Auf geht's

Candlestick analysis

Colby Cheese VWAP Setup [v2.0]🔧 Core Refactors • Imbalance function fixed: • Removed invalid usage. • Now uses for past bar references. • Bias checks are handled outside the function with proper series indexing. • Bias alignment: • Added and so CHoCH signals only fire when price change agrees with EMA bias. • Swing reset: • After a valid CHoCH, and reset to so stale levels don’t keep firing. • Line/label management: • CHoCH lines and labels now reuse persistent IDs (, ) instead of spamming new objects every trigger. ✨ New Features • Anticipation mode: • Blue “Anticipate” lines/labels drawn when delta + bias align before CHoCH confirmation. • Helps you see potential setups earlier. • Entry zone lines: • Solid green/red lines drawn at entry levels when is enabled. • Separate from FRVP dashed zones. • Stop‑loss lines: • Orange dotted lines drawn opposite the entry zone when is enabled. • Gives a visual risk marker. 🎨 Visual Consistency • Candle coloring simplified: white candles only when CHoCH triggers. • FRVP zones remain dashed lines with “Enter” labels. • Anticipation zones are blue solid lines. • Entry zones are solid green/red. • Stop‑loss lines are orange dotted.
Pine Script® Indikator
von dscottmuller
Timeframe Overlay 24HrDaily High–Low Box (00:00–23:59) This indicator highlights each trading day with a shaded box spanning from 00:00 to 23:59 (based on the selected timezone) and covering the day’s highest and lowest price. • Green box when the day closes above its open • Red box when the day closes below its open • Historical days are fully drawn for easy comparison • Current day box builds dynamically as new candles form Useful for visualising daily range, market bias, and intraday structure across all timeframes.
Pine Script® Indikator
von Knotty0807
Liquidity Sweep Reentry ToolkitHere’s a clear breakdown of what your Liquidity Sweep Reentry Toolkit script does, and how you can use it on your charts: 🔎 Script Breakdown 1. Visual Controls (Inputs) • : Master toggle to turn all visuals on/off. • : Show labels when a liquidity sweep + ChoCh condition occurs. • : Plot green/red triangles for bullish/bearish reentry signals. • : Prevent multiple signals within the same swing. • : Show HH/HL/LL/LH market structure letters. • : Slider to adjust how dim the background of HH/HL/LL/LH labels appear. 2. Core Conditions • Defines simple bullish () and bearish () candles. • is a placeholder for your Change of Character logic. 3. Sweep Detection • : Detects when price makes a new high compared to the last 5 bars. • : Detects when price makes a new low compared to the last 5 bars. 4. Restriction Flags • Tracks whether a sweep signal has already triggered in the current swing. • Resets when sweeps end, so new signals can appear. 5. Composite Triggers • : Fires when bullish candle + buy-side sweep + ChoCh condition align. • : Fires when bearish candle + sell-side sweep + ChoCh condition align. 6. Visual Labels • Gold labels mark “BS Sweep + ChoCh” or “SS Sweep + ChoCh” events. • Green triangle below bar = bullish reentry. • Red triangle above bar = bearish reentry. • Blue HH/HL/LL/LH labels narrate market structure pivots, with adjustable transparency. 7. Alerts • Alerts can be set for bullish or bearish sweep reentry triggers, so you get notified when conditions align. 📘 How to Use It 1. Apply to Chart Add the script to your TradingView chart (works best on intraday timeframes like 5‑minute). 2. Configure Visuals • Use the Visual Controls panel to toggle features on/off. • Adjust the Label Transparency slider to dim or brighten the HH/HL/LL/LH labels. 3. Interpret Signals • Gold labels show when a sweep + ChoCh condition occurs. • Triangles mark potential reentry points (green = bullish, red = bearish). • HH/HL/LL/LH labels narrate market structure shifts for clarity. 4. Set Alerts • Use the built‑in alert conditions to get notified when bullish or bearish sweep reentry triggers fire. 👉 In short: this toolkit helps you spot liquidity sweeps, confirm with ChoCh, and visualize reentry signals, while also narrating market structure pivots. It’s modular, so you can toggle features depending on how much visual clutter you want. 