INVITE-ONLY SCRIPT
Jackrabbit.modulus.DCA
Aktualisiert
This is the Dollar Cost Averaging (DCA) for the Jackrabbit suite and modulus framework.
The blue line is the current average price of the asset.
The red line is the deviation boundary. Price action must be below this line for buys to be signaled.
The green line is the take profit. Price action must be above this line for a sell signal to be generated.
Here is a list of the settings:
Buy method: DCA or Strategy. DCA allows the module to decide buys based upon the methodology (step, price). Strategy added to the average on the basis of a buy signal from the strategy, but only when it is below the deviation and is the most organic of dollar cost averaging.
Sell Method. Take profit or Steategy. Take Profit sells the asset as soon as the price action crosses above the take profit line. Strategy sells on the basis of a sell signal, but only if it is above the take profit. Selling never occurs at a loss, with the only exception being the exit point.
Methodolgy: Step or Price. Stepping allows a fixed and uniform averaging ant percise intervals of deviation. Price is a very aggressive approach that will drive the average down on the basis of the difference between the average and the current price action. The price methodology is VERY high risk.
Take Profit, which describes the average profit percent of the combined positions.
Deviation, which describes the percent boundary for which price action must drop before additional assets are purchased.
Sideways Breaker: This algorithm breaks the sideways rut by forcing a purchase after X days, minimum 1 day.
Exit Position: Internal stop loss expressed in the number of buys.
It is important that when you establish your sell signal, ALL positions must be sold to ensure the average profit. If required, use a CLOSE ALL message provided by your platform. Also, any platform specific DCA or Safety Orders will cause losses as this script can not track their value. It is recommended that these features not be used.
The Jackrabbit modulus framework is a plug in play paradigm built to operate through TradingView's indicator on indicatior (IoI) functionality. As such, this script receives a signal line from the previous script in the IoI chain, and evaluates the buy/sell signals appropriate to the current analysis.
This script is by invitation only. To learn more about accessing this script, please see my signature or send me a PM. Thank you.
The blue line is the current average price of the asset.
The red line is the deviation boundary. Price action must be below this line for buys to be signaled.
The green line is the take profit. Price action must be above this line for a sell signal to be generated.
Here is a list of the settings:
Buy method: DCA or Strategy. DCA allows the module to decide buys based upon the methodology (step, price). Strategy added to the average on the basis of a buy signal from the strategy, but only when it is below the deviation and is the most organic of dollar cost averaging.
Sell Method. Take profit or Steategy. Take Profit sells the asset as soon as the price action crosses above the take profit line. Strategy sells on the basis of a sell signal, but only if it is above the take profit. Selling never occurs at a loss, with the only exception being the exit point.
Methodolgy: Step or Price. Stepping allows a fixed and uniform averaging ant percise intervals of deviation. Price is a very aggressive approach that will drive the average down on the basis of the difference between the average and the current price action. The price methodology is VERY high risk.
Take Profit, which describes the average profit percent of the combined positions.
Deviation, which describes the percent boundary for which price action must drop before additional assets are purchased.
Sideways Breaker: This algorithm breaks the sideways rut by forcing a purchase after X days, minimum 1 day.
Exit Position: Internal stop loss expressed in the number of buys.
It is important that when you establish your sell signal, ALL positions must be sold to ensure the average profit. If required, use a CLOSE ALL message provided by your platform. Also, any platform specific DCA or Safety Orders will cause losses as this script can not track their value. It is recommended that these features not be used.
The Jackrabbit modulus framework is a plug in play paradigm built to operate through TradingView's indicator on indicatior (IoI) functionality. As such, this script receives a signal line from the previous script in the IoI chain, and evaluates the buy/sell signals appropriate to the current analysis.
This script is by invitation only. To learn more about accessing this script, please see my signature or send me a PM. Thank you.
Versionshinweise
Bug fix: made sure sideways breaker doesn't operate outside a trade.Versionshinweise
Fixed visual distortionVersionshinweise
Added directional movement of a long or short position.Versionshinweise
Bug in signal line directional analysis for short positions.Versionshinweise
Added a signal line.Versionshinweise
Algorithm tuning.Price method now tracks last buy price and requires next buy price to be lower than the last. This always ensures price action is dropping during accumulation.
Step method now tracks deviation as a fixed position from the initial price. This ensures that the deviation is always absolute and is more defensive with regards to the budget.
Versionshinweise
Bug in price method fixed. Buying only occurs as price drops (long). Short direction works as well.Versionshinweise
Added statistics for buys/sells and max buys/sellsBy request, added price aggression. If you do not plan your budget carefully, you will have your entire portfolio wrecked! This is for advanced users ONLY.
