicator name Go to "Inputs" tab Available Parameters: {scrollbar-width:none;-ms-overflow-style:none;-webkit-overflow-scrolling:touch;} ::-webkit-scrollbar{display:none}ParameterDefaultDescriptionRecommendationTrend Detection Length14EMA period for trend5-10: Scalping14-20: Day trading50-200: Swing tradingShow Candle Numbers✅ YesDisplay labelsDisable for cleaner chartLabel SizeSmallSize of numbersTiny: Multi-timeframeLarge: Focus on one chartUptrend ColorGreenPositive number colorCustomize to preferenceDowntrend ColorRedNegative number colorCustomize to preferenceOptimization by Trading Style:For Scalpers (1m - 5m charts):Trend Detection Length: 5-10 Label Size: Tiny Show Labels: Optional (can be cluttered) For Day Traders (15m - 1h charts):Trend Detection Length: 14-20 Label Size: Small Show Labels: Yes For Swing Traders (4h - Daily charts):Trend Detection Length: 50-100 Label Size: Normal Show Labels: Yes 5. Trading Strategies {#strategies}Strategy 1: Trend Reversal TradingEntry Signals: Buy: When counter changes from negative to +1 Sell: When counter changes from positive to -1 Confirmation: Wait for +2 or -2 to confirm trend strength Use additional indicators (RSI, MACD) for validation Example:Candle: -5, -6, -7, -8, +1, +2 ← BUY HERE Stop Loss: Below the -8 candle low Target: When counter reaches +8 to +10 Strategy 2: Trend Continuation TradingEntry Signals: Buy: Enter on pullbacks during uptrend (e.g., at +3, +5, +7) Sell: Enter on bounces during downtrend (e.g., at -3, -5, -7) Risk Management: Avoid entering at high numbers (+15, -15) - trend may be exhausted Example:Candle: +1, +2, +3 ← Small pullback, BUY Continue: +4, +5, +6, +7 Exit: When counter resets to -1 Strategy 3: Trend Exhaustion DetectionWarning Signs: Counter reaches +10 or higher → Uptrend may be overextended Counter reaches -10 or lower → Downtrend may be overextended Action: Tighten stop losses Take partial profits Watch for reversal patterns (doji, engulfing) Strategy 4: Multi-Timeframe AnalysisSetup: Add indicator to 3 timeframes (e.g., 15m, 1h, 4h) Look for alignment Best Trades:15m: +1 (new uptrend) 1h: +5 (established uptrend) 4h: +3 (strong uptrend) → HIGH PROBABILITY BUY 6. Setting Up Alerts {#alerts}Built-in Alert Conditions:The script includes 2 automatic alerts: "Uptrend Started" - Triggers when counter = +1 "Downtrend Started" - Triggers when counter = -1 How to Set Up Alerts:Step 1: Right-click on chart Select "Add Alert" Step 2: Configure Alert Condition: Select "Trend Candle Counter" Choose: "Uptrend Started" or "Downtrend Started" Options: Once per bar close (recommended) Webhook URL (for automation) Step 3: Notification Settings ✅ Popup ✅ Send email ✅ Push notification (mobile app) ✅ Play sound Step 4: Create Alert Click "Create" Custom Alert Ideas:Alert for Specific Candle Numbers: Notify when counter reaches +5 or -5 Notify when counter exceeds +10 or -10 (exhaustion) 7. Troubleshooting {#troubleshooting}Common Issues & Solutions:Issue 1: Labels are too cluttered Solution: Disable "Show Candle Numbers" in settings Use larger timeframe Reduce label size to "tiny" Issue 2: Too many false signals Solution: Increase "Trend Detection Length" (e.g., 20, 50) Wait for +2 or -2 confirmation Combine with other indicators Issue 3: Trend line doesn't match price action Solution: Adjust EMA length to match your trading style Consider using different trend detection (SMA, HMA) Issue 4: Indicator not showing on chart Solution: Check if it's in a separate pane - move to main chart Refresh the page Re-add the indicator Issue 5: Counter seems delayed Solution: This is normal - indicator confirms on candle close For faster signals, use lower timeframe Reduce EMA length (but expect more noise) 8. Advanced Tips 💡Combining with Other Indicators:Best Combinations: RSI + Trend Candle Counter Buy at +1 when RSI > 50 Sell at -1 when RSI < 50 MACD + Trend Candle Counter Confirm +1 with MACD bullish crossover Confirm -1 with MACD bearish crossover Volume + Trend Candle Counter Strong trends (+1) should have increasing volume Low volume at high numbers (+10) = exhaustion Reading Market Psychology: {scrollbar-width:none;-ms-overflow-style:none;-webkit-overflow-scrolling:touch;} ::-webkit-scrollbar{display:none}Counter ValueMarket Psychology+1 to +3Early adopters entering+4 to +7Momentum building+8 to +12FOMO phase+13+Extreme greed - caution!-1 to -3Early sellers-4 to -7Panic building-8 to -12Capitulation-13+Extreme fear - reversal likely9. Real Trading Example 📊Scenario: BTC/USD 1H ChartTime | Counter | Action --------|---------|---------------------------------- 10:00 | -8 | Downtrend established 11:00 | -9 | Still falling 12:00 | -10 | Exhaustion zone - watch closely 13:00 | +1 | ✅ BUY SIGNAL - Trend reversal! 14:00 | +2 | Confirmation - trend valid 15:00 | +3 | Hold position 16:00 | +4 | Add to position (optional) 17:00 | +5 | Move stop loss to breakeven ... 22:00 | +11 | Take partial profits 23:00 | +12 | Tighten stop loss 00:00 | -1 | ❌ EXIT - Trend reversed