🛠 Workflow Example 1. Setup • Apply the script to your chart (e.g., 5‑minute S&P futures). • In the indicator settings, decide which visuals you want: • Turn on Sweep + ChoCh labels if you want to see gold tags narrating liquidity events. • Keep Entry triangles on to highlight actionable reentry points. • Adjust the Label Transparency slider so HH/HL/LL/LH structure labels are dim enough not to clutter. 2. Watch for Sweeps • As price pushes above recent highs → a Buy‑side Sweep is detected. • As price dips below recent lows → a Sell‑side Sweep is detected. • If ChoCh logic is true at the same time, you’ll see a gold label (“BS Sweep + ChoCh” or “SS Sweep + ChoCh”). 3. Confirm Reentry • If conditions align (bullish candle + buy‑side sweep + ChoCh), you’ll see a green triangle below the bar. • If bearish candle + sell‑side sweep + ChoCh, you’ll see a red triangle above the bar. • These triangles are your potential reentry triggers. 4. Narrate Market Structure • HH/HL/LL/LH labels appear at pivots, giving you a running commentary of structure shifts. • Example: HH → HL → HH shows bullish continuation; LH → LL → LH shows bearish pressure. • Use the transparency slider to keep these labels subtle but visible. 5. Alerts • Set alerts for “Bullish Sweep Reentry” or “Bearish Sweep Reentry” so you don’t miss signals even if you’re away from the screen. 📘 How to Use in Practice • Intraday trading: On a 5‑minute chart, use the toolkit to spot liquidity grabs and confirm reentry points. • Narration: The HH/HL/LL/LH labels help you keep track of structure without manually marking pivots. • Decision making: Gold labels + triangles = potential trade setups. Structure labels = context for trend bias. • Customization: Dim labels when you want a cleaner chart, brighten them when you’re focused on structure. 👉 In short: this script gives you a modular toolkit — sweeps, ChoCh confirmation, reentry signals, and structure narration — all adjustable so you can tailor the visuals to your workflow. 📈 Bullish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent highs, building liquidity above. 2. Liquidity Sweep • Price spikes above the prior swing high → the script detects a buy‑side sweep. • A gold label appears: “BS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bullish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential reentry setup. 4. Reentry Trigger • The script plots a green triangle below the bar. • This marks a bullish sweep reentry signal: price grabbed liquidity and is now showing strength. 5. Market Structure Narration • At the same time, the HH/HL labels update: • The sweep bar prints a new HH. • The next pivot low prints an HL. • This narrates bullish continuation: HH → HL → HH. 6. Trade Decision • You can use the green triangle as your entry cue. • The HH/HL narration gives you confidence that structure supports the trade. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: below the HL pivot or sweep low. • Target: next liquidity pool above, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Green triangle = actionable bullish reentry trigger. • HH/HL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean. 📉 Bearish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent lows, building liquidity underneath. 2. Liquidity Sweep • Price spikes below the prior swing low → the script detects a sell‑side sweep. • A gold label appears: “SS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bearish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential bearish reentry setup. 4. Reentry Trigger • The script plots a red triangle above the bar. • This marks a bearish sweep reentry signal: price grabbed liquidity below and is now showing weakness. 5. Market Structure Narration • At the same time, the LH/LL labels update: • The sweep bar prints a new LL. • The next pivot high prints a LH. • This narrates bearish continuation: LH → LL → LH. 6. Trade Decision • You can use the red triangle as your entry cue. • The LH/LL narration gives you confidence that structure supports the short. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: above the LH pivot or sweep high. • Target: next liquidity pool below, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Red triangle = actionable bearish reentry trigger. • LH/LL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean.