Versionshinweise
Signal line expansion to manage buy/sell only scripts within the IoI framework. Added redundancy checks for future expansion and verification.Versionshinweise
Added "Ghosting" or ghost sell signals to address incomplete chart information that may lead to gaps in time data. This is purely diagnostic and should be used with extreme care.Versionshinweise
Simplified ChartVersionshinweise
Added selection dor historic or live data.Versionshinweise
Added trade cycles and average p[rofit. Both can be used in message alerts.Versionshinweise
Fixed visual error in average profit when shorting.Versionshinweise
Rebuilt the entire module to be more effecient and effective. Added additional diagnostics.Versionshinweise
Visual dioagnostics cleanupVersionshinweise
Bug fix in the step equations.Versionshinweise
Hot fix on price aggression.Versionshinweise
Added ability to change color of text items for the take profit, average price, deviation, and price action average.Added a new feature, fuzzy deviation.
Versionshinweise
Added last profit diagnosticsVersionshinweise
Method fpr pulling realtime/historic data has been rewritten. The algorithm is more effective and streamlined.Versionshinweise
Added dynamic functionality between aggressive and defensive price action. This will not really benefit the step method, but is does have a significant impact on the price method.This allows the best of both worlds by choosing trigger points of either the number of purchases or the percentage of the average from the the price.
Versionshinweise
Fixed chart and added limitsVersionshinweise
Added dynamic take profit (DTP).DTP is broken down into a lower and upper value. When both are the same, DTP is disabled and the standard TP mechanics function as normal.
When the lower DTP is less then the upper DTP, TP is set to the lowest value and increments according to the maximum buys per cycle. When the upper DTP is less then the lower DTP, the TP starts as the upper valus and is decreased according to the maximum buys per cycle.
DTP will woek on both Step and Price methods.
Versionshinweise
Polarity correctionVersionshinweise
Simplified and cleaned up settings.Dynamic deviation now has an upper and lower percentage that can fluctuate according to the maximum buys per cycle.
Also dynamic opperations now take place within the current cycle, as well as adapting over the life of total cycles.
Versionshinweise
Manual override added for advanced users to select number of step in between initial value (lower) and final value (upper).Versionshinweise
Added exit percentage. This is not a stop loss in the traditional sense and it functions exactly as exit position in respect that it occurs on the next purchase.Take profit and deviations now support fractional numbers.
Versionshinweise
One off bug fixed with exit positions.Versionshinweise
A long standing and difficult bug is "Sideways breaker" has been finally resolved.Versionshinweise
Added:Shutdown after buys/cycle, This entry shuts down the recipe if the event that buys to cycle exceeds a desired level or the desired accumulation has taken place,
Shutdown after trade cycles, this shuts down the recipe completes the desired number of trade cycles.
Weighted deviation., This weights the deviation based upon the current average price and number of buys per cycle. Allows for a graceful non linear slowing process of accumulation that can dynamically adjust to the current situation.
Versionshinweise
Bug Fix: Minimum weighted effect is not convertage to percentage properly.Versionshinweise
Updated sideways breaker to use a NON retracing candle counting technique.Versionshinweise
Added expert abilities to use organic deviation and take profit.This method can be activated by setting the initial and final values of deviation or take profit to 0. BOTH numbers must be set for this special feature to activate. Also DCA buying is DISABLED for this process. This feature is expert use only and can cause extremwe losses if not properly used. Careful attention must bew taken with this approach as all the normal safeguards are DISABLED.
Versionshinweise
Added feature to hold a position with NO further purchases after user selected positions have been aquired.Versionshinweise
Fixed bug with holding position.Versionshinweise
Added more statisticsVersionshinweise
Updated to version 5 Pine Script.Versionshinweise
Added an escape methodology. Made this module overlay main chart by default.
Versionshinweise
Added a "good enough" test.This evaluation tests the concept that a profit is "good enough" if it is "close enough" to the desired take profit area.
Skript nur auf Einladung
Der Zugriff auf dieses Skript ist auf vom Autor autorisierte User beschränkt und normalerweise kostenpflichtig. Sie können es zu Ihren Favoriten hinzufügen, aber Sie können es nur verwenden, nachdem Sie die Erlaubnis angefordert und vom Autor erhalten haben. Kontaktieren Sie RobertD7723 für weitere Informationen oder folgen Sie den Anweisungen des Autors unten.
TradingView empfiehlt nicht, ein Script zu kaufen, wenn Sie den Autor nicht zu 100 % als vertrauenswürdig halten, oder nicht verstehen, wie das Script funktioniert. In vielen Fällen können Sie auch eine gute und kostenlose Open-Source-Alternative in unseren Community-Scripts entdecken.
Hinweise des Autors
″Please PM me for more information about using this script or visit the link in my signature. Thank you.
Möchten Sie dieses Skript auf einem Chart verwenden?
Warnung: Bitte lesen Sie dies, bevor Sie Zugriff anfordern.
Join my Patreon for exclusive access to Jackrabbit TV,
patreon.com/RD3277
patreon.com/RD3277
Haftungsausschluss
Die Informationen und Veröffentlichungen sind nicht als Finanz-, Anlage-, Handels- oder andere Arten von Ratschlägen oder Empfehlungen gedacht, die von TradingView bereitgestellt oder gebilligt werden, und stellen diese nicht dar. Lesen Sie mehr in den Nutzungsbedingungen.