Pine Script® Indikator
von lohanineeraj
Daily Midnight Lines# Daily Midnight Lines A simple and efficient TradingView indicator that automatically draws vertical lines at the start of each new day. * * ## Features ✅ **Precise Timing**: Draws lines at exactly 00:00 or on the first bar of the new day ✅ **Calendar Days**: Uses calendar days, not trading sessions ✅ **Customizable Design**: Green color with transparency for comfortable viewing ✅ **High Performance**: Optimized code without unnecessary calculations ✅ **Universal**: Works on all timeframes and instruments ## Settings - **Line Color**: Green with 30% transparency (customizable) - **Line Width**: 1 pixel (1 to 3) - **Mode**: Exactly at 00:00 or first bar of new day ## Applications - Separating trading days on the chart - Analyzing price behavior at the start of the day - Planning trading strategies - Statistical analysis by days ## Compatibility - Pine Script v6 - All timeframes (1m - 1M) - All instruments (stocks, forex, crypto, futures) - All markets (24/7, daily, night sessions) Perfect for day traders, scalpers, and analysts who want better chart orientation and intraday pattern analysis. --- ## Ежедневные Полночные Линии Простой и эффективный индикатор TradingView, который автоматически рисует вертикальные линии в начале каждого нового дня. ## Особенности ✅ **Точное время**: Рисует линии в 00:00 или на первом баре нового дня ✅ **Календарные дни**: Использует календарные дни, а не торговые сессии ✅ **Настраиваемый дизайн**: Зеленый цвет с прозрачностью для комфортного просмотра ✅ **Высокая производительность**: Оптимизированный код без лишних вычислений ✅ **Универсальность**: Работает на всех таймфреймах и инструментах ## Настройки - **Цвет линий**: Зеленый с прозрачностью 30% (настраивается) - **Толщина линий**: 1 пиксель (от 1 до 3) - **Режим**: Точно в 00:00 или первый бар нового дня ## Применение - Разделение торговых дней на графике - Анализ поведения цены в начале дня - Планирование торговых стратегий - Статистический анализ по дням ## Совместимость - Pine Script v6 - Все таймфреймы (1м - 1М) - Все инструменты (акции, форекс, крипто, фьючерсы) - Все рынки (24/7, дневные, ночные сессии) Идеально подходит для дневных трейдеров, скальперов и аналитиков, которые хотят лучше ориентироваться на графике и анализировать внутридневные паттерны. **Pine Script v6** | **Updated: October 2024** | **Обновлено: Октябрь 2024**
Pine Script® Indikator
von Glazeikin
Level Founder indicatorQuesto strumento, ideato per l'individuazione dei livelli orizzontali sensibili si prepone l'obiettivo di semplificare la lettura tecnica dei grafici. Alla base di questo indicatore c'è il concetto di volatilità, inteso come scontro tra domanda ed offerta, come escursione delle forze nel campo di battaglia fino alla determinazione del prezzo finale di ogni candela. Di fatto, andando a cogliere quella che è la volatilità candela per candela, l'indicatore la calcola in termini assoluti rendendola un numericamente comparabile, in un range tra 0 e 100. Quando questo valore tocca i 100 si genera un picco di volatilità, il quale va ad identificare un punto di attenzione sul grafico di uno strumento. In corrispondenza di questi picchi si osserva dove la battaglia tra compratori e venditori si è conclusa, ovvero dove domanda ed offerta si sono incontrati per definire un prezzo: la chiusura di candela. In corrispondenza di tale prezzo si ha, quindi, un accordo certo tra domanda ed offerta dopo un periodo di contrattazione volatile, andando a certificare quello che è un livello di prezzo "sudato" per un determinato sottostante. Tale soglia si traduce in un livello orizzontale sensibile, che in futuro (avendo il mercato memoria degli scontri passati) potrà comportarsi da supporto o da resistenza, a seconda della situazione. In breve