Pine Script® Indikator
von dscottmuller
Hour-End SMAThis indicator calculates a Simple Moving Average using true RTH hour-end prices (10:00–16:00 ET), solving TradingView’s 1H RTH candle misalignment issue. The SMA is derived from 30-minute bars to ensure sufficient historical depth, making it reliable even for large lengths such as SMA100 and SMA200. Designed for traders who rely on hour-end moving averages while working in TradingView. Example: Hour-End SMA matches TC2000 Simple Moving Average values
Pine Script® Indikator
von skywalkerhim
Momentum Flow Module 1 (Bar/Candlestick Classification)Every candlestick on the chart can be categorized as either a trend bar or a trading range bar. Trend bars are further classified as significant or insignificant, while trading range bars are divided into inside, outside, overlap, reversal, and implied reversal types. This indicator automatically identifies and labels each category to help traders make more informed decisions. For instance, a sequence of significant bearish trend bars within an ongoing bull trend indicates weakening bullish momentum. Similarly, if a bull trend lacks strong bull trend bars, it suggests diminishing buying pressure or the early signs of a potential reversal
Pine Script® Indikator
von punithstartup
Liquidity Sell Signal V2 [StrategyLAB_]Liquidity Sell Signal V2 Liquidity Sell Signal V2 is a TradingView indicator designed to help you spot high-probability Sell setups (reversal / pullback entries) using liquidity concepts around Buy-Side Liquidity (BSL) , combined with a bearish confirmation candle pattern. OANDA:XAUUSD This script will: Automatically detect and plot BSL (Swing High) levels based on your selected Swing Strength. Visually “fade” levels once price has broken above them. Print a down triangle when a valid Bearish Liquidity Triangle forms at a qualified BSL area. How it works 1) Identify Buy-Side Liquidity (BSL) The indicator detects pivot highs using Swing Strength. Each pivot high is drawn as a horizontal BSL level, keeping up to Max Buy Side Liquidity (BSL) Levels. 2) Bearish confirmation (Liquidity reaction) A Sell signal triggers only when a bearish candle structure appears, suggesting strong selling pressure and a potential reversal after a liquidity sweep near/above BSL. 3) Noise filter (Avoid “body-cut” levels) The script checks whether the BSL level has been repeatedly cut through candle bodies in prior bars. If the level is considered “dirty” based on olderBodyLookback, it is filtered out to reduce false signals. How to use Suggested settings Swing Strength Lower (5–8): more levels, faster signals, but more noise. Higher (12–20): fewer levels, cleaner zones, better for swing. Max BSL Levels: increase if you want to keep more historical liquidity levels. Filter lookback older bodies: increase to filter more aggressively (fewer signals, cleaner quality). Entry idea (example) Wait for a Sell triangle to appear (signal prints on candle close). Prefer signals that align with: a major swing high / key resistance, clear rejection (wick / bearish reaction), confluence with HTF supply, trendline, session, etc. SL/TP idea (example) SL: above the most recent swing high / above the BSL zone with a safety buffer. TP: toward imbalance fill, previous lows (SSL), or a fixed RR such as 1:2 / 1:3. Important notes This is a probability tool, not a guaranteed signal. Best results come from combining with market structure (BOS/CHOCH), supply/demand, HTF levels, and session context. The script uses barstate.isconfirmed, so signals appear only after the candle closes (non-repainting signals). OANDA:EURUSD
Pine Script® Indikator
von StrategyLAB_
5-Min ORB - NY Session5-Minute Opening Range Breakout (ORB) - NY Session Indicator This TradingView indicator identifies and plots the Opening Range Breakout (ORB) based on the first 5-minute candle of the New York trading session. Key Features: Automatic Detection: Automatically detects the NY session open (default 9:30 AM ET, fully customizable) and captures the high/low of the first 5-minute bar Multi-Timeframe Support: Works on any chart timeframe (1-min, 3-min, 15-min, etc.) by requesting 5-minute data Dynamic Price Targets: Calculates both bullish (above ORB high) and bearish (below ORB low) price targets based on the opening range size Configurable Targets: Set up to 10 price target levels on each side, with targets spaced proportionally to the ORB range Extended Lines: All lines automatically extend ahead of the current bar by a configurable number of minutes for better forward visibility Price Labels: Optional price labels display exact values at the end of each level Midpoint Line: Optional dashed midpoint line shows the center of the opening range Custom Styling: Fully customizable colors and transparency for all lines and labels How It Works: The indicator measures the distance between the ORB high and midpoint, then projects additional targets at equal intervals above the high (bullish targets in green) and below the low (bearish targets in red). Why Use a 5-Minute ORB? Tighter Range: The 5-minute opening range is typically smaller than the 15-minute range, providing more precise entry and exit levels Earlier Signals: Breakouts are identified sooner, allowing for faster reaction times Scalping-Friendly: Ideal for day traders and scalpers who prefer shorter timeframes and quicker price movements Higher Probability Zones: The narrower range often creates more reliable support/resistance levels for intraday trading Best Practices: Works best on liquid instruments with high volume during NY session open Combine with volume analysis to confirm breakout validity Consider using the first target as a take-profit level for quick scalps Watch for false breakouts within the first 15-30 minutes of the session
Pine Script® Indikator
von elitesingh
Clean Market Structure & Trend Confirmation ( Updated ) CLEAN MARKET STRUCTURE & TREND CONFIRMATION — 24H CONTINUATION EDITION This indicator is designed to help traders identify clear market direction, confirm trend strength, and manage trades with structured take-profit and stop levels. It works by aligning trend, momentum, and structure before showing any BUY or SELL signal. Signals are selective by design to reduce noise and false entries. This version includes an optional continuation mode, allowing additional high-quality signals when trends persist, while still maintaining discipline and structure. HOW TO LOAD AND USE (IMPORTANT) Add the indicator to your chart. Recommended symbols: SPY, QQQ, ES1!, NQ1! (works on stocks and futures). Recommended timeframes: • 5-minute (default and most balanced) • 1-minute (faster, more active, optional) No refresh is required each day. The script resets automatically. RECOMMENDED DEFAULT SETTINGS • 9:25 Bias Filter: ON • Continuation Signals: ON • TP Ladder: ON • Keep Only Most Recent TP Ladder: ON • Execute on Candle Close: optional (ON = safer, OFF = faster) These defaults provide the best balance between discipline and opportunity. HOW THE RIBBON WORKS (CORE TREND FILTER) The ribbon is the foundation of the system. • Teal ribbon = bullish trend • Red ribbon = bearish trend • Gray ribbon = no-trade zone The system avoids signals in gray conditions to reduce chop. Only trade in the direction of the ribbon. BULL AND BEAR DOTS Bull and Bear dots mark confirmed trend flips. • Bull dot = trend has flipped bullish • Bear dot = trend has flipped bearish These are not trades by themselves. They are early awareness signals that help you prepare for potential entries. BUY AND SELL ARROWS (TRADE SIGNALS) BUY and SELL arrows appear only when: • Ribbon direction is aligned • Trend structure confirms • Momentum and volume agree • Market conditions are favorable These arrows represent high-probability trade opportunities, not constant signals. TAKE PROFIT & STOP LEVELS When a BUY or SELL arrow prints: • TP1, TP2, TP3 levels appear automatically • A STOP level is plotted automatically • Levels are based on volatility and adjust to market conditions Only the most recent trade plan is shown to keep the chart clean. CONTINUATION MODE (WHAT’S DIFFERENT) Compared to the original version: • This version can take more than one trade per day • It allows new trades when trends reset and realign • It does NOT chase every candle • It still requires full confirmation before each signal Think of this as adaptive trend participation, not aggressive scalping. 1-MINUTE VS 5-MINUTE USE • 5-minute: fewer signals, higher confidence, best for most users • 1-minute: earlier entries, more activity, requires discipline You do NOT need to switch back and forth constantly. Pick one timeframe and stay consistent. IMPORTANT NOTES FOR NEW USERS • Fewer signals is a feature, not a flaw • Missing a move is better than forcing a bad trade • Always manage risk and position size • This indicator assists decision-making — it does not predict the future DISCLAIMER This indicator is for educational purposes only. It is not financial advice. Trading involves risk, and you are responsible for all trading decisions. Use proper risk management and only trade with capital you can afford to lose.