quindi, si traccia una linea orizzontale in corrispondenza delle chiusure di candela che condividono un picco sull'indicatore "Level Founder Indicator". Funziona su ogni time-frame e sottostante. N.B. A ridosso di questi livelli si possono cercare pattern per l'operatività oppure cercare delle rotture di questi livelli per delle conferme/inversioni, spaziando dal trading intraday all'investimento di lungo periodo. ENGLISH VERSION: This tool, designed to identify sensitive horizontal levels, aims to simplify the technical reading of charts. This indicator is based on the concept of volatility, understood as the clash between supply and demand, the oscillation of forces on the battlefield until the final price of each candlestick is determined. By capturing the volatility candlestick by candlestick, the indicator calculates it in absolute terms, making it numerically comparable, within a range between 0 and 100. When this value reaches 100, a volatility spike is generated, which identifies a point of focus on an instrument's chart. At these peaks, we observe where the battle between buyers and sellers has concluded, that is, where supply and demand have met to define a price: the candlestick's close. At this price, therefore, a definite agreement between supply and demand occurs after a period of volatile trading, certifying what is a "hard-earned" price level for a given underlying asset. This threshold translates into a sensitive horizontal level, which in the future (given the market's memory of past clashes) could act as support or resistance, depending on the situation. In short, a horizontal line is drawn at the candlestick closes that share a peak on the "Level Founder Indicator." It works on any timeframe and underlying asset. N.B.: Near these levels, you can look for trading patterns or look for breakouts of these levels for confirmations/reversals, ranging from intraday trading to long-term investing.
Pine Script® Indikator
von matteomazzero2002
Candle count, with simple numberWhat it does Counts the length of same-color candle streaks (consecutive bullish or bearish bars) and prints the running number above each bar: e.g., “1, 2, 3…”; when color flips, it restarts at “1”. Prime numbers (2, 3, 5, 7, 11, 13) are emphasized by rendering one size step larger and with a user-selected color. Labels are pinned to each bar (anchored by bar index and price), so they do not drift when you pan or zoom the chart. How it works Determines candle direction: bullish if close > open, bearish if close < open. If the current bar has the same direction as the previous bar, the counter increments; otherwise it resets to 1. For values 2, 3, 5, 7, 11, 13 the number is highlighted (bigger + custom color). Each number is drawn just above the bar’s High with a configurable offset. The script does not repaint on history. During the live bar, the number updates in real time (as expected). Settings Digits size — Base text size (Tiny / Small / Normal / Large / Huge). Prime numbers are automatically shown one step larger than the base size. Offset above bar (ticks) — Vertical offset from the bar’s High, in instrument ticks. Prime numbers color — Text color used specifically for prime numbers (non-prime digits are white). How to read & use it Rising momentum. Long streaks (e.g., 5–7+) suggest strong directional moves with few pullbacks. Early pause/mean-reversion hints. After a long streak, the appearance of the opposite color (counter resets to “1”) often coincides with a pause or minor retrace. Research & statistics. Quickly see which streak lengths are common on your market/timeframe (e.g., “How often do 3–5 bar runs occur?”). Trade management. You can tie partial exits to specific streak lengths (2, 3, 5…) or reduce risk when the counter flips back to “1”. Why it’s useful Provides a clean, numeric view of momentum with zero smoothing or lag. Works on any symbol and timeframe. Prime-number emphasis makes important counts pop at a glance. Pinned labels stay exactly above their bars, ensuring stable, readable visuals at any zoom level. Notes Doji bars (close == open) are treated as no direction and reset the streak. This is a context tool, not a standalone buy/sell signal. Combine it with your entry/exit framework. Very dense charts may hit platform label limits; the script raises the limit, but extremely long histories on very low timeframes can still be heavy.
Pine Script® Indikator
von Buyhim
Fractal Strength OscillatorThe Fractal Strength Oscillator Indicator combines the Relative Strength Index (RSI) and Fractal Dimension Index (FDI) to identify market momentum and trend direction. By integrating RSI's momentum signals with FDI's fractal-based trend analysis, this indicator provides clear visual cues for bullish and bearish conditions through colored plots and price bars. How It Works RSI Calculation: Computes RSI based on a user-selected price source (default: Close) over a configurable period. Optional smoothing with various moving average types (e.g., SMA, EMA, ALMA) enhances signal clarity. FDI Calculation: Measures market complexity using a fractal dimension over a user-defined period (default: 20). A threshold (default: 1.45) determines trend strength. Trend Logic Bullish Signal: RSI > 55 or FDI < threshold indicates upward momentum Bearish Signal: RSI < 45 or FDI > threshold indicates downward momentum Customization & Parameters RSI Parameters: RSI length, smoothing option , MA type, MA length, ALMA sigma FDI Parameters: FDI length, trend threshold. Trading Applications Momentum Trading: Use RSI and FDI signals for entry/exit points. Trend Confirmation: Bar coloring aligns with trend signals. Reversal Detection: Identify shifts when RSI or FDI crosses thresholds Final Note The Fractal Strength Oscillator Indicator is a straightforward tool for traders seeking momentum and trend insights. Its combination of RSI, FDI, and visual cues supports informed trading decisions. Backtest thoroughly and use within a broader strategy. This indicator is for educational purposes and not financial advice.
Pine Script® Indikator
von SurgeQuant
Validated Order Blocks with Fib LevelsThis indicator automatically identifies and displays Smart Money Concepts (SMC) order blocks based on market structure breaks: How it works: Bearish Order Blocks (Red): Marks the last bullish candle before a swing high. The OB becomes valid when price breaks below the previous swing low, indicating institutional selling zones. Drawn from the candle's close (body top) to its low (bottom wick). Bullish Order Blocks (Green): Marks the last bearish candle before a swing low. The OB becomes valid when price breaks above the previous swing high, indicating institutional buying zones. Drawn from the candle's high (top wick) to its close (body bottom). Features: Three Fibonacci retracement levels (50%, 75%, 100%) for each order block Fib 100% faces downward on bearish OBs and upward on bullish OBs Auto-validation: OBs are removed when price closes through them Customizable: Adjustable swing detection, timeframe selection, and OB display limits Optional Break of Structure (BOS) markers to show when OBs activate Works on any timeframe with HTF analysis support Perfect for identifying key institutional support/resistance zones and potential reversal areas.
Pine Script® Indikator
von alexbarretomtz2011
3
Buyer/Seller DominanceBuyer/Seller Dominance Indicator The Buyer/Seller Dominance indicator is a sophisticated market analysis tool that combines Market Profile methodology with volume analysis to identify which side of the market is in control. It analyzes price distribution across a higher timeframe by calculating the Point of Control (POC) and Value Area, then evaluates where the current price sits relative to these key levels. The indicator processes Time Price Opportunity (TPO) data across 20 price channels to build a comprehensive volume profile of each trading session. The dominance score is calculated using multiple factors including price position relative to POC, Value Area boundaries, volume imbalance between upper and lower profile sections, price momentum, and volume trends. This multi-factor approach provides a robust measure of market sentiment, smoothed using an EMA to filter out noise. The resulting dominance histogram visually represents whether buyers (positive values) or sellers (negative values) are controlling the market. The indicator generates clear buy and sell signals when dominance crosses key threshold levels, with additional visual aids including background coloring to show market state (buyer/seller/neutral), overbought/oversold levels at ±50, and an information table displaying current market conditions. It's fully customizable with adjustable timeframes, sensitivity settings, Value Area percentages, and color schemes to suit different trading styles and preferences.RetryClaude can make mistakes. Please double-check responses.