Pine Script® Indikator
von webemoon
Clean Market Structure & Trend Confirmation ( UPDATED ) CLEAN MARKET STRUCTURE & TREND CONFIRMATION — 24H CONTINUATION EDITION This indicator is designed to help traders identify clear market direction, confirm trend strength, and manage trades with structured take-profit and stop levels. It works by aligning trend, momentum, and structure before showing any BUY or SELL signal. Signals are selective by design to reduce noise and false entries. This version includes an optional continuation mode, allowing additional high-quality signals when trends persist, while still maintaining discipline and structure. HOW TO LOAD AND USE (IMPORTANT) Add the indicator to your chart. Recommended symbols: SPY, QQQ, ES1!, NQ1! (works on stocks and futures). Recommended timeframes: • 5-minute (default and most balanced) • 1-minute (faster, more active, optional) No refresh is required each day. The script resets automatically. RECOMMENDED DEFAULT SETTINGS • 9:25 Bias Filter: ON • Continuation Signals: ON • TP Ladder: ON • Keep Only Most Recent TP Ladder: ON • Execute on Candle Close: optional (ON = safer, OFF = faster) These defaults provide the best balance between discipline and opportunity. HOW THE RIBBON WORKS (CORE TREND FILTER) The ribbon is the foundation of the system. • Teal ribbon = bullish trend • Red ribbon = bearish trend • Gray ribbon = no-trade zone The system avoids signals in gray conditions to reduce chop. Only trade in the direction of the ribbon. BULL AND BEAR DOTS Bull and Bear dots mark confirmed trend flips. • Bull dot = trend has flipped bullish • Bear dot = trend has flipped bearish These are not trades by themselves. They are early awareness signals that help you prepare for potential entries. BUY AND SELL ARROWS (TRADE SIGNALS) BUY and SELL arrows appear only when: • Ribbon direction is aligned • Trend structure confirms • Momentum and volume agree • Market conditions are favorable These arrows represent high-probability trade opportunities, not constant signals. TAKE PROFIT & STOP LEVELS When a BUY or SELL arrow prints: • TP1, TP2, TP3 levels appear automatically • A STOP level is plotted automatically • Levels are based on volatility and adjust to market conditions Only the most recent trade plan is shown to keep the chart clean. CONTINUATION MODE (WHAT’S DIFFERENT) Compared to the original version: • This version can take more than one trade per day • It allows new trades when trends reset and realign • It does NOT chase every candle • It still requires full confirmation before each signal Think of this as adaptive trend participation, not aggressive scalping. 1-MINUTE VS 5-MINUTE USE • 5-minute: fewer signals, higher confidence, best for most users • 1-minute: earlier entries, more activity, requires discipline You do NOT need to switch back and forth constantly. Pick one timeframe and stay consistent. IMPORTANT NOTES FOR NEW USERS • Fewer signals is a feature, not a flaw • Missing a move is better than forcing a bad trade • Always manage risk and position size • This indicator assists decision-making — it does not predict the future DISCLAIMER This indicator is for educational purposes only. It is not financial advice. Trading involves risk, and you are responsible for all trading decisions. Use proper risk management and only trade with capital you can afford to lose.
Pine Script® Indikator
von webemoon
Clean Market Structure & Trend Confirmation(Continuation 24H)CLEAN MARKET STRUCTURE & TREND CONFIRMATION — 24H CONTINUATION EDITION This indicator is designed to help traders identify clear market direction, confirm trend strength, and manage trades with structured take-profit and stop levels. It works by aligning trend, momentum, and structure before showing any BUY or SELL signal. Signals are selective by design to reduce noise and false entries. This version includes an optional continuation mode, allowing additional high-quality signals when trends persist, while still maintaining discipline and structure. HOW TO LOAD AND USE (IMPORTANT) Add the indicator to your chart. Recommended symbols: SPY, QQQ, ES1!, NQ1! (works on stocks and futures). Recommended timeframes: • 5-minute (default and most balanced) • 1-minute (faster, more active, optional) No refresh is required each day. The script resets automatically. RECOMMENDED DEFAULT SETTINGS • 9:25 Bias Filter: ON • Continuation Signals: ON • TP Ladder: ON • Keep Only Most Recent TP Ladder: ON • Execute on Candle Close: optional (ON = safer, OFF = faster) These defaults provide the best balance between discipline and opportunity. HOW THE RIBBON WORKS (CORE TREND FILTER) The ribbon is the foundation of the system. • Teal ribbon = bullish trend • Red ribbon = bearish trend • Gray ribbon = no-trade zone The system avoids signals in gray conditions to reduce chop. Only trade in the direction of the ribbon. BULL AND BEAR DOTS Bull and Bear dots mark confirmed trend flips. • Bull dot = trend has flipped bullish • Bear dot = trend has flipped bearish These are not trades by themselves. They are early awareness signals that help you prepare for potential entries. BUY AND SELL ARROWS (TRADE SIGNALS) BUY and SELL arrows appear only when: • Ribbon direction is aligned • Trend structure confirms • Momentum and volume agree • Market conditions are favorable These arrows represent high-probability trade opportunities, not constant signals. TAKE PROFIT & STOP LEVELS When a BUY or SELL arrow prints: • TP1, TP2, TP3 levels appear automatically • A STOP level is plotted automatically • Levels are based on volatility and adjust to market conditions Only the most recent trade plan is shown to keep the chart clean. CONTINUATION MODE (WHAT’S DIFFERENT) Compared to the original version: • This version can take more than one trade per day • It allows new trades when trends reset and realign • It does NOT chase every candle • It still requires full confirmation before each signal Think of this as adaptive trend participation, not aggressive scalping. 1-MINUTE VS 5-MINUTE USE • 5-minute: fewer signals, higher confidence, best for most users • 1-minute: earlier entries, more activity, requires discipline You do NOT need to switch back and forth constantly. Pick one timeframe and stay consistent. IMPORTANT NOTES FOR NEW USERS • Fewer signals is a feature, not a flaw • Missing a move is better than forcing a bad trade • Always manage risk and position size • This indicator assists decision-making — it does not predict the future DISCLAIMER This indicator is for educational purposes only. It is not financial advice. Trading involves risk, and you are responsible for all trading decisions. Use proper risk management and only trade with capital you can afford to lose.
Pine Script® Indikator
von webemoon
SignalViper ReconYour pre-flight checklist before any trade. Recon, our patent pending technology, synthesizes data from all other indicators into a single, easy-to-read table with plain English market descriptions instead of raw numbers. ▸ Narrative descriptions (e.g., 'Strong bullish momentum building') ▸ Multi-factor summary from all suite indicators ▸ Momentum, trend, volume, S/R proximity in one view ▸ Active warning display (divergence, termination pressure) ▸ Color-coded status for quick visual scanning
Pine Script® Indikator
von signalviper
SignalViper StrikeThe primary trend-following overlay indicator. Strike displays a dynamic cloud showing trend direction, generates BUY/SELL signals when momentum confirms, and provides visual momentum confirmation dots. ▸ Dynamic trend cloud (cyan bullish, magenta bearish) ▸ Entry signals on momentum-confirmed trend changes ▸ Diamond-shaped momentum confirmation dots ▸ Volatility bands show market expansion/contraction ▸ Optional on-chart SL/TP reference levels
Pine Script® Indikator
von signalviper
SignalViper RushThe heart of the SignalViper suite. Rush displays momentum using a 7-level heat gradient color system and includes chop detection dots to identify when the market is trending versus sideways. ▸ 7-level heat gradient visualization (deep magenta to electric cyan) ▸ Chop detection dots (gold=CHOP, cyan=CLEAR) ▸ Real-time info panel with direction, strength %, and state ▸ Proprietary momentum calculation engine ▸ Custom alerts for momentum crosses and state changes
Pine Script® Indikator
von signalviper