Pine Script® Indikator
von Smart-Day-Trader
FVG + FIBONACCIThe FVG + FIBONACCI indicator is a sophisticated trading tool that combines Fair Value Gap (FVG) detection with Fibonacci analysis across multiple timeframes. It automatically identifies bullish and bearish Fair Value Gaps - price areas where there is no overlap between consecutive candles, creating "gaps" that often act as significant support and resistance zones. The indicator works on any selected higher timeframe while displaying results on the current chart, making it versatile for various trading strategies and timeframe analyses. What sets this indicator apart is its integration of Fibonacci retracement levels within each detected FVG zone. Once a Fair Value Gap is identified, the indicator automatically draws key Fibonacci levels (23.6%, 38.2%, 50%, 61.8%, and optionally 78.6%) within the gap, providing precise entry and exit points for traders. Additionally, it offers Fibonacci extensions (127.2%, 161.8%, and 261.8%) that project potential price targets beyond the FVG boundaries, helping traders plan their profit-taking strategies more effectively. The indicator includes comprehensive customization options, allowing users to control the appearance of FVG zones, Fibonacci levels, and extension lines with different colors and styles. It features intelligent zone management with configurable maximum counts and extension lengths, automatic validity checking that grays out filled gaps, and multiple alert conditions for when price enters FVG zones or touches Fibonacci levels. The tool is designed for both swing and intraday traders who want to combine the powerful concepts of Fair Value Gaps with precise Fibonacci-based entry and exit strategies.
Pine Script® Indikator
von Smart-Day-Trader
FVG (Fair Value Gaps)The FVG (Fair Value Gaps) indicator is a sophisticated technical analysis tool designed to identify and display fair value gaps on trading charts across multiple timeframes. Fair value gaps represent price inefficiencies that occur when there's a complete separation between consecutive candles, creating an unfilled price zone. The indicator detects these gaps by analyzing three consecutive candles: it identifies bullish FVGs when a green middle candle creates a gap where the high of the left candle is below the low of the right candle, and bearish FVGs when a red middle candle creates a gap where the low of the left candle is above the high of the right candle. The indicator offers comprehensive customization options and intelligent filtering capabilities. Users can select any higher timeframe for FVG detection while viewing on lower timeframes, choose to display only bullish or bearish gaps, and optionally filter for large candles only to focus on more significant market inefficiencies. The system includes automatic management features such as limiting the maximum number of displayed FVGs to prevent chart clutter, customizable extension lengths for forward projection, and a validation system that continuously monitors whether gaps remain unfilled or have been invalidated by subsequent price action. Visually, the indicator represents FVGs as colored rectangular boxes with dashed border lines, using green for bullish gaps and red for bearish gaps with full transparency control. When FVGs become invalid (filled by price), they automatically change to gray coloring to indicate their status. The indicator includes real-time alert functionality that triggers when price enters or touches FVG zones, making it valuable for both manual trading decisions and automated trading strategies. Additionally, it features a built-in Telegram channel reference for community support and educational resources.
Pine Script® Indikator
von Smart-Day-Trader
ATR SPREADThis is a comprehensive ATR SPREAD indicator for TradingView that combines volatility monitoring with spread analysis. Here's what it does and why it's useful: Core Functionality ATR Progress Tracking: Monitors how much of the daily ATR (Average True Range) has been "consumed" during the current trading day Calculates progress from two reference points: day's open and previous day's close Displays progress as percentages or absolute values Provides color-coded visual feedback (green → yellow → orange → red) based on ATR consumption levels Spread Monitoring with Advanced Filtering: Tracks current market spreads using multiple methods (minute high-low ranges, tick-to-tick differences) Calculates rolling average spread to establish baseline conditions Implements sophisticated filtering to exclude anomalous spread readings that could skew analysis Key Features Smart Filtering System: Automatically filters out abnormal spreads during session opens Excludes spreads that are too large relative to price or ATR Removes outliers that exceed normal spread multiples Maintains data quality for accurate analysis Multi-Level Alert System: ATR threshold alerts (50%, 80%, 100% consumption) Customizable warning threshold (default 70%) Spread expansion warnings and alerts Session start notifications Professional Dashboard: Customizable information panel showing real-time metrics Multiple positioning options and visual themes Displays ATR status, progress percentages, current/average spreads Color-coded status indicators for quick assessment Trading Applications Risk Management: Helps traders understand how much daily volatility has been used up Assists in position sizing based on remaining expected movement Identifies periods of unusual market conditions Market Condition Assessment: Monitors liquidity conditions through spread analysis Detects when spreads widen beyond normal levels Filters out unreliable data during volatile periods Entry/Exit Timing: High ATR consumption may suggest limited further movement Low ATR consumption early in the day might indicate potential for larger moves Spread conditions help assess execution quality expectations This indicator is particularly valuable for intraday traders, scalpers, and anyone who needs to monitor market microstructure conditions alongside volatility metrics. It provides a comprehensive view of both price movement potential (ATR) and execution environment quality (spreads) in a single, professional-grade tool.
Pine Script® Indikator
von Smart-Day-Trader
FVGFVG (Fair Value Gap) Indicator The Fair Value Gap (FVG) indicator is a powerful tool designed to identify price imbalance zones that often act as critical support and resistance levels in the market. An FVG occurs when there is a gap between the high of one candle and the low of another candle two periods away, creating an unfilled price area that the market tends to revisit. These zones represent areas where institutional orders may be waiting and can provide high-probability trading opportunities. This indicator automatically detects both bullish and bearish FVGs across any selected timeframe while ensuring complete reliability with no repainting. It uses only confirmed bar data with lookahead protection, making it suitable for live trading and backtesting. The tool features customizable visual elements including zone colors, transparency levels, and timeframe labels, along with automatic mitigation tracking that monitors when FVGs get filled by price action. Key features include multi-timeframe analysis, extending zones to the right for ongoing relevance, flexible display options for both active and mitigated FVGs, and built-in alert system for new FVG formations. The indicator also provides comprehensive labeling options and maintains a clean chart by automatically managing the maximum number of displayed zones, making it an essential tool for traders following smart money concepts and institutional trading strategies.
Pine Script® Indikator
von Smart-Day-Trader
Breaout and followthroughThis indicator is designed to identify and highlight a single, powerful entry signal at the beginning of a new trend. It filters for high-volatility breakout bars that show strong directional conviction, helping traders catch the initial momentum of a potential move. It will only paint one bullish or bearish signal after a trend change is detected, preventing repeat signals during a sustained move. Core Concept The indicator combines four key concepts to generate high-probability signals: Trend Direction: It first establishes the overall trend (bullish or bearish) using a configurable Exponential or Simple Moving Average (EMA/SMA). Volatility Expansion: It looks for bars with a larger-than-average range by comparing the bar's size to the Average True Range (ATR). This helps identify moments of increased market interest. Closing Strength (IBS): It uses the Internal Bar Strength (IBS) to measure directional conviction. A high IBS (closing near the top) suggests bullish strength, while a low IBS (closing near the bottom) suggests bearish pressure. Breakout Confirmation: As an optional but powerful filter, it can confirm the signal by ensuring the bar is breaking above the high or below the low of a user-defined number of previous bars. A signal is only generated on the first bar that meets all these criteria after the price crosses the trend-defining moving average, making it ideal for capturing the start of a new swing. Features Bullish Signals (Green): Highlights the first bar in an uptrend that is larger than the ATR, closes with a high IBS (>70), and optionally breaks out above the recent highs. Bearish Signals (Red): Highlights the first bar in a downtrend that is larger than the ATR, closes with a low IBS (<30), and optionally breaks out below the recent lows. "First Signal Only" Logic: The script is hard-coded to show only the initial signal in a new trend, filtering out noise and redundant signals. Fully Customizable Trend Filter: Choose between EMA or SMA for trend definition. Set the MA length (default is a short-term 7-period MA). Option to show or hide the moving average on the chart. Optional Breakout Filter: Enable or disable the requirement for the signal bar to break the high/low of previous bars. Customize the lookback period for the breakout confirmation. How to Use This indicator can be used as a primary signal for a trend-following or momentum-based trading system. Look for a Green Bar (Bullish Signal): This suggests the start of a potential uptrend. Consider it a signal for a long entry. A logical stop-loss could be placed below the low of the highlighted signal bar. Look for a Red Bar (Bearish Signal): This suggests the start of a potential downtrend. Consider it a signal for a short entry. A logical stop-loss could be placed above the high of the highlighted signal bar. Adjust Settings: Use the settings menu to configure the indicator to your preferred market and timeframe. A longer Trend MA Length will result in fewer, more long-term signals, while a shorter length will be more responsive. As with any tool, this indicator is best used in conjunction with other forms of analysis, such as market structure, support/resistance levels, and proper risk management.
Pine Script® Indikator
von Trading_